As a wave travels through a medium, it displaces particles in a direction parallel to the motion of the wave. We can conclude this is a

Answers

Answer 1
we can conclude that it is a longitudinal wave because the wave is traveling through a medium displacing particles
Answer 2

Answer:longitudinal wave

Explanation:. A longitudinal wave is a wave in which particles of the medium move in a direction parallel to the direction that the wave moves.


Related Questions

how to convert 550 centimeters into meters?

Answers

1m=100cm                                                                                                              100cm=1m                                                                                                             550cm=550/100=5.5m

Cole and Blayne were attempting to push Hailey on a wheeled chair with enough force so Hailey would run into Mr Young. They figured out they needed a 50 N force to run the chair into Mr Young. Cole and Blayne were both applying force toward Mr Young. Cole was applying force a 20 N force to the left, and Blayne was applying (with all of his strength) a force of 15 N to the left.

What was the net force if we ignore friction?

Answers

15 N. (i hope this is right)

the net force on the propeller of a 3.2 kg model is 7.0 N forward. what is the acceleration of the plane

Answers

the acceleration is 2.19m/s^2

Answer:

Acceleration of the plane, [tex]a=2.18\ m/s^2[/tex]

Explanation:

It is given that,

Mass of the model, m = 3.2 kg

The net force acting on the propeller, F = 7 N

We need to find the acceleration of the plane. Let it is given by a. Using second law of motion, we can find the value of a. The mathematical relationship between the mass, force and the acceleration is given by :

[tex]F=m\times a[/tex]

[tex]a=\dfrac{F}{m}[/tex]

[tex]a=\dfrac{7\ N}{3.2\ kg}[/tex]

[tex]a=2.18\ m/s^2[/tex]

So, the acceleration of the plane is [tex]2.18\ m/s^2[/tex]. Hence, this is the required solution.

What Is the mass of 7.50 mol of uranium

Answers

Moles x Mol mass = mass. 
Having looked it up, the mol.mass of U-238 is 238.03g/mol. 
7.50 moles x 238.03g/mol. = 1,785.23g/mol

Final answer:

The mass of 7.50 moles of uranium is 1785.375 g, calculated by multiplying the molar mass of uranium (238.05 g/mol) by the number of moles (7.50).

Explanation:

The question seeks to find the mass of 7.50 moles of uranium. Considering the molar mass of uranium, specifically isotope U-238 which is commonly referred to in problems regarding uranium mass calculations, is 238.05 g/mol. To find the total mass of 7.50 moles of uranium, we use the formula:

Mass = molar mass × number of moles

Thus, the mass of 7.50 mol of uranium is:

238.05 g/mol × 7.50 mol = 1785.375 g

This calculation plainly demonstrates how the molar mass of a substance can be utilized to find the mass of a given number of moles of that substance, an essential concept in chemistry, especially in the field of nuclear chemistry where isotopes such as uranium are frequently discussed.

What is the amount of "stuff in an object?

Answers

Good question. The amount of 'stuff' in an object is it's mass

A fundamental distinction we learn in physics is the difference between mass and weight. If we were in deep space, away from any very large objects of mass (like a planet), we would be 'weightless' e.g. not feel the effects of gravity, but we would not be 'massless'. Our mass doesn't change based upon our proximity to large objects (gravitational attraction), but the sense of weight does.

mass is  the amount of "stuff in an object

PLEASE HELP!!

What can affect the properties of a substance?

A. only the types of atoms
B. only the arrangement of atoms
C. the arrangement and types of atoms
D. neither the arrangement nor the types of atoms

Answers

the answer is c if i have not mistaken

The answer is C. The arrangment and types of atoms.

What type of electromagnetic wave can be used to transmit information?
(A)radio wave only
(B)microwave only
(C)neither a radio wave nor a microwave
(D)both a radio wave and a microwave

Answers

Radio wave only would be the answer.

Both radio waves and microwaves can be used to transmit information, employing their electric and magnetic fields to carry signals for various communication technologies.

