Explain that argon has 18 protons and 18 electrons. There are 2 electrons on the first energy level, 8 electrons on the second level, and 8 electrons on the third energy level. Good luck!
Answer:
The sublayer that is likely to be filled after the rest of the subshells at a specific energy level will be the "s" layer.
Explanation:
The sublayer that is likely to be filled after the rest of the subcases at a specific energy level will be the "s" layer. This is explained by the Pauling diagram.
Linus Pauling Diagram or Electronic Distribution Diagram is a model that assists in the configuration of the electrons of atoms and ions through energy sublevels. This diagram is based on the energy sublevels of the atom to organize the electrons. These are arranged from lowest to highest energy when the atom is in its ground state. The electrosphere of atoms is formed by 7 (seven) electronic layers, represented by the letters: K, L, M, N, O, P and Q. Each layer allows a maximum number of electrons and each layer has a number of sublevels.
The K layer has only one sublevel (s), which allows up to 2 electrons. This sublayer will likely fill after the rest of the subshells at a specific energy level.
in the reaction C5H8+____ O2= 8H2O+5CO2
Which of the following is the best definition of a scientific theory?Help me plz
Demand decreases and competition increases are factors that cause a shift in the quantity supplied (true or false)
Answer is: true.
Demand decreases and competition increases decrease the quantity supplied.
Quantity supplied is the quantity of a commodity that producers are willing to sell at a particular price at a particular point of time.
Quantity demanded is the quantity of a commodity that people are willing to buy at a particular price at a particular point of time.
Quantity demanded can change at the same price depending upon factors like recession, changes in the taste of the consumer.
Competition is rivalry between two or more economic groups.
why do cells have a plasma membrane
A) SEPARATE PROTEINS FROM NUCLEUS
B) DISTINGUISH PLANTS FROM ANIMALS
C) DEFINE THE SIZE OF THE CELL
D) SEPARATE THE INSIDE OF THE CELL FROM ITS ENVIRONMENT
A separate proteins from nucleus
What’s the name of this element and what is the reactivity?
Which of these actions would decrease heat transfer between two objects?
increasing the temperature of the warmer object
increasing the area of their contact
reducing the thermal energy of the cooler object
reducing the time of their contact
Answer: Reducing the time of contact between the two objects will decrease the heat transfer between them.
Explanation:
increasing the temperature of the warmer object will raise its own temperature and hence the heat transfer will increase.increasing the area of contact will also increase the heat transfer because the rate of transfer will increase and the loss to surrounding will decrease.reducing the thermal energy of the cooler object will decrease its own temperature and this will increase the heat transfer to reach the equilibrium temperature.reducing the time of contact between the two objects will decrease the amount of heat transferred between the two objects according to the time that will be in contact.the answer is d you guys and girls i just took it on the test
Which of the following electromagnetic waves carries the most energy?
A) ultraviolet waves
B) infrared waves
C) microwaves
D) visible light
In the electromagnetic spectrum , among the following ultraviolet rays carry the most energy.
What is electromagnetic spectrum?The electromagnetic spectrum consists of electromagnetic radiation which consists of waves made up of electromagnetic field which are capable of propogating through space and carry the radiant electromagnetic energy.
The radiation are composed of electromagnetic waves which are synchronized oscillations of electric and magnetic fields . They are created due to change which is periodic in electric as well as magnetic fields.
In vacuum ,all the electromagnetic waves travel at the same speed that is with the speed of air.The position of an electromagnetic wave in an electromagnetic spectrum is characterized by it's frequency or wavelength.They are emitted by electrically charged particles which undergo acceleration and subsequently interact with other charged particles.
Learn more about electromagnetic spectrum,here:
https://brainly.com/question/15576247
#SPJ5
Final answer:
Ultraviolet waves carry the most energy out of the options provided, as they have a higher frequency than visible light, infrared waves, and microwaves.
Explanation:
The electromagnetic wave that carries the most energy among the options provided is ultraviolet waves (A). The energy of electromagnetic waves is related to their frequency. The higher the frequency, the more energy the waves carry. Ultraviolet waves have higher frequencies than visible light, infrared waves, and microwaves, which means they have more energy. It is important to note that waves like X-rays and gamma rays carry even more energy than ultraviolet waves. The general order from lowest to highest energy in electromagnetic waves is radio, microwave, infrared, visible, ultraviolet, X-ray, and gamma.
