Answer:
Answer explained with detail below
Explanation:
Consider the solution given by the greedy algorithm as a sequence of packages, here represented by indexes: 1, 2, 3, ... n. Each package i has a weight, w_i, and an assigned truck t_i. { t_i } is a non-decreasing sequence (as the k'th truck is sent out before anything is placed on the k+1'th truck). If t_n = m, that means our solution takes m trucks to send out the n packages.
If the greedy solution is non-optimal, then there exists another solution { t'_i }, with the same constraints, s.t. t'_n = m' < t_n = m.
Consider the optimal solution that matches the greedy solution as long as possible, so \for all i < k, t_i = t'_i, and t_k != t'_k.
t_k != t'_k => Either
1) t_k = 1 + t'_k
i.e. the greedy solution switched trucks before the optimal solution.
But the greedy solution only switches trucks when the current truck is full. Since t_i = t'_i i < k, the contents of the current truck after adding the k - 1'th package are identical for the greedy and the optimal solutions.
So, if the greedy solution switched trucks, that means that the truck couldn't fit the k'th package, so the optimal solution must switch trucks as well.
So this situation cannot arise.
2) t'_k = 1 + t_k
i.e. the optimal solution switches trucks before the greedy solution.
Construct the sequence { t"_i } s.t.
t"_i = t_i, i <= k
t"_k = t'_i, i > k
This is the same as the optimal solution, except package k has been moved from truck t'_k to truck (t'_k - 1). Truck t'_k cannot be overpacked, since it has one less packages than it did in the optimal solution, and truck (t'_k - 1)
cannot be overpacked, since it has no more packages than it did in the greedy solution.
So { t"_i } must be a valid solution. If k = n, then we may have decreased the number of trucks required, which is a contradiction of the optimality of { t'_i }. Otherwise, we did not increase the number of trucks, so we created an optimal solution that matches { t_i } longer than { t'_i } does, which is a contradiction of the definition of { t'_i }.
So the greedy solution must be optimal.
Select a data definition statement that creates an array of 500 signed doublewords named myList and initializes each array element to the value ?1.
a. SDWORD myList 500 DUP (-1)
b. myList 500 SDWORD DUP (-1)
c. myList 500 SDWORD (-1)
d. myList SDWORD 500 DUP (-1)
Answer:
The answer is "Option b".
Explanation:
In the given question there is a miss typing problem, in this question at the last line there we use "value -1 ?"
In the question, it is defined that an array "myList" declares that includes 500 signed double words. To define this type of data first array name is used than the size of the array then the function that is "SDWORD and DUP" which defines its values, in this question except option b all are wrong that can be described as follows:
In option a, It is correct because for define any array firstly we use array name. In option c, It is not correct because this does not use both functions. In option d, In this code after array name, the function is used first that's incorrect.Write the definition of a class Telephone. The class has no constructors and one static method getFullNumber. The method accepts a String argument and returns it, adding 718- to the beginning of the argument.
Answer:
public class Telephone {
public static String getFullNumber(String a) {
return ("718-" + a);
}
}
In the explanation section we show the method in use with some displayed output
Explanation:
The code to create an object of the class and use its method getFullNumber(String a) is given below:
public class TestClass {
public static void main(String[] args) {
Telephone TelephoneOne = new Telephone();
String newNumber=TelephoneOne.getFullNumber("080657288");
System.out.println(newNumber);
}
}
What will be the result of running the following code fragment? int year = 0; double rate = 5; double principal = 10000; double interest = 0; while (year < 10) { interest = (principal * year * rate) / 100; System.out.println("Interest " + interest); }
Answer:
This code fragment will run an infinite loop
Explanation:
This output: Interest 0.0 Will be displayed infinitely. The reason is because the variable year which is initially set to 0 is never updated and as such remains true because the condition is while(year<10). So at the first iteration the statement interest = (principal * year * rate) / 100; evaluates to 0 and this line of code System.out.println("Interest " + interest); prints Interest 0.0. At the next iteration the same evaluation and output takes place and on and on and on....... since the control variable is not changing.
Which technology can be used to protect the privacy rights of individuals and simultaneously allow organizations to analyze data in aggregate?
Answer:
De-identification or data anonymization.
Explanation:
Privacy rights are fundamental right of individuals to privatise all personal information, when creating an account.
