When comparing elements in the same column of the periodic table, which factor- distance or the number of protons seems to be the dominant factor?

To solve this problem, we must be given first the density of air at 20 degrees Celsius. Looking up online, this is equal to:

density air (20C) = 0.0012041 g/mL

so that the volume is:

volume balloon = 0.57 g / (0.0012041 g/mL)

volume balloon = 473.38 mL

Answer:

[tex]C= 44.12%[/tex] % of C

Explanation:

Hi, the empirical formula of the pentaerythritol is {tex]C_5H_{12}O_4[/tex]

The molecular weights are:

[tex]M_C=12 g/mol[/tex]

[tex]M_H=1 g/mol[/tex]

[tex]M_O=16 g/mol[/tex]

Due to the empirical formula in 1 mol of pentaerythritol you have 5 mol of C, 12 mol of H and 4 mol O

Taking a calculation base of 1 mol:

[tex]m_C=12 g/mol*5mol[/tex]

[tex]m_C=60 g[/tex]

[tex]m_H=1 g/mol*12mol[/tex]

[tex]m_H=12 g[/tex]

[tex]m_O=16 g/mol*4mol[/tex]

[tex]m_O=64 g[/tex]

The total weight will be:

[tex]m_{tot}=64 g +12 g +60 g= 136 gl[/tex]

The C%:

[tex]C= \frac{m_C}{m_{tot}}*100%[/tex]

[tex]C= \frac{60g}{136g}*100%[/tex]

[tex]C= 44.12%[/tex]

Answer:

decrease the room temperature by 26°F

F=95(K−273)+32 .

Given 21 grams each of Lithium (Li) and Nitrogen (N2), the maximum mass of Lithium Nitride (Li3N) that can be produced is 52.5 grams.

The chemical reaction between Lithium (Li) and Nitrogen (N2) can be represented as:

6Li + N2 → 2Li3N

From this balanced chemical equation, it is clear that 6 moles of Li react with 1 mole of N2 to produce 2 moles of Li3N. Given that the molar mass of Li is 7 g/mol and that of N2 is 28 g/mol, if we have 21 g each of Li (3 moles) and N2 (0.75 moles), the limiting reactant is N2 because we have fewer moles of N2 compared to Li according to the stoichiometry of the reaction.

Because N2 is our limiting reactant, we can only produce a stoichiometrically equivalent amount of Li3N based on the moles of N2. Thus, for every mole of N2, we produce 2 moles of Li3N. Therefore, if we have 0.75 moles of N2, we could produce 1.5 moles of Li3N. Given that the molar mass of Li3N is 35 g/mol, the maximum mass of Li3N that can be produced is 52.5 g.

https://brainly.com/question/33417913

#SPJ11

The distribution coefficient of caffeine in this solvent system is approximately 0.579.

The distribution coefficient of caffeine in this solvent system can be calculated using the formula:

Distribution Coefficient = Mass of Caffeine in Methylene Chloride / Mass of Caffeine in Water

From the given information, we know that approximately 1.0g of caffeine dissolves in 28ml of methylene chloride and in 46ml of water. Therefore, the distribution coefficient can be calculated as:

Distribution Coefficient = 1.0g / 28ml / (1.0g / 46ml) ≈ 0.579

Isopentane is a branched-chain alkane with unique properties compared to pentane and neopentane.

Isopentane is a branched-chain alkane with the molecular formula C5H12. It is one of the isomers of pentane, along with neopentane. These isomers have different properties, such as boiling points: pentane (36.1°C), isopentane (27.7°C), and neopentane (9.5°C).

Answer : The mass of human blood in grams and ounce are 5830 grams and 205.647 ounce.

Explanation :

Density : It is defined as the mass contained per unit volume.

Formula used for density :

[tex]Density=\frac{Mass}{Volume}[/tex]

Given :

Density of human blood = 1.06 g/mL

Volume of human blood = 5.5 L = 5500 mL

conversion used : 1 L = 1000 mL

Now put all the given values in the above formula, we get the mass of human blood.

[tex]1.06g/mL=\frac{Mass}{5500mL}[/tex]

[tex]Mass=5830g[/tex]

The mass of human blood in grams = 5830 grams

Conversion used :

[tex]1\text{ ounce}=28.3495g\\\\1g=\frac{1}{28.3495}\text{ ounce}[/tex]

As, [tex]1g=\frac{1}{28.3495}\text{ ounce}[/tex]

So, [tex]5830g=\frac{5830g}{1g}\times \frac{1}{28.3495}\text{ ounce}=205.647\text{ ounce}[/tex]

Therefore, the mass of human blood in grams and ounce are 5830 grams and 205.647 ounce.