Given the following reaction: H2SO4+2LiOH=Li2SO4+2H20, what mass of water is produced from 19 g of sulfuric acid?
Hi,
To solve the question, first of all we will find out the no. of moles of H2SO4 in 19 g of sulfuric acid.
As we know:
No . of moles = Mass/ Molar mass
No. of moles= 19 g/98.08 g
No. of moles= 0.1937
Now we know the no of moles of H2SO4 that will react with 2LiOH. We also know the molar equivalence of H2SO4 , and 2LiOH that will react.
So, the water that will be produced will be 2H2O and 1 Li2SO4 when H2SO4 that will react with 2LiOH.
0.1937 x 2x 18.01
=6.977
=6.98
Therefore, approximately 6.98 grams of water will be produced from 19 g of sulfuric acid.
Hope it helps!
give 2 examples of energy transformation that occur when making toast in a toaster oven
When making toast in toast oven, the following energy transformation occur
a) electric energy is converted to heat energy which heat up the filaments of toaster, which helps in roasting of toast.
b)the heat energy is transferred to bread or toast
When making toast in a toaster oven, energy transformations occur from electrical energy to thermal energy, and from thermal energy to radiant energy.
Explanation:When making toast in a toaster oven, two examples of energy transformation that occur are:
Electrical energy to thermal energy: The electrical energy from the power source is transformed into thermal energy when the toaster oven heats up the heating elements inside.Thermal energy to radiant energy: The thermal energy produced by the heating elements is transformed into radiant energy in the form of infrared radiation, which then heats up the bread slices and transforms them into toast.Learn more about Energy transformations in a toaster oven here:https://brainly.com/question/11751233
#SPJ12
Why is soap used to remove grease
It works because soap is made up of molecules with two very different ends.
Hope this Helps
Soap breaks up the oil (grease) into smaller drops, which can mix with the water. This is why we use soap to clean grease because it break it apart causing it to wash off object clean. Hope this help!!!:)
Which sentence best describes part of the process for generating electricity in a nuclear power plant?
A. Atoms join together to produce water molecules.
B. An atom releases electrons, producing an electric current.
C. Protons and neutrons join together to create atoms.
D. Heat is released when atomic nuclei split.
Answer is: D. Heat is released when atomic nuclei split.
Nuclear fission is a nuclear reaction or a radioactive decay where nucleus of atom split into smaller ligher nuclei.
Nuclear fission is exothermic reaction which release large amounts of energy (electromagnetic radiation or as kinetic energy, which heat reactors where fission reaction take place).
Nuclear energy is the energy found in the nucleus of an atom.
Answer is: D. Heat is released when atomic nuclei split.
Nuclear fission is a nuclear reaction or a radioactive decay where nucleus of atom split into smaller ligher nuclei.
Nuclear fission is exothermic reaction which release large amounts of energy (electromagnetic radiation or as kinetic energy, which heat reactors where fission reaction take place).
Nuclear energy is the energy found in the nucleus of an atom.
What is the energy transformation taking place as a moving roller coaster slowly climbs a steep hill?
Potential energy to kinetic energy
Kinetic energy to potential energy
Radiant energy to chemical energy
Chemical energy to radiant energy
Answer:
The answer will be (B) Kinetic energy to potential energy
Explanation:
When something is in movement, it has kinetic energy. When that object beings to slow down it gains more potential energy than kinetic.
The potential needed to do work is called energy. It can exist in several forms like kinetic, potential, thermal, nuclear etc.
The correct answer is:
option B. Kinetic to potential energy.
This can be explained by the following:
When an article is in motion then the energy the object posses is called kinetic energy.When energy is stored in an article depending on its location is called potential energy.Kinetic and potential energy can get transmuted into each other.Therefore, when a roller coaster slowly climbs a steep hill then the kinetic energy gets transformed into potential energy.
To learn more about kinetic and potential energy refer to the link:
https://brainly.com/question/21288807
is a sodium cation smaller or larger than a sodium atom
A sodium cation is smaller than a sodium atom.
Hopefully this is right...
Which type of eye wash station must be checked and flushed most often
stand up eye wash station
Answer:
The answer is: When a foreign substance, usually irritating, penetrates the eyes, and for people with sensitive eyes.
