The ionic compound formed from Fe3+ and Cl- is FeCl3, called iron(III) chloride. For dissociation in water, FeCl2 separates into Fe2+ and Cl-. The complete ionic equation for the reaction between FeCl2 and AgNO3 includes all ions present with AgCl precipitating out, and the net ionic equation shows just the ions involved in the formation of the precipitate.
Naming the Ionic Compound Formed from Fe3+ and Each Anion
To name the ionic compound formed from Fe3+ and an anion, you follow a set of rules. Firstly, you write the name of the cation including the charge in roman numerals enclosed in small brackets, followed by the name of the anion. For Fe3+, we use the name Iron(III), and for a chloride ion (Cl-), the name is chloride. The compound's formula is FeCl3, which is called iron(III) chloride. Remember that the subscript in the chemical formula indicates the number of anions needed to balance the charge of the cation.
Compound Dissociation in Water
To write a balanced equation for how an ionic compound like FeCl2 dissociates in water, you would represent it as follows:
FeCl2(s) -> Fe2+(aq) + 2 Cl-(aq)
This shows the separation of the ionic compound into its individual ions when dissolved in water.
Complete Ionic Equation for FeCl2 and AgNO3
The complete ionic equation for the reaction between FeCl2(aq) and AgNO3(aq), consulting solubility rules, would look like this:
Fe2+(aq) + 2 Cl-(aq) + 2 Ag+(aq) + 2 NO3-(aq) -> 2 AgCl(s) + Fe2+(aq) + 2 NO3-(aq)
Net Ionic Equation for FeCl2 and AgNO3
The net ionic equation, after removing the spectator ions, for the same reaction would be:
2 Cl-(aq) + 2 Ag+(aq) -> 2 AgCl(s)
Which of the following is the correct formula for barium (II) sulfate?
what location on earth experiences the least change in the number of daylight hours throughout the year?
Give the structure corresponding to the name (s)−3−iodo−2−methylnonane.
The (s)−3−iodo−2−methylnonane belongs to organic compounds and consists of a nonane with an iodine atom attached to the third carbon and a methyl group attached to the second carbon.
Explanation:The structure corresponding to the name (s)−3−iodo−2−methylnonane is achieved by following the nomenclature system for organic compounds. Nonane is a carbon backbone with nine carbon atoms. The '2-methyl' indicates that there is a methyl, or CH3 group, attached to the second carbon from the end. The '3-iodo' indicates that there is an iodine atom attached to the third carbon from the end. Therefore, starting from one end of the nonane, we have CH3-CH2-CH(I)-CH(CH3)-CH2-CH2-CH2-CH2-CH3.
Learn more about Organic Compound Structure here:https://brainly.com/question/35316125
#SPJ3
Determine the density of a 23.4g block that when placed in 25.00mL of water causes the water to rise to a level of 28.70mL?
Volatile liquids with lower boiling points often give better results than those with higher boiling points. suggest a reason for this.
At which stage does a gas form in a gas formation reaction?
the reactants stage
the product stage
the liquid stage
the solid stage
Answer: b
Explanation:
what is the definition of tributary
A tributary is a smaller stream or river that flows into a larger one, contributing to its volume and influencing its navigability, ecosystem, and flooding potential.
Explanation:The definition of a tributary is a stream or river that flows into a larger stream, river, or lake. These smaller watercourses contribute to the flow of the larger one, which is often referred to as the mainstem or parent river. Tributaries do not flow directly into the sea. They provide additional water volume to their parent river, which can then affect the river's ability to navigate, its ecosystem, and potential for flooding. For example, the Missouri River is a tributary of the Mississippi River because it flows into it.
A sample of a pure compound containing C, H, and N, weighing 1.00 g, yields 2.84 g of carbon dioxide and 0.677 g of water when it reacts with excess oxygen. What is the simplest formula of the compound?
A child goes to the kitchen sink to rinse the glass from which he just drank grape juice. as the water runs into the glass, the juice residue turns from ppurple to light blue what is happening
which state of matter undergoes changes in volume most easily?
Gas is the state of matter that can most easily undergo changes in volume. The freely moving particles of gas adapt to take up the entire volume and shape of any container it is kept in.
Explanation:The state of matter that undergoes changes in volume most easily is gas. This is because gaseous substances have the most dispersed particles among the three fundamental states of matter (solids, liquids, and gases). These particles move freely, occupying the complete shape and volume of the container in which they are kept. Thus, any change in the container's size will in-turn affect the volume of the gas. For instance, if we inflate a balloon with gas and then deflate it, the gas volume adjusts in line with the balloon's volume changes.
