Which chemical is produced in the highest volume in both the united states and the world?

Answers

Answer 1
Sulfuric acid has the highest production levels of any chemical in both the US and the world. The US alone creates 37 million tons a year. It has many uses, but one of the largest is as fertilizer.

Related Questions

Covalent compounds occur __________. between a metal and a nonmetal that share electrons when nonmetals gain or lose electrons only between metals when nonmetals share electrons

Answers

When non metals share electrons

In what order do the levels get filled with electrons?

Answers

you can use this equation to work out the number of maximum electrons in each shell. (n×n)×2

The first level must be filled with two electrons before electrons can be added to the second level.

(Plato users)

Hypnotized by the twirling necklace held in her mother's hand, Becks was transported to another era. She imagined that she could see herself in the 1920s, the period in which the necklace was made. As the necklace danced in front of her, Becks could see what that time would have been like. The women were dressed in fringed dresses and their hair was swept up on one side. The men were wearing pinstriped suits with their hair slicked back. They were all dancing and laughing in a cramped dance room. This is all Becks saw as she gazed intently at the spinning necklace. From which point of view is this passage written? A. first person B. The point of view shifts from third person to second person. C. third person D. second person

Answers

I think that it would be answer B

Under what conditions will deviations from the "ideal" gas be expected? select all that apply. low temperatures high temperatures low pressure high pressure

Answers

The answer is at very low temperatures and very high pressures, real gases deviate from the behavior predicted by gas laws.

Ideal gas law is valid only for ideal gas not for vanderwaal gas.  At very low temperatures and very high pressures, real gases deviate from the behavior predicted by gas laws.

What is ideal gas equation?

Ideal gas equation is the mathematical expression that relates pressure volume and temperature.

Mathematically the relation between pressure, temperature and volume is given as

PV=nRT

where,

P = pressure of ideal gas

V= volume of gas

n =number of moles of gas

T =temperature

R = Gas constant = 8.314J/K/mo

This law is not valid at very low temperatures and very high pressures because of the interaction between the particles increases and the factor of reduced volume come into picture.

Therefore, at very low temperatures and very high pressures, real gases deviate from the behavior predicted by gas laws.

To learn more about ideal gas equation, here:

https://brainly.com/question/14826347

#SPJ5

12 the products of the neutralization reaction between hydrochloric acid and magnesium hydroxide are

Answers

The products of the neutralization reaction between hydrochloric acid and magnesium hydroxide are Magnesium chloride and water.

This is a(n) ____ reaction. c12h22o11 + h2o → c6h12o6 + c6h12o6

Answers

Since the chemical bonds are broken by an addition of water I believe the answer is Hydrolysis!

Which is the correct number of valence electrons in the element sulfur (s)?

Answers

Answer:The answer is 6

Explanation:

Appropriate units for the speed of a chemical reaction, the reaction rate, are _______.

Answers

Appropriate units for the speed of a chemical reaction, the reaction rate, are M/s

When a candle is burning is it a physical or chemical change?

Answers

it is a physical chance
It is both a physical and chemical change. Let me know if you need an explanation on why :) 

Hope it helps!

When a mixture of ice and water originally at 0 is heated, the temperature remains constant until all of the ice melts?

Answers

When heat is applied during a phase change, there is zero change in temperature. This is because all the heat supplied is used to break the bonds of the solid molecules to form liquid molecules. So in essence, there the temperature remains constant until all solid molecules bond are broken down (until all ice melts into liquid).

 

So the answer is Yes or True.

What is a reduction potential chart show? What information does it have?

Answers

It shows how likely chemical species are to gain electrons and therefore, be "reduced". Reduction potential is measured in volts(V) and the more positive the reduction potential value, the more likely it will be reduced.

Answer:

It shows the reduction-oxidation tendency of chemical species present in the chart.

Explanation:

The reduction potential chart also known as activity series or electrochemical series is a reference series or chart constructed on the basis of reduction potential of standard hydrogen electrode (SHE). The standard reduction potential of SHE is considered to be zero.

Any species which can reduce SHE has negative reduction potential in the chart.

Any species which can oxidize SHE has positive reduction potential in the chart.

Higher the reduction potential more the tendency to undergo reduction and to oxidize others.

Lower the reduction potential more the tendency to undergo oxidation and to reduce others.

What is the percent yield of hbr if 85.00 g of hbr was formed from 30. g of h2?