The type of electromagnetic wave that can be used to transmit information includes both radio waves and microwaves. These are just two categories within the electromagnetic spectrum which is employed for data transmission. Electromagnetic waves consist of both an electric field and a magnetic field that travel perpendicular to each other and are used in various technologies such as AM and FM radio, cell phones, and microwave ovens. Radio waves have longer wavelengths and are widely used for communications such as audio signals for radios, while microwaves have shorter wavelengths and are often used for high-speed data transmission like in WiFi networks.

A truck driver travels 55 km in 1 hour he then drives a speed of 35 km/h for two hours next he drives 175 km in three hours. what was his average speed?

Answers

first hour = 55 per hour.
= 55

second and third = 35 per hour.
= 70

fourth, fifth and sixth = 175 per hour.
= 525

average speed = (55 + 70 + 525) / 6
= 650 / 6
= 108.33 km per hour

The average speed of a truck driver is 50 km/hr.

Given:

A truck driver travels 55 km in 1 hour he then drives at a speed of 35 km/h for two hours next he drives 175 km in three hours

To find:

The average speed of a truck driver.

Solution:

Distance traveled by a truck driver in 1 hour = 55 km

Speed of a truck driver after in next 2 hours =35 km/hr

Distance traveled by a truck driver in these 2 hours = [tex]35 km/hr \times 2= 70 km[/tex]

Distance traveled by a truck driver in last 3 hours = 175 km

Total distance traveled by truck driver :

[tex]= 55 km + 70 km + 175 km = 300 km[/tex]

Total time taken by the truck:

[tex]=1 hr + 2 hr + 3 hr = 6 hr[/tex]

The average speed of the truck driver:

[tex]=\frac{\text{Total distace covered}}{\text{Total time taken}}\\\\=\frac{300 km}{6 hr}=50 km/hr[/tex]

The average speed of a truck driver is 50 km/hr.

Learn more about average speed here:

brainly.com/question/8819317?referrer=searchResults

A kilograms weighs more than two of these. *The answer is a 6-letter word that has an "o" as the letter, aka -o----*

Answers

A kilogram of mass weighs more than two POUNDS on the Earth, but not necessarily in other places. For example, it only weighs about 0.36 of one pound on the moon.

Final answer:

The word fitting the description "a kilogram weighs more than two of these" with 'o' as the second letter is 'pound.' Understanding and converting between pounds and kilograms is essential for solving multi-step weight-related problems in mathematics and science.

Explanation:

The question asks, “A kilogram weighs more than two of these.” The answer is a 6-letter word with “o” as the second letter, which is “pound.” One kilogram is approximately equal to 2.20462 pounds, making a single kilogram heavier than two pounds. In the metric system, weights are often calculated in grams and kilograms, and comparing these units requires understanding of conversion factors. For example, solving multi-step word problems involving weights in grams or kilograms often necessitates the use of the four basic operations: addition, subtraction, multiplication, and division.

This understanding helps in various scenarios, including when weighing objects or substances in science, such as comparing the weight of gases. For example, a liter of oxygen gas weighs more than a liter of water vapor; differential weights like these highlight the importance of understanding weight units and conversions in practical applications.

A honey bee flaps its wings 200 times per second. How much time is required for one wingbeat? Give your answer in milliseconds.

Answers

A bees wings move so rapidly that studying them, even seeing them, has proved difficult.
The honeybees have a rapid wing beat honeybee flaps its wings 230 times every second.

Therefore, a bee flaps its wings over 200 times in about 1ms

Answer:

The time is required for one wing beat is 5 millisecond.

Explanation:

Given that,

Frequency = 200 /sec

We need to calculate the time period

Using formula of time period

Time period is the reciprocal of the frequency.

[tex]T=\dfrac{1}{f}[/tex]

[tex]T=\dfrac{1}{200}[/tex]

[tex]T=0.005\ sec[/tex]

[tex]T= 5\ miliseconds[/tex]

Hence, The time is required for one wing beat is 5 millisecond.

