A solution which contains maximum solute at a given temperature is
Answer: saturated
Explanation:
Saturated solution is defined as the solution in which no more solute particles can be dissolved in the solvent and thus contain maximum solute at a given temperature.
Unsaturated solution is defined as the solution in which more solute particles can be dissolved in the solvent at any particular temperature.
Supersaturated solution is defined as the solution in which more amount of solute particles is present than the solvent particles and thus the solute is in precipitated form.
Find the approximate atomic mass of a water molecule (h2o). give your answer in atomic mass units rounded to the nearest whole number.
Answer: 18 amu
Explanation:
The atomic mass of hydrogen is 1.008 or 1 (rounded to the nearest whole number)
The atomic mass of oxygen is 15.999 or 16 (rounded to the nearest whole number)
There are 2 hydrogen atoms and one oxygen atom in water.
1+1+16= 18 amu
Which is not one of the eight most common elements in Earth’s continental crust? silicon carbon aluminum oxygen
Answer: Carbon
Explanation: The top layer of the earth is known as lithosphere which contain the crust of the earth.
The earths crust contain some of the most abundant elements which facilitate the human life .
In this series of top abundant elements found in Earths continental crust, Oxygen scores the first position and after that Silicon comes as second and Aluminum bags the third position and so on.
Therefore, carbon does not even come in the top 10 elements which are most abundant in the earths crust.
Sulfuric acid is a component of acid rain formed when gaseous sulfur dioxide pollutant reacts with gaseous oxygen and liquid water to form aqueous sulfuric acid. part a write a balanced chemical equation for this reaction. express your answer as a chemical equation. identify all of the phases in your answer.
Answer:
The chemical reaction is :
[tex]2SO_2(g)+O_2(g)+2H_2O(l)\rightarrow 2H_2SO_4(aq)[/tex]
Explanation:
When sulfur dioxide gas reacts with oxygen gas and liquid water it gives aqueous solution of sulfuric acid.
This is reason behind the acidic nature of the rain water during acid rain.The chemical reaction is given as:
[tex]2SO_2(g)+O_2(g)+2H_2O(l)\rightarrow 2H_2SO_4(aq)[/tex]
According to stoichiometry, 2 moles of sulfur dioxide gas reacts with 1 mole of oxygen gas and 2 moles of water to give 2 moles of aqueous sulfuric acid.
Why does every element except hydrogen need at least one neutron in its nucleus?
Two or more than two atoms with different physical or chemical properties can not combine together to form an element. By removing the repulsions among protons inside the nucleus, neutron provide the stability to an atom.
What is element?Element generally consist of atoms or we can atoms combine to form element. Atoms of an element is always same, means all the properties of all atoms of one type of element is same.
An atom of element contains neutrons and protons in the nucleus and electron that revolves around the nucleus. The purpose of neutron is to provide stability to an atom by minimizing the repulsion between protons inside the nucleus.
Therefore by removing the repulsions among protons inside the nucleus, neutron provide the stability to an atom.
To know more about element, here:
https://brainly.com/question/8460633
#SPJ5
A weight loss supplement is advertised in several popular beauty and fashion magazines. The advertisements claim that "the supplement can help anyone lose up to 2 inches off their waist in 60 days.” What would be the best way to increase the scientific reliability of this claim?
a.Advertise at local fitness clubs and in fitness magazines.
b.Find a famous actor or actress to endorse the product.
c.Include before and after photos in the advertisement.
d.Have the product tested by an independent organization.
Answer: d.Have the product tested by an independent organization.
Explanation:
A scientific claim can be define as a statement which is based upon the results that are obtained after the process of experimentation. The results of the claim are acceptable by the scientific society.
d.Have the product tested by an independent organization. is the correct option. This is because of the fact that the independent organization will test the supplement by several clinical trials. The results obtain will be unbiased and reliable.
