When scientists use one of their five senses to gather information, they are A. making an observation. B. making an inference. C. predicting a relationship D. drawing a conclusion.

Answer:

C

Explanation:

Gallium is in group thirteen with outermost electron configuration ns2 np1. The highest occupied sub-level is np1 having only one electron which is the situation required in the question.

Answer:

C.  Ga

Explanation:

Answer:

Same particles (electrons) were emitted even after changing the cathode material.

Explanation:

In his famous experiment, Thompson tested the properties of atomic particles. He used a cathode ray tube to apply voltage on the cathode. This generated beam of electrons, also called cathode rays. He bombarded the rays on phosphorus on the other end of the tube, to observe the pathway it took.  

When he noticed the deflection of cathode rays when it passes through the electric and magnetic field, he repeated the experiment by changing the cathode material. To his surprise, rays emitted from all the materials exhibited the same behavior.

He concluded that these rays comprising of electrons, are a fundamental part of atoms of every element.  

Answer:

B. The starting temperature of the water in each cup  

Explanation:

Cindy is trying to see if foam or ceramic is a better insulator. Those are her independent variables.

The other variables , like the starting temperature of the water in each cup, must be controlled variables. If she uses different starting temperatures in each cup, she won't know if it was the temperature or the materials that caused her results.

A. is wrong. The thermometers should be identical but, if they aren't, it will make little difference in the results.

C. is wrong. The ending temperature is room temperature, so it is automatically the same for each cup.

D. is wrong. She is trying to measure the effect of different materials.

Answer:the answer is B(the starting temperature of the water in each cup)

Explanation:

Answer:

The ranking is given as; Water > Asphalt > Concrete > glass > Iron

Explanation:

The trick in solving this question is to assume a constant heat value; in this case i'll be choosing 100 J. Use this value to solve for the temperature difference. from that we can be able to rank the samples in order of their temperatures.

The formular to be used here is the;

H = MCΔT

Where;

H = Heat

M = Mass

C = Heat Capacity

ΔT = Temperature difference

ΔT = H/MC

In water;

ΔT = 100 / (10 * 4.184) = 2.39K

In Concrete;

ΔT = 100 / (10 * 0.88) = 11.36K

In asphalt;

ΔT = 100 / (10 * 0.920) = 10.87K

In glass;

ΔT = 100 / (10 * 0.84) = 11.9K

In iron;

ΔT = 100 / (10 * 0.448) = 22.3K

The samples with least temperature difference would have final temperatures and vice versa.

Our ranking is the given as; Water > Asphalt > Concrete > glass > Iron

The ranking from the least final temperature to the greatest is liquid water, asphalt, concrete, glass, iron.

The question involves understanding the concept of specific heat capacity in relation to the final temperature of different materials after the same quantity of heat is transferred. The specific heat capacity (C) is a property that defines how much heat energy is required to raise the temperature of a unit mass of a substance by one degree Celsius. The materials listed are liquid water, concrete, asphalt, glass, and iron, with specific heat capacities of 4.184 J/g°C, 0.88 J/g°C, 0.920 J/g°C, 0.84 J/g°C, and 0.448 J/g°C, respectively.

Given the relationship that the amount of heat (Q) added or removed is directly proportional to the mass (m), specific heat capacity (C), and change in temperature (ΔT), we have Q = mCΔT. With an equal amount of heat transferred and the same mass for each sample, substances with a higher specific heat capacity will experience a smaller change in temperature. Thus, to rank the final temperatures from least to greatest after the equal heat transfer, we should look at the specific heat capacities in reverse order, as a lower specific heat capacity means more temperature change for the same amount of heat.

Iron (C = 0.448 J/g°C), Glass (C = 0.84 J/g°C), Concrete (C = 0.88 J/g°C), Asphalt (C = 0.920 J/g°C), Liquid Water (C = 4.184 J/g°C)

Therefore, the final temperatures of the samples, from least to greatest, will be as follows: iron will have the highest final temperature, followed by glass, concrete, asphalt, and liquid water will have the lowest final temperature.

