Gas is the state of matter that can most easily undergo changes in volume. The freely moving particles of gas adapt to take up the entire volume and shape of any container it is kept in.
Explanation:The state of matter that undergoes changes in volume most easily is gas. This is because gaseous substances have the most dispersed particles among the three fundamental states of matter (solids, liquids, and gases). These particles move freely, occupying the complete shape and volume of the container in which they are kept. Thus, any change in the container's size will in-turn affect the volume of the gas. For instance, if we inflate a balloon with gas and then deflate it, the gas volume adjusts in line with the balloon's volume changes.
Learn more about State of Matter
https://brainly.com/question/31659891
#SPJ6
While heating copper in the final step, the bright copper color changes to dull brown. Will percent recovery be too high, too low, or unaffected? Explain your answer
What is the angle between the carbon-sulfur bond and the carbon-nitrogen bond in the thiocyanate ( SCN− ) ion?
Answer:
Angle between the carbon-sulfur bond and the carbon-nitrogen bond in the thiocyanate ion[tex]SCN^-[/tex] is 180°.
Explanation:
The hybridization of carbon atom is sp hybridized. The shape of the sp hybridized carbon is linear which means that angle between sulfur carbon a bond and carbon nitrogen bond is 180 °.
Where as [tex]sp^3[/tex] hybridized carbon has tetrahedral shape with an angle of 109.5°.
Where as [tex]sp^2[/tex] hybridized carbon has trigonal planar with an angle of 120°.
Which of the following reactions shows that the rate of the appearance of D is twice the disappearance of A and one third the disappearance of B?
Suppose a lab group reports a percent yield of sand of 105%. Is it really possible to collect more sand than was originally present? What is a possible explanation for the “extra” product? Do not consider calculation mistakes; think about the procedure used.
True or false the si in sih4 does not follow the octet rule because hydrogen is in an unusual oxidation stat
Final answer:
The claim that Si in SiH₄ does not follow the octet rule due to an unusual oxidation state of hydrogen is false; both silicon and hydrogen follow their expected oxidation states and the octet rule is satisfied for silicon.
Explanation:
The statement “The Si in SiH₄ does not follow the octet rule because hydrogen is in an unusual oxidation state” is false. In the molecule SiH₄, silicon follows the octet rule as it is surrounded by four hydrogen atoms (each providing one electron for bonding), resulting in silicon having eight electrons in its valence shell.
The oxidation state of hydrogen in this compound is +1, which is the usual oxidation state for hydrogen when it is bonded to nonmetals. Hence, the silicon atom in silane (SiH₄) completes its octet by forming four single bonds with four hydrogen atoms, with no need for lone pairs on the hydrogen atoms since hydrogen's valence shell is full with just two electrons.
In summary, SiH₄ is a molecule where both silicon and hydrogen atoms follow common oxidation states of +4 and +1, respectively, and the octet rule is satisfied for the silicon atom.
how do plate tectonics relate to the formation of crustal features on the earth
A sample of a pure compound containing C, H, and N, weighing 1.00 g, yields 2.84 g of carbon dioxide and 0.677 g of water when it reacts with excess oxygen. What is the simplest formula of the compound?
The ester below can be separated into phenol and an acetate salt, via saponification: heating the ester with a strong base, such as sodium hydroxide, will produce phenol and sodium acetate. the two chemicals can then be separated by heat and filtration.
a. calculate the unsaturation number of the ester above.
b. calculate the molecular weight of the ester above
Which of these statements about enzymes is true?
a.) enzymes increase the rate of a reaction by decreasing the gibbs free energy change of the reaction.
b.) enzymes decrease the rate of a reaction by increasing the gibbs free energy change of the reaction.
c.) enzymes increase the rate of a reaction by decreasing the activation energy of the reaction.
d.) enzymes increase the rate of a reaction by decreasing the activation energy of the reaction and the gibbs free energy change of the reaction.
e.) enzymes do not change the rate of a reaction?
