Why cities near large bodies of cold water in summer experience well-developed see breezes but only poorly delevoped land breezes???

Answers

Answer 1
The difference in temperature between the sea and the land is the main reason of the formation of breezes.
Sea breeze is formed when the temperature of the sea is less than the temperature of the land while a land breeze occurs when the sea is warmer than the land. Cooler air rusher from area of lower temperature to that of higher temperature causing the breeze.
Cities near large bodies of cold water are mainly heat land, where at night, they are not noticeably cooler than the sea, which causes very weak land breeze while in the morning, the sea is much cooler causing a strong sea breeze. 

Related Questions

NAFTA countries include all of the following except a. Spain. c. Canada. b. Mexico. d. the United States.

Answers

It is a. Spain
NAFTA was an agreement signed by Canada, Mexico, and the US, but Spain was not part of the agreement.
hope this helps:)

Answer:

A.) Spain

Explanation:

The oblateness of earth occurs at the ______

Answers

Salutations!

The oblateness of earth occurs at the ______.

The oblateness of earth occurs at the poles.

Hope I helped!

Tectonic plates move at rates that are approximately ____________.

Answers

Salutations!

Tectonic plates move at rates that are approximately ____________.

Tectonic plates move at rates that are approximately 1 to 15cm per year.

Hope I helped!

Most tectonic plates move at rates of centimeters per year.

Different tectonic plates move at different rates, and rates vary depending on the methods used to measure them. Most plates move at rates of centimeters per year. For a comparison, fingernails grow at approximately the same rate.

From North to south how many miles does the Suez canal cover?

Answers

The canal extends 120 miles. 

Ultramafic rocks contain __________ and are commonly found in __________.

Answers

Ultramafic rocks contain "olivine," and are commonly found in "mantle."
mantle is a inner layer of a planet and makes up about 84% of the planet. Ultramafic rocks are found in layers, so naturally you will find this in the mantle layer of the planet.

Ultramafic rocks contain "olivine," and are commonly found in the "mantle."

What is Rock?

"A rock is defined as something that contains minerals. This is thought to be tough and powerful. This is the property from which the earth is formed. It has various qualities, and there are several sorts of Rock available."

The mentalism of the inner layer of the surface. It is made up of approximately 84% of the earth the surface area. It can be found in various layers and the rock with contains it is called olivine.

This Rock contains a very low amount of silica and has a composition of minerals and pyridoxine. Olivine has now been discovered in both stony or rocks meteorite. Olivine can also be found in various forms on planets and asteroids along the mafic barrier.

Learn more about Rock, here:

https://brainly.com/question/19930528

#SPJ12

One rod is made from lead and another from quartz. the rods are heated and experience the same change in temperature. the change in length of each rod is the same. if the initial length of the lead rod is 0.10 m, what is the initial length of the quartz rod?

Answers

Final answer:

The initial length of the quartz rod is 0.10 m, which is the same as the initial length of the lead rod.

Explanation:

To find the initial length of the quartz rod, we can use the fact that both rods experience the same change in length when heated. Let's assume the change in length is ΔL for both rods. We know that the change in length is given by the formula ΔL = αLΔT, where α is the coefficient of linear expansion, L is the initial length of the rod, and ΔT is the change in temperature.

Since the change in length is the same for both rods, we can set up an equation:

ΔLlead = ΔLquartz

αleadLleadΔT = αquartzLquartzΔT

Since ΔT and α are the same for both rods, we can simplify the equation to:

Llead = Lquartz

We are given that the initial length of the lead rod is 0.10 m, so the initial length of the quartz rod is also 0.10 m.

Learn more about heat expansion here:

https://brainly.com/question/36650404

#SPJ12

If magma or lava cools quickly, the resulting igneous rock will have ________.

Answers

The answer is very small crystals

Where are growth rings in trees most visible, thus making the use of dendrochronology most applicable? in tropical zones in desert areas in temperate zones in polar areas?

