At full power, how long would it take for the car to accelerate from 0 to 58.0 mph ? neglect friction and air resistance.
For the given problem, we calculate the required time by using the formula P = W/t.
P = [(1/2)mv_f^2 – (1/2)mv_i^2]/ t
The car accelerates from 0 -58 mph, so the power engine will be
P = (1/2) x m x 58^2 / t = 1682 m / t
According to the problem, the engine produces full power so the time required can be calculated as
420.5 m / 1.40 = 1682 m / t
t = 5.6 seconds
Jenny takes a piece of paper and dips it in a bowl of water. The paper is now damp and mushy. Which of the following is/are true about the change that occurs when the paper gets wet?
The answer is Physical change
Write a hypothesis about the effects of magnetic and electric fields. Use the format of "if . . . then . . . because . . ." and be sure to answer the lesson question: "How can magnetic and electric fields be demonstrated?"
Please help!
too late but Sample Response: If a magnetic or electric field is present, materials that generate these fields will interact by attracting or repelling each other because of their magnetic or electric properties.
The magnetic field and electric field can be demonstrated as: If a charge or magnet creates magnetic or electric field, then any other object in their field will interact by attracting or repelling each other because of their magnetic or electric properties and intensity.
What is magnetic or electric field?The imaginary region of space where an object experiences magnetic or electric force respectively.
The electric field is created by the charged particle while the magnetic field is created by the magnet.
Thus, The magnetic field and electric field can be demonstrated as: If a charge or magnet creates magnetic or electric field, then any other object in their field will interact by attracting or repelling each other because of their magnetic or electric properties and intensity.
Learn more about magnetic or electric field.
https://brainly.com/question/12324569
SPJ2
What change in pressure occurs in a party balloon that is squeezed to one-half its volume with no change in temperature?
When a party balloon is squeezed to half of its initial volume with no change in temperature, the pressure inside the balloon doubles due to Boyle's Law, which states that pressure is inversely proportional to volume for an ideal gas.
Explanation:The question pertains to the relationship between volume and pressure of a gas when the temperature is held constant. According to Boyle's Law, the pressure of a gas is inversely proportional to its volume when temperature remains unchanged. If a party balloon is squeezed to one-half its original volume with no change in temperature, the pressure inside the balloon will double.
For example, if the initial pressure inside the balloon (P1) was 1.00 atmosphere and the balloon was squeezed to half of its initial volume (V2 = 0.5V1), the new pressure (P2) would be 2.00 atmospheres, assuming the temperature remains steady and there are no leaks. This concept is a fundamental principle in the study of ideal gases.
A box is sliding up an incline that makes an angle of 14.0° with respect to the horizontal. the coefficient of kinetic friction between the box and the surface of the incline is 0.180. the initial speed of the box at the bottom of the incline is 2.20 m/s. how far does the box travel along the incline before coming to rest?
The box travels a distance of approximately 3.51 meters along the incline before coming to rest.
An angle of 14.0° with respect to the horizontal is made when box slides up an incline. 0.180 is the coefficient of kinetic friction between the box and the surface of the incline. It is given that 2.20 m/s is the initial speed of the box at the bottom of the incline. The box travels a distance of approximately 3.51 meters along the incline before coming to rest.
To find this, we use the equations of motion, taking into account the forces acting on the box, including gravity, normal force, friction force, and the component of gravity parallel to the incline. By applying these equations and considering the work done by friction, we can determine the distance traveled by the box.
3 forces that you exert when riding a bike
A heavy crate applies of 1500 N on a 25-m^2 piston . The smaller piston is 1/30 the size of the larger one . what force is needed to lif the crate
Answer:
The force needed to lift the crate is 50 N
Explanation:
[tex]P_{1} = \frac{F_{1}}{A_{1}} = \frac{1500N}{25 m^{2} } \\P_{1}= P_{2} \\P_{2} = \frac{F_{2}}{A_{2}}\\A_{2} = 25*\frac{1}{30} \\\frac{1500N}{25 m^{2} } =\frac{F_{2} }{\frac{25}{30}m^{2} }\\ F_{2}* 25 m^{2} = 1500 N *\frac{25}{30}m^{2}\\ F_{2}= \frac{1250 N*m^{2}}{25 m^{2}}\\ F_{2}= 50 N[/tex]
Final answer:
To calculate the force needed to lift the crate, we can use Pascal's principle. The force needed to lift the crate is 50 N.