Answers

1) Chemical equation

H2 (g) + Br2 (g) ---> 2 HBr

2) molar ratios

1 mol H2 : 1 mol Br2 : 2 moles HBr

3) convert 30.0 g of H2 to number of moles

moles = mass in grams / molar mass = 30.0 g / 2.02 g/mol = 14.85 moles

4) calculate theoretical yield

2 moles HBr / 1 mol H2 = x / 14.85 moles H2

=> x = 14.85 moles H2 * 2 moles HBr / 1 mol H2 = 29.7 moles HBr

5) convert 59.52 moles HBr to mass

mass = number of moles * molar mass = 29.7 moles * 80.91 g /mol = 2403.03 g

6) percent yield = (actual yield / theoretical yield) * 100 = (85.00g / 2403.03g)*100 = 3.54%

Answer: 3.54%

Ok, lets see the definitions of percent yield, actual yield and theoretical yield.

Percent yield is the ratio of actual yield to theoretical yield.

Actual yield- amount of product produced in the EXPERIMENT.

Theoretical yield- max amount of product produced through CALCULATIONS

% yield= actual yield (from experiment)/theoretical yield (from calculation) *100

1st Step: Write the reaction 

H2 + Br2 --> 2 HBr

2nd Step: Get the mass ratio of H2 and HBr to find theoretical yield

1 mole H2 gives 2 moles HBr ( molar mass of H2= 2 g/mol, HBr= 81 g/mol)

2 g H2 gives 2*81= 162 g HBr

30 g H2 gives 162*30/2 = 2430 g HBr ( The equation is 2 g H2/ 30 gH2= 162 g HBr/ x g HBr)

So theoretically 2430 g HBr are produced by calculation ( THEORETICAL YIELD)

By experiment 85 g HBr are produced as it is given at the question ( ACTUAL YIELD)

% yield= actual yield / theoretical yield *100 = 85/2430 *100= 3.5 %

The percent yield is 3.5 %.

1. Nitrogen, oxygen, and fluorine atoms all seem pretty similar, at first. How many valence electrons does an atom of each have? (4 points)

Nitrogen ______ Oxygen ______ Fluorine ______

Answers

nitrogen is 5 valence electrons
oxygen is 6 valence electrons
fluorine is 7 electrons

The process in which water changes from a liquid to a vapor is known as __________.

Answers

Hello!
The answer is Evaporation!

When you add enough heat to a liquid, it boils turning into a gas. This is called Evaporation

What conditions lead to the formation of large crystals in an igneous rock?

Answers

slowly cooling magma

The energy released in the fission of a 235u nucleus is about 200 mev. how much rest mass (in kg) is converted to energy in this fission?

Answers

Final answer:

To convert 1.00 kg of 235U into energy, about 9.14 × 10^-4 kg of rest mass is converted.

Explanation:

The energy released in the fission of a 235U nucleus is about 200 MeV. To find out how much rest mass is converted to energy, we need to calculate the number of 235U atoms in 1.00 kg. One mole of 235U has a mass of 235.04 grams, so there are 4.25 moles of 235U in 1.00 kg. Using Avogadro's number (6.02 × 10^23 U/mol), we can calculate that there are 2.56 × 10^24 atoms of 235U in 1.00 kg. The total energy released is the number of atoms times the given energy per U fission, which is:

(2.56 × 10^24 atoms)(200 MeV/atom) = 5.12 × 10^26 MeV

To convert this to kilograms, we can use the conversion factor 1 MeV = 1.783 × 10^-30 kg, so:

(5.12 × 10^26 MeV)(1.783 × 10^-30 kg/MeV) = 9.14 × 10^-4 kg

Therefore, about 9.14 × 10^-4 kg of rest mass is converted to energy in this fission.

Learn more about Conversion of mass to energy here:

https://brainly.com/question/28326751

#SPJ6

Why would you classify hydrogen as a nonmetal 2017?

Answers

yes hydrogen is a non metal 
It is mainly because we have chemical compounds named Hydrides - compounds which consists of metal ions and hydrogen ion [tex]H^{-} [/tex]. So, hydrogen ion is used to "take" electron more than "give" it, as we also can see in organic compounds. Third reason is that its standard electrode potential is further higher than metals' potentials, which obviously makes it nonmetal.
Hope this helps!

The volume of one mole of a substance is 22.4 L at STP for all ____.

A. Gases
B. Liquids
C. Solids
D. Compounds

Answers

The answer to this is A.
The volume of one mole of a substance is 22.4 L at STP for all GASES.
The principle of molar volume states that, one mole of any gas at STP [Standard Temperature and Pressure] will occupy the same volume as one mole of any other gas at STP. This volume is 22.4 liter/mol and is called the molar volume of a gas.

The temperature levels in a a nuclear reactor are maintained primarily by the use of

Answers

.The temperature levels in a nuclear reactor are maintained primarily by the use of

1. shielding

2. coolants

3. moderators

4. control rods

If a mineral has a daughter to parent ration of 3:1 (three daughter atoms for every one parent atom), how many half-lives have passed since the mineral formed?