Answers

Growth rings in trees are most visible in temperate zones.  Growth rings which also called as tree rings or annual rings can be perceived in horizontal cross section cut through the trunk of the tree. It is the outcome of the new growth in the vascular cambium which is a layer of cells near in the bark that is categorized as a lateral meristem. The rings are more perceptible in temperate zones where the seasons vary more markedly. The inside ration of the growth ring is shaped primary in the developing season when growth is relatively rapid, hence the wood is less dense and is known as early wood or called as the spring wood or late spring wood. The outside ration is the late wood and has occasionally been called as summer wood regularly being made in the summer however sometimes in the autumn and is denser. 

Consider the changes that the Colorado River has undergone, especially as it relates to human activity in the region and the environmental effects of that activity. What social and cultural actions are affecting the river? What changes might the people living in the southwestern U.S. need to adopt?

Answers

The garbage people dump can effect the river over time sediments in the water have made it wider although industrialism in the area used much of the water.

Answer:

The Colorado River is facing major environmental changes and is at risk of drying up. Human actions along the river are primarily responsible for these changes. For the past century, farms, towns, and cities adjacent to the river have drawn off freshwater for agricultural or drinking purposes. Additionally, climate change has resulted in more intense droughts and less rainfall, which also contribute to the river’s shrinking size.

Most major cities in the region will need to drastically reduce the amount of water they take from the river basin. Las Vegas, Nevada, for instance, is a city of 2 million people, but it uses a small amount of water from the Colorado River compared to other cities in the region. Las Vegas laws impose water restrictions on people in the city. Other cities in the region will ultimately need to adopt similar rules and regulations to prevent the river from drying up.

Explanation: don't use the whole answer use what you think is important and maybe paraphrase it

What would be the correct relationship between the crust and the lithosphere?

Answers

Ud if ofodiekfixoek eh c ideiijf
Final answer:

The crust is a part of the lithosphere, which also includes the uppermost mantle. The lithosphere behaves as a rigid, brittle layer, distinguishing itself from the underlying, plastic asthenosphere, both essential in tectonic plate interactions.

Explanation:

The correct relationship between the crust and the lithosphere rests on understanding that Earth's outer surface consists of the crust, which is a cold, thin, brittle shell made of rock that exists in two distinct types, each with unique properties. The lithosphere, which is approximately 100 kilometers thick, is the outermost mechanical layer of the Earth, behaving as a rigid, brittle solid and comprising both the crust and the uppermost portion of the mantle. While the crust is part of the lithosphere, it is not synonymous with the lithosphere as it is distinguished by both its chemical composition and mechanical properties.

The lithosphere divides from the underlying asthenosphere, which is characterized by its plasticity and ability to flow, as it's composed of partially molten mantle material. This division has significant implications for tectonic plate interactions, such as pulling apart, subduction, sliding alongside, and compression, which are instrumental in shaping the geology of our planet.

factors that contribute to person becoming refugees

Answers

There are several factors that contribute to person becoming refugees (also termed as displaced people):
- because of war people have to leave their country
- natural disaster also contributes to person becming refugees
- violence and intimidation, so people flee from their homes to search for safety and protection
All refugees have the right so seek asylum, to have protection and to receive assistance. 

If you were scooping up sediment close to the shore of the Pacific Ocean, what would you most likely find?

Answers

it would most likely be coarse gravel.

Answer:

Sedimentary rocks

Explanation:

  Sediments and chemical sedimentary rocks are classified according to chemical composition and can be:

    Carbonatics: formed by the accumulation of carbonate minerals (limestone and dolomites) - the most common on Earth. Can be generated by reefs, inorganic reactions or even of mixed origin.

    Evaporites: formed by the precipitation of salts in the evaporation of seawater and lakes in closed arid regions. The Marine evaporites are common in regions where the freshwater supply is small, the sea is closed and the climate is arid.