The de-identification and data anonymization technology is provided by the organisation to user, to prevent their information to be viewed by others. It commonly used in cloud computing, communication, internet, multimedia etc. Reidentification is the reversing of the de-identification effect on personal data.
Using basic programming (for loops, while loops, and if statements), write two MATLAB functions, both taking as input:
- dimension n;
- n x n matrix A;
- n x n matrix B;
-n × 1 vector x.
Have the first function compute ABx through (AB)x and the second compute ABx through A(Bx). Have both output:
- the number of flops used.
(a) Print out or write out the first function.
(b) Print out or write out the second function.
(c) Apply both your functions to the case with random matrices and vectors for n = 100 and print out or write out the results. Do the same for 200 x 200, 400 x 400, and 800 x 800. Which approach of computing ABx is faster?
Answer:
For n = 100
(AB)x: 10100A(Bx): 200For n = 200
(AB)x: 40200A(Bx): 400For n = 400
(AB)x: 160400A(Bx): 800For n = 800
(AB)x: 640800A(Bx): 1600The faster approach is A(Bx)
Explanation step by step functions:
A(Bx) is faster because requires fewer interactions to find a result: for (AB)x you have (n*n)+n interactions while for A(Bx) you have n+n, to understand why please see the step by step:
a) Function for (AB)x:
function loopcount1 = FirstAB(A,B,x)
n = size(A)(1);
AB = zeros(n,n);
ABx = zeros(n,1);
loopcount1 = 0;
for i = 1:n
for j = 1:n
AB(i,j) = A(i,:)*B(:,j);
loopcount1 += 1;
end
end
for k = 1:n
ABx(k) = AB(k,:)*x;
loopcount1 += 1;
end
end
b) Function for A(Bx):
function loopcount2 = FirstBx(A,B,x)
n = size(A)(1);
Bx = zeros(n,1);
ABx = zeros(n,1);
loopcount2 = 0;
for i = 1:n
Bx(i) = B(i,:)*x;
loopcount2 += 1;
end
for j = 1:n
ABx(j) = A(j,:)*Bx;
loopcount2 += 1;
end
end
In this exercise we want to use computer and python knowledge to write the code correctly, so it is necessary to add the following to the informed code:
The correct code that corresponds to the question informed is attached in the photo and we can notice that the faster approach is A(Bx).
So knowing that the information given in the text is that;
For n = 100:
(AB)x: 10100 A(Bx): 200For n = 200:
(AB)x: 40200 A(Bx): 400For n = 400:
(AB)x: 160400 A(Bx): 800For n = 800:
(AB)x: 640800 A(Bx): 1600A(Bx) exist faster cause demand hardly any interplay to find a result: for (AB)x you bear (n*n)+n interplay while for A(Bx) you bear n+n, so we have that:
a)Watching the function for (AB)x:
function loopcount1 = FirstAB(A,B,x)
n = size(A)(1);
AB = zeros(n,n);
ABx = zeros(n,1);
loopcount1 = 0;
for i = 1:n
for j = 1:n
AB(i,j) = A(i,:)*B(:,j);
loopcount1 += 1;
end
end
for k = 1:n
ABx(k) = AB(k,:)*x;
loopcount1 += 1;
end
end
b) Watching the function for A(Bx):
function loopcount2 = FirstBx(A,B,x)
n = size(A)(1);
Bx = zeros(n,1);
ABx = zeros(n,1);
loopcount2 = 0;
for i = 1:n
Bx(i) = B(i,:)*x;
loopcount2 += 1;
end
for j = 1:n
ABx(j) = A(j,:)*Bx;
loopcount2 += 1;
end
end
See more about computer at brainly.com/question/950632
Opportunities in nanotechnology apply broadly to many fields. Identify TWO areas of IT that may be impacted by its further development. Select one: a. quantum computing and telecommunications b. photolithography and genetics c. photolithography and alternative energy d. telecommunications and genetics
Answer:
a. quantum computing and telecommunications
Explanation:
Both quantum computing and telecommunications need materials with specific optical, electrical, and magnetic properties to advance, and nanotechnologies open the opportunity for nanomaterial with incredible properties. From antennas with special magnetic properties to faster optical fiber from more stable material to store qubits to super thermal insulators, nanotechnologies will change the way we build and design telecommunication systems, and it will allow us to build stable and reliable quantum computers.