Enzymes increase the rate of a reaction by decreasing the activation energy required for the reaction but do not change the Gibbs free energy change of the reaction. Option C is correct.
Among the statements about enzymes, the true one is that enzymes increase the rate of a reaction by decreasing the activation energy of the reaction. Enzymes are biological catalysts that specifically bind to substrates and help convert them to products more efficiently by lowering the energetic barrier, which is the activation energy required for the reaction to proceed.
However, it is important to note that while enzymes do lower the activation energy, they do not alter the Gibbs free energy change (AG) of the reaction. The Gibbs free energy change is a thermodynamic property that determines the spontaneity of a reaction and remains unchanged regardless of whether enzymes are present.
Hence, C. is the correct option.
What is the formula weight of magnesium nitrate, mg(no3)2? express your answer to four significant figures and include the appropriate units?
The formula weight of a compound is simply equal to the total molar mass.
The molar mass of each elements are:
Mg = 24.305 g/mol
N = 14.0067 g/mol
O = 15.999 g/mol
So the total molar mass is:
formula weight = 24.305 + 2 (14.0067) + 6 (15.999)
formula weight = 148.3 g/mol
Final answer:
The formula weight of magnesium nitrate, Mg(NO3)2, is 148.341 g/mol when calculated using the atomic weights of magnesium, nitrogen, and oxygen and summing them up according to the numbers of atoms in the compound.
Explanation:
The formula weight of magnesium nitrate, Mg(NO3)2, is calculated by adding together the atomic weights of all the atoms in the compound.
The atomic weight of magnesium (Mg) is 24.305 g/mol, nitrogen (N) is 14.007 g/mol, and oxygen (O) is 15.999 g/mol. Given that there are two nitrate groups, we multiply the weights of nitrogen and oxygen accordingly.
Multiply the atomic masses with the number of atoms: 1x24.305 g/mol Mg, 2x14.007 g/mol N, 6x15.999 g/mol O.Add all the numbers from step one:Therefore, the formula weight of magnesium nitrate is 148.341 g/mol, expressed to four significant figures with the appropriate units (g/mol).
how do the characteristics of electron microscopes make them studying cells
Scoring scheme: 3-3-2-1 using the ion concentration values in cells #3 & #5 in the expression, ecell#5 - ecell#3 = -(0.0257/2)ln{([fe2+(cell#5)]2[fe3+(cell#3)]2)/([fe3+(cell #5)]2[fe2+(cell#3)]2)}, calculate the theoretical cell voltage difference between cells #5 and #3.
Inside the framework of electrochemistry, the Nernst equation is used to calculate the theoretical cell voltage difference. The Nernst equation shows the variation of cell potential from its standard state and uses the ion concentration values of cell #5 and cell #3.
Explanation:The calculation of the theoretical cell voltage difference between cells #5 and #3 can be understood within the context of electrochemistry where the Nernst equation becomes a cornerstone.
The Nernst equation, written as Ecell = Ecell - (0.0257/n)*logQ, explains the variations in redox potentials (cell potentials) from the standard state values, where n denotes the number of electrons transferred, and Q represents the reaction quotient. This equation is used in practice to calculate Ecell, the potential of a redox system, which differs from its standard state value.
First, you'll need to know the ion concentration values for cells #3 and #5. Then, input those values into the expression. After computing, the resulting value represents the theoretical cell voltage difference between cells #5 and #3.
Learn more about Cell Potential here:https://brainly.com/question/31975412
#SPJ2
Which outcome makes lipids different from other organic compounds? A. They make simple sugars. B. They are made of amino acids. C. They carry information and guard against invasion. D. They don't dissolve in water. \
A chemist dissolves of pure barium hydroxide in enough water to make up of solution. calculate the ph of the solution. (the temperature of the solution is .) be sure your answer has the correct number of significant digits.
The pH of a 4.5 × 10^-4 M Ba(OH)2 solution is calculated by first determining the hydroxide ion concentration, which is doubled due to the two hydroxide ions provided by Ba(OH)2, and then calculating the pOH followed by subtracting from 14 to get the pH value of approximately 10.95.