Solve for x. 4(x+1)≤4x+3

Answers

4x + 4 < 4x + 3 (expand it)
4 < 3 (cancel 4x on both sides)
Since 4 < 3 is not true there is no solution.

Answer: NO SOLUTION.

Answer:

There is no solution for x.

Step-by-step explanation:

Consider the provided inequality.

[tex]4(x+1)\leq 4x+3[/tex]

Distributive property:

[tex]a(b+c)=ab+ac[/tex]

Use the distributive property to simplify the above inequality.

[tex]4(x+1)\leq 4x+3[/tex]

[tex]4x+4\leq 4x+3[/tex]

Subtract 4x from both the sides.

[tex]-4x+4x+4\leq 4x-4x+3[/tex]

[tex]4\leq 3[/tex]

Which is false, as 3 is neither greater or equal to 4.

Hence, there is no solution for x.

A scientific model doesn't need to be something physical. It can also be mathematical

Answers

This is true, but it doesnt seem like a question. Elaborate?
It is true, but what is your question?

A student is trying to calculate the density of an ice cream cone. She already knows the mass, but she needs to determine the volume as well. Which of the following formulas can be used to calculate the volume of the cone?

Answers

v= 1/3 π r²h 
this is the formula for a cone hope this helps :) 

Answer:

[tex]V = \frac{1}{3}\pi R^2 H[/tex]

Explanation:

Volume of any type of cone is given as

[tex]V = \frac{1}{3}[/tex] (base area) (height)

Now we know that base of the triangular cone is always like a circle of radius R

Now the area of the base is given as

[tex]A = \pi R^2[/tex]

Now in order to find volume let say the height of the cone is H

so volume of the cone is given as

[tex]V = \frac{1}{3}\pi R^2 H[/tex]

after brainstorming engineers may refine their ideas by making what???

Answers

I would say they're gathering Data

I hope I helped :)

What is the acceleration of a vehicle that goes from 35m/s to a stop in 35 s?

Answers

the vehicle goes1,225 in 35 seconds

summary of newtons 2nd law 5 sentences

Answers


Newton's first law of motion predicts the action of objects for which all existing forces are balanced. The first law, also referred to as the law of inertia, states that if the forces acting upon an object are balanced, the acceleration of that object will be 0 m/s/s. Objects at equilibrium will not accelerate. According to the law, an object will only accelerate if there is an unbalanced force acting upon it. The presence of an unbalanced force will  change its speed, its direction, or both its speed and direction. All forces retaining to this law are related to inbalance

Friction is generated when _____ interact with each other on sliding surfaces.....  solids ,molecules, forces ,fluids

Answers

The answer is "Molecules"

Friction is generated when "Molecules"  interact with each other on sliding surfaces. 

Answer:

B) Molecules

Explanation:

What are the two factors that determine a material's density?

Answers

Mass and volume are the 2 factors to determine density

Which statement best describes resistance? Resistance is how well a current will flow in a material and is measured in volts. how well a material conducts an electrical charge and is measured in ohms. the ability of a material to attract a positive charge to create a current. the ability of a material to repel neutral charges and is measured in ohms. Can any one help?

Answers

A resistor's unit is in Ohms so we can scratch the other units that says otherwise (volts). Peep the word "resist" as in, it resists the current flow and changes the electrical energy to thermal energy (produces heat). It shows how well something can conduct current with its value of resistance. So Resistance is how well a material conducts an electrical charge and is measured in ohms. 

Answer:

How well a material conducts an electrical charge and is measured in ohms.

Explanation:

B

How does physics applied to being a teacher

Answers

Physics uses the language of mathematics to describe the physical world. Mathematics on it's own is just a language. It is a language that is build from logic :)

please rate as brianliest!! thanks!

how does the current model of the atom differ from
 j j thomas model

Answers

jj thomas' model contained electrons. 

The current model contains a nucleus with electrons orbiting around it. :)

solving equation for the quantity indicated

Answers

First, multiply each side by ' t '. Then, divide each side by ' a '.