Write a description of a water molecule as it goes through the complete water cycle. you should include the processes of precipitation, evaporation, condensation, and runoff
The journey of a water molecule through the water cycle begins with evaporation or sublimation, followed by condensation forming clouds. Afterward, precipitation brings the water back to the earth where it becomes part of surface runoff, snowmelt, or infiltrates the soil. Finally, streamflow carries it back to the oceans, completing the cycle.
Explanation:A water molecule undergoes a fascinating journey as it completes the water cycle. Initiated by the sun's energy, this journey starts with evaporation or sublimation, which are processes that turn surface water or frozen water into water vapor, respectively. The water vapor is then transported into the atmosphere.
As the vapor cools down, the process of condensation takes place, forming clouds consisting of condensed water droplets. Over time, these droplets grow in size and eventually fall to the earth in the form of precipitation (like rain or snow).
Once on earth, the water can take a few different paths. Some fall on tree leaves and evaporate again, some fall directly into bodies of water such as lakes or oceans, while some fall on the ground and become surface runoff or snowmelt. This runoff or snowmelt can infiltrate the soil (subsurface water flow) or flow into streams and rivers (streamflow). These streams and rivers then carry it back into the sea or ocean, completing the cycle.
Learn more about Water Cycle here:
https://brainly.com/question/31195929
#SPJ11
The Hope diamond has a mass of 44.0 carats and a density of 3.51 g/cm3. What is the volume of the Hope diamond? (Hint: 1 carat = 0.200 g)
A.
2.5 g/cm3
B.
2.5 g
C.
2.5 cm3
D.
2.5 carats
To find the volume of the Hope diamond, first convert the mass from carats to grams, then divide by the given density. The calculation results in a volume of approximately 2.5 cm³, so the correct answer is option C.
The volume of the Hope diamond can be calculated using its mass and density. First, we convert the mass from carats to grams. Since 1 carat is equivalent to 0.200 grams, the Hope diamond's mass in grams is 44.0 carats × 0.200 g/carat = 8.8 grams. The density formula is density = mass/volume, which can be rearranged to find the volume as volume = mass/density. We use the given density of the diamond, 3.51 g/cm³, to get the volume: volume = 8.8 g / 3.51 g/cm³ = 2.51 cm³. Therefore, the correct answer is 2.5 cm³, so option C is correct.
Do compounds have the same properties as the elements that make them up?
The ____ _____ of an element includes atomic number plus the number of neutrons.
Which the following is an example of an organic compound that contains an attached carbonyl group at the end of a carbon chain?
ketone
aldehyde
ether
amine
Answer : The correct option is, Aldehyde.
Explanation :
Ketone group : It is the class of organic compound in which the [tex]-CO[/tex] group is attached to a hydrocarbon is known as ketone.
The general representation of ketone are, [tex]R-CO-R'[/tex].
For example : Acetone, [tex]H_3C-CO-CH_3[/tex]
Aldehyde group : It is the class of organic compound in which the [tex]-CHO[/tex] group is attached to a hydrocarbon is known as aldehyde.
The general representation of aldehyde are, [tex]R-CHO[/tex].
For example : Ethanal , [tex]H_3C-CH_2-CHO[/tex]
Ether group : It is the class of organic compound in which the oxygen is directly attached to the two alkyl group of carbon is known as ether.
The general representation of ether are, [tex]R-O-R^'[/tex].
For example : Dimethyl ether, [tex]H_3C-O-CH_3[/tex]
Amine group : It is the class of organic compound in which the [tex]-NH_2[/tex] group is directly attached to the alkyl group of carbon is known as amine.
The general representation of amine are, [tex]R-NH_2[/tex].
For example : Ethylamine, [tex]H_3C-CH_2-NH_2[/tex]
As per question, aldehyde is an example of an organic compound that contains an attached carbonyl group at the end of the carbon chain.
Hence, the correct option is, Aldehyde.
Is the polar head of a soap molecule more attracted to calcium or sodium ions?