Explanation:Calculating the pH of Barium Hydroxide Solution
For the calculation of the pH of a 4.5 × 10-4 M barium hydroxide (Ba(OH)2) solution, it is crucial to consider that barium hydroxide is a strong base which dissociates fully in water. As Ba(OH)2 provides two moles of hydroxide ions for each mole of the substance dissolved, the hydroxide ion concentration will be twice the concentration of Ba(OH)2, which is 9 × 10-4 M (2 × 4.5 × 10-4 M).
To find the pOH of the solution, we take the negative logarithm of the hydroxide ion concentration: pOH = -log (9 × 10-4) = 3.045757491. To find the pH, subtract the pOH from 14: pH = 14 - 3.045757491, which simplifies to approximately pH = 10.95. This is a basic solution, as expected from barium hydroxide.
In laboratory settings, remember to use proper safety precautions, the correct form of chemicals, accurate measuring tools, and the appropriate methods to adjust the pH of solutions, such as adding acid or base. Moreover, for precise results, correctly label solutions and calibrate equipment such as pH meters as necessary.
~Hey guys, can somebody answer this for me, thanks :) ~
The average distance between Earth and Mars is about 2.08*10^8 km. How long would it take to transmit television pictures from Mars to Earth?
The time required by an electromagnetic wave having a speed equal to that of light to travel a distance of 2.08 × 10⁸ km is 693. 3 seconds.
What is transmission of waves?Transmission of wave is the movement of waves from one medium to the other. Waves are the propagation of energy or matter. Waves are associated with certain wavelength and frequency.
The speed of an electromagnetic wave is equal to the speed of light, that is 3 × 10⁵ m/s. The time taken by a wave to cover a distance is dependant on the distance and air resistance.
It is given that the distance between moon and earth is 2.08 × 10⁸ km. The speed of light energy is 3 × 10⁵ m/s. Thus the time to cover this distance is calculated as follows:
Time = distance / speed
= 2.08 × 10⁸ km / 3 × 10⁵ m/s
= 693.3 seconds.
Hence, the television pictures from mars will take 693.3 seconds to reach earth.
To find more about electromagnetic waves, refer the link below:
https://brainly.com/question/3101711
#SPJ2
A teacher did an experiment to show the movement of particles in solids, liquids, and gases. The experimental set-up is shown below: An inverted glass jar is shown. Small circles representing foam balls are shown inside the jar. A stretched balloon is shown tied at the mouth of the jar. A string is shown drawn out from the middle of the stretched balloon. A hand is shown pulling the drawn out string. The teacher pulled the string attached to the stretched balloon, first slowly, then fast, and finally vigorously. Which of the following is most likely correct about the pulling of the string and the corresponding state of matter being represented? Gas is represented when pulled fast, solid when pulled slowly, liquid when pulled vigorously. Gas is represented when pulled slowly, liquid when pulled fast, solid when pulled vigorously. Solid is represented when pulled slowly, liquid when pulled fast, gas when pulled vigorously. Solid is represented when pulled vigorously, liquid when pulled fast, gas when pulled slowly.
Answer is: Solid is represented when pulled slowly, liquid when pulled fast, gas when pulled vigorously.
For example, nitrogen molecules have weakest intermolecular bonds in gas phase and move fast and without order.
Cooling is change from liquids to solids. In solid state (for example ice) movement of molecules is more slow than movement of molecules in liquids (for example water).
In solid, molecules are closely packed, stiff and do not changes of shape or volume. Solid object (for example iron) does not take on the shape of its container.
Liquids have definite volume, but no fixed shape.
Gases (for example nitrogen and neon) not have definite volume and fixed shape, it depends on its container.
Answer:
Solid is represented when pulled slowly, liquid when pulled fast, gas when pulled vigorously.
Explanation:
Hello,
The three states of matter could be distinguished via their molecular both arrangement and movement, in such a way, solids have an organized assembly of molecules that slightly and slowly move with respect to their equilibrium position, that is why the solid is represented when the string is pulled slowly, besides of their well-defined shape.
