This is often argued over, but most people agree it is somewhere within the 200s. So I think 250 is your best bet.
Yes I agree, the answer is C) 250 grams since the average human body contains around 200 grams.
Select all the species that are ions.
HCl
NaCl
NH4+
H2PO4-
CCl4
H3O+
Answer:
NH₄⁺
H₂PO₄⁻
H₃O⁺
Explanation:
An ion is an atom or molecule with a net electric charge due to the loss or gain of one or more electrons.Ion may be positively charged "cation" or negatively charged "anion".Neutral molecule has a net charge of zero.So, the species that are ions are:
NH₄⁺
H₂PO₄⁻
H₃O⁺
Answer:
NH₄⁺
H₂PO₄⁻
H₃O⁺
Explanation:
Why is it important to make observations first and inferences later
Answer:
Explanation:
Observation leads to drawing of inferences not the other way round. If no observation is made, then there is no basis of making inferences and testing them out.
Observations helps to gather facts and data through which patterns can be deduced and meaningful inferences made out. Observation is made using our five senses. Without first observing and pooling together some data, the basis of a scientific inquiry would falter along the line.
Inferences gives an arching overview to observations made. Inferences are made using prior experiences or knowledge. A times, we can notice some patterns in the data we have gathered and inferences can be made from them.
what is an extensive property? ( in regards to enthalpy )
The extensive properties come under physical property which depends on the size of the system. The enthalpy comes under extensive property which is a thermodynamic property where the internal energy; and the pressure and volume of the system is related.
The change in enthalpy is related to energy transfer at certain pressure which is related to the endothermic and exothermic reactions taking place on the system. Since, all these reactions and heat transfer from the system to the environment is based on the physical property, enthalpy is called as extensive property.
Earth is like a bar magnet. what does this mean about its magnetic poles
A. there are two magnetic north poles
B. there is only a magnetic pole
C. there are both magnetic north and south poles.
D. there is only a magnetic south pole
It's C that's correct.... (the are both magnetic north and south poles)
Earth is like a bar magnet, there are both magnetic north and south poles. Therefore, option (C) is correct.
Why does the earth behave like a bar magnet?A magnet can be defined as an object that has a north pole and south magnetic pole and a magnetic field. The idea that Earth is a magnet, was first proposed in 1600 by a British physician William Gilbert. He represented the earth as a magnet with help of a spherical magnet.
With a compass, the spherical magnet causes a compass needle to behave in a similar way that Earth causes a compass needle to behave. This indicated that a spherical magnet is a good model to represent that the Earth is a magnet.
Earth has north and south magnetic poles from which the North Pole is located at about 80° north latitude. The magnetic field is strongest at the poles, and magnetic field lines of magnetic force move from the north pole to the south magnetic pole.
Learn more about earth's magnetic field, here:
https://brainly.com/question/28463345
#SPJ2
WHEN parking uphill in a car with a manual transmission you should park with the transmission in
First gear OR reverse gear?????
For a manual transmission, park in first gear when facing uphill, and in reverse when facing downhill, always using the parking brake and turning the wheels away from the curb when parked uphill.
Explanation:When parking uphill in a car with a manual transmission, it is generally recommended to park with the transmission in first gear if you are facing uphill and reverse gear if you are facing downhill. This helps to ensure that if your parking brake fails, the engine will help prevent the car from rolling. However, always remember to use the parking brake regardless of the gear used. It is also advisable to turn your wheels away from the curb when parking uphill, so in the event your car begins to roll, it will roll into the curb which can help stop the car.
Learn more about Uphill Parking here:https://brainly.com/question/30491830
#SPJ12
What is the mass of oxygen atoms in 1 mole of water
The mass of oxygen atoms in 1 mole of water is 16 grams.
Explanation:This can be calculated by looking at the molecular formula of water, which is H2O. From this formula, we know that one molecule of water contains two hydrogen (H) atoms and one oxygen (O) atom.
Given that the molar mass of hydrogen is 1 gram/mole and the molar mass of oxygen is 16 grams/mole, we can determine that the mass ratio of hydrogen to oxygen in a water molecule is 2:1.