Answer and Explanation:

In order to predict the feasibility of redox processes, standard electrode potentials are majorly employed. Generally, if the electrode potential for the reaction is positive, it is considered to be feasible. However, some conditions affect this statement

The value of E° talks about the feasibility of the reaction under standard conditions only and says nothing about the reaction rate.

A positive value of E° means, the equilibrium constant K is greater than 1; while a negative value of E° means, that it is less than 1.

The attachment below shows the simple analysis of the feasibility of two different reactions A and B, at standard and non standard conditions respectively.

NOTE: Standard conditions for Redox reaction: 298.15K(Temperature), 1 atm(Pressure), 1.0M(Concentration) for both anode and cathode.

Non standard conditions for Redox reaction: Any of the 3 conditions above are changed, especially the concentration.

Answer:

The answer to your question is letter A

Explanation:

Process

1.- Calculate the molar mass of KNO₃

KNO₃    molecular mass = 39.1 + 14.01 + (3 x 16)

                                        = 39.1 + 14.01 + 48

                                        = 101.11 g

2.- Use a rule of three to find the percent of nitrogen

                            101.11 g of KNO₃  ---------------   100%

                             14.01 g of N        ---------------     x

                             x = (14.01 x 100) / 101.11

                             x = 13.86%

Answer:

44.5 g of Na₂O

Explanation:

The reaction is this one:

2NaCl + MgO  →  Na₂O  +  MgCl₂

Moles of NaCl = Mass / Molar mass

84 g / 58.45 g/m = 1.43 moles

Ratio is 2:1, so if we produce 1 mol of Na₂O, from 2 moles of NaCl; If we have 1.43 moles, we 'll produce the half of moles

1.43 / 2 = 0.72 moles

Molar mass Na₂O = 62 g/m

Mol . molar mass =  0.72 m . 62 g/m = 44.5 g

Answer:

There will be 44.5 grams of sodium oxide (Na2O) produced

Explanation:

Step 1: Data given

Mass of Sodium chloride (NaCl) = 84.00 grams

Magnesium oxide = in excess

Molar mass of NaCl = 58.44 g/mol

Molar mass of sod)ium oxide (Na2O = 61.98 g/mol

Step 2: The balanced equation

2NaCl + MgO → Na2O + MgCl2

Step 3: Calculate moles of NaCl

Moles NaCl = Mass / Molar mass

Moles NaCl = 84.00 grams / 58.44 g/mol

Moles NaCl = 1.437 moles

Step 4: Calculate moles of Na2O

The limiting reactant is NaCl.

For 2 moles NaCl consumed, we need 1 mol MgO to produce 1 mol Na2O and 1 mol of MgCl2

For 1.437 moles of NaCl we'll have 1.437/2 = 0.7185 moles of Na2O

Step 5: Calculate mass of Na2O

Mass Na2O = Moles Na2O * Molar mass Na2O

Mass Na2O = 0.7185 moles * 61.98 g/mol

Mass Na2O = 44.53 grams of Na2O

There will be 44.5 grams of sodium oxide (Na2O) produced

Answer:

[tex]\rho=1.54\ g/cm^3[/tex]

Explanation:

The expression for density is:

[tex]\rho=\frac {Z\times M}{N_a\times {{(Edge\ length)}^3}}[/tex]

[tex]N_a=6.023\times 10^{23}\ {mol}^{-1}[/tex]

M is molar mass of Calcium = 40.078 g/mol

For cubic closest packed structure , Z= 4

[tex]\rho[/tex] is the density

Radius = 197 pm = [tex]1.97\times 10^{-8}\ cm[/tex]

Also, for fcc, [tex]Edge\ length=2\sqrt{2}\times radius=2\sqrt{2}\times 1.97\times 10^{-8}\ cm=5.572\times 10^{-8}\ cm[/tex]

Thus,  

[tex]\rho=\frac{4\times \:40.078}{6.023\times \:10^{23}\times \left(5.572\times 10^{-8}\right)^3}\ g/cm^3[/tex]