Explanation:
An eyewash liquid, or eyewash liquid system is a liquid, usually a saline solution, used as an emergency or safety mechanism in laboratories and industrial plants as an aid to eye rinsing, s when a foreign substance, usually irritating, penetrates in them.
These eye drops can be beneficial for people with sensitive eyes and can provide relief from the side effects of painful sensation.
The answer is: When a foreign substance, usually irritating, penetrates the eyes, and for people with sensitive eyes.
What is the maximum number of electrons found in any energy level of the known elements? (Refer to the periodic table.) 112 32 86 92
The answer is 32 electrons.
Answer:
32 electrons are the maximum electrons found in the N shell.
Explanation:
According to the periodic table, Maximum number of electrons in any energy level of known element is 32 which is found in N shell.
Each shell can contain fixed number of electrons. The first shell is the K shell that holds two electrons, the second shell that is L shell which holds eight electrons(2+6), The third shell is M shell which holds 18 electrons(2+6+10), and the fourth shell is N shell which holds the maximum number of electrons that is thirty two(2+6+10+14) electrons. The general formula is [tex]2n^{2}[/tex] electrons.
The outermost shell is called the valence shell and the electrons present in these shell are called valence electrons. Each shell consists of one or more subshells, and each subshell consists of one or more atomic orbitals.
Victoria has a crate of vegetables that weighs 100 newtons. She exerts a force of 100 newtons to lift the crate with a pulley. What’s the mechanical advantage in this situation?
A. less than 1
B. equal to 1
C. equal to 0
D. more than 1
Simply put, MA = Force Out / Force in. That's the way it is usually stated. The force out is normally what you need to move. The force in is what you need to supply to get the force out. Most machines will give you an MA of more than 1. Some (like your arm) will give you less than 1 and others (like this one) will give you exactly one.
This one is frictionless, otherwise it would slip into less than one if it had friction.
Answer B
Answer:
Mechanical advantage in this situation is equal to 1.
Explanation:
The mechanical advantage of a simple machine gives a relationship between the input force applied to the output force. Mathematically, it is given by :
[tex]MA=\dfrac{F_o}{F_i}[/tex]
Where
[tex]F_o\ and\ F_i[/tex] are output force and input force
In this case, the weight of the crate of vegetables is 100 N
Force exerted by her to lift the crate with a pulley is 100 N
The mechanical advantage in this situation is given by :
[tex]MA=\dfrac{100}{100}=1[/tex]
So, the mechanical advantage in this situation is equal to 1. Hence, the correct option is (b) "equal to 1".
Will carbon and hydrogen atoms most likely form an ionic bond or a covalent bond?
In most cases, carbon shares electrons with other atoms (usual valence of 4). This is because carbon typically bonds with elements which have a similar electronegativity. Examples of covalent bonds formed by carbon include carbon-carbon, carbon-hydrogen, and carbon-oxygen bonds
answer is covalent bond because carbon has 4 valence electron and shared them hence it is a covalent bond.
Vito was having a picnic by a lake with his classmates. He threw a rock into the lake and watched i sink His friend, Romeo, threw his apple in the lake and watched it float. What is the best explanation for why the rock sank and the apple floated?
how did james chadwick discover the neuron?
James Chadwick was assigned the task of tracking down evidence of Rutherford's tightly bound "proton-electron pair" or neutron. In 1930 it was discovered that Beryllium, when bombarded by alpha particles, emitted a very energetic stream of radiation. This stream was originally thought to be gamma radiation.
Which two particles can form an ionic bond with each other? A. a negative oxygen ion and a negative chlorine ion B. a positive sodium ion and a positive magnesium ion C. a positive calcium ion and a negative oxygen ion D. a neutral fluorine atom and a negative sulfur ion
A positive calcium ion and a negative oxygen ion can form an ionic bond with each other, as they have opposite charges which attract. Such a pairing would result in the formation of the ionic compound calcium oxide (CaO). Options involving two negatively charged ions or two positively charged ions, as well as a neutral atom paired with a negative ion, do not produce ionic bonds because there is no attractively charged pairing.
An ionic bond is formed when one atom donates an electron to another atom, resulting in the formation of positively charged ions (cations) and negatively charged ions (anions). This type of chemical bond typically occurs between metals, which tend to lose electrons, and non-metals, which tend to gain electrons, leading to a compound with a net zero charge. For particle pairs to form an ionic bond, one must be a positive ion and the other a negative ion.