    There are also silica rocks (chert / precipitated silica - flint), phosphorites and ferruginous rocks. As well as oil basins, coal and natural gas, formed by the action of high temperatures and pressures on organic waste.

Which gauge indicates the total number of miles your car has been driven since it was manufactured?

A. The speedometer
B. The tachometer
C. The odometer
D. The fuel gauge

Answers

It's C. The odometer

Most of the pulling force that drives plate motion is produced ____________.

Answers

Hello :)

Most of the pulling force that drives plate motion is produced ____________.

Most of the pulling force that drives plate motion is produced at mid- ocean ridges.

Hope I helped!
Final answer:

The driving force behind plate tectonics is primarily the result of gravitational force. This force pulls a dense, sinking oceanic plate down into the mantle, driving other parts of the same plate and neighboring plates.

Explanation:

Most of the pulling force that drives plate motion is produced mainly by the action of gravity. The gravity forces initiate the movement of plates in a process called slab pull which is considered as the major plate-driving force. Here, gravity pulls a dense oceanic plate down into the mantle at a subduction zone. This action contributes to the movement of other parts of the same plate and neighboring plates.

The slab pull force is proportional to the area of the plate that is sinking into the mantle, and inversely proportional to the distance between the plates, which acts like a lever arm. In physics concept, the magnitude of gravitational force is defined by a formula F=(G*m1*m2/r²), where G is the gravitational constant, m1 and m2 are the masses of the objects, and r is the distance between the centers of the two objects.

Learn more about Plate Tectonics:

https://brainly.com/question/4560431

#SPJ2

What is the effect of high temperature and high pressure water on the melting temperature of most rocks?

Answers

The water would keep the magma at the same temperature restricting it from getting hotter keeping the temperature at melting point but not enough to turn into a flowing liquid

The water would maintain the magma's temperature by preventing it from rising over melting point and preventing it from becoming hot enough to flow.

What is melting ?

A physical process called melting or fusing causes a substance to change its phase from a solid to a liquid. This happens when the solid's internal energy rises, usually as a result of heat or pressure being applied, which raises the substance's temperature to the melting point.

A substance can go through five stages of melting: moistening, sintering, collapsing, meniscus, and clear point.

As it sinks deeper, the rock becomes hotter and hotter due to changes in the earth's crust. A rock must be heated to between 600 and 1,300 degrees Celsius (1,100 and 2,400 degrees Fahrenheit) in order to melt and become magma (molten rock).

To learn more about melting

https://brainly.com/question/12499685

#SPJ5

How does transportation in cities differ from transportation in the country?

Answers

In country sides, the terrain is Mainly what I would call Rough, in cities The terrain is Smooth/Flat. The main point is that Transportation in cities is smoother but more conjected, But transportation in the country is rougher but more loose

conduct a survey of about 25 households in your locality to find out whether they have migrated to their present place of residence.

Answers

You have to actually conduct a survey, but I did migrate to my current place of residence.

What type of map shows landforms water and features of a place?

Answers

Physical maps show different geographical features, bodies of water, and land forms.

Which two industries are mainstays in the Maldives? A. Fishing and tourism B. Technology and manufacturing C. Farming and textiles D. Tourism and farming

Answers

Maldives is known for its pristine beaches with its blue waters and fine white sand. It is a common getaway vacation especially for rich celebrities. 

Maldives is a group of islands in South Asia, particularly part of the Indian Ocean. Being a tiny archipelago, its booming industries would have to be fishing and tourism as they take advantage of the country's rich resources. In fact, 28% of Maldives' GDP comes from tourism. In contrast, Maldives has limited area for agriculture so it only plays a minor role in the country's economy.

What is the name for any side of a building that is intended to be looked at?

Answers

Final answer:

A façade is the term for any side of a building that is intended to be looked at. It's usually designed to be visually striking and is often the most important part of a building's architecture.