Answers

The answer to this question would be: 2 half-lives

In this question, the mineral has a daughter to parent ratio of 3:1. That means, the amount of parent mass should be are 1/(3+1)= 1/4 of the total mass. For every half live, the parent mass would become 1/2. Then for 1/4, the number of half-lives should be:
1/2^x= 1/4
1/2^x= 1/2^2
x=2

Pls Help with this Chemistry question

Which of the following energy level changes would give off the most light energy
A.n=5 to n=1
B.n=4 to n=5
C.n=2 to n=5
D.n=5 to n=4

Answers

A decrease in n emits energy and an increase absorbs energy. This mean the greater the decrease the greater amount energy is being emitted. So the answer should be:
A. n=5 to n=1



Really hopes this helps!

"The correct option is A. [tex]\( n=5 \) to \( n=1 \).[/tex]

In atomic physics, the energy of the emitted photon when an electron transitions from one energy level to another is given by the Rydberg formula:

[tex]\[ E = h \cdot f = R \cdot \left( \frac{1}{n_f^2} - \frac{1}{n_i^2} \right) \][/tex] where \( h \) is Planck's constant, \( f \) is the frequency of the emitted photon, \( R \) is the Rydberg constant for hydrogen, \( n_f \) is the final energy level, and \( n_i \) is the initial energy level.

The energy of the photon is directly proportional to the frequency of the light emitted, and the frequency is inversely proportional to the wavelength of the light. Therefore, the greater the energy difference between the two levels, the higher the frequency of the emitted light and the more energy the light carries.

 Let's calculate the energy released for each transition:

[tex]A. \( n=5 \) to \( n=1 \):[/tex]

[tex]\[ E_{5 \to 1} = R \cdot \left( \frac{1}{1^2} - \frac{1}{5^2} \right) = R \cdot \left( 1 - \frac{1}{25} \right) = R \cdot \frac{24}{25} \][/tex]

 B. [tex]\( n=4 \) to \( n=5 \):[/tex]

[tex]\[ E_{4 \to 5} = R \cdot \left( \frac{1}{5^2} - \frac{1}{4^2} \right) = R \cdot \left( \frac{1}{25} - \frac{1}{16} \right) = R \cdot \left( -\frac{9}{400} \right) \][/tex]

(Note: This transition actually absorbs energy, as the electron moves to a higher energy level.)

C.[tex]\( n=2 \) to \( n=5 \):[/tex]

[tex]\[ E_{2 \to 5} = R \cdot \left( \frac{1}{5^2} - \frac{1}{2^2} \right) = R \cdot \left( \frac{1}{25} - \frac{1}{4} \right) = R \cdot \left( -\frac{21}{100} \right) \][/tex]

(Again, this transition absorbs energy.)

 D. [tex]\( n=5 \) to \( n=4 \):[/tex]

[tex]\[ E_{5 \to 4} = R \cdot \left( \frac{1}{4^2} - \frac{1}{5^2} \right) = R \cdot \left( \frac{1}{16} - \frac{1}{25} \right) = R \cdot \frac{9}{400} \][/tex]

 Comparing the magnitudes of the energy changes, it is clear that the transition from \( n=5 \) to \( n=1 \) releases the most energy because it has the largest difference in energy levels. This corresponds to the largest absolute value of the energy change, which means it will give off the most light energy.

The presence of the carbon-carbon double bond in eugenol can be tested using the bromine water test. write a balance equation for the reaction involved in this test?

Answers

The balance chemical equation for the reaction that involved in bromine water test to check the presence of carbon-carbon double bond is;
C₁₀H₁₂O₂ + Br₂ +H₂O → C₁₀H₁₃O₃Br + HBr
Some C₁₀H₁₂O₂Br₂ also form as a product.
When we use bromine water test to detect the double bond in alkenes, an alkene will change the color of bromine from brown to colorless. 

Magda has the two magnets shown below what will happen if magda tries to push the north poles of the two magnets toward one another

Answers

They will repel one another because opposites attract, but like charges will repel.

How is vapor pressure influenced by the strength of intermolecular forces?

Answers

They include London dispersion forces, dipole interactions, and hydrogen bonds.Intermolecular forces affect many properties of compounds, such as vapor pressure and boiling point.

Carbon monoxide (co ) is used as a purifying gas in mond's process to produce nickel from its ores. what type of bonding occurs between the atoms of a co molecule?

Answers

Carbon monoxide has a special type of bond that is a triple bond. The triple bond consists of two covalent bonds in which the elements share some of the outer electrons and then is a dative covalent bond. This is a bond that gives the elements a special kind of group and power in relation to the strength when attempting to break it up.

Answer is: covalent bond.