I need help with this question ASAP!!!!

What is the difference between speed and velocity?
A) Velocity describes speed with direction.
B) There is no difference.
C) Velocity describes direction with position.
D) Velocity is used in space; speed is used on earth.

Answers

The answer is  A) Velocity describes speed with direction.

Speed can be in any direction 

What is the mass of an object if a net force of 8.0 N causes it to accelerate at 1.1 m/s2?

Answers

hope this helps m= 8/1.1 = 7.27 Kg.

psychoanalytic theory originated with

Answers

Sigmund Freud. He is also the father of psychoanalysis.
Final answer:

Psychoanalytic theory originated with Sigmund Freud and is a key concept in psychology.

Explanation:

The psychoanalytic theory originated with Sigmund Freud, an Austrian neurologist. Freud developed this theory in the late 19th and early 20th centuries and it became one of the most influential and widely known theories of psychology. According to psychoanalytic theory, behavior is driven by unconscious processes and childhood experiences play a significant role in shaping adult personality and behavior.

Learn more about Psychoanalytic theory here:

https://brainly.com/question/34708779

#SPJ6

Your science teacher gives you three liquids to pour into a jar. After pouring, the liquids layer as seen here. What property of matter prevents the three liquids from mixing together to form a solution?

Answers

a. mass
b. color
c. density
d. texture

i believe A

The property that prevents the liquids from mixing is density. Liquids have a set volume but don't have a fixed shape, allowing them to layer according to their density when combined in a container. The viscosity of the liquids can also affect their ability to mix.

The property of matter that prevents the three liquids from mixing together to form a solution is the density of each liquid. Matters most commonly exist as a solid, liquid, or gas; these are the three common phases of matter. Solids have a definite shape and volume, while liquids have a definite volume but not a definite shape, and take the shape of their container. Gases neither have a definite shape nor a definite volume. When liquids of different densities are combined, they layer according to their densities, with the least dense liquid at the top and the most dense at the bottom. This separation occurs because denser liquids are heavier per unit of volume and will not mix readily with lighter (less dense) liquids unless a force is applied to shake or stir them into a suspension or solution. It is also important to understand that the phases of matter and what constitutes a fluid, as liquids and gases, yield to shearing forces unlike solids. The capacity for a liquid to flow easily or quickly is determined by its viscosity. Because our three liquids have not mixed to form a homogeneous mixture, we can conclude that their different densities and potentially their varying viscosities have led to the layering effect observed.

ASAP HELP!!

If the mass of two objects is increased, what is the effect on the force between them?

The objects repel each other with less force.
The objects attract each other with less force.
The gravitational force between the objects decreases.
The gravitational force between the objects increases.

Answers

The force of gravity between two objects is increased when the mass of objects is increased.

Answer:

C- The gravitational force between the object decreases.

Explanation:

Explanation

close

Gravity is the force of attraction between all masses in the universe.

The magnitude of a gravitational force depends on

the masses of the objects

the distance between the objects

The gravitational force between two bodies decreases as their masses decrease.

What happens when aluminum fills its valence shell?

A. Three electrons are lost, creating Al ^ +3

B. Three electrons are gained, creating Al ^ -3

C. Three electrons are gained, creating Al ^ +3

D. Three electrons are lost, creating Al ^ -3

Answers

i beileve the answer is B

Answer:

Correct answer is B. Three electrons are gained, creating Al ^ -3

Explanation:

Aluminum in its valence shell has 3 electrons, this shell can have a maximun of 6 electrons. Then, to fill its valence shell, 3 electrons must be gained, and then the valence shell would have 6 electrons and would be complete.

If 3 electrons are gained, then Aluminum, would have a charge of -3, since each electron gained gives negative charge to the atom.

Al^ -3  is a ion of aluminum with charge -3.