Explanation:

The term for any side of a building that is intended to be looked at is called a façade. Architecturally, a façade is often the most important aspect of a building as it sets the overall tone and style. Façades can be designed according to various architectural styles, and can be adorned with different materials, decorations, and colors. It's often the most visually striking aspect of the structure, designed to attract and impress viewers.

Learn more about façade here:

https://brainly.com/question/12465938

#SPJ12

originally, APEC (Asian-Pacific Economic Cooperation) was formed to foster free trade and investment, but later added _______ to their agenda

Answers

APEC later added SECURITY AND TERRORISM to their agenda. APEC is a forum that is made up of twenty one member countries that was established in 1989.Their principal objective is to promote free  trade throughout the Asia - Pacific region. Later on, APEC added security and terrorism to the list of their major objectives.

Tides are a type of wave caused by what type of natural force between the oceanâs water and the moon?

Answers

Tides are a type of wave caused by what type of natural force between the oceanâs water and the moon?

Answer: Gravitational Pull

Tides are a type of wave caused by Gravitational force between the ocean water and the moon.

Hence, the correct answer is option a.

Tides are rhythmic oscillations in sea levels caused primarily by the gravitational interaction between the Earth, the Moon, and to a lesser extent, the Sun. The Moon's gravitational pull exerts a stronger force on the side of the Earth facing it, resulting in a bulge of water, creating the high tide.

On the opposite side of the Earth, a second high tide occurs due to the centrifugal force caused by the Earth and Moon's orbital motion. The areas between these bulges experience low tide. As the Earth rotates, locations experience two high and two low tides daily. When the Sun aligns with the Moon during full and new moon phases, the gravitational effect enhances tides, leading to spring tides, while during the quarter moons, neap tides occur with reduced tidal range.

Know more about Tides here:

https://brainly.com/question/29417771

#SPJ2

The given question is incomplete. Hence, the complete question is:

Tides are a type of wave caused by what type of natural force between the ocean water and the moon?

a. Gravitational force

b. Coriolis force

c. Electromagnetic force

d. None of these.

At a divergent boundary, what is the relative motion of the plates on each side of the boundary?

Answers

At a divergent boundary, the plates on each side of the boundary move away from each other, often leading to creation of new crust due to volcanic activity and formation of deep under-ocean trenches.

At a divergent boundary, the plates on each side of the boundary move away from each other. This motion is caused by the underlying asthenosphere which rises and pushes the overlying lithospheric plates apart. These boundaries are usually associated with seafloor spreading centres or mid-ocean ridges. An example is the Mid-Atlantic Ridge which separates the North American and Eurasian Plates. The relative movement of the plates results in the creation of new crust due to volcanic activity and often forms deep under-ocean trenches.

Learn more about Divergent Boundary here:

https://brainly.com/question/38192856

#SPJ12

At a divergent boundary, the relative motion of the tectonic plates on each side of the boundary is pulling apart or moving away from each other.

This type of plate boundary is characterized by the separation of lithospheric plates. As the plates move apart, they create a gap or rift, which can lead to the formation of new crust through volcanic activity and the upwelling of molten rock from the mantle.Divergent boundaries are often found along mid-ocean ridges, where oceanic plates are moving away from each other, creating new oceanic crust. These boundaries can also be found on continents, leading to the formation of rift valleys where continental plates are pulling apart. An example of a continental divergent boundary is the East African Rift.The motion of the plates at divergent boundaries is a fundamental part of the theory of plate tectonics, and it plays a crucial role in shaping the Earth's surface and geological features.Plates Move Apart: The key characteristic of a divergent boundary is that the tectonic plates on either side of the boundary move away from each other. This motion is primarily horizontal, and it results in the plates pulling apart.Creation of New Crust: As the plates separate, it creates a gap or rift in the Earth's crust. In the case of oceanic plates, as they move apart, magma from the mantle rises to fill the gap, solidifying to form new oceanic crust. This process is responsible for the formation of mid-ocean ridges, which are underwater mountain ranges created by the continuous addition of new crust.Rift Valleys on Continents: Divergent boundaries can also occur on continents, leading to the formation of rift valleys. Here, the continent is gradually splitting apart, and over time, this can result in the creation of new ocean basins if the rifting continues. An example of a continental divergent boundary is the East African Rift, where the African Plate is splitting into two, potentially forming a new ocean in millions of years.