Therefore, in 1 mole of water, we have 2 moles of hydrogen atoms and 1 mole of oxygen atoms.
Multiplying the molar mass of oxygen (16 grams/mole) by the number of moles (1 mole) gives us a mass of 16 grams for the oxygen atoms in 1 mole of water.
In what characteristic property must two liquids differ if a mixture of them is to be separated by fractional distillation
Answer:
Boiling point
Explanation:
If the liquids have different boiling points, you can separate them by distillation.
You must carefully control the temperature, so only the liquid with the lower boiling point evaporates, and you can collect it using a condenser.
The boiling points should differ by at least 40 °C for a simple distillation to give good separation.
How many grams of H2 are needed to produce 13.33g of NH3?
The reaction to form NH3 is : N2 + 3H2-> 2NH3 12,33g NH3 is 12,33/17,03=0,3 =0,724 moles of NH3 moles NH3. So you need 1,5*0,724 = 1,086 moles H2 1,086*2,016 = 2,189 g of H2 is needed ro form 12,33 g NH3
Which consequence of global warming is described as having an increase in growing season changes in migration and loss of species
Answer:
Deforestation, increase wildlife extinction, ecosystem imbalances, soil erosion, migration and loss of species.
Explanation:
Global warming is warming the earth's surface temperature, which causes the changes in our ecosystem like deforestation, soil erosion, climate changes, migration and loss of species etc.
Global warming is caused by the 'Greenhouse effect', major gases are carbon dioxide(9-26%), methane(4-9%), water vapour(36-70%) ozone(3-7%) and nitrous oxide.
Global warming affects on the ocean include rising sea level, meiting glaciers, thermal expansion and ice sheets. It also cause the bird migration which carries high cost of predation and mortality.
Answer:
D. altered ecosystems
Explanation:
Deforestation, increase wildlife extinction, ecosystem imbalances, soil erosion, migration and loss of species are all effects of global warming. These are under the umbrella of consequences from global warming.
Which of these extends the farthest out into the ocean ( beach berm or shore)
Answer:
berm
a berm can be somethint in the middle or water and you can see it once the water go down oe dryes
3. Because tap water is slightly acidic, water pipes made of iron corrode over time, as shown by the balanced ionic equation below. Explain, in terms of chemical reactivity, why copper pipes are less likely to corrode than
iron pipes.
2Fe(s) + 6H*(aq) → 2Fe3+(aq) + 3H2(g)
please someone help with this
acidic tap water form green layer ofcarbonate on copper surface which prevent it from corrosion but iron when react to water and oxygen form rust
also fe lies above than cu in activity series
The chemical reactivity of copper is less than iron and with the formation of stable copper oxide, copper pipes are less likely to corrode.
What is corrosion?The corrosion or rusting is the chemical phenomenon given by an element that results in the decomposition of the metal into stable oxide.
The copper metal in the presence of oxygen forms the more stable and unreactive copper oxide that protect the metal from corrosion.
The chemical equation for the formation of copper oxide is:
4 Cu + O₂ → 2 Cu₂O
Learn more about corrosion, here:
https://brainly.com/question/489228
#SPJ2
A container of hydrogen at 172 kpa was decreased to 85.0 kpa producing a new volume of 765 mL. What was the original volume
Answer:
[tex]\boxed{\text{378 mL}}[/tex]
Explanation:
The temperature and amount of gas are constant, so we can use Boyle’s Law.
[tex]p_{1}V_{1} = p_{2}V_{2}[/tex]
Data:
[tex]\begin{array}{rclrcl}p_{1}& =& \text{172 kPa}\qquad & V_{1} &= & \text{?} \\p_{2}& =& \text{85.0 kPa}\qquad & V_{2} &= & \text{765 mL}\\\end{array}[/tex]
Calculations:
[tex]\begin{array}{rcl}172V_{1} & =& 85.0 \times 765\\172V_{1} & = & 65 025\\V_{1} & = &\textbf{378 mL}\\\end{array}\\\text{The original volume was } \boxed{\textbf{378 mL}}[/tex]
Final answer:
Using Boyle's Law, which states that at a constant temperature the pressure and volume of a gas are inversely related, the original volume of hydrogen in the container can be calculated to be approximately 2211 mL.