[tex]\rho=\frac{160.312}{10^{23}\times \:6.023\left(10^{-8}\times \:5.572\right)^3}\ g/cm^3[/tex]

[tex]\rho=\frac{160.312}{10^{23}\times \:1.04195E-21}\ g/cm^3[/tex]

[tex]\rho=\frac{160.312}{104.19483}\ g/cm^3[/tex]

[tex]\rho=1.54\ g/cm^3[/tex]

The density of solid calcium can be calculated by determining the density of its unit cell using the face-centered cubic (FCC) structure. The mass and volume of the unit cell can be calculated using the atomic radius and atomic mass of calcium. Dividing the mass by the volume gives the density of solid calcium.

The density of solid calcium can be calculated by determining the density of its unit cell, which is a face-centered cubic (FCC) structure. In an FCC structure, each unit cell contains 4 atoms. The mass of 4 calcium atoms can be calculated using the atomic mass of calcium, and the volume of the unit cell can be calculated using the atomic radius of calcium. Dividing the mass by the volume gives the density of solid calcium.

The atomic radius of calcium is given as 197 pm, which can be converted to cm by multiplying by 10^-10. The volume of the unit cell can be calculated using the formula V = (edge length)^3. The edge length can be calculated using the diagonal of the face, which is 4 times the atomic radius. The mass of 4 calcium atoms can be calculated using the atomic mass of calcium, which is 40.08 g/mol. Dividing the mass by the volume gives the density of solid calcium.

Density of solid calcium = mass of 4 Ca atoms / volume of unit cell

Keywords: density, solid calcium, unit cell, face-centered cubic (FCC) structure, atomic radius, atomic mass

https://brainly.com/question/14325658

#SPJ11

The molarity of the 360mg aspirin sample dissolved in 200mL solution is found to be 0.01 M. As molarity is a measure of concentration, it remains the same in a 50mL sample of the solution. Therefore, the molarity of the aspirin in the 50mL solution is also 0.01 M.

To calculate the molarity of the aspirin in a 50mL sample, first the molarity of the original 200mL solution is calculated. The molarity (M) is defined as moles of solute (in this case aspirin) per liters of solution. The moles of aspirin in the 360mg sample can be calculated by dividing by the molar mass of aspirin, which is 180g/mol. Thus, there are 0.002 mol (360mg * 1g/1000mg * 1 mol/180g) of aspirin in the 200mL solution. Converting mL to L (200mL * 1L/1000mL), the molarity of the 200mL solution is 0.002 mol / 0.2 L = 0.01 M.

Since molarity is a concentration, it remains the same regardless of the volume of the solution: thus, the molarity of the 50mL sample of the solution is also 0.01 M. So, the molarity of aspirin in a 50mL sample of the solution is 0.01 M.

https://brainly.com/question/8732513

#SPJ12

Answer:

The answer to your question is 15.7 amu

Explanation:

                          Abundance               Mass

Isotope 1                30%                         15

Isotope 2               70%                          16

Average atomic mass = (Abundance isotope 1 x abundance) +

                                       (Abundance isotope 2 x abundance)

Substitution

Average atomic mass =  (0.30 x 15) + (0.70 x 16)

Simplify

Average atomic mass = 4.5 + 11.2

Result

Average atomic mass = 15.7 amu

Answer:

Presence of lone pairs of electrons

Explanation:

According to VSEPR theory, the presence of lone pairs caused increased repulsion of electron pairs on the valence shell of the centeral atom of the molecule. This decreases or distorts the bond angle. The decrease in bond ange depends on the number of lone pairs present on the valence shell of the central atom of the molecule. Ammonia has only one lone pair hence the bond angle is 107°, water has two lone pairs and the bond angle is 104°. Compare this this with the bond angle of 109° in methane which has only bond pairs and no lone pairs.

The decrease in bond angles from CH4 to NH3 to H2O is due to increasing number of lone pairs on the central atom which cause greater repulsion and smaller bond angles, as per the VSEPR theory.