Learn more about molten:

https://brainly.com/question/27335589

#SPJ12

Can a good geologist ever find a material that is somewhere between sedimentary rock and metamorphic rock?

Answers

Yes because squeezing and heating sedimentary rock makes metamorphicrock and intermidiates exist

Answer:

Can be found. because all types of rocks that arise from the rock cycle on the surface of the earth.

Explanation:

In the geological cycle it is explained that rocks undergo changes in 4 phases namely

1. Magma

2. Frozen rock s

3. Sedimentary rocks

4. Metamorphic rocks, and then back again to magma.

But it does not rule out the possibility that rocks that are in the igneous phase will immediately become metamorphic rocks or even directly become magma again. It is also possible that sedimentary rocks have directly become magma or igneous rocks have become metamorphic. All conditions depend on the process through.

For sedimentary rocks to be metamorphic rocks that are usually under the surface of the earth. Intrusive igneous rocks are also under the earth's surface. When the rock that is beneath the surface of the earth is not exposed to the surface of the earth during the lifting process, the rock will be buried even deeper. The deeper buried, the more likely it is to be exposed to temperature and also the high pressure generated by tectonic compression and thermal energy emanating from the earth, which in turn can change these rocks. Rocks that have changed below the surface of the earth due to exposure to temperature, pressure, and also contact with magma are called metamorphic rocks.

Learn More

Similarities between sills and lapoliths https://brainly.com/question/12697997#

Keywords

- Sedimentary Rocks

- Metamorphic Rocks

Does the US values get exported to the peripheral nations?

Answers

Immanuel Wallerstein explained this relationship as developed World Systems Theory. The system consists of three levels. First is the main core country which dominates and has control of the other two levels. The second is semi periphery, which is both a core and peripheral (dependent on capital and products to the core). The last is a dependent country to the core, peripheral.

The US is a core country that has assets in terms of capital and product that it extends to peripheral nations. In a way, it gains control over peripheral because of its economic dominance. This makes the US have an edge to the raw materials and skilled labor of the peripherals

What type of rock comprises most of the exposed surface of earth (75%)?

Answers

Final answer:

Sedimentary rocks make up most of the Earth's surface, largely due to processes such as erosion and deposition. Oceanic crust is composed largely of basalt, while continental crust features granite. These rocks are crucial for supplying essential minerals and maintaining sustainability.

Explanation:

The type of rock that comprises most of the exposed surface of Earth (around 75%) is sedimentary rock. These rocks are generally formed from the compaction and cementation of various sediments and are a significant component of the Earth's crust. Terrestrial rocks can be classified as igneous, sedimentary, or metamorphic, with sedimentary rocks being predominant on the surface due to processes like erosion and deposition. Earth's crust is largely composed of chemical compounds of oxygen and silicon, with aluminum, iron, carbon, sulfur, and other elements also present.

When focusing on the oceanic crust, it consists mostly of volcanic rocks known as basalt, while the continental crust is composed predominantly of granite. Both oceanic and continental crust have densities of about 3 g/cm³ and form a significant part of the lithosphere. Proper management of these rock resources is crucial for sustainability due to their role in supplying essential minerals for various applications, including agriculture.

What can't contour lines cross

Answers

The answer to this question is:

What can't contour lines cross?.✔️ "Can't have two different elevations at the same point"

Hoped This HelpedEssencebritt33 
Your Welcome :)

Where does the oblateness of earth occur?

Answers

Hello :)

Where does the oblateness of earth occur?

The oblateness of earth occurs at the poles.

Hope I helped!