Looking at the options provided:
A. A negative oxygen ion (anion) and a negative chlorine ion (anion) would both have a negative charge and therefore could not form an ionic bond with each other due to like charges repelling.
B. A positive sodium ion (cation) and a positive magnesium ion (cation) both have positive charges and, like option A, would repel rather than form an ionic bond.
C. A positive calcium ion (Ca2+) and a negative oxygen ion (O2-) have opposite charges and would attract each other to form an ionic bond, resulting in the ionic compound calcium oxide (CaO).
D. A neutral fluorine atom and a negative sulfur ion (anion) also cannot form an ionic bond because the neutral fluorine atom does not have a charge to attract the negatively charged sulfur ion.
Therefore, the correct answer is C: a positive calcium ion and a negative oxygen ion can form an ionic bond with each other, illustrating the transfer of electrons and the electrostatic attraction that characterizes ionic bonding.
what factor distinguishes a metallic bond from an ionic bond or a covalent bond
The answer to this question is:
The mobility of electrons.
Have a Great Day! ! Hope This Helps!
If you have anymore questions, Just ask me!
Mark Brainliest If anyone Else Answers Please to help me get to the next Rank!
#RoadToVituoso!
- Innverted
Answer:
The ionic bond occurs between two different atoms (metal and nonmetal), while the covalent bond occurs between two equal atoms (nonmetals),
Another difference between these is that the covalent bond is an electron compartment, while in the ionic bond there is an electron transfer.
Metal bonding occurs when metals are combined with each other. Metal atoms need to give up electrons to reach the configuration of a noble gas. In this case, the metals lose the valence electrons and an electron cloud forms between the positive nuclei.
Which of the following describes the product of a chemical reaction
I believe the correct answer would be the substances that are formed. Why? Because during a chemical change, the substances (scientifically called reactants) which are changed into other substances are called products.
Hope I could help! :)
A chemical reaction is a series of events that involves the reactants and the products. The product of the reaction is the substances that are formed. Thus, option A is correct.
What are products and reactants?Products are the substances that are formed when the chemical reactants undergo changes in the bond breaking and formation resulting in a new substance in the form of compounds, molecules, or elements. They are formed at the end of the reaction and are on the right side of the equation.
The reactants are the chemical substances that underwent reactional alterations that cause the change in the bonds and the chemical properties causing the formation of the products. They are present at the initial stage of the reaction and are on the left side of the equation.
Therefore, the products are formed at the end of the reaction.
Learn more about products and reactants here:
https://brainly.com/question/13026440
#SPJ5
Your question is incomplete, but most probably your full question was, Which of the following describes the products of a chemical reaction?
A.The substances that are formed
B.The substances that are changed
C.The starting materials
D.The chemical ingredients
What determines the average kinetic energy of the particles in a gas? A. the number of collisions B. the number of particles C. the size of the particles D. the temperature
Answer:
The correct answer is
D. the temperature
Explanation:
According to the forces of attraction,the average kinetic energy of the particles in a gas is determined by the temperature.
Forces of attraction is a force by which atoms in a molecule combine. it is basically an attractive force in nature. It can act between an ion and an atom as well.It varies for different states of matter that is solids, liquids and gases.
The forces of attraction are maximum in solids as the molecules present in solid are tightly held while it is minimum in gases as the molecules are far apart . The forces of attraction in liquids is intermediate of solids and gases.
As the forces of attraction are least in gases they have maximum average kinetic energy which is further increased by an increase in temperature.
Learn more about forces of attraction,here:
https://brainly.com/question/32820512
#SPJ4
what is our ultimate source of energy on earth
what is our ultimate source of energy on earth
The sun is our ultimate source of energy, silly!
The ultimate source of energy on Earth is the sun, which powers life and processes through nuclear fusion. Its energy supports photosynthesis and is stored in fossil fuels, while modern solar technology enables us to harness this energy directly.
Explanation:The ultimate source of energy on Earth is the sun. This massive celestial body fuels virtually all processes and life forms on our planet. Through a process called nuclear fusion, the sun converts hydrogen into helium, releasing vast amounts of energy that travel to Earth as sunlight. This energy is critical for photosynthesis, the process by which plants produce food, thereby supporting the food chain and various ecosystems. Besides, the sun's energy is stored in fossil fuels like coal and petroleum, which are remnants of ancient plants and animals.