Write a program whose input is an email address, and whose output is the username on one line and the domain on the second. Example: if the input is:
pooja@piazza.com
Then the output is
username: pooja
domain: piazza.com
The main program is written for you, and cannot be modified. Your job is to write the function parseEmailAddress defined in "util.cpp" The function is called by main() and passed an email address, and parses the email address to obtain the username and domain. These two values are returned via reference parameters. Hint: use the string functions .find() and .substr(),
main.cpp is a read only file
#include
#include
using namespace std;
// function declaration:
void parseEmailAddress(string email, string& username, string& domain);
int main()
{
string email, username, domain;
cout << "Please enter a valid email address> ";
cin >> email;
cout << endl;
parseEmailAddress(email, username, domain);
cout << "username: " << username << endl;
cout << "domain: " << domain << endl;
return 0;
}
/*util.cpp*/ is the TODO file
#include
#include
using namespace std;
//
// parseEmailAddress:
//
// parses email address into usernam and domain, which are
// returned via reference paramters.
//
void parseEmailAddress(string email, string& username, string& domain)
{
//
// TODO: use .find() and .substr()
//
username = "";
domain = "";
return;
}
Answer:
1 void parseEmailAddress(string email, string& username, string& domain)
2 {
3 int found = email.find("@")
4 if (found > 0)
5 {
6 username = email.substr(0, found);
7 domain = email.substr(found+1, -1);
8 }
9 return;
10}
Explanation line by line:
We define our function.We use an open curly bracket to tell the program that we are starting to write the function down.We apply the find method to the email variable that was passed by the main program. The find method tells us where is the "@" located within the email.We use an if statement to ensure that the value that we found is positive (The value is negative if an only if "@" is not in the email address).We use an open curly bracket to tell the program that we are starting to write inside the if statement. We apply the substr method to the email to take the username; it receives a start and an end value, this allows us to take from the beginning of the email (position 0) until the "@". We apply the substr method to the email to take the domain; it receives the position of the "@" character plus one to take the first letter after the "@" and a minus-one representing the last character on the email.We use a closing curly bracket to tell the program that the if statement has finished.We return nothing because we are using reference parameters, which means that the memory positions of username and domain are going to be filled by our parseEmailAddress function and the main function can access those values directly.We use a closing curly bracket to tell the program that the function has finished.
Assuming we are using the Hamming algorithm presented in your text and even parity to design an error-correcting code, find the code word to represent the 8-bit information word 10011011
Answer:
Before redundancy :100101011100
After checking parity redundancy: 100101010011
Explanation:
First calculate redundant bits ,
We know that the number of redundant bits can be calculated using the following formula:
2^r ≥ m + r + 1
r = redundant bit, m = data bit
total data bits = 8
so ,
2^4 ≥ 8 + 4 + 1
16 ≥ 13
so, redundant bits is 4
Now let they denoted by r1, r2, r4, and r8, as the redundant bits are placed at positions corresponding to power of 2: 1, 2, 4, and 8.
All the redundant bits are initialized by zero.
For the data word 10011011, we can let the bits of the data word as w8,w7, w6, w5, w4, w3, w2, w1
Now , put data bits and redundancy bits as follows.
d12 d11 d10 d9 d8 d7 d6 d5 d4 d3 d2 d1
w8 w7 w6 w5 r8 w4 w3 w2 r4 w1 r2 r1
1 0 0 1 0 1 0 1 0 0 0 0
r1 = d1 xor d3 xor d5 xor d7 xor d9 xor d11
r1 = 0 xor 0 xor 1 xor 1 xor 1 xor 0
r1 = 1
r2 = d2 xor d3 xor d6 xor d7 xor d10 xor d11
r2 = 0 xor 0 xor 0 xor 1 xor 0 xor 0
r2 = 1
r4 = d4 xor d5 xor d6 xor d7
r4 = 0 xor 1 xor 0 xor 1
r4 = 0
r8 = d8 xor d9 xor d10 xor d11 xor d12
r8 = 0 xor 1 xor 0 xor 0 xor 1
r8 = 0
So, the data transferred is
d12 d11 d10 d9 d8 d7 d6 d5 d4 d3 d2 d1
w8 w7 w6 w5 r8 w4 w3 w2 r4 w1 r2 r1
1 0 0 1 0 1 0 1 0 0 1 1
The bits give the binary number as 0011 whose decimal representation is 3. Thus, the bit 3 contains an error. To correct the error the 3th bit is changed from 1 to 0.