According to the Valence shell electron-pair repulsion (VSEPR) theory, the progressive decrease in the bond angles in the series of molecules CH4, NH3, and H2O is best accounted for by the presence and arrangement of lone electron pairs on the central atom. CH4 has no lone pairs on the central carbon atom and has a tetrahedral shape with bond angles of 109.5°. In NH3, the nitrogen atom has one lone pair, which decreases the bond angle to less than 109.5°. In H2O, the oxygen atom has two lone pairs, leading to an even smaller bond angle of 104.5°. The VSEPR theory predicts that the electron pairs will arrange themselves to minimize repulsion, and the lone pair-lone pair repulsion is greatest, followed by lone pair-bonding pair, and finally, bonding pair-bonding pair repulsion is the least.

https://brainly.com/question/17177984

#SPJ2

There are 1.25 moles of oxygen atoms in 20 g of O2, calculated by converting the mass to moles using the molar mass.

To determine the number of moles of oxygen atoms in 20 g of [tex]\(O_2\)[/tex], we first need to find the molar mass of [tex]\(O_2\)[/tex]. Oxygen [tex](\(O\))[/tex] has an atomic mass of approximately 16 g/mol. Since [tex]\(O_2\)[/tex] molecules contain two oxygen atoms, the molar mass of [tex]\(O_2\) is \(2 \times 16 \, \text{g/mol} = 32 \, \text{g/mol}\).[/tex]

Next, we use the formula:

[tex]\[ \text{Number of moles} = \frac{\text{Mass}}{\text{Molar mass}} \][/tex]

Substituting the given mass of [tex]\(20 \, \text{g}\)[/tex] and the molar mass of [tex]\(O_2\) (\(32 \, \text{g/mol}\)):[/tex]

[tex]\[ \text{Number of moles} = \frac{20 \, \text{g}}{32 \, \text{g/mol}} \][/tex]

[tex]\[ \text{Number of moles} = 0.625 \, \text{mol} \][/tex]

Since each molecule of [tex]\(O_2\)[/tex] contains 2 oxygen atoms, the number of moles of oxygen atoms is twice the number of moles of [tex]\(O_2\)[/tex]:

[tex]\[ \text{Number of moles of oxygen atoms} = 2 \times 0.625 \, \text{mol} = 1.25 \, \text{mol} \][/tex]

Therefore, there are [tex]\(1.25 \, \text{mol}\)[/tex] of oxygen atoms in [tex]\(20 \, \text{g}\)[/tex] of [tex]\(O_2\)[/tex].

The question probable maybe:

How many moles of oxygen atoms are there in 20 g of O2?

Answer:

type 2 diabetes

insulin

Explanation:

type 2 diabetes is a chronic condition that affects the way the body processes blood sugar. A patient with type 2 diabetes in the body either doesn't produce enough insulin, or it resists insulin.

As Chromium levels can be below normal in people with type 2  diabetes. Research studies shows that taking drugs that contains chromium such as chromium picolinate can help increase the effectiveness of insulin levels and help insulin work in people with type 2 diabetes.

Answer:

Capable of bonding to surfaces with the application of light pressure is a chemical reaction.

Explanation:

Here, bonding occurs . Bonding results in destruction of old bond and formation of new bonds.Hence new substance with completely different properties is formed. These changes occur only in a chemical reaction .

In physical processes no new substance is formed (no bonding).So,no change in properties of a substance . ]

This process (capability of bonding to surfaces with the application of light pressure) results in chemical reaction.

This type of substances are called Pressure-sensitive Adhesives.(PSA)

Answer:

a

Explanation:

Group 15 form trihydrides with the non metal atoms like phosphine, ammonia

Answer: If all of the carbon atoms are linked by single covalent bonds and there are no branches, the compounds are called homologous series.

Explanation:

A series of carbon atoms which include different number of carbon atoms but have same functional group are known as homologous series.

Generally, these type of series have a chemical formula as [tex]C_{n}H_{2n+2}[/tex].