Learn more about State of Matter
https://brainly.com/question/31659891
#SPJ6
4.05 kg + 567.95 g + 100.1 g add the correct value using the correct sig figs and or least precise degree of precision. When i did least degree of precision i got 4718.1g, do we need to convert the kg unit to grams before getting the least degree of precision? since i used 100.1 as dop and if i had converted first the dop of 4.05 or now 4050g the dop is now only to the tens place compared to being in the tenths place
To find the least degree of precision we swould model it after the kg amount or 4.05 kg or two decimal places. So that would add 0.56795 kg (0.57 kg) and then 0.1001 kg (0.1 kg) so that our answer would be 4.72 kg.
In the other hand, the greatest degree of precision would be to conver 4.05 kg to 4050 g so that 4050g + 567.95 + 100.1 g= 4718.05 grams or 4718 g.
How many grams of CO2 are used when 7.0 g of O2 are produced?
The question cannot be answered as posed because a specific chemical reaction and balanced equation are needed to relate the masses of O2 and CO2.
Explanation:To answer how many grams of CO2 are used when 7.0 g of O2 are produced, we assume the process is a typical combustion or respiration reaction, where CO2 is generated from O2, or vice versa. The balanced chemical equation for the combustion of carbon would typically be C + O2 → CO2. However, since we are given the mass of O2 produced, and not the mass of a carbon-containing fuel that reacts, we cannot proceed to calculate the mass of CO2 without additional information on the specific reaction involved, including the stoichiometry that defines the mass relationship between O2 and CO2. Therefore, we must have a balanced equation or a known reaction to relate the masses of O2 and CO2 produced in order to provide a specific answer.
Learn more about Chemical Reaction Stoichiometry here:https://brainly.com/question/30415532
#SPJ12
9.62 grams of [tex]\( \text{CO}_2 \)[/tex] are used when 7.0 grams of [tex]\( \text{O}_2 \)[/tex] are produced.
One common reaction where [tex]\( \text{O}_2 \)[/tex] is produced and [tex]\( \text{CO}_2 \)[/tex] is consumed is photosynthesis:
[tex]\[ 6 \text{CO}_2 + 6 \text{H}_2\text{O} \rightarrow \text{C}_6\text{H}_{12}\text{O}_6 + 6 \text{O}_2 \][/tex]
From this balanced equation, we see that 6 moles of [tex]\( \text{CO}_2 \)[/tex] produce 6 moles of [tex]\( \text{O}_2 \)[/tex]. This means that 1 mole of [tex]\( \text{CO}_2 \)[/tex] produces 1 mole of[tex]\( \text{O}_2 \).[/tex]
Step-by-Step Solution:
1. Determine the molar mass of [tex]\( \text{O}_2 \)[/tex]:
[tex]\[ \text{Molar mass of O}_2 = 2 \times 16.00 \text{ g/mol} = 32.00 \text{ g/mol} \][/tex]
2. Calculate the moles of \( \text{O}_2 \) produced:
[tex]\[ \text{Moles of O}_2 = \frac{7.0 \text{ g}}{32.00 \text{ g/mol}} = 0.21875 \text{ moles} \][/tex]
3. Use the stoichiometry from the balanced equation:
From the balanced equation, the mole ratio between[tex]\( \text{CO}_2 \) and \( \text{O}_2 \) is 1:1.[/tex]
Therefore, the moles of [tex]\( \text{CO}_2 \)[/tex] used is the same as the moles of [tex]\( \text{O}_2 \)[/tex]produced:
[tex]\[ \text{Moles of CO}_2 = 0.21875 \text{ moles} \][/tex]
4. Determine the molar mass of [tex]\( \text{CO}_2 \)[/tex] :
[tex]\[ \text{Molar mass of CO}_2 = 12.01 \text{ g/mol} + 2 \times 16.00 \text{ g/mol} = 44.01 \text{ g/mol} \][/tex]
5. Calculate the grams of \( \text{CO}_2 \) used:
[tex]\[ \text{Grams of CO}_2 = \text{Moles of CO}_2 \times \text{Molar mass of CO}_2 \][/tex]
[tex]\[ \text{Grams of CO}_2 = 0.21875 \text{ moles} \times 44.01 \text{ g/mol} = 9.62 \text{ g} \][/tex]
If 50% of radioactive element remains after 4000 years what what is the half life
If acetic acid is the only acid that vinegar contains (ka=1.8×10−5), calculate the concentration of acetic acid in the vinegar. express your answer using two significant figures.