Secondly, liquids have a widespread longer distance between molecules and faster molecular movements which cause the liquid to have an indefinite shape, thus, the liquid is represented when the string is pulled fast.
Finally, the molecular arrangement in gases is "messy" as long as the molecules are in constant rapid motion causing both the crashing to each other and the indefiniteness of their shape. In such a way the gas is represented when the string is pulled vigorously.
Best regards.
A gas mixture is made by combining 8.2 g each of ar, ne, and an unknown diatomic gas. at stp, the mixture occupies a volume of 19.44 l.what is the molar mass of the unknown gas
If the formula for a compound is represented by X2Y3 and the charge on the Y ion is -2, what is the charge in the X ion?
A ball with a mass of 0.5 kilograms is lifted to a height of 2.0 meters and dropped. It bounces back to a height of 1.8 meters. The energy of the ball has been reduced by joules after bouncing back. This reduction happens because potential energy transforms to energy. Hint: Use PE = m × g × h where g = 9.8 m/s2. NextReset
Potential energy is the stored energy present in an object due to its position. The energy of the ball after reduction will be 0.98 joules due to the conversion of potential energy into kinetic energy.
What are potential and kinetic energy?Potential is the stored amount of energy possessed by an object relevant to its height or position, whereas kinetic energy is due to the motion possessed by the object.
According to the conservational energy, the potential energy will be equivalent to the kinetic energy and is calculated as,
Given,
m = 0.5 kilograms
g = 9.8 m/s²
h = 2.0 - 1.8 = 0.2m
ΔPE = -ΔKE
mgh = -ΔKE
0.5 x 9.8 (1.8 - 2) = -ΔKE
-0.98 J = -ΔKE
Therefore, kinetic energy is 0.98 J.
Learn more about kinetic and potential energy here:
https://brainly.com/question/11592500
#SPJ5
what does an atomic number represent atom? 20 PIONTS TO WHO EVER ANSWERS PLS HELP
A)number of protons
B)number of electrons
C)number of neutrons
D)number of protons and neutrons
Which statement best describes the difference between a physical change and a chemical change?
A. A chemical change results in a new element being formed, and a physical change results in a new compound being formed.
B. A physical change is a change from one state of matter to another; a chemical change results in a new substance formed.
C. A physical change produces a new element, and a chemical change results in a bond breaking between atoms.
D. A chemical change does not result in a new substance being formed, whereas a physical change does.
Which element has three unpaired electrons in its p orbital?
A child goes to the kitchen sink to rinse the glass from which he just drank grape juice. as the water runs into the glass, the juice residue turns from ppurple to light blue what is happening
Look up the first ionization energies of silver and manganese; which of these two elements would you call more metallic based on the way we define it in this book?
The ionization energies are related to metallic character. The elements which have low ionization energies tend to behave more metallic. The first ionization energy is the best indication of whether an element behaves as a metal or nonmetal. It can also be used to compare the metallic character of two metals. The ionization energy of manganese is 717 kJ/mol and that of silver is 731 kJ/mol. The ionization energy ionization energy of manganese is smaller than that of silver so it can easily lose electron and undergo chemical reaction. The ionization energy of silver is more therefore it will take time to lose electron and undergo oxidation. Hence, as per the book, manganese is more metallic than silver
What is the value of the bond angles in bf3? enter the bond angle of the molecule?
The BF3 molecule forms a trigonal planar configuration because boron, the central atom, is surrounded by three fluorine atoms. As a result, the bond angles in this molecule are exactly 120 degrees.
Explanation:The bond angles in a BF3 molecule, or boron trifluoride, are determined by its molecular structure. This molecule is arranged in a trigonal planar configuration, and hence the bond angles are exactly 120 degrees.
Let's dive a bit deeper - in geometry any three points in a plane can form an equilateral triangle if they are equidistant from each other. Similarly, in BF3 molecule, the boron atom is at the center and the three fluorine atoms are located at the corners of an equilateral triangle.