Although these fossil fuel resources are finite and will eventually deplete, the sun represents an essentially unlimited supply of energy. Modern solar technology, including photovoltaic cells, harnesses this sunlight directly to produce electricity, offering a renewable and sustainable alternative to fossil fuels. Solar energy's challenge lies in efficiently capturing and converting it to meet global energy demands.
A repetition of properties occurs when elements are arranged in order of increasing atomic number.
This is known as modern periodic law
According to this repetition of properties occurs when elements are arranged in order of increasing atomic number.
This law was proposed by Mendleev.
Previously the periodic law was that the properties are repeated with atomic mass.
The periodic law, which emerged in the 20th century, suggests that properties of elements repeat periodically when arranged by their atomic numbers. This is depicted in the periodic table, where elements are ordered by their atomic numbers in rows and columns, grouping elements with similar properties. The periodic table thus facilitates the prediction of element behavior.
Explanation:The repetition of properties in elements, when arranged in order of increasing atomic number, is best described by the periodic law. This law states that the properties of elements are periodic functions of their atomic numbers. The periodic table, where this law is visibly demonstrated, organizes elements in increasing order of their atomic numbers in horizontal rows (periods) and vertical columns (groups).
Atoms with similar properties within this table are grouped in the same column. Each atomic box typically contains the element's symbol, atomic number, average atomic mass, and possibly its name. The periodic mapping of elements through atomic numbers rather than atomic masses emerged in the twentieth century and its modern version is widely accepted across the world today.
Since the periodic table's organization is based on shared properties among elements, it provides an efficient system for predicting the behavior of an element. Therefore, it becomes simpler to understand why elements in the same group have similar characteristics, for instance, why the metallic character increases as we move down a group.
Learn more about Periodic Law here:https://brainly.com/question/35876837
#SPJ3
Does the length of the carbon chain affect the boiling point of alkanes? If so, how? provide evidence to support your answer? (b) If the chain contains a functional group, would you make the same conclusion? Again provide evidence.
Yes. B.p. tend to increase with the number of carbon atoms in the backbone.
ExplanationStraight-chain alkanes have the general molecular formula C[tex]_n[/tex]H[tex]_{2n+2}[/tex]. Adding carbon atoms to the chain increases the number of electrons in each molecules.
Alkane molecules are not polar without any functional groups. The only possible force between them is London Dispersion Force (a.k.a. induced dipole). Electrons shift within molecules to create instantaneous dipole in this type of force.
Molecules with a large number of electrons experience the most significant shift. London Dispersion Force is strongest in those molecules. They shall have the highest boiling points.
Examples: (SynQuest)
C₂H₆ (ethane)- b.p. -88 °CC₄H₁₀ (butane)- b.p. -1 °C ~ 1 °CC₆H₁₄ (hexane)- b.p. 68 °C ~ 70 °C(b)The conclusion in (a) likely holds molecules in the same homologous series.
ExplanationMolecules in the same homologous series have the same types and numbers of functional groups. However, they differ only in the number of repeating units (-CH₂ in this case) that they contains. The number of such units in each molecule is directly related to the length of its carbon backbone.
Functional groups introduce extra types of forces between the molecules. For instance:
Halogens, e.g., Cl, forms polar bonds with carbon. In most cases they make the molecule polar enough to form dipole-dipole interactions.Hydroxyl groups -OH can lead to hydrogen bonds between the molecules.Functional groups tend to have similar effects on the b.p. in the same homologous series. The extra interaction due to the functional groups stays generally the same. Trends in the strength of dispersion forces likely follow the reasoning in (a). There shall be a similar conclusion. Molecules with the longest backbone in the same homologous series would have the highest b.p.
Example: (FooDB)
CH₃COOH (ethanoic acid)- b.p. 118 °CC₂H₅COOH (butanoic acid)- b.p. 163.5 °CC₃H₇COOH (hexanoic acid)- b.p. 205 °CNote, that it's only the number of repeating units in the carbon backbone that differs. Functional groups shall be on the similar positions on members of the series. For instance, 1,1-dichloroethane Cl₂-CH-CH₃ and 1,1-dichloropropane Cl₂-CH-CH₂-CH₃ are on the same series; whereas 1,3-dichloropropane Cl-CH₂-CH₂-CH₂-Cl is not.