At which type of tectonic setting would you expect the development of shield volcanoes?

Answers

Salutations!

At which type of tectonic setting would you expect the development of shield volcanoes?

Mantle plumes are the type of tectonic setting you would expect the development of shield volcanoes.

Hope I helped!

Shield volcanoes are expected to form in tectonic environments such as mantle plumes.

What is Sheild Volcano ?

Anywhere that flowing low-silica lava touches a stony planet's surface is where shield volcanoes can be discovered. They are particularly typical of ocean island volcanism connected to hot areas or continental rift volcanism, though.

In reference to its low profile, which resembles a warrior's shield resting on the ground, a shield volcano is a particular form of volcano. It is created by the eruption of lava that is very fluid (low viscosity), travelling further and forming thinner flows than lava that is released from a stratovolcano, which is more viscous. The shield volcano's characteristic shape is created by the slow deposition of wide sheets of lava brought on by repeated eruptions.

There are shield volcanoes everywhere there is flowing low-silica lava.reaches the rocky planet's surface. They are particularly typical of ocean island volcanism connected to hot areas or continental rift volcanism, though.

Learn more about Sheild Volcano here

https://brainly.com/question/29975974

#SPJ6

What is the discharge of water moved by a river that has an area of 750m and is traveling 4 m/s? 300 m/s 3000 m/s 750 m/s 4500 m/s

Answers

Assuming the 750 m² is the river's cross section, and not some random surface measurement, the discharge is simply the product 750 * 4 = 3000 m³/s
Other Questions
Which of the following quantities is a vector in character?electric fieldelectric chargeelectric energyelectric potential difference please help! really appreciate it A car traveling at speed of 24 m/s comes to stop at the red light how much time will it take for the car to stop if its acceleration is -8.0 M/S2 Which of the following is NOT a function of mycorrhizae? a. assemble amino acidsb. increase water and mineral uptakec. break down organic materialsd. none of the above A client is experiencing muscle weakness and an ataxic gait. the client has a diagnosis of multiple sclerosis (ms). based on these symptoms, the nurse formulates impaired physical mobility as one of the nursing diagnoses applicable to the client. what nursing intervention should be most appropriate to address the nursing diagnosis What is the volume of the prism? 192 cubic units 200 cubic units 384 cubic units 400 cubic units Which part of the ear is most likely to be damaged by loud noises? If a point is equidistant from the two sides of an angle, then it is: A.on the perpendicular bisector. B.the vertex of the angle. C.on the angle bisector. D.on one side of the angle. A number minus 25 is equal 51 a rectangle has an area of 12m and a width of 400cm. what is the length? Of delegates to the Constitutional Convention in Philadelphia, which was not a supporter of the new Constitution? How does land availability negatively impact industrialization in Chinas manufacturing and factories, further reducing the amount of land available for farming? There are not enough young men available to develop the land in China China is not pursuing industrialization due to a focus on technology China is outsourcing its agricultural needs that require additional land None of the above What was one result of the creation of the interstate highway system? A. Plane travel dropped dramatically. B. More Americans moved into the inner cities. C. Local roads were no longer being built. D. More Americans were now able to move to the suburbs The Ayurveda is a Hindu book of knowledge that Find the area of the helicoid (or spiral ramp) with vector equation r(u, v) = ucos(v) i + usin(v) j + v k, 0 u 1, 0 v 9. Which of these singular nouns has an irregular plural noun?A. HouseB. Chimney C. BearD. Foot How to write two different pairs of decimals whose sums are 14.1. One pair should involve regrouping simplify this expression x^8 y^-26 What are two activities that allowed enslaved Africans in America to preserve some of their culture? hunting riding singing cooking trading Devise a way to separate a mixture of sand, salt, and iron filings. Write the procedure using a step-by-step method and explain the reasoning behind each step. CAN SOMEONE PLEASE HELP ME??????!!!!!!!!! Steam Workshop Downloader