In order to buffer a strong acid into a weak acid, which has a less dramatic effect on ph, what chemical should be used as the buffer?
In order to buffer a strong acid into a weak acid, salt of strong acid should be used as the buffer.
What are acids?
Acids are defined as substances which on dissociation yield H+ ions , and these substances are sour in taste. Compounds such as HCl, H₂SO₄ and HNO₃ are acids as they yield H+ ions on dissociation.
According to the number of H+ ions which are generated on dissociation acids are classified as mono-protic , di-protic ,tri-protic and polyprotic acids depending on the number of protons which are liberated on dissociation.
Acids are widely used in industries for production of fertilizers, detergents batteries and dyes.They are used in chemical industries for production of chemical compounds like salts which are produced by neutralization reactions.
Learn more about acids,here:
https://brainly.com/question/29796621
#SPJ6
How many lone pairs are on the central atom in BCl3
How many grams of hydrochloric acid will react completely with a block of gold that is 3.2 cm by 3.8 cm by 2.8 cm, if the density of gold is 19.3 g/ml?
What is the very thick liquid called which is found deep underground and is refined before use?
Answer: oil
Explanation:
What atomic or hybrid orbitals make up the sigma bond between c1 and c2 in tetrafluoroethylene, c2f4?
The atomic or hybrid orbitals that make up the sigma bond between C1 and C2 in tetrafluoroethylene, C2F4 are the sp2 hybrid orbitals. Tetrafluoroethylene C2F4 has double bond between C1 and C2. So, sigma bond is made sp2hybrid orbitals.
To add, the simplest perfluorinated alkene, Tetrafluoroethylene belongs to the family of fluorocarbons.
Answer:
hybrid sp2 -orbital make up the sigma bond between C1 and C2 in tetrafluoroethylene
Explanation:
The tetrafluoroethylene has a double bond between the carbons and single bonds between each fluor and carbon because each carbon requires a full octet and each fluor requires a pair of electrons.
In chemistry, hybridization is the interaction of atomic orbitals within an atom to form new hybrid orbitals. In sp2 hybridization, an s orbital and two orbitals are combined p. For this hybridization to occur, the carbon must be attached to three atoms as is the case in the carbon atom in this case. On the other hand, the sigma bond (σ) is formed when there is a front overlap of atomic orbitals; and the pi (π) bond is formed when there is superposition of parallel p orbitals.
Atoms that form sp2 hybridizations can form compounds with double bonds, as in this case between both carbons. Simple bonds are known as sigma bons (σ) and double bonds are composed of a sigma bond and a pi bond. So double bond between sp2 hybrid orbitals formed by one sigma-bond and one pi-bond.
In summary, hybrid sp2-orbital make up the sigma bond between C1 and C2 in tetrafluoroethylene
What type of energy is stored for use at a later time? Bond energy Free energy Kinetic energy Potential energy
Which chemical reaction is a single replacement reaction? A. Ba(ClO3)2 —> BaCl2 + 3O2 B. 2Mg + O2 —> 2MgO C. Zn + CuCl2 —> ZnCl2 + Cu
Why is the law of definite proportions important?
Which statements describe kinetic and potential energy? Check all that apply. Energy can be stored in the position of an object. Energy is not present in a moving object. Energy can be stored in the position of the particles that make up a substance. Energy exists as movement of the particles of a substance. Energy is greater in faster-moving particles than in slower-moving particles. Energy is lower in objects with greater mass than in objects with less mass.
Kinetic and potential energy is the form of energy, the object exists. Energy is neither created nor destroyed. It changes from one form to another.
The energy of the moving object is termed Kinetic energy. However, the stored energy or the energy of the object in the stationary position is the Potential energy.
Energy can be stored in the position of an object.The statement is true, as the stored energy is the potential energy.
Energy is not present in the moving object.This statement is false, as the moving object energy is the kinetic energy of the object.