Final answer:
To encode the 8-bit information word 10011011 using the Hamming code and even parity, we would need to insert parity bits into specific positions, resulting in a 12-bit code word composed of the original data and additional parity bits.
Explanation:
The Hamming code is a data protection algorithm used for error detection and correction. To find the Hamming code for the 8-bit information word 10011011 using even parity, you would need to insert parity bits at positions that are powers of 2 (i.e., positions 1, 2, 4, 8,...).
For each parity bit, you would determine whether the number of bits in positions it checks (including itself) is even or odd. In this case, if the number is odd, you would set the parity bit to 1 to achieve even parity, otherwise, set it to 0.
Without working through a specific example, the resulting codeword would be a 12-bit word consisting of the original 8 information bits and an additional 4 parity bits (since 8-bit data would require 4 parity bits for the Hamming encoding).
Do you believe that OOP should be phased out and we should start working on some alternative(s)? Provide your answer with Yes or No.
Give your opinion with two solid reasons to support your answer.
Answer:
I don't think so. In today's computer era, many different solution directions exist for any given problem. Where OOP used to be the doctrine of choice, now you would consider it only when the problem at hand fits an object-oriented solution.
Reason 1: When your problem can be decomposed in many different classes with each many instances, that expose complex interactions, then an OO modeling is justified. These problems typically produce messy results in other paradigms.
Reason 2: The use of OO design patterns provides a standardized approach to problems, making a solution understandable not only for the creator, but also for the maintainer of code. There are many OO design patterns.
A 'deny any-any' rule in a firewall ruleset is normally placed: a. Nowhere in the ruleset if it has a default allow policyb. Below the last allow rule, but above the first deny rule in the rulesetc. At the top of the rulesetd. At the bottom of the ruleset
Answer:
D. . At the bottom of the ruleset
Explanation:
The main purpose of firewalls is to drop all traffic that is not explicitly permitted. As a safeguard to stop uninvited traffic from passing through the firewall, place an any-any-any drop rule (Cleanup Rule) at the bottom of each security zone context
State three reasons that Visual Basic is one of the most widely used programming languages in the world.
Visual Basic is widely used for three reasons: it is easy to learn, provides rapid application development, and integrates well with Microsoft products.
Explanation:Three Reasons Visual Basic is Widely UsedEasy to Learn: Visual Basic is known for its simplicity and beginner-friendly nature. The language uses a graphical user interface (GUI) and provides drag-and-drop functionality, making it easier for new programmers to understand and create applications.Rapid Application Development (RAD): Visual Basic offers a wide range of pre-built components and controls that simplify the development process. Developers can quickly prototype and create applications, reducing the time and effort required to build software.Integration with Microsoft Products: Visual Basic is developed and supported by Microsoft, which provides extensive documentation, resources, and integration with other Microsoft technologies like Excel, Word, and Access. This makes it a popular choice for building Windows-based applications.Learn more about Reasons for Visual Basic's popularity here:https://brainly.com/question/36344044
#SPJ3
A data file "parttolerance.dat" stores on one line, a part number, and the minimum and maximum values for the valid range that the part could weigh. Write a script "parttol" that will read these values from the file, prompt the user for a weight, and print whether or not that weight is within range. For example, IF the file stores the following:>> type parttolerance.dat123 44.205 44.287Here might be examples of executing the script:>> parttolEnter the part weight: 44.33The part 123 is not in range>> parttolEnter the part weight: 44.25The part 123 is within range
Final answer:
The script 'parttol' reads a data file with part numbers and weight tolerances, prompts for a weight input, and assesses if it's within range, providing feedback on part validity.
Explanation:
The question involves writing a script parttol for reading a data file named parttolerance.dat which contains part numbers and their respective weight tolerance ranges. The script should then prompt the user for a weight input and determine if that weight is within the range specified for a part number.
Here's a pseudocode outline for the parttol script:
Open and read the contents of parttolerance.dat.Extract the part number, minimum, and maximum weight values.Prompt the user to enter a weight.Check if the entered weight is within the range.Print a message indicating whether the part is within range.The execution of this script provides feedback to the user about the validity of the part's weight, thereby ensuring quality control in a manufacturing or engineering context.
What type of analysis should be used to respond to the statement, "Let's cut advertising by $1000 repeatedly so we can see its relationship to sales"?
Answer:
Sensitivity analysis.