Explanation:
To find the original volume of the hydrogen gas, we apply Boyle's Law, which states that the pressure of a gas multiplied by its volume is constant at constant temperature (P1V1 = P2V2). In the given problem, we have an initial pressure (P1) of 172 kPa, an unknown original volume (V1), a final pressure (P2) of 85.0 kPa, and a final volume (V2) of 765 mL.
Using the formula, we have:
172 kPa × V1 = 85.0 kPa × 765 mL
Now we solve for V1:
V1 = (85.0 kPa × 765 mL) / 172 kPa
V1 = 380.25 kPa·mL / 172 kPa
V1 = 2210.7558 mL
Therefore, the original volume of the hydrogen gas was approximately 2211 mL.
Need help on this ASAP !!!!
Answer:
N₂ + 3H₂ → 2NH₃. "synthesis reaction".
Explanation:
To balance the equation, you should apply the law of conservation of mass for the equations.
The law of conservation of mass states that the no. of each atom is equal in both sides (reactants and products).
The balanced equation is:
N₂ + 3H₂ → 2NH₃.
It is a synthesis reaction that 2 reactants give 1 product.
That 1.0 mole of N₂ reacts with 3.0 moles of H₂ to produce 2.0 moles of NH₃.
The no. of all atoms is the same in both of reactants and products side.
N (2), and H (6).
What is the pOH of a solution of HNO3 that has [OH– ] = 9.50 × 10–9 M?
Answer:
pOH = 8.02
Explanation:
Given:
[OH-] concentration for HNO3 solution = 9.50*10^-9 M
To determine:
pOH of the above solution
Explanation:
pOH of a given solution refers to the concentration of OH- ions i.e. the degree of basicity of that solution
[tex]pOH = -log[OH-]\\\\For\ the \ HNO3\ solution:\\\\pOH = -log(9.50*10^{-9}) = 8.02[/tex]
How many grams are in 11.9 moles of chromirum
Answer:
Explanation:
Method 1 proportion
1 mole of chromium is 52 grams
11.9 moles = x grams
1/11.9 = 52/x Cross multiply
x = 11.9 * 52
x = 618.8 grams
Now I have used an approximate mass for Chromium. The answer you get here is expected to reflect the weigth given on your periodic table Use that to get your answer. You should give a number very close to mine. Round to 3 places as in 619.
Method Two Formula
mols = given mass / molecular mass
11.9 = given mass / 51.9961 Multiply both sides by 51.9961
11.9 *51.9961 = given mass
given mass = 618.75
given mass = 619
4HCl + O2 ⇌ 2H2O + Cl2
Which of the following would result from increasing the volume of oxygen?
The volume of hydrochloric acid increases.
The rate of forward reaction increases.
The rate of backward reaction increases.
The volume of water vapor decreases.
Answer:
The rate of forward reaction increases.
Explanation:
Le Châtelier's principle states that when there is an dynamic equilibrium, and this equilibrium is disturbed by an external factor, the equilibrium will be shifted in the direction that can cancel the effect of the external factor to reattain the equilibrium.Increasing the volume of oxygen:
will increase the concentration of oxygen (reactants), so the equilibrium will be shifted to the right side (products side) to suppress the effect of increasing the volume of oxygen.
So, the right choice is: The rate of forward reaction increases.
Describe an object that is transparent. What quality makes it transparent?
Answer: Water
Explanation: Water is an example of transparent because light can pass through it. Air is also an example.
Final answer:
A transparent object, such as a clean glass window, transmits light without significant absorption or reflection. The quality that makes an object transparent is its ability to let light pass through it effectively, as seen in high-quality diamonds, which refract white light and disperse it into its composite colors, causing a sparkling effect.
Explanation:
An object that is transparent allows light to pass through it without scattering, making it possible to see through the object clearly. A common everyday example of a transparent object is a clean glass window. Glass is transparent because it transmits light rather than absorbing or reflecting it, thus allowing a high proportion of the light spectrum to pass through without significant distortion.