Covalent bond is bond between nonmetals. Carbon (C) and oxygen (O) are nonmetals.

Carbon atom and oxygen atom are connected by a triple bond (six shared electrons in three bonding molecular orbitals) that is formed of two covalent bonds and one dative covalent bond.

Dative covalent bond is formed by two electrons derive from the oxygen atom.

Carbon monoxide is a colorless, odorless, toxic and tasteless gas.

What was the significance of the smog in Donora & London ?

a. People stopped burning coal to heat their homes

b. The public became aware of air pollution

c. Clean air acts were implemented.

d. Both B and C are correct

Answers

d is the correct answer

A triacylglycerol is composed of 3 glycerol molecules joined to a fatty acid.
a. True
b. False

Answers

False
1 glycerol 3 fatty acids, the other way round

Which is an example of a chemical change?
a.the separation of a mixture into its components
b.the separation of a compound into its elements
c.the separation of gases from liquids
d.the separation of air into oxygen, nitrogen, and other components?

Answers

the separation of air into oxygen, nitrogen, and other components?
Final answer:

A chemical change involves the conversion of substances into different substances, as in the separation of a compound into its elements which requires breaking chemical bonds, unlike a physical change.

Explanation:

An example of a chemical change is the separation of a compound into its elements. This process involves breaking chemical bonds and forming new substances with different properties than those of the original compound. For instance, table salt (a compound of sodium and chlorine) cannot be separated into sodium and chlorine by physical means like filtering or distillation; it requires a chemical process. In contrast, physical changes, such as the separation of a mixture or the condensation of steam, do not produce new substances and are reversible.

Burning of gasoline and the souring of milk are also examples of chemical changes, where original substances are transformed into new ones, such as carbon dioxide and water from gasoline, and denatured proteins and produced acid from milk.

A classic chemical change can be observed when natural gas is burned in a furnace, converting methane and oxygen into water and carbon dioxide, signifying not just a visual change but a molecular transformation as well.

What type of substance would result from the bonding of elements carbon and chlorine?

Select one:
a. None of the answer choices
b. Ionic
c. Metallic
d. Covalent

Answers

d........................

Ionic bonds are strong; therefore, ionic compounds

Answers

You've got it right. Sources: Wikipedia
https://en.wikipedia.org/wiki/Ionic_bonding
Other Questions
If the economy is in short-run equilibrium at y1 in panel a the economy is in Describe the history and evolution of the juvenile justice system in the western world, and list the six categories of children recognized by the laws of most states. Find the product? Im in desperate need of a little help. ____________ seems to foster a more positive, coherent early self-concept. question 18 options: early birth order a warm, sensitive parentchild relationship permissive parenting authoritarian parenting What portion of the molecule in model 1 is responsible for the "-lipid" part of the name? Question 12 information reference tables look at each expression. is it a factor of 8x4 + 2x2 45 when this expression is fully factored? select yes or no for expressions a d.a. 2x2 + 3 yes nob. 2x2 + 5 yes noc. 2x 3 yes nod. 4x2 9 yes no In a spreadsheet, there are many features that help you edit quickly. True False What was the danger work in the factory 1800? Read the following scenario. Imagine you are at the laundry mat and you see these directions. 1. Use credit card or cash to purchase tokens. Machines do not accept coins. 2. Choose a washing machine. Select water temperature, water level, and type of cycle (gentle, permanent press, or regular) before entering tokens. 3. Once water is flowing, add detergent, then items to be washed. 4. The washing machine lid must be closed before the cycle will begin. 5. Do not open washers until the blue light goes off at the end of the cycle. According to those directions, which of the following is true?Detergent should be added before the water begins to flow.Tokens need to be entered before water level and other settings can be selected.When the blue light is illuminated, it is okay to open the washer.Tokens are needed to operate the washing machines. Complete the conversation: Vctor: Qu piensas de los deportes? Emily: _________ que es muy sano hacer deporte. PensarPiensasPensamosPienso which branch of gov would be responsible for passing a law banning homework ? When tybalt says he is after romeo, mercutio tries to deflect tyablt's anger to himself. why? in terms of newtons 3rd law of motion desribe this picture.Newton's third lawis: For every action, there is an equal and opposite reaction. Identify three factors that characterize aquatic systems. How can your health be improved by decreasing your intake of concentrated sweets? ????????????????????? jeremy approaches three people who do not want to buy any plants however they wish to donate money for the fundraiser when Jeremy delivers the plants one week later. if the people promise to donate a total of $14.40, what will be the average cash donation? combining like terms simplify each expression-v + 12v Does the amplitude range increase or decrease when the person stands When a firm competes in a relatively small geographically defined specific area, it is using a(n) _______ strategy? Steam Workshop Downloader