Explanation:
Data analytics is a method of interpreting a large group of data, that predicts future outcomes or describe current situation of the company, for appropriate decision to be made. Analyzing data creates a flexible environment to change data to observe the resultant output.
Sensitivity analysis is used to analyse uncertain output by changing the input. It is used to ascertain if an output generated by a determined input can be desirable or considered.
What would be the output of the following program?
int main() {
struct message
{ int num;
char mess1[50];
char msg2[50] ;
} m ;
m. num = 1;
strcpy (m.msg1, "We had lot of homework." );
strcpy(m.msg2," Hope it is the last one);
/* assume that the strucure is located at address 2004*/
printf ("\n%u%u%u\n", &m.num, m.msgi, m3 m2 m.msg2 );
printf ("\n%d %s %s", m.num,m.msgi, m.msg2);
return 0;
}
Answer:
Output: 2004 2008 2058
Explanation:
In the first printf command it will print the address of the variables num, msg1, msg2. And in the second printf command it will print the values of the variables num, msg1, msg2. As the address of the structure is 2004 And the size of the integer is 4 byte so size will increase with 4 bytes and the size of character is 1 byte so it will increase by 1*50= 50 bytes.
Hence, the output is 2004 2008 2058
When information is modified by individuals not authorized to change it you have suffered a:_____a. Loss of confidentiality b. Loss of integrity c. Loss of functionality d. Loss of availability
Answer:
b. Loss of integrity
Explanation:
Integrity: It is the information protection technique which ensures that the information is not modified by the unintended individuals.
What does this method do?
public static int foo(String [][] a)
{
int b = 0;
for (int I = 0; i
{
b++;
}
return b;
}
COMPLETE QUESTION:
What does this method do?
public static int foo(String [][] a)
{
int b = 0;
for (int i = 0; i<a.length; i++)
{
b++;
}
return b;
}
Answer:
Returns the value of b which is the dimension of the array
Explanation:
The method foo accepts a multi dimension array and returns the dimension of the array. A complete code implementation and call to the method is given below:
public class TestClass {
public static void main(String[] args) {
String [ ] [ ] arr = {{"gh","hj","fg", "re","tr"},{"","er","df","fgt", "tr"}};
System.out.println(foo(arr));
}
public static int foo(String [ ][ ] a)
{
int b = 0;
for (int i = 0; i<a.length; i++)
{
b++;
}
return b;
}
}
The output from the code snippet is the value of b which is 2
We will pass in 2 values, X and Y. You should calculate XY XY and output only the final result. You will probably know that XY XY can be calculated as X times itself Y times. # Get X and Y from the command line:import sysX= int(sys.argv[1])Y= int(sys.argv[2])# Your code goes here
Answer:
import sys
# The value of the second argument is assigned to X
x = int(sys.argv[1])
# The value of the third argument is assigned to Y
y = int(sys.argv[2])
# The result of multiplication of x and y is assigned to 'result'
result = x * y
#The value of the result is displayed to the user
print("The result of multiplying ", x, "and ", y, "is", result)
Explanation:
First we import sys which allow us to read the argument passed when running the program. The argument is number starting from index 0; the name of the python file been executed is sys.argv[0] which is the first argument. The second argument is sys.argv[1] and the third argument is sys.argv[2].
The attached file is named multplyxy (it wasn't saved as py file because the platform doesn't recognise py file); we can execute it by running: python3 multiplyxy.py 10 23
where x will be 10 and y will be 23.
To run the attached file; it content must be saved as a py file: multiplyxy.py
A(n) __________ in the name of a form indicates a hierarchy of namespaces to allow the computer to locate the Form class in a computer’s main memory.
Answer:
A dot member access operator in the name of a form indicates a hierarchy of namespaces to allow the computer to locate the Form class in a computer’s main memory.
Dot (.) operator is known as "Class Member Access Operator" in C++ programming language, it is used to grant access to public members of a class. Public members contain data members (variables) and member functions (class methods) of a class.
If someone’s boss wanted to send a message to an employee that contains both a video and a Word processing document, which Internet service would be the most appropriate for her to use?\
Answer:
Email.
Explanation:
Email or electronic mail is a digital messaging platform that sends digitised data through the internet to a specific or group of specified receivers.
It uses the IMAP protocol to download copies of received data from the server to the client's computer and the POP protocol to store the data only on the server, with a copy sent to the client.
The email environment provides an attachment tool to add video, image or audio files to text documents on the message to be sent across.