Since all angles in an equilateral triangle are 60 degrees and the bond angle is the angle between two consecutive sides, it is twice as much, or 120 degrees.
Learn more about BF3 Molecule here:https://brainly.com/question/3387378
#SPJ12
The bond angles in BF3 are 120°; the molecule's geometry is trigonal planar and highly symmetrical, resulting in a dipole moment of zero. BF3 also tends to bond with a fluoride ion to form BF4-, which is more stable.
Explanation:The value of the bond angles in BF3 is 120°, which corresponds to the molecular geometry known as trigonal planar. Each fluorine atom is positioned at the vertices of an equilateral triangle around the central boron atom, and all bonds are equal in length, and the molecule is highly symmetrical.
Additionally, BF3 has a net dipole moment of zero due to this symmetry. However, BF3 often forms a bond with a fluoride ion, resulting in the formation of BF4−, which completes boron's octet and is more stable.
Learn more about BF3 Bond Angles here:https://brainly.com/question/32146520
#SPJ3
How many dots would a lewis dot structure for neon have?
Determine the density of a 23.4g block that when placed in 25.00mL of water causes the water to rise to a level of 28.70mL?
how many protons are in Uranium -242?
How many hydrogen atoms are in 2.80 mol of ammonium sulfide?
Answer : The number of hydrogen atoms are, [tex]134.89\times 10^{23}[/tex]
Explanation : Given,
Moles of hydrogen atoms = 2.80 mole
As we know that, the formula of ammonium sulfide is, [tex](NH_4)_2S[/tex]. In ammonium sulfide, there are 2 atoms of nitrogen, 8 atoms of hydrogen and 1 atom of sulfur.
Now we have to calculate the number of hydrogen atoms.
As, 1 mole of [tex](NH_4)_2S[/tex] contains [tex]8\times 6.022\times 10^{23}[/tex] number of hydrogen atoms.
So, 2.80 mole of [tex](NH_4)_2S[/tex] contains [tex]2.80\times 8\times \times 6.022\times 10^{23}=134.89\times 10^{23}[/tex] number of hydrogen atoms.
Therefore, the number of hydrogen atoms are, [tex]134.89\times 10^{23}[/tex]
how is a tsunamis form?
A tsunami is a sequence of ocean waves that often originate from the massive volume of water being moved by an underwater earthquake or volcanic eruption.
Undersea disturbance: An underwater earthquake frequently serves as a tsunami's first cause. Strong seismic waves can be produced when tectonic plates in the Earth's crust move or clash.
Displacement of water: The ocean floor frequently moves vertically during an underwater earthquake. A significant volume of water above the bottom is displaced when it rises or falls. This abrupt movement triggers the development of a tsunami.
Tsunami wave generation: Waves propagate outward from the disturbance's epicenter as a result of the water's displacement. These waves have large wavelengths and are initially rather modest, thus they can travel hundreds of kilometres over the ocean.
Wave propagation: The tsunami waves may move quickly, frequently topping hundreds of kilometres per hour, as they spread across the ocean. Yet, they are difficult to spot in the open ocean because to their typically tiny height, which is frequently less than a metre.
Approaching shallow water: The behaviour of tsunami waves alters drastically as they get closer to shallow coastal regions. The waves are slowed down by the shallower water, and the energy that was once dispersed along the wavefront is now concentrated in a smaller area.
Amplification of wave height: The tsunami wave is compressed when it approaches shallow water, raising the height of the wave. The wave may develop into a massive wall of water from a lengthy, almost unnoticeable swell. One of the riskiest characteristics of a tsunami is the abrupt rise in wave height.
Inundation: The tsunami may inflict extensive destruction when it reaches the coast. The wave's strong momentum and substantial water volume have the potential to flood low-lying coastal communities, destroy buildings, and completely destroy anything in its path.
To know more about tsunami:
https://brainly.com/question/31228356
#SPJ2