What is an advantage of being a single-celled organism

Answers

multicellular organisms have a greater capacity for surviving under extreme environmental conditions
Final answer:

Being a single-celled organism offers the advantage of carrying out all necessary life processes independently, enabling efficient resource management, reproduction, and adaptation. It showcases biological organization within a single cell, allowing for versatility and adaptability in various environments.

Explanation:

One significant advantage of being a single-celled organism is the ability to carry out all of life's processes independently, without the need for cooperation or division of labor seen in multicellular organisms. This autonomy allows single-celled organisms to efficiently manage resources, reproduce, and adapt to their environment with a streamlined organizational structure. From the intake of nutrients to reproduction, these organisms perform essential life functions within a single cell, showcasing an impressive level of biological organization and flexibility. Single-celled organisms, such as bacteria and protists, exhibit specialized behaviors despite their simple structure, including directed motility and predation, which enable them to thrive in various environments. Additionally, the absence of specialized cells means that each cell must be proficient in multiple tasks, providing a versatile and adaptive approach to survival.

The Colonial Theory suggests that multicellularity arose from the cooperation among single cells, highlighting the evolutionary advantages of single-celled life forms in pioneering new ecological niches. This evolutionary step underpins the diversity of life we observe today, with multicellular organisms developing complex structures and functions from these humble beginnings. Despite their simplicity, single-celled organisms play a crucial role in the biosphere, serving as foundational elements of ecosystems and driving both ecological and evolutionary processes.

Which of the following states of matter has no definite shape but does have a fix volume

Answers

A Liquid changes it’s shape to fit in the container but keeps the same volume. the answer is liquid.

a solid

b liquid

c gas

d plasma

B: Liquid is the correct answer

Other Questions
A child dangles a 1.50-kilogram stuffed toy 0.500 meters from the ground. What is the potential energy of the toy?Answers are:0.188 J0.750 J7.35 J14.7 J The primary area of the cortex for visual processing is on the __________ lobe.a. temporalb. frontalc. occipitald. parietal What is the equilibrium price per DVD? What is Chestertons central idea in this essay, and how does he introduce it? When molecules are very large or are being moved against their concentration gradient, energy is required to move molecules across a cell membrane. this type of movement is best described as:? Solve the inequality. x - 5 -6A. x -1B. x -6/5C. x - 11D. x 11 what is the correct description of lactic acid fermentation? Employees of a newly opened restaurant have been complaining of frequent instances of slippage in the kitchen. What should the restaurant owner do to reduce these accidents?A. use good carpets on the kitchen floorB. give training to staff on causes of slippage C. use service mats on the kitchen floorD. buy disposable shoes for the staff which shows the set(s) the number 2.77 is an element of? Historia de tlaxcala prodigios que se vieron en mexico antes de la llegada do los espanoles Compared with our sun, first-generation stars tend to be __________ in mass and _________ What does the author say about how slaves found themselves aboard a slave ship Teens who use alcohol prior to sexual intercourse experience reduced self-awareness and are more likely to use condoms. reduced self-awareness and are less likely to use condoms. enhanced self-awareness and are more likely to use condoms. enhanced self-awareness and are less likely to use condoms. Compare the effects of disruptive, directional and stabilizing selection on the genetic makeup of a population answers Element that has two isotopes has an average atomic mass of 199.7. if 75.56% of the atoms of the element have an atomic mass of 197.4, what is the atomic mass of the other isotope? Three-fourths of the over 500,000 lakes in Europe are found in __________.A.Moldova, Georgia, Serbia, Bosnia, and HerzegovinaB.Germany, Hungary, Austria, and the Czech RepublicC.Norway, Sweden, Finland, and RussiaD.France, England, Spain, and Italy what is 320 million in scientific notation? Suppose we are comparing implementations of insertion sort and merge sort on the same machine. for inputs of size n, insertion sort runs in 82 steps, while merge sort runs in 64 log2 steps. for which values of ndoes insertion sort beat merge sort? The probability that a driver is speeding on a stretch of road is 0.27. what is the probability that a driver is not speeding? A car is traveling with constant velocity. this means that _______. Steam Workshop Downloader