No branches are present in this type of series.

For example, [tex]CH_{4}[/tex], [tex]C_{2}H_{6}[/tex], [tex]C_{3}H_{8}[/tex] etc are all homologous series.

Thus, we can conclude that if all of the carbon atoms are linked by single covalent bonds and there are no branches, the compounds are called homologous series.

Answer:

The product of the reaction between a ketone and an alcohol is initially a hemiketal which yields a ketal on further reaction with another alcohol molecule.

The structure is found in the attachment.

Explanation:

This reaction is a nucleophilic addition to the carbonyl group. In organic chemistry, a nucleophilic addition reaction is an addition reaction where a chemical compound with an electron-deficient or electrophilic double or triple bond, a pi (π) bond, reacts with electron-rich reactant, termed a nucleophile, with the elimination of the double bond and creation of two new single, or sigma (σ), bonds.

In the reaction between a ketone and an alcohol, the carbonyl group of the ketone serves as the electrophile while the hydroxyl group of the alcohol is the nucleophile. The first product is known as a hemiketal because a single alcohol group has been aded to the carbonyl group of the ketone. Further nucleophilic additon of an alcohol group initiated by the presence of an acid e.g hydrochloric acid, results in the formation of a ketal which has two alcohol group added to the original ketone.

Final answer:

The reaction between a ketone and an alcohol can produce a hemiketal or ketal, depending on the reaction conditions and the excess of alcohol. A hemiketal is formed when the alcohol reacts with the ketone to form a new carbon-oxygen bond, while a ketal is formed when a second molecule of alcohol reacts to convert the hemiketal into a stable compound.

Explanation:

In the reaction between a ketone and an alcohol, the product formed is called a hemiketal or ketal, depending on the reaction conditions and the presence of excess alcohol. A hemiketal is formed when the alcohol reacts with the ketone to form a new carbon-oxygen bond, while a ketal is formed when a second molecule of alcohol reacts to convert the hemiketal into a stable compound.

For example, if we take the ketone acetone (CH3C=O) and react it with ethanol (CH3CH2OH), we can form a hemiketal:

CH3C(OC2H5)(OH)

If we add excess ethanol, the hemiketal can react with a second molecule of ethanol to form a ketal:

CH3C(OC2H5)2

The reaction can also occur between other ketones and alcohols, resulting in the formation of different hemiketals or ketals.

Final answer:

Positive ions, which form the nucleus, are considered fixed during the electrons’ oscillations due to their significantly larger mass, which makes them relatively stationary compared to the lightweight and mobile electrons. In atomic models, this assumption simplifies the study of electronic behavior.

Explanation:

Positive ions can be considered to be fixed during the electrons’ oscillations because of their relatively large mass compared to electrons. In the context of atomic physics and the Bohr model, positive ions are essentially the nucleus of an atom, which is comprised of protons and neutrons. These particles are much heavier than the electrons and thus remain relatively stationary when the electrons oscillate or move in their orbits.

Within the atom, cations, which are positive ions, are created when elements lose one or more electrons. For example, group 1 elements in the periodic table lose one electron easily due to their electronic configuration, leading to a positive charge. The difference in mass means that while the electrons, which are lightweight and mobile, can oscillate or change their energy states quickly, the heavier protons in the nucleus (the cations) do not move significantly during these processes. Consequently, in many atomic models and explanations of electronic behavior, the positive ions are often treated as if they are fixed in place.

Answer:

The correct answer is 15.

Explanation:

The driving test must be passed with more than 200 points. This means that you can only make a maximum of 15 mistakes to pass the test. This is possible as long as no critical mistakes are made, which are enough to fail the test. These critical mistakes are for example driving faster than allowed, too slow, driving distracted, etc.

Have a nice day!