Explanation:
To calculate the force needed to lift the crate, we can use Pascal's principle. According to Pascal's principle, the pressure exerted on a fluid in a closed container is transmitted equally in all directions. In this case, the force applied by the heavy crate on the larger piston is 1500 N, and the smaller piston is 1/30 the size of the larger one. Therefore, the force needed to lift the crate can be calculated using the equation:
(Force on larger piston) / (Area of larger piston) = (Force needed to lift crate) / (Area of smaller piston)
Let's substitute the given values into the equation:
(1500 N) / (25 m^2) = (Force needed to lift crate) / (1/30 * 25 m^2)
Simplifying the equation, we find that the force needed to lift the crate is 50 N.
Before 1960, people believed that the maximum attainable coefficient of static friction for an automobile tire on a roadway was μs = 1. around 1962, three companies independently developed racing tires with coefficients of 1.6. this problem shows that tires have improved further since then. the shortest time interval in which a piston-engine car initially at rest has covered a distance of one-quarter mile is about 4.43 s. ]
Final answer:
The question asks for calculations involving the physics of car motion, specifically considering the static friction between tires and various road surfaces to find maximum deceleration and acceleration without slipping.
Explanation:
The student's question involves calculating the maximum deceleration and acceleration of a car under various road conditions, which requires an understanding of physics concepts such as centripetal force, coefficient of static friction, and normal force. These calculations are based on the equations of motion and the relationship between frictional force and the normal force, taking into account the angle of incline or decline of the road surface.
The coefficient of static friction is crucial in determining the car's ability to accelerate or decelerate without slipping. For example, the friction on dry concrete will differ from that on wet concrete or ice. The provided coefficients of static friction are used to determine the maximum safe speeds or accelerations to avoid tire slippage.
Imagine that you pushed a box, applying a force of 60 newtons, over a distance of 4 meters. how much would you have done? 15 joules 56 joules 64 joules 240 joules
work=force X distance
Newtons is a measurement of force
4 meters is your distance 60×4=240
240 joules
A 5.00X10^5 kg rocket is accelerating straight up. Its engines produce 1.250X10^7 N of thrust, and air resistance is 4.50X10^6 N. What is the rockets acceleration?
To determine the rocket's acceleration, subtract the air resistance from the thrust and divide by the mass of the rocket.
Explanation:To determine the rocket's acceleration, we need to calculate the net force acting on the rocket by subtracting the air resistance from the thrust.
The net force is equal to the mass of the rocket multiplied by its acceleration. Rearranging the equation, we can solve for acceleration: acceleration = (net force) / (mass). In this case, the net force is given as the thrust minus the air resistance, so the acceleration would be (1.250X10^7 N - 4.50X10^6 N) / (5.00X10^5 kg).
Simplifying the expression, the acceleration is approximately 17.6 m/s².
Learn more about rocket acceleration here:https://brainly.com/question/39037920
#SPJ12
In a chemical reaction, water decomposes to form hydrogen and oxygen.
Which term names the water?
A.an element
B.an atom
C.a product
D.a reactant
Answer:
D. A reactant
Explanation:
How long until the sun runs out of hydrigen?
The box is at rest on the table. Which force is represented by vector A?
A. sliding friction
B. rolling friction
C. static friction
D. fluid friction
the answer c!!!!!!!!!!
An object travels 8 meters in the first second of travel, 8 meters again during the second second of travel, and 8 meters again during the third second. Its acceleration is
A.0 m/s^2
B.8 m/s^2
C.16 m/s^2
D.32 m/s^2
An object travels 8 meters in the first second of travel, 8 meters again during the second of travel, and 8 meters again during the third second. Its acceleration would be 0 m / s² , therefore the correct answer is option A.
What is acceleration?The rate of change of the velocity with respect to time is known as the acceleration of the object. Generally, the unit of acceleration is considered as meter/seconds².