Create an application for a library and name it FineForOverdueBooks. TheMain() method asks the user to input the number of books checked out and the number of days they are overdue. Pass those values to a method named DisplayFine that displays the library fine, which is 10 cents per book per day for the first seven days a book is overdue, then 20 cents per book per day for each additional day.
The library fine should be displayed in the following format:
The fine for 2 book(s) for 3 day(s) is $0.60
(The numbers will vary based on the input.)
Answer:
//The Scanner class is imported which allow the program to receive user input
import java.util.Scanner;
//Class Solution is defined to hold problem solution
public class Solution {
// The main method which signify the begining of program execution
public static void main(String args[]) {
// Scanner object 'scan' is defined to receive input from user keyboard
Scanner scan = new Scanner(System.in);
// A prompt is display asking the user to enter number of books
System.out.println("Please enter number of books: ");
// the user response is assigned to numberOfBook
int numberOfBook = scan.nextInt();
// A prompt is displayed asking the user to enter the number of days over due
System.out.println("Please enter number of days over due: ");
// the user response is assigned to numberOfDaysOverDue
int numberOfDaysOverDue = scan.nextInt();
//displayFine method is called with numberOfBook and numberOfDaysOverDue as arguments
displayFine(numberOfBook, numberOfDaysOverDue);
}
//displayFine method is declared having two parameters
public static void displayFine(int bookNumber, int daysOverDue){
// fine for first seven days is 10cent which is converted to $0.10
double firstSevenDay = 0.10;
// fine for more than seven days is 20cent which is converted to $0.20
double moreThanSevenDay = 0.20;
// the fine to be paid is declared
double fine = 0;
// fine is calculated in the following block
if(daysOverDue <= 7){
//the fine if the over due days is less than or equal 7
fine = bookNumber * daysOverDue * firstSevenDay;
} else{
// the extra days on top of the first seven days is calculated and assigned to extraDays
int extraDays = daysOverDue - 7;
//fine for first seven days is calculated
double fineFirstSevenDays = bookNumber * 7 * firstSevenDay;
// fine for the extradays is calculated
double fineMoreThanSevenDays = bookNumber * extraDays * moreThanSevenDay;
// the total fine is calculated by adding fine for first seven days and the extra days
fine = fineFirstSevenDays + fineMoreThanSevenDays;
}
// The total fine is displayed to the user in a nice format.
System.out.printf("The fine for " + bookNumber + " book(s) for " + daysOverDue + " day(s) is: $%.02f", fine);
}
}
Explanation:
The program first import Scanner class to allow the program receive user input. Then the class Solution was defined and the main method was declared. In the main method, user is asked for number of books and days over due which are assigned to numberOfBook and numberOfDaysOverDue. The two variable are passed as arguments to the displayFine method.
Next, the displayFine method was defined and the fine for the first seven days is calculated first if the due days is less than or equal seven. Else, the fine is calculated for the first seven days and then the extra days.
The fine is finally displayed to the user.
Which type of attack modifies the fields that contain the different characteristics of the data that is being transmitted?
Answer:
An HTTP Header attack
Explanation:
In web applications an HTTP refers to Hypertext Transfer Protocol and an HTTP Header is the value that is displayed in a request or response message, the header has a name and a value separated by a colon.
An HTTP header attack called an header injection is a vulnerability that is present when users' inputs are required for the dynamic generation of HTTP headers. This vulneraility allows several security threats to be carried out, some examples are:
Malicious site redirection Cross-site scripting, and Session fixation through the set-cookie headerWhen disabling inherited permissions on an object, what happens if you select Remove all inherited permissions from this object?
Answer:
Answer explained below
Explanation:
When disabling inherited permissions on an object, if you select Remove all inherited permissions from this object then you lose every user or group assigned to the folder.
This will delete all existing permissions, including administrator accounts, leaving you a blank slate to apply your own permissions to the folder.
Consider a program to accept and tabulate votes in an election. Who might want to attack the program? What types of harm might they want to cause? What kinds of vulnerabilities might they exploit to cause harm?
Answer:
Who might want to attack the program to accept and tabulate votes in an election?
The political opponents.
What types of harm might they want to cause?
A silent interception; an interruption a modification and a fabrication
What kinds of vulnerabilities might they exploit to cause harm?
The assets vulnerablities.
Explanation:
Political opponents might want to attack the program to accept and tabulate votes in an election to modify factual results to show them as the winners.