Answer:

There is 26.58 grams of gold formed

Explanation:

Step 1: Data given

17.6 A of current are passed through a gold solution for 37.0 min

Molar mass of Au = 196.967 g/mol

Step 2: The equation

Au^3+ + 3e- → Au

Step 3: Calculate coulombs

17.6 Coulomb/s * 37.0 min * 60 sec/min = 39072 Coulombs

1 Faraday = 96500 Coulombs

Step 4: Calculate faraday

39072 Coulombs / 96500 Coulombs / Faraday = 0.40489 Faraday

Step 5: Calculate mass of gold formed

For every 3 Faraday of electricity used up , 1 mole Au is formed

0.40489 Faraday * 1 mole Au/ 3 Faraday = 0.13496 mole Au

196.967 g/mol * 0.13496 mol = 26.58 g Au

There is 26.58 grams of gold formed

The mass of gold that is produced is 26.59 g

Using the formula

[tex]m = \frac{Atomic\ mass}{nF}\times It[/tex]

Where m is the mass

n is the number of equivalents

F is the Faraday constant ( F = 96485 C)

I is the current

and t is the time

From the given information

I = 17.6 A

t = 37.0 min = 37.0 × 60

t = 2220 secs

For gold

Atomic mass = 196.97 g/mol

and n = 3

Putting these parameters into the formula, we get

[tex]m = \frac{196.97}{3 \times 96485} \times 17.6 \times 2220[/tex]

[tex]m = \frac{7696011.84}{289455}[/tex]

m = 26.59 g

Hence, the mass of gold that is produced is 26.59 g

Learn more here: https://brainly.com/question/9693379

Answer: surface tension

Explanation: the tiny weight of insect is not strong enough to break the surface tension of water. So when insects stands or move on water, their feets creates something like dimples on the surface of water which then spring back to propel the insect forward thereby preventing them from sinking.

Answer:

Molar concentration: 0,0489M

Explanation:

In this titration of Cu²⁺ you add an excess of I⁻ that reacts with Cu²⁺ producing I₂, this I₂ reacts with Na₂S₂O₃. If you know the I₂ that reacts with Na₂S₂O₃ you can know the I⁻ that reacts with Cu²⁺ and, thus, the quantity of Cu²⁺. The reactions are:

2Cu²⁺ + 4I⁻ → 2CuI + I₂

I₂ + 2S₂O₃⁻ → S₄O₆ + 2I⁻

Moles of S₂O₃⁻ are:

0,01305L×0,15M = 1,96x10⁻³ moles of S₂O₃⁻.

Moles of I₂ are:

1,96x10⁻³ moles of S₂O₃⁻× ( 1 mole of I₂ /  2 moles of S₂O₃⁻) = 9,79x10⁻⁴ moles of I₂

Moles of Cu²⁺ are:

9,79x10⁻⁴ moles of I₂×( 2 moles of Cu²⁺ / 4 moles of I₂) = 4,89x10⁻⁴ moles of Cu²⁺

As volume of the solution was 10,0mL = 0,0100L, the molar concentration of the original solution is:

4,89x10⁻⁴ moles of Cu²⁺ / 0,0100L = 0,0489M

The unknown concentration of the Cu2+ solution can be found by determining the moles of Na2S2O3 at the equivalence point, using this to calculate the moles of Cu2+ from stoichiometry, and then dividing by the volume of the Cu2+ solution in liters.

In this question, a Cu2+ solution, of unknown concentration, is titrated with 0.15 M Na2S2O3. The Cu2+ solution's concentration can be calculated using the data provided. The titration of this Cu2+ solution is complete, or the equivalence point is reached, when 13.05 mL of Na2S2O3 is added. The reaction that occurs is 2Na2S2O3 + Cu2+ -> CuS2O3 + 2Na+, and from the stoichiometry of the reaction, we know that two moles of Na2S2O3 react with one mole of Cu2+ ion.

Using the moles of Na2S2O3 that reacted (moles = Molarity x Volume (in liters), so moles = 0.15 M x 13.05 mL/1000), we can find out the moles of Cu2+ that were present in the 10 mL sample. We can then calculate the molarity of the Cu2+ solution by dividing the moles of Cu2+ by the volume of the solution in liters (0.01 L).

https://brainly.com/question/31271061

#SPJ11

Answer:

See explanation below

Explanation:

The drawing of the molecule and mechanism, you can see it in the attached pictures.