The oceanic crust is made primarily from this type of rock.
Answer:
Igneous rock basalt.
Explanation:
The ocean crust is made mostly of igneous rock basalt, which comes from lava and the movement of tectonic plates.
There are three common functional groups in organic chemistry that are readily ionized by adjusting the ph of the aqueous solution during an extraction. name and write the chemical structure of these three functional groups and show each
If a feather and an iron bar is released from a same height in a room without any air resistance, which one(s) will impact the ground first.
A) neither one, because without air resistance gravity is absent
B) iron bar
C) both
D) feather
Both a feather and an iron bar will impact the ground at the same time if released from the same height in a room without air resistance, demonstrating that gravity causes all objects to fall with the same acceleration, disregarding their mass.
Explanation:If a feather and an iron bar are released from the same height in a room without any air resistance, both the feather and the iron bar will impact the ground at the same time. The correct answer is C) both. This outcome occurs because in the absence of air resistance, all objects fall at the same rate due to gravity. This phenomenon was famously demonstrated on the Moon by astronaut David R. Scott in 1971, where, despite the Moon's lower gravitational acceleration of 1.67 m/s² compared to Earth's 9.81 m/s², both a hammer and a feather were shown to fall at the same rate when dropped from the same height. This validates that acceleration due to gravity is constant and does not depend on the mass of the objects involved.
Learn more about Free-fall in a vacuum here:https://brainly.com/question/28228808
#SPJ3
One radioactive isotope of calcium has an atomic mass number of 47. How many neutrons are in the calcium-47 nucleus?
Answer: The number of neutrons in the given isotope are 27.
Explanation:
Atomic number is defined as the number of electrons or number of protons that are present in a neutral atom. It is represented as Z.
Z = Atomic number = Number of electrons = Number of protons
Mass number is defined as the sum of number of protons and number of neutrons present in an atom. It is represented as A.
A = Mass number = Number of protons + Number of neutrons
Number of neutrons = Mass number - Atomic number
We are given an isotope having representation: [tex]_{20}^{47}\textrm{Ca}[/tex]
Atomic number or number of protons = 20
Mass number = 47
So, number of neutrons = 47 - 20 = 27
Hence, the number of neutrons in the given isotope are 27.
Which of these statements about enzymes is true?
a.) enzymes increase the rate of a reaction by decreasing the gibbs free energy change of the reaction.
b.) enzymes decrease the rate of a reaction by increasing the gibbs free energy change of the reaction.
c.) enzymes increase the rate of a reaction by decreasing the activation energy of the reaction.
d.) enzymes increase the rate of a reaction by decreasing the activation energy of the reaction and the gibbs free energy change of the reaction.
e.) enzymes do not change the rate of a reaction?
Enzymes increase the rate of a reaction by decreasing the activation energy required for the reaction but do not change the Gibbs free energy change of the reaction. Option C is correct.
Among the statements about enzymes, the true one is that enzymes increase the rate of a reaction by decreasing the activation energy of the reaction. Enzymes are biological catalysts that specifically bind to substrates and help convert them to products more efficiently by lowering the energetic barrier, which is the activation energy required for the reaction to proceed.
However, it is important to note that while enzymes do lower the activation energy, they do not alter the Gibbs free energy change (AG) of the reaction. The Gibbs free energy change is a thermodynamic property that determines the spontaneity of a reaction and remains unchanged regardless of whether enzymes are present.
Hence, C. is the correct option.
The ester below can be separated into phenol and an acetate salt, via saponification: heating the ester with a strong base, such as sodium hydroxide, will produce phenol and sodium acetate. the two chemicals can then be separated by heat and filtration.
a. calculate the unsaturation number of the ester above.
b. calculate the molecular weight of the ester above
Why does ferrocene undergo the acylation reaction more readily than benzene?
A chemist dissolves of pure barium hydroxide in enough water to make up of solution. calculate the ph of the solution. (the temperature of the solution is .) be sure your answer has the correct number of significant digits.