The quality that makes an object transparent is its ability to transmit light waves effectively. When light encounters a transparent material, the photons that make up the light are not significantly absorbed by the material's atoms or reflected away, but rather they pass through the atomic structure of the material without being scattered.
A perfect example of this phenomenon is a high-quality diamond, which is clear and colorless, transmitting all visible wavelengths of light. The diamond sparkles with flashes of brilliant color when illuminated by white light because it refracts, or bends, the light, splitting it into its composite colors in a process similar to a prism. This is known as dispersion, which coupled with the internal reflections within the diamond due to its cut and high refractive index, causes the sparkle with various colors.
how many low dose 81mg aspirin tablets can be made 1.21kg of aspirin
Answer: The number of tablets that can be made for the given mass of aspirin is 14938
Explanation:
We are given:
Total mass of aspirin = 1.21 kg = 1210000 mg (Conversion factor: 1 kg = 1000000 mg)
Mass of aspirin in 1 tablet = 81 mg
To calculate the number of tablets, we divide the total mass of aspirin to the mass of aspirin in 1 tablet, we get:
[tex]\text{Number of tablets}=\frac{\text{Total mass of aspirin}}{\text{Mass of aspirin in 1 tablet}}[/tex]
[tex]\text{Number of tablets}=\frac{1210000mg}{81mg}=14938.3\approx 14938[/tex]
Hence, the number of tablets that can be made for the given mass of aspirin is 14938
14938 low dose aspirin tablets can be made from 1.21kg aspirin.
CONVERSION FACTOR:
The mass of aspirin is given as 1.21kg and we were asked to determine the number of low dose aspirin tablets weighing 81mg each that can be made from it. First, we need to make both measurements equal. The conversion factor of kg and mg is as follows:Conversion factor: 1 kg = 1000000 mg
Hence, 1.21kg = 1.21 × 1000000
= 1210000 mg
Hence, the number of low dose aspirin tablets that can be made from 1210000mg of aspirin is calculated as follows:= 1210000 ÷ 81
= 14938.27
Approximately, 14938 low dose aspirin tablets can be made from 1.21kg of aspirin.Learn more: https://brainly.com/question/2139943?referrer=searchResults
A lab director asks two students, Lydia and Damien, to each select a bottle of a concentrated weak base. When they reach the
cabinets, they find different chemical solutions with varying concentrations. All of the options are bases. Which bottles should they choose?
Lydia should select the bottle of _______. Damien should select the bottle of ________
Answer:
First one is 5.0 M ammonia and the Second one ?
Explanation:
Lydia and Damian will select bases with low kb that are present in highly concentrated solutions in the storage cabinet.
What are Bases?In a chemical process, bases are compounds that can accept hydrogen ions (H+). They often taste bitter, are slippery to the touch, and have the ability to change the color of litmus paper from red to blue. Typical examples of bases are sodium hydroxide (NaOH), ammonia (NH3), and baking soda (sodium bicarbonate, NaHCO3). Acids, which cause a chemical reaction to release hydrogen ions (H+), are the opposite of bases.
The ability of a base to accept hydrogen ions determines the strength of the base. While weak bases, such as ammonia, have a low affinity for hydrogen ions and can only partially dissociate in water, strong bases, such as sodium hydroxide, have a high affinity for hydrogen ions and can dissociate completely in water. Alkalis play an important role in many chemical processes.
Therefore, Lydia and Damian will select bases with low kb that are present in highly concentrated solutions in the storage cabinet.
Learn more about bases, here:
brainly.com/question/4056439
#SPJ5
how many grams of silver chromate, Ag2CrO4, are produced from 57.7
g of silver nitrate, AgNO3?
what is the charge on the cation in the ionic compund sodium sulfide
Answer:
Since this is an ionic compound, you must balance the charges so that overall charge of the compound is neutral. Sodium, an alkali metal, has a tendency to lose one electron. As a result sodium normally carries a positive one charge. Sulfur, a nonmetal, has a tendency to gain 2 electrons.
Explanation:
Answer:
Sodium commonly forms a
+
I
ion.