Now, answering the theorical questions:

The 1-butene is like this:

CH2 = CH - CH2 - CH3

If this molecule reacts with bromine (Br2) the reaction and product formed is:

CH2 = CH - CH2 - CH3 + Br2 -----------> Br-CH2 - CH(Br) - CH2 - CH3

The product formed is called 1,2 - dibromo - butane, and the reaction with halides like bromine is called halogenation. In this case, alkenes halogenation, so, we become a alkene like the 1-butene with a halide like bromine to form an alkane with halides. This reaction is taking place in conditions of Sn1, although this is an addition (Two steps, see picture below for mechanism).

The bromine, has a high electronegativity (2.9) this is even bigger than the iodine (2.7), so, when the bromine acts as a nucleophile in a SN2 or SN1 reaction (like this one),  bromine atom becomes slightly more negative, and iodine atom becomes slightly more positive, so strictly speaking, the molecule is slightly polar. When the difference of the electronegativities is below of 0.4, we can say that the molecule is non-polar.

Because of the explanation above, the reaction is taking place with bromine, because it has a higher electronegativity, even more than the chlorine, so the molecule is more polar and can have a better reaction with the 1-butene than the chlorine. Has a better nucleophyle attack and also, is a great leaving group.

The picture below will show the mechanism:

Answer:

Moles of potassium chlorate = 0.02976 moles

Explanation:

At standard pressure and temperature,

22.4 L of a gas consists of 1 mole

Thus, given, volume of [tex]O_2[/tex] = 1.0 L

So,

1 L of a gas consists of [tex]\frac{1}{22.4}[/tex] mole

Moles of oxygen gas = 0.04464 moles

The reaction is shown below as:-

[tex]2KClO_3\rightarrow 2KCl+3O_2[/tex]

3 moles of oxygen gas are produced when 2 moles of potassium chlorate undergoes reaction.

So,

1 mole of oxygen gas are produced when [tex]\frac{2}{3}[/tex] moles of potassium chlorate undergoes reaction.

Thus,

0.04464 mole of oxygen gas are produced when [tex]\frac{2}{3}\times 0.04464[/tex] moles of potassium chlorate undergoes reaction.

Moles of potassium chlorate = 0.02976 moles

From the decomposition reaction 2KClO₃(s) → 2KCl(s) + 3O₂(g), the number of moles of KClO₃ to be decomposed to generate 1.0 L of O₂ gas at standard temperature and pressure (STP) is 0.030.

The balanced chemical reaction for the decomposition of potassium chlorate (KClO₃) is the following:

2KClO₃(s) → 2KCl(s) + 3O₂(g)   (1)

We can find the number of moles of O₂ gas with the Ideal gas equation:

[tex] PV = nRT [/tex]

Where:

P: is the pressure = 1.0 atm (at STP conditions)

V: is the volume = 1.0 L

R: is the gas constant = 0.082 L*atm/(K*mol)

T: is the temperature = 273 K (at STP conditions)

n: is the number of moles =?

The number of moles of O₂ gas is:

[tex] n_{O_{2}} = \frac{PV}{RT} = \frac{1.0 atm*1.0 L}{0.082 L*atm/(K*mol)*273 K} = 0.045 \:moles [/tex]

From reaction (1), we have that 2 moles of KClO₃ produce 3 moles of O₂, so the number of moles of KClO₃ resulting from the decomposition is:

[tex] n_{KClO_{3}} = \frac{2\:moles\:KClO_{3}}{3\:moles\:O_{2}}*0.045\:moles\:O_{2} = 0.030 \:moles [/tex]

Therefore, the number of KClO₃ moles to be decomposed is 0.030.

Find more here:

https://brainly.com/question/4147359?referrer=searchResults

I hope it helps you!                  

Answer:

Scientists have been debating over light being a wave or particle since its recognition.

Sir Issac Newton discovered that light had frequency and other properties. Newton described light to be a particle because it created shadows which were sharp and very clear.