The pH of a 4.5 × 10^-4 M Ba(OH)2 solution is calculated by first determining the hydroxide ion concentration, which is doubled due to the two hydroxide ions provided by Ba(OH)2, and then calculating the pOH followed by subtracting from 14 to get the pH value of approximately 10.95.
Explanation:Calculating the pH of Barium Hydroxide Solution
For the calculation of the pH of a 4.5 × 10-4 M barium hydroxide (Ba(OH)2) solution, it is crucial to consider that barium hydroxide is a strong base which dissociates fully in water. As Ba(OH)2 provides two moles of hydroxide ions for each mole of the substance dissolved, the hydroxide ion concentration will be twice the concentration of Ba(OH)2, which is 9 × 10-4 M (2 × 4.5 × 10-4 M).
To find the pOH of the solution, we take the negative logarithm of the hydroxide ion concentration: pOH = -log (9 × 10-4) = 3.045757491. To find the pH, subtract the pOH from 14: pH = 14 - 3.045757491, which simplifies to approximately pH = 10.95. This is a basic solution, as expected from barium hydroxide.
In laboratory settings, remember to use proper safety precautions, the correct form of chemicals, accurate measuring tools, and the appropriate methods to adjust the pH of solutions, such as adding acid or base. Moreover, for precise results, correctly label solutions and calibrate equipment such as pH meters as necessary.
How many dots would a lewis dot structure for neon have?
moles of hydrogen in 9.15×10−2 mol C4H10
How many liters of water are required to dissolve 1.00 g of barium sulfate?
To dissolve 1.00 g of barium sulfate, we would need 1 L of water.
Explanation:In order to calculate the amount of water needed to dissolve 1.00 g of barium sulfate, we need to use the molar mass of barium sulfate and the concept of molarity.
The molar mass of barium sulfate (BaSO4) is 233.43 g/mol. We can use this to convert the mass of barium sulfate to moles.
Once we know the number of moles of barium sulfate, we can use the molar ratio between barium sulfate and water to calculate the volume of water needed. The balanced equation for the dissolution of barium sulfate in water is:
BaSO4 (s) + H2O (l) → Ba2+ (aq) + SO42- (aq)
Based on this equation, 1 mole of barium sulfate dissolves to give 1 mole of water. Therefore, to dissolve 1.00 g of barium sulfate, we would need 1 L of water.
Learn more about dissolving barium sulfate in water here:https://brainly.com/question/5383482
#SPJ12
How many hydrogen atoms are in 2.80 mol of ammonium sulfide?
Answer : The number of hydrogen atoms are, [tex]134.89\times 10^{23}[/tex]
Explanation : Given,
Moles of hydrogen atoms = 2.80 mole
As we know that, the formula of ammonium sulfide is, [tex](NH_4)_2S[/tex]. In ammonium sulfide, there are 2 atoms of nitrogen, 8 atoms of hydrogen and 1 atom of sulfur.
Now we have to calculate the number of hydrogen atoms.
As, 1 mole of [tex](NH_4)_2S[/tex] contains [tex]8\times 6.022\times 10^{23}[/tex] number of hydrogen atoms.
So, 2.80 mole of [tex](NH_4)_2S[/tex] contains [tex]2.80\times 8\times \times 6.022\times 10^{23}=134.89\times 10^{23}[/tex] number of hydrogen atoms.
Therefore, the number of hydrogen atoms are, [tex]134.89\times 10^{23}[/tex]
What role does the oxidation agent play in a redox reaction
Suggest a reason for why the phosphorus-containing side product from the horner-emmons wittig reaction is more water-soluble than the triphenylphosphine oxide side product obtained from the standard wittig reaction.
What is the angle between the carbon-sulfur bond and the carbon-nitrogen bond in the thiocyanate ( SCN− ) ion?
Answer:
Angle between the carbon-sulfur bond and the carbon-nitrogen bond in the thiocyanate ion[tex]SCN^-[/tex] is 180°.
Explanation:
The hybridization of carbon atom is sp hybridized. The shape of the sp hybridized carbon is linear which means that angle between sulfur carbon a bond and carbon nitrogen bond is 180 °.
Where as [tex]sp^3[/tex] hybridized carbon has tetrahedral shape with an angle of 109.5°.
Where as [tex]sp^2[/tex] hybridized carbon has trigonal planar with an angle of 120°.
A gas mixture is made by combining 8.2 g each of ar, ne, and an unknown diatomic gas. at stp, the mixture occupies a volume of 19.44 l.what is the molar mass of the unknown gas