A bald eagle's average speed is about 50 km/h. About how long would it take an eagle to fly 1 kilometer? A. 1 second B. 1 minute C. 1 hour D. 1 day
If a bald eagle flies at 50 km/h, then it would take about 1.2 minutes to fly 1 kilometer. Therefore, the closest answer is B. 1 minute.
Explanation:If an eagle flies at an average speed of 50 km/h, it means that in 1 hour, the eagle would cover 50 kilometers. To find out how long it would take the eagle to fly 1 kilometer, we have to divide the total time for its average (1 hour, or 60 minutes) by the total distance it can cover (50 kilometers).
So, 60 minutes divided by 50 kilometers equals 1.2 minutes. Thus, it would take the eagle approximately 1.2 minutes to fly 1 kilometer. Therefore, the answer is B. 1 minute (rounded off).
Learn more about Calculating Time here:https://brainly.com/question/20416068
#SPJ3
how to distinguish a solution of sodium sulphite from a solution of sodium sulphate in the lab
We have to distinguish a solution of sodium sulphite from a solution of sodium sulphate in the laboratory.
Solution of sodium sulphite is acidified with dilute HCl and to that when few drops of barium chloride (BaCl₂) solution is added, white precipitate is formed. The white precipitate is soluble in HCl.
To this solution 2 drops of iodine (I₂) solution is added and brown colour of iodine is discharged as I₂ gets reduced to HI.
The reactions involved in case of sodium sulphite is are:
Na₂SO₃ + BaCl₂ = BaSO₃ ↓ + 2NaCl
(white precipitate)
BaSO₃ + 2HCl = BaCl₂ + H₂SO₃
H₂SO₃ + I₂ + H₂O = H₂SO₄ + 2HI
On the other hand, solution of sodium sulphate is acidified with dilute HCl and to that when few drops of barium chloride (BaCl₂) solution is added, white precipitate is formed. The white precipitate of BaSO₄ is formed which is insoluble in HCl.
Na₂SO₄+ BaCl₂ = BaSO₄ ↓ + 2NaCl
(white precipitate)
Lithium and nitrogen react in a combination reaction to produce lithium nitride: 6Li (s) + N2 (g) → 2Li3N (s) In a particular experiment, 4.00-g samples of each reagent are reacted. The theoretical yield of lithium nitride is ________ g.
Answer: 6.71 g
Explanation: [tex]6Li(s)+N_2(g)\rightarrow 2Li_3N[/tex]
[tex]{\text{no of moles}}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex]
[tex]{\text {moles of lithium}}=\frac{4g}{6.914g/mol}=0.578moles[/tex]
[tex]\text{moles of nitrogen}=\frac{4g}{28g/mol}=0.143moles[/tex]
Limiting reagent is the reagent which limits the formation of product. Excess reagent is one which is in excess and thus remains unreacted.
Thus lithium is the limiting reagent and nitrogen is the excess reagent.
As can be seen from the balanced chemical equation, 6 moles of lithium reacts with 1 mole of nitrogen to give 2 moles of lithium nitride.
Thus 0.578 moles of lithium react with 0.096 moles of nitrogen.
6 moles of lithium give = 2 moles of lithium nitride
Thus 0.578 moles of lithium give=[tex]\frac{2}{6}\times {0.578}=0.19moles[/tex] of lithium nitride.
Mass of lithium nitride [tex]Li_3N={\text {no of moles}}\times {\text {Molecular mass}}[/tex]
Mass of lithium nitride[tex]Li_3N[/tex]=[tex]{0.192moles}\times {34.83g/mol}=6.71g[/tex]
Answer: 4.02
Explanation:
-- 4.00 g Li x 1 mol Li x 2 mol LiN x 20.948 g LiN = 4.02 g LiN
-------------- ---------------- ---------------------
6.941 g Li 6 mol Li 1 mol LiN
-- 4.00 g N2 x 1 mol N2 x 2 mol LiN x 20.948 g LiN = 5.98 g LiN
-------------- ---------------- ---------------------
28.014 g N2 1 mol N2 1 mol LiN
what is the weighted-average mass of all known isotopes for an element
Atomic mass of an element is the weighted average.