Explanation:
And thus the chemical formula for sodium sulfide is
Na2S , i.e. two sodium ions are required to form a neutral salt with
S2-
what is the percent composition of iron in FeCl3
Final answer:
The percent composition of iron in FeCl3 is 34.43%.
Explanation:
The percent composition of iron in FeCl3 can be calculated by dividing the mass of iron by the molar mass of FeCl3 and multiplying by 100%. FeCl3 consists of one iron atom and three chlorine atoms. The atomic mass of iron is 55.845 g/mol and the atomic mass of chlorine is 35.453 g/mol. Therefore, the molar mass of FeCl3 is 55.845 g/mol + 3 * 35.453 g/mol = 162.204 g/mol. The mass of iron in FeCl3 is 55.845 g/mol / 162.204 g/mol * 100% = 34.43%.
What is the name of this compound?
2-butanone
2-pentanone
4-pentanone
4-butanone
Answer:
2-pentanone
Explanation:
The oxygen atom is attached to the 2nd carbon atom in the longest linear chain, thus the prefix 2. the longest continuous carbon chain has five carbon atoms giving it the prefix pent-. the chemical is a ketone thus the suffix none.
The latent heat of vaporization of water is 540 calories/gram. How many calories are required to completely vaporize 500 grams of water? 1,040 cal 40 cal 270,000 cal 1.08 cal
The amount of heat needed to vaporize the given amount of water is the product of the amount in grams and the latent heat of vaporization in cal per gram. That is,
H = (540 calories / gram)( 500 grams) = 270,000 cal
Thus, the heat needed is 270, 000 calories. The answer is letter C.
Hope this helps :) thats just a sh
Answer:
270,000 cal
Explanation:
In order to calculate the calories needed to completely vaporize 500 grams of water we just have to use the formula of the latent heat of vaporization, we know that it takes 540 calories to vaporize a gram of water, so we just multiply that by the number of grams:
(500 grams of water)(540 calories/gram)= 270,000 calories
It would taje 270,000 calories to vaporize 500 grams of water.
How are pressure units converted ?
Answer: 1 = 1e-5
Explanation: Divide the pressure value by 100000
petrolium is a mixture consisting mostly of
Answer:Petroleum is a naturally occurring complex mixture made up predominantly of carbon and hydrogen compounds
Explanation:
You rub a balloon on your head and it becomes negatively charged. The balloon will be MOST attracted to
A) a piece of metal.
B) positively charged hair.
C) the neutrally charged wall.
D) another negatively charged balloon.
Answer: option B is correct. im gonna turn u into a balloon
Explanation:
The answer is B positively charged hair
36 grams of water vapor takes up how many liters at room temperature and pressure (293 K and 100 kPa)?
Answer:
V = 48.7 L
Explanation:
We can calculate the volume V, by using the ideal gas law:
P V = n R T
Where we have:
P is the pressure, V is the volume, and T is the temperature T, R is the gas constant, and n is the number of moles of the gas.
According to the international unit systems R is 8.314 J / K. mol.
With this value the P unit will be Pa and the V unit will be m³.
Then,
V = (n R T)/ P
V = [(36/18) × 8.314 × 293] / (100 * 1000)
V = 0.0487 m³
And the volume by litter unit is:
V = 48.7 L
What are genes?
a) the observable characteristic
b) the expressed trait
c) the basic unit of inheritance
d) the measurable factor
C) the basic unit of inheritance
In an experiment you are asked to react hydrochloric acid with sodium hydroxide. When measuring the volume of the reactants, which instrument would give the greatest precision?
100 mL Graduated cylinder
250 mL Erlenmeyer flask
100 mL Beaker
200 mL Beaker
Answer:
100 mL Graduated cylinder.
Explanation:
The instrument would give the greatest precision is 100 mL Graduated cylinder.
Because it has the smallest diameter and it is graduated every 1.0 mL. so, its error percent is the lowest.
Beaker and Erlenmeyer flask have a greater diameter and their grauation is every 10.0 mL. So, their error % is larger.
Answer:
The answer would be 100 ml graduated cylinder
Explanation: