Answer : The final volume of gas will be, 5.77 liters
Explanation :
Charles' Law : It is defined as the volume of the gas is directly proportional to the temperature of the gas at constant pressure and number of moles.
[tex]V\propto T[/tex]
or,
[tex]\frac{V_1}{V_2}=\frac{T_1}{T_2}[/tex]
where,
[tex]V_1[/tex] = initial volume of gas = 5.00 L
[tex]V_2[/tex] = final volume of gas = ?
[tex]T_1[/tex] = initial temperature of gas = [tex]50^oC=273+50=323K[/tex]
[tex]T_2[/tex] = final temperature of gas = [tex]100^oC=273+100=373K[/tex]
Now put all the given values in the above formula, we get the final volume of the gas.
[tex]\frac{5L}{V_2}=\frac{323K}{373K}[/tex]
[tex]V_2=5.77L[/tex]
Therefore, the final volume of gas will be, 5.77 liters
Why is the huronian supergroup rock formation particularly interesting to scientists
The Huronian Supergroup is interesting to scientists due to its age, the presence of primitive rock, and evidence of past watery environments. It gives unique insight into the planet's early history.
Explanation:The Huronian Supergroup rock formation is particularly interesting to scientists for many reasons. This rock formation is known for being one of the oldest exposed rock formations available for study, providing crucial insights into the early history of the Earth.
One significant feature is the presence of primitive rock, which has largely escaped chemical modification by heating. This kind of rock is usually only found in comets, asteroids, and small planetary moons, so its presence on Earth in the Huronian Supergroup is of particular interest to scientists because this material represents the original material out of which the planetary system was created.
The presence of layered sedimentary rock with evidence of evaporation also suggests that this area was once underwater, possibly a shallow saltwater lake. The presence of hematite within the rocks, which forms only in watery environments, also supports this theory. This information is vital to creating accurate models of the past climates and environments of the planet.
Learn more about Huronian Supergroup here:https://brainly.com/question/34277680
#SPJ11
In which group do all atoms have two valence electrons in the ground state?
The softest and hardest minerals are?
How many additional valence electrons does bromine need to have a full valence shell?
Answer:
one
Explanation:
A mixture of 2 or more substances in which the molecules of the substances are evenly mixed
What is the density of a piece of wood that has a mass of 2.74 g and a volume of 3.10 cm3?
The density of the piece of wood is approximately 0.88 g/cm³.
Explanation:The density of a substance can be calculated by dividing its mass by its volume. In this case, the mass of the piece of wood is 2.74 g and the volume is 3.10 cm³. To find the density, we divide the mass by the volume:
Density = Mass/Volume
Density = 2.74 g/3.10 cm³
Using a calculator, we find that the density of the piece of wood is approximately 0.88 g/cm³.
Learn more about Density here:https://brainly.com/question/29775886
#SPJ2
Which electron in magnesium is most shielded from nuclear charge?
Explanation:
The sum of total charge of all the protons present inside the nucleus of an atom is known as the nuclear charge.
As the size of an atom increase there occurs a decrease in nuclear charge. This is because number of shells increases as the size of an atom increases. Therefore, force of attraction between the nucleus of the atom and its outermost electrons decreases.
It means electrons are shielded by the number of shells.
Due to this valence electrons can be easily lost by the atom in a chemical reaction.
Atomic number of magnesium is 12 and its electronic configuration is [tex]1s^{2}2s^{2}2p^{6}3s^{2}[/tex].
Hence, nuclear charge felt by the electrons present in 3s sub-shell will be the least.
Thus, we can conclude that electron is 3s subshell in magnesium is most shielded from nuclear charge.
5. for the following measurements is expressed to three significant figures? a) 0.007 m b) 7077 mg c) 7.30 x 10^-7 km d) 0.070
Identify the species oxidized. 2 al3+(aq) + 2 fe(s) → 2 al(s) + 3 fe2+(aq)
The species oxidized in the reaction is Iron Fe.
The oxidation number assigned to Al is +3
The oxidation number assigned to Fe is +2
Here, in the reaction the oxidation number of iron Fe is increased to +3
Hence, we can conclude that the species oxidized in the reaction is Iron Fe.
To know more about oxidation number, refer to the link:
https://brainly.com/question/15167411?referrer=searchResults
Write net ionic equation to show the reaction of aqueous hg2(no3)2 with aqueous sodium chloride to form solid hg2cl2 and aqueous sodium nitrate.
Final answer:
The net ionic equation for the reaction is Hg2^2+(aq) + 2Cl-(aq) → Hg2Cl2(s).
Explanation:
The net ionic equation for the reaction between aqueous Hg2(NO3)2 and aqueous sodium chloride to form solid Hg2Cl2 and aqueous sodium nitrate is as follows:
Hg2^2+(aq) + 2Cl-(aq) → Hg2Cl2(s)
This net ionic equation represents the actual chemical change that occurs in the reaction, focusing only on the species that are directly involved in the formation of the solid product and neglecting the spectator ions. The balanced molecular equation and complete ionic equation for this reaction include the spectator ions but are not essential to represent the fundamental chemical change.
What ability allows carbon atoms to form a large number of molecules?
What two substances are indicated by the cobalt chloride and limewater tests?
What is the most important change in a chemical change?
1) identity
2)shape
3)size
4)form
5)state
A cheeseburger from a fast food restaurant contains 19 g of fat, 20 g of carbohydrate, and 28 g of protein. how many kcal of energy does the cheeseburger contain? (the accepted caloric values for foods are 4.0 kcal/g for carbohydrate, 9 kcal/g for fat, and 4 kcal/g for protein.) report the answer to 2 significant figures.
We simply get the sum of the product of each mass and caloric values.
Total energy = 19 g * 9 kcal / g + 20 g * 4 kcal / g + 28 g * 4 kcal / g
Total energy = 363 kcal
Rounding of f to 2 significant fig:
Total energy = 360 kcal
The measure of heat and energy present in the fuel and food is called the calorific value. The calorific value is measured in kilojoule per kilogram (KJ/Kg)
The total energy of one meal is calculated by directly adding the energy given by carbohydrates, fats and proteins.
The energy can be calculated as:
Energy from 1 gm of carbohydrate = 4.0 kcal/g
Then, the energy from 20 g of carbohydrate = 20* 4 kcal/g
= 80 kcal/g
Energy from 1 gm of fats = 9.0 kcal/gThen, the energy from 19 g of fats= 19* 9 kcal/g
= 171 kcal/g
Energy from 1 gm of protein = 4.0 kcal/gThen, the energy from 28 g of protein = 28* 4 kcal/g
= 112 kcal/g
Now add the energy from all the constituents:Total energy = 80 kcal/g + 171 kcal/g + 112 kcal/g
= 363 kcal/g
Therefore, the total amount of kcal of energy present in the cheeseburger is 363 kcal.
To learn more about total energy and calories refer to the link:
https://brainly.com/question/19928430
Which of the following is an example of kinetic energy? (2 points) Select one: a. chemical energy b. gravitational energy c. nuclear energy d. thermal energy
The density of a mystery solid is 1.00 g/cm3. will this float or sink in pure water?
Answer: The mystery solid will sink.
Explanation:
Density is defined as the ratio of mass and volume of the object. The formula used to calculate density is:
[tex]\text{Density of object}=\frac{\text{Mass of the object}}{\text{Volume of the object}}[/tex]
If the density of an object is less than the density of the liquid, the object will float in the liquid.If the density of an object is more than the density of the liquid, the object will sink in the liquid.We are given:
Density of mystery solid = [tex]1.00g/cm^3[/tex]
We know that:
Density of pure water = [tex]0.9982g/cm^3[/tex]
As, the density of mystery solid is more than the density of water. So, the object will sink into the pure water.
The mystery solid will neither float nor sink in pure water.
Explanation:The density of a mystery solid is 1.00 g/cm3. To determine whether it will float or sink in pure water, we need to compare the density of the solid with the density of water. If the density of the solid is less than the density of water (1.00 g/cm3), it will float. However, if the density of the solid is greater than the density of water, it will sink.
In this case, since the density of the mystery solid is equal to the density of water, 1.00 g/cm3, the solid will neither float nor sink in pure water. It will remain suspended at the water's surface.
Learn more about Density here:https://brainly.com/question/29775886
#SPJ3
How many moles of magnesium chloride are formed when 55 ml of 0.70 m hcl is added to 42 ml of 1.204 g mg(oh)2?
To find the moles of magnesium chloride formed, first calculate the moles of HCl and Mg(OH)2. Then, use the stoichiometry of the balanced chemical equation to determine the moles of MgCl2. The moles of MgCl2 formed will be half of the moles of HCl.
Explanation:To calculate the moles of magnesium chloride formed when 55 mL of 0.70 M HCl is added to 42 mL of 1.204 g Mg(OH)2, we need to determine the limiting reactant and use stoichiometry. First, let's calculate the moles of HCl:
Moles of HCl = concentration (M) x volume (L) = 0.70 M x 0.055 L = 0.0385 moles HCl
Next, let's calculate the moles of Mg(OH)2:
Moles of Mg(OH)2 = mass / molar mass = 1.204 g / (24.31 g/mol + 2(16.00 g/mol) + 2(1.008 g/mol)) = 0.0100 moles Mg(OH)2
From the balanced chemical equation, we know that 2 moles of HCl reacts with 1 mole of Mg(OH)2 to form 1 mole of MgCl2. Therefore, the moles of MgCl2 formed will be half of the moles of HCl, which is:
Moles of MgCl2 = 0.0385 moles HCl / 2 = 0.0193 moles MgCl2
Learn more about Moles of compounds here:https://brainly.com/question/11588417
#SPJ2
What is the cost of 1.5 pound of sugar if sugar costs $1.37 per 5.0 pounds?
Nickel metal is added to a solution of copper(ii) nitrate. express your answer as a chemical equation. identify all of the phases in your answer. enter no reaction if no reaction occurs.
The chemical equation will be[tex]\rm \bold{Ni\;(s)+\;Cu(NO_3)_2\;(aq)\rightarrow\;Cu\;(s)+Ni(NO_3)_2\;(aq)}[/tex].
Nickel and Copper belong to group 4 of the periodic table. According to the trend, nickel has been more reactive than copper and has been able to displace copper in the compound.
The reaction between copper nitrate and nickel will be the displacement reaction.
The reaction will be:
[tex]\rm Ni\;+\;Cu(NO_3)_2\;\rightarrow\;Cu\;+Ni(NO_3)_2[/tex]
The reaction has nickel in the solid state, and copper nitrate in the aqueous state, the nickel nitrate solution will be formed with precipitated solid copper.
The reaction will be:
[tex]\rm \bold{Ni\;(s)+\;Cu(NO_3)_2\;(aq)\rightarrow\;Cu\;(s)+Ni(NO_3)_2\;(aq)}[/tex]
For more information about the chemical equation, refer to the link:
https://brainly.com/question/12271256
Scientific notation 0.000002
The exponent just on ten will be the amount of decimal points you advance. The scientific notation of 0.000002 is 2x10⁻⁶.
What is scientific notation?Scientific notation is indeed a method of communicating numbers that are either too large or too little to be represented in decimal form. It is also known as 'scientific form' in the United Kingdom, and it is often used among scientists, mathematicians.
The first is merely the digits, with both the decimal place put after the very first digit, and the second is multiplication by 10 to a components impacting of decimal points, which places the decimal place where it used to be. Shift the decimal towards left of decimal point to ensure that there is 1 non-zero digit. The exponent just on ten will be the amount of decimal points you advance. The scientific notation of 0.000002 is 2x10⁻⁶.
Therefore, the scientific notation of 0.000002 is 2x10⁻⁶.
To learn more about scientific notation, here:
https://brainly.com/question/18073768
#SPJ2
Put the steps of the scientific method into the correct order.
Answer:
Make a hypothesis ---> Conduct an experiment --->Analyze the experimental data ---> Communicate the results
Explanation:
What is the mass of a sample of a substance with a volume of 120 ml and a density of 0.75 g/ml?
Answer:
Density=mass / volume.
0.75= mass / 120.
mass= 0.75×120.
mass=90g
Ted wants to hang a wall clock on the wall by using a string. If the mass of the wall clock is 0.250 kilograms, what should be the tension of the string so that it can sustain the weight of the wall clock?
What should be done with an unused or used chemical once it has been taken from the original container?
By making two covalent bonds, an o atom (with 8 protons) fills its valence shell. why does the atom's charge stay close to zero
Since heat transfers take place only between systems with different temperatures, explain why the third law of thermodynamics is supported by our current understanding of matter
Final answer:
The third law of thermodynamics is aligned with our understanding of matter and heat transfer because it is consistent with the tendency of energy to spontaneously transfer from hotter to colder systems, a concept supported by the second law of thermodynamics and energy conservation principles.
Explanation:
The student's question addresses why the third law of thermodynamics is supported by our current understanding of matter, particularly considering that heat transfers occur only between systems with different temperatures. The third law of thermodynamics implies that as the temperature of a system approaches absolute zero, the entropy, or disorder, of the system approaches a minimum value. This law is supported by the fact that matter has a property called thermal conductivity, meaning that energy is transferred spontaneously from a higher temperature system to a lower temperature system because the disorder is more probable, and there is a tendency towards energy dispersion.
These concepts are also tied to heat, which is the process of energy transfer due to temperature differences, and the second law of thermodynamics, highlighting that energy transfers are never completely efficient and some energy is always lost as heat. Furthermore, the concept of energy conservation within the first law of thermodynamics states that the total energy of a system is conserved during such interactions. Overall, this understanding is crucial for comprehending the limitations and behaviors in the transfer of energy between systems.
NH3 is nitrogen trihydride (ammonia) and BF3 is boron trifluoride. What is the name for AlCl3 and why?
Explanation:
In [tex]AlCl_{3}[/tex] compound, three chlorine atoms are attached to an aluminium atom.
Since atomic number of aluminium is 13 and it has three extra electrons. So, it donate single electron to each chlorine atom.
Therefore, octet of chlorine gets complete.
As, three chlorine atoms are attached to aluminium so, name of [tex]AlCl_{3}[/tex] is aluminium trichloride.
If your lab procedure instructs you to add two parts of acid to each one part of water and you start with 25 ml of water, how much acid will you add, and how will you add it
In the measurement 0.503 L , which digit is the estimated digit ?
The estimated digit in the measurement 0.503 L is the last digit, 3.
In the measurement 0.503 L, the digit that is estimated is the last digit, which is 3. This is because precision in measurement dictates that the final digit reported is always the one that has some level of uncertainty or estimation. Therefore, in 0.503 L, the precise digits are 0, 5, and the estimated digit is 3. Almonds may be small, but they pack a great number of nutrients, including protein, vitamin E, and vitamin B2. Almonds also contain antioxidants and monounsaturated fat, a “good” type of fat that, like the omega-3 fatty acids, reduces the risk of heart disease.
Review the graph that represents the whole class data. Notice that the almond samples provide a large amount of chemical energy. What is the BEST explanation for this large amount of available energy?
A) Vitamins, like vitamin E and B2, contain large amounts of usable chemical energy.
B) Fats and proteins are molecules with many chemical bonds; the bonds release much energy when broken.
C) The energy provided by the almonds is related to mass rather than the chemical composition of the almond.
D) Monounsaturated fats, the good fats, contain many chemical bonds that release large amounts of chemical energy.
Option B is correct.