As given in the problem if an object travels 8 meters in the first second of travel, 8 meters again during the second of travel, and 8 meters again during the third second, then we have to find its acceleration ,
As the object is covering an equal distance in an equal interval of time its acceleration would be zero.
Thus , the correct answer is option A.
To learn more about acceleration from here,refer to the link given below,
brainly.com/question/2303856
#SPJ2
If asked to describe a wave, you could say waves are the (10 points)
A. movement of particles within a medium.
B.disturbance of energy in a material.
C.repetitive transfer of particles from one medium to another.
D. continuous transmission of energy from one location to the next.
A glacier moves with a speed of 35 nm/s. How many years would it take for the glacier to move 0.9 km? Assume there are 365 days in a year. Answer in units of y.
When drawing the best line of fit on a graph for physics, do I draw the line starting from the x-axis?
Answer:
It would be best to start as close to the first point of your line on the Y-axis.
(Sorry if that doesn't make much sense, I tried to word it as best as I could. Basically, just start your line on the Y-axis closest to your starting point of the line.)
Explanation:
Water has a density that is 13.6 times less than that of mercury. how high would a column of water need to be to measure a pressure of 1 atm?
Final answer:
A column of mercury would need to be 73.5 cm high to measure a pressure of 1 atm.
Explanation:
The question asks for the height of a column of water needed to measure a pressure of 1 atm. We can use the information given to compare the density of water and mercury. Since water has a density that is 13.6 times less than that of mercury, a column of mercury only needs to be 13.6 times shorter than a column of water to measure the same pressure. It is stated that a column of water over 10 meters high can measure atmospheric pressure, so a column of mercury would only need to be 10 meters / 13.6 = 0.735 meters (or 73.5 cm) high to measure the same pressure.
What if m1 is initially moving at 3.4 m/s while m2 is initially at rest? (a) find the maximum spring compression in this case?
In establishing standing waves with a Slinky®, your wrist oscillates with f frequency of 8.0 Hz, and the velocity of the wave is 40 m/s. What is the wavelength of this wave?
Answer:
the answer is 5.0
Explanation:
What energy source would be abundant in california due to its position on a plate boundary?
The energy source which is most abundant in california due to its position in plate boundary is geothermal energy.
What is geothermal energy?Geothermal energy is the thermal energy found in the Earth's crust that has been produced during the planet's formation and by the radioactive decay of minerals in an amount that is currently unknown but may be nearly equal.
Some rocks melt under the intense pressure and heat of the Earth's interior, while the solid mantle exhibits plastic behavior. As a result, since the mantle is lighter than the surrounding rock, some of it convicts upward.
Since the Paleolithic era, geothermal heating has been utilized for space heating and for bathing, respectively, utilizing water from hot springs.
Geothermal power, the phrase used to describe the production of electricity from geothermal energy, has become more significant in recent years.
To find more on plate boundaries, refer here:
https://brainly.com/question/18256552
#SPJ5
You raise a bucket of water from the bottom of a deep well. if your power output is 100 w, and the mass of the bucket and the water in it is 3.50 kg, with what speed can you raise the bucket? ignore the weight of the rope.
The approximate speed at which the bucket can be raised is 2.91 m/s.
To calculate the speed at which you can raise the bucket, we need to use the equation for power:
Power = Force x Velocity
In this case, the power output is 100 W and the mass of the bucket and water is 3.50 kg. Since the weight of the rope is ignored, we only consider the force required to lift the bucket. The force can be calculated using the equation:
Force = mass x acceleration due to gravitySubstituting the values, we have:
Force = 3.50 kg x 9.8 m/s^2 = 34.3 NNow, we can rearrange the equation for power to solve for velocity:
Velocity = Power / ForceSubstituting the values, we have:
Velocity = 100 W / 34.3 N = 2.91 m/sTherefore, you can raise the bucket at a speed of approximately 2.91 m/s.
A lens for a spotlight is coated so that it does not transmit yellow light. if the light sources is white, what color is the spotlight
The color of the spotlight will be blue since yellow will not be transmitted.
What is the color is transmitted when yellow is removed from white light?White light is composed of the colors seven close of light.