The harm they might want to cause is cheating the elections by copying the program, data files or wiretapping; to get the system lost, or get it unavailable or unusable with the factual data in the large dams and disable the power grids and modify the values accordingly adding the forged results.
Security awareness training can include special all-hands meetings called __________ meetings that are held between team or departmental leaders, with those leaders then sharing the information they've gained from those meetings with employees.
Town Hall
Task Force
Awareness
Security Reminders
Answer:
Task Force
Explanation:
Task Force is a special unit formed to address or handle a specific task. A task force team can consist of several selected key persons such as team or departmental leaders. In this context, the task force meeting are held between the team leaders who gain information of security awareness training and then pass down the training information to the rest of their respective department employees.
A pair of single quotes ( ‘ ) will prevent the shell from interpreting any metacharacter.
True or False?
Answer: True
Explanation:
In Linux, a single quote around a string will prevent the shell from interpreting any metacharacter.
a. Using this Playfair matrix: J/K C D E F U N P Q S Z V W X Y R A L G O B I T H M Encrypt this message: I only regret that I have but one life to give for my country. quizzlet
Answer:
MAPAZOQHGKHWHMLITMIAKHPBASDGMCDHROCAFKRAFOFANPBLZY
Explanation:
To make it create a matrix with the letters provided without using the letter J. Then organize the message to be encrypted in pairs omitting the spaces and using a letter X if two letters are the same or if you have and an odd number of letters. Select each pair of letters to encrypt them one pair at a time, using the matrix paint a rectangular box around the letters to code them select the opposite letter in the rectangular box.
The packets used to transmit voice on the Internet are similar to the packets that are used to send email. What are some of the advantages of this approach ?
Answer:
Quality of service (QOS).
Explanation:
In recent computer networking, the convergence of voice, video and text data packet has been made possible. There is no need for a dedicated network for a particular type of packet.
QOS or quality of set is a service rendered to voice or audio packets in VoIP phones to enhance communication.
The email is a digital mailing system that can be used to send all three packets. It enjoys the QOS as voice packets. It is given high preference for transmission and uses the TCP protocol to transmit data reliably.
What are the first two models, e.g. diagrams that affect the entire system, that are built during the CoreProcess to discover and understand the details?
a. Workflow diagram
b. Work sequence diagram
c. Use case diagram
d. Class diagram.
e. Package diagram
f. Screen layouts
Answer:
The answer is "Option c and Option d".
Explanation:
A diagram for a case use is a UML dynamic or computational diagram, that is used in the case diagram model. It consists of a set of actions, services, and functions to be carried out by the system. and The class diagram refers to relationships between the UML classes and the source code that dependence, that is two diagrams that affect the system and others are wrong, which can be explained as follows:
In option a, It is used for business process, that's is not correct.In option b, It is used for both professionals industry like software and business, that's why it is wrong.In option e, It is used in only high-level language, that's why it is wrong.In option f, It is used to adjust its layout that's why it is wrong.
Which of the following is required for counter-controlled repetition?
A. a boolean
B. a method
C. a condition
D. All of the above
Counter-controlled repetition requires a condition to determine when the loop should stop, involving initializing a counter, setting a condition for it, and updating the counter within the loop. No boolean or method is strictly required, just the condition.
Explanation:The question asks which of the following is required for counter-controlled repetition. The correct answer is C. a condition. In computer programming, counter-controlled repetition requires a condition to determine when the repetition should stop. This involves initializing a counter to a starting value, setting a condition for the counter (such as counter < 10), and updating the counter within the loop (often incrementing or decrementing). This loop continues to execute as long as the condition evaluates to true.
For example, in a for loop, you might see something like for(int i = 0; i < 10; i++), where i is the counter, i < 10 is the condition that must be true for the loop to continue, and i++ updates the counter. No boolean or method is strictly required for this process, just the condition that guides the repetition.
The cardinality of a relationship is the maximum number of entity occurrences that can be involved in it. (T/F)
Answer:
False
Explanation:
In an entity relationship (ER) model, which is the conceptual illustration of certain entities and the relationships that exist between them, the cardinality of a relationship is the possible (minimum and maximum) number of entity occurrences that can be associated or involved in it.
Note: An entity is a real world object that is being modeled.
For example, a school has many staff members. The school and the staff members are the objects while the relationship between the school and the staff members is one-to-many.
One, many, zero are all values of cardinality.