Francesco Maria Grimaldi, claimed that light was a wave. This was because this scientist observed the diffraction of light and hence, claimed light to be a type of wave.

The speed of light is 299 792 458 m / s. Nothing can travel faster than light.

The question is incomplete, here is a complete question.

Calculate the standard entropy of vaporization of ethanol at its boiling point 352 K. The standard molar enthalpy of vaporization of ethanol at its boiling point is 40.5 kJ/mol.

Answer : The standard entropy of vaporization of ethanol is, 115 J/mol.K

Explanation :

Formula used :

[tex]\Delta S=\frac{\Delta H_{vap}}{T_b}[/tex]

where,

[tex]\Delta S[/tex] = change in entropy

[tex]\Delta H_{vap}[/tex] = change in enthalpy of vaporization = 40.5 kJ/mol

[tex]T_b[/tex] = boiling point temperature = 352 K

Now put all the given values in the above formula, we get:

[tex]\Delta S=\frac{\Delta H_{vap}}{T_b}[/tex]

[tex]\Delta S=\frac{40.5kJ/mol}{352K}[/tex]

[tex]\Delta S=\frac{40.5\times 10^3J/mol}{352K}[/tex]

[tex]\Delta S=115J/mol.K[/tex]

Therefore, the standard entropy of vaporization of ethanol is, 115 J/mol.K

Answer:

1.90 L

Explanation:

Using Boyle's law  

[tex]{P_1}\times {V_1}={P_2}\times {V_2}[/tex]

Given ,  

V₁ = 595 L  

V₂ = ?

P₁ = 1.00 atm

P₂ = 55.0 atm

Using above equation as:

[tex]{P_1}\times {V_1}={P_2}\times {V_2}[/tex]

[tex]{1.00}\times {595}={55.0}\times {V_2}[/tex]

[tex]{V_2}=\frac{{1.00}\times {595}}{55.0}\ L[/tex]

[tex]{V_2}=1.90\ L[/tex]

The volume would be 1.90 L.

Answer:

5.8 g of carbon dioxide are produced

Explanation:

The Law of Conservation of Mass states that the mass of the reactants must equal the mass of the products in all chemical reactions.

This is the chemical reaction (combustion)

 CH₄     +   2O₂    →    CO₂   +    2H₂O

12.2 g        14 g             x             20g

Mass in reactants = 12.2 g + 14 g = 26.2 g

Mass in products =  x + 20 g

26.2 g = x + 20g

26.2 g - 20g = x

5.8 g = x

Answer:

28.16 °C

Explanation:

Considering that:-

Heat gain by water = Heat lost by metal

Thus,  

[tex]m_{water}\times C_{water}\times (T_f-T_i)=-m_{metal}\times C_{metal}\times (T_f-T_i)[/tex]

Where, negative sign signifies heat loss

Or,  

[tex]m_{water}\times C_{water}\times (T_f-T_i)=m_{metal}\times C_{metal}\times (T_i-T_f)[/tex]

For water:

Mass = 165 g

Initial temperature = 28 °C

Specific heat of water = 4.184 J/g°C

For metal:

Mass = 4.00 g

Initial temperature = 75 °C

Specific heat of water = 0.600 J/g°C

So,  

[tex]165\times 4.184\times (T_f-28)=4.00\times 0.600\times (75-T_f)[/tex]

[tex]690360\left(T_f-28\right)=2400\left(75-T_f\right)[/tex]

[tex]692760T_f=19510080[/tex]

[tex]T_f = 28.16\ ^0C[/tex]

Hence, the final temperature is 28.16 °C

Answer: Christine Herman & L.G Wade Jr., "2010". Organic Chemistry: Reaction of Alkane, 7e, Pearson Education, Radford University, Radford, VA.

Explanation:

This is an edited book. The Harvard reference style was used in the following order:

Authors name

Year of publication

Title

Edition

Publisher

Place of publication.

Note that the title of book should be italicized with capitalization of first word.