Energy can be stored in the position of the particles that make up a substance.The statement is true, as the potential energy of the object is stored in its particles.
Energy exists as the movement of the particles of a substance.The movement of the particle of a substance will result in the kinetic energy of the substance. Thus the statement is true.
Energy is greater in faster-moving particles than in slower-moving particles.The statement is true, as fast the object moves more energy will be required and the conversion of more potential energy to kinetic energy takes place.
Energy is lower in objects with greater mass than in objects with less mass.The statement is false, as the greater the mass of the object, the greater will be the number of particles and more energy will be stored.
For more information, refer to the link:
https://brainly.com/question/17858145
Zinc and magnesium metal each reacts with hydrochloric acid to make chloride salts of the respective metals, and hydrogen gas. a 11.20-g mixture of zinc and magnesium produces 0.6854 g of hydrogen gas upon being mixed with an excess of hydrochloric acid. determine the percent magnesium by mass in the original mixture.
Final answer:
The percent magnesium by mass in the original mixture is 153.2%.
Explanation:
To determine the percent magnesium by mass in the original mixture, we need to calculate the mass of magnesium in the mixture. We know that the total mass of the mixture is 11.20 g, and 0.6854 g of hydrogen gas is produced.
First, we need to calculate the moles of hydrogen gas produced. Since 1 mole of hydrogen gas is produced for every 2 moles of magnesium, we can use the molar mass of magnesium (24.31 g/mol) to find the moles of magnesium:
moles of Mg = (0.6854 g H₂) x (1 mol Mg / 2 mol H₂) x (24.31 g/mol) = 0.704 mol Mg
Next, we can calculate the mass of magnesium:
mass of Mg = (0.704 mol Mg) x (24.31 g/mol) = 17.12624 g Mg
Finally, we can calculate the percent magnesium by mass:
percent magnesium = (mass of Mg / total mass of mixture) x 100% = (17.12624 g / 11.20 g) x 100% = 153.2%
When sodium and chlorine form an ionic compound, the chemical formula is written as __________.
a. ClNa
b. NaCl
c. Cl2Na
d. Na2Cl
A student places three ice cubes in a beaker and allows them to partially melt. if she measures the temperature of the water in the beaker, what will she most likely observe? explain your answer.
Temperature does not change during melting because the heat absorbed is used to overcome intermolecular forces rather than to increase the kinetic energy of the particles.
As long as both ice and water are present in the beaker, the temperature of the water will not increase.
The freezing point of water is 0°C (273 K).
The water's temperature should be 0°C (273 K).
When carrying out the experiment of putting three ice cubes in a beaker and letting them partially melt, the student will observe that when measuring the temperature, it will not change during the melting of the ice.
Physical States of WaterIt corresponds to the water cycle in nature, that is, the processes of water transformation, through:
FusionVaporizationSolidificationLiquefactionSublimationTherefore, there are two laws that determine fusion, which are related to a pure and crystalline substance under a certain pressure will not change its temperature and will remain constant.
This is because the heat absorbed is not used to increase the kinetic energy of the particles, but to overcome the forces of interaction between the molecules.
Find out more information about fusion here:
https://brainly.com/question/2426950
The number of valence electrons in an element with electron configuration 1s2 2s2 2p6 3s2 3p4 is ________.
Answer:
6
Explanation:
The given electron configuration 1s² 2s² 2p⁶ 3s² 3p⁴.
The valence shell of an atom is the outermost orbit. Here the valence shell is 3 with electrons occupying the s and p orbitals.
The s orbital has 2 electrons and the 3p orbital has 6 electrons. So adding all the electrons in the 3s and 3p orbital we have a total of 6 electrons in the 3rd valence shell.
The number of valence electron in the element is 6 electrons
Valence electron(s) are the electrons located on the outermost shell of an atom.