The seven colors rest of the seven colors can be produced from a combination of the colors red, blue and green light.
Yellow color is made from red and green color.
Since yellow will not be transmitted, the color of the spotlight will be blue.
Learn more about colors at: https://brainly.com/question/10064126
can you go 500 km in 8 hours without driving faster than 55 mph?
The wavelength of some green light is 530.0 nm. what is the frequency of this green light?
Answer:
The answer to this question is 5.66 x (10^14) Hz
Explanation: Recall that the frequency of a light wave is the speed of light divided by the wavelength in meters.
You are given the wavelength of the light in nanometers, but the denominator of the formula is in meters. In this case, multiply 530.0 nm by 10^-9 m, resulting 5.3 * (10^-7) m.
After the conversion, divide the speed of light which is 3.0 x (10^8) m/s by the wavelength in meters. The final answer should be 5.66 x (10^14) Hz.
**Depending on the usage of significant figures, you may have to round to the nearest specified decimal value or truncate it at the nearest specified place value.**
The ideal mechanical advantage of an inclined plane is 3.5, and its efficiency is 0.6. What is the mechanical advantage of the inclined plane?
The ideal mechanical advantage of an inclined plane is 3.5, and its efficiency is 0.6. The mechanical advantage of the inclined plane is 2.1.
What is efficiency?Efficiency may be represented as a ratio: output input. The total amount of beneficial work accomplished, excluding waste and spoilage, is known as output or work output. Efficiency can also be expressed as a percentage by dividing the ratio by 100.
The force amplified by utilizing a tool, mechanical device, or machine system is known as mechanical advantage. To achieve the necessary output force amplification, the gadget trades off input forces against movement. The law of the lever serves as a paradigm for this.
Mechanical advantage = ideal mechanical advantage x efficiency = 3.5 * 0.6= 2.1.
The mechanical advantage of the inclined plane is 2.1.
To learn more about efficiency refer to the link:
brainly.com/question/14502027
#SPJ2
How is position time and motion related
A force of 20 N acts on a rocket for 350 s, causing the rocket's velocity to increase. Calculate the impulse of the force and by how much does the rocket's momentum increase?
A force of 20 N acts on a rocket for 350 s, causing the rocket's velocity to increase, the impulse of the force, the rocket's momentum increase 7000 N-s.
What is force?A force in physics is an effect that has the power to alter an object's motion. An object with mass can change its velocity, or accelerate, as a result of a force. An obvious way to describe force is as a push or a pull.
A force is a vector quantity since it has both magnitude and direction.
The formula for impulse is force times time, so impulse would be 20N x 350s = 7000 N x s. Since this impulse of 7000 N x s, the momentum would also be the same since the velocity increased after this impulse.
A force of 20 N acts on a rocket for 350 s, causing the rocket's velocity to increase, the impulse of the force, the rocket's momentum increase 7000 N-s.
To learn more about force refer to the link:
brainly.com/question/13191643
#SPJ5
plsss help
A force of 50 N is used to move a footstool 3 M. How much work is done?
A- 122J
B-53J
C- 16.7J
D- 150J
A force of 50 N is used to move a footstool 3 M. amount of work done is 150 joules.
What is work?Work in physics is the energy that is transferred to or from an item when a force is applied along a displacement. In its simplest form, it equals the product of the force's magnitude and the distance traveled for a constant force directed in the direction of motion.
Given in the question a force of 50 N is used to move a footstool 3 M then,
Work = force x distance. In units, Joules = Newtons x meters.
So: Work = 50 Newtons x 3 meters
Work = 150 joules.
you should learn to identify these values using their fundamental units:
Force = Newtons = Kg·m/s²
Work = joules = kg·m²/s²
Power = watts = kg·m²/s³
A force of 50 N is used to move a footstool 3 M. amount of work done is 150 joules.
To learn more about work refer to the link:
brainly.com/question/18094932
#SPJ5
la fuente de energia que se encuentra en la materia organica, de origen vegetal o animal y en los materiales obtenidos a partir de su transformacion recibe el nombre de:
a. Biomasa
b. Geotermica
c. Mareomotriz
d.Solar