From the question given above, we obtained:
Electronic configuration => 1s² 2s²2p⁶ 3s²3p⁴
The valence shell is => 3s²3p⁴Total electron in valence shell = 2 + 4
Total electron in valence shell = 6 electronsTherefore, the number of valence electron in the element is 6 electrons.
Learn more: https://brainly.com/question/18214726
what is the first step when calculating the molar mass of a compound ? A.multiply the total number of atoms in the compound by the compound by the combined molar mass.B.Add the total number of atoms for each element of the compound together.C.add the molar mass for each element of the compound together to find the total.D.multiply the number of atoms for each element in the compound by the molar mass.
To calculate the molar mass of a compound, first retrieve the atomic masses for each element from the periodic table, multiply them by the number of atoms in the compound, and add the totals.
Explanation:The first step when calculating the molar mass of a compound is to identify the atomic masses of each element in the compound. You can find these on the periodic table. Once you have the atomic masses, count the number of atoms for each element in the molecular formula. Then, multiply this number by the atomic mass for each element. Finally, add up all of these values to get the total molar mass.
For example, to calculate the molar mass of glucose (C6H12O6), you would do the following:
Identify the atomic masses from the periodic table: Carbon (C) 12.01 g/mol, Hydrogen (H) 1.008 g/mol, and Oxygen (O) 15.999 g/mol.Multiply the number of each type of atom by its atomic mass: (6 \\* 12.01) + (12 \\* 1.008) + (6 \\* 15.999).Add these amounts together to find the total molar mass of glucose.Predict how the addition of hydrogen gas would affect the initial rate of the reaction below, and explain your prediction.
H2 (g) + I2 (g) -> 2 HI
Explanation:
According to Le Chaltelier's principle, when a system is in chemical equilibrium and there occurs any change in concentration, temperature, or pressure then the equilibrium will shift in the direction which is opposing the change.
For example, when concentration of hydrogen gas is increased for the reaction [tex]H_{g} + I_{2}(g) \rightarrow 2HI[/tex] then equilibrium will shift of the right hand side.
That is, formation of product will become faster on increasing the concentration of hydrogen gas.
The density of water is equal to 1.0 g/cm3. a substance with density equal to 0.9 g/cm3 would _____ in water.
Answer: sink
Explanation:
Consider the incomplete reaction below.
NaOH + X mc005-1.jpg NaCH3COO + H2O
What is X in this reaction?
NH4OH
H3PO4
H2CO3
CH3COOH
NaOH + X → NaCH3COO + H2O
In the incomplete reaction above x is CH3COOH ( acetic acid)
Explanation
carboxylic acid react with metal hydroxide to form salt and water. sodium hydroxide (NaOH) react with acetic acid to form sodium acetate ( NaCH3COO and water H2O.NaOH + CH3COOH → NaCH3COO (salt) + H2O
Which of the following equations violates the law of conservation of mass?
A) 2Al + 6HCl yields 2AlCl3 + 3H2
B) Na2C2O4 + Pb(NO3)2 yields PbC2O4 + 2NaNO3
C) AgNO3 + LiCl yields AgCl + LiNO3
D) 3Ca + 2Cr(NO3)3 yields 3Ca(NO3)3 + 2Cr
Answer: Option (D) is the correct answer.
Explanation:
Law of conservation of mass states that energy can neither be created nor it can be destroyed. It can only be transformed from one form to another.
Therefore, in a chemical reaction an equation can only be balanced if the number of reactants equal the number of products because energy required for reactants is utilized in the formation of the products.
For example, [tex]2Al + 6HCl \rightarrow 2AlCl_{3} + 3H_{2}[/tex] is a balanced equation because the number of reactant atoms equal the number of product atoms.
Thus, we can conclude that out of the given options, [tex]3Ca + 2Cr(NO3)_3 \rightarrow 3Ca(NO3)_{3} + 2Cr[/tex] equations violates the law of conservation of mass because number of reactant atoms does not equal the number of product atoms.