Final answer:

In an experiment with a 2.00-g sample of CaO reacting to form 2.14 g of Ca(OH)₂, the percent yield is calculated as more than 100%, suggesting an error in measurement or theoretical yield assumptions.

Explanation:

In this experiment, a 2.00-g sample of CaO is reacted with excess water to produce Ca(OH)₂, and 2.14 g of Ca(OH)₂ is recovered. To calculate the percent yield of this reaction, we first need to understand that percent yield is calculated using the formula: percent yield = (actual yield/theoretical yield) x 100%. However, to calculate the percent yield in this case, we will presuppose that under ideal conditions, the reaction of the 2.00 g of CaO would yield an equivalent molar amount of Ca(OH)₂.

Without going into detailed stoichiometry and assuming perfect conversion, the amount ofCa(OH)₂ produced directly mirrors the starting amount of CaO due to the 1:1 molar ratio in the reaction CaO + H2O = Ca(OH)₂. If 2.14 g of Ca(OH)2 is the actual yield and we accept the theoretical yield as 2.00 g (for simplicity, and acknowledging that the real theoretical yield would require molar mass calculations), the percent yield can be calculated as follows: percent yield = (2.14 / 2.00) x 100% = 107%.

The calculation example here demonstrates the concept of percent yield but importantly highlights that a yield over 100% indicates a discrepancy, possibly in measurement or assumption of theoretical yield without correct stoichiometric calculation.

When the candy is burned, the heat transferred to the water is 13500 small calories. Consequently, there are 135 dietary Calories (Cal) per gram of the candy, calculated from the temperature change and the mass of the water and candy.

To calculate the number of Calories per gram of candy based on a calorimetry experiment, we use the concept of specific heat capacity. The specific heat capacity of water is typically 4.184 J/g°C (or 1 cal/g°C). Given that 1,000 small calories are equivalent to one large calorie (also known as the dietary Calorie), we can determine the amount of heat transferred to the water in Calories and then divide by the mass of the candy.

We'll apply the formula: Heat (q) = mass (m) × specific heat capacity (c) × temperature change (ΔT), then convert joules to Calories and determine the Calories per gram of candy.

Let's calculate: mass of water = 1.00 kg = 1000 g, specific heat capacity of water = 1 cal/g°C, initial temperature = 21.0 °C, final temperature = 34.5 °C. Heat (q) = (1000 g) × (1 cal/g°C) × (34.5 °C - 21.0 °C) = 1000 g × 1 cal/g°C × 13.5 °C = 13500 cal. This is the heat absorbed by the water, which is the heat released by burning the candy. To find the Calories per gram of candy, we then divide this value by the mass of the candy: Calories/g = 13500 cal / 0.100 g = 135000 cal/g = 135 Cal/g.

First get the sum of the mass of each substance.

total mass = 3.50 g + 4.80 g + 7.20 g

total mass = 15.50 g

The percentage mass would be:

% mass = (7.20 g / 15.50 g) * 100%

% mass = 46.45%

"The correct answer is A. Sediments.

Weathering is the process by which rocks are broken down into smaller particles and altered chemically by the action of water, wind, and temperature changes. This process occurs in situ, meaning it happens where the rock is located, without any transport of the material. The products of weathering include soil, ions in solution, and small particles known as sediments. These sediments can be transported by agents such as water, wind, ice, or gravity to other locations where they may eventually form sedimentary rocks.

Let's consider the other options:

B. Ash - Ash is typically the product of volcanic eruptions and is composed of fragmented rock and glass particles that are ejected into the atmosphere during an eruption. It is not formed by weathering.

C. Minerals - Minerals are naturally occurring inorganic solids with a definite chemical composition and crystal structure. They are the building blocks of rocks and can be altered by weathering, but they are not created by the weathering process itself.

D. Magma - Magma is molten rock that is found beneath the Earth's surface. It can contain crystals, dissolved gases, and sometimes even bits of solid rock. Magma is formed by the melting of existing rock within the Earth's mantle or crust, not by weathering.

Therefore, the most accurate answer to the question of which is made by weathering is A. Sediments."

The complete dissolution of 0.025 M [tex]\rm K_2CO_3[/tex] will result in 0.050 M [tex]\rm K^+[/tex].

The complete dissolution of [tex]\rm K_2CO_3[/tex] will result in:

[tex]\rm K_2CO_3\;\rightarrow\;2\;K^+\;+\;CO_3^2^-[/tex]

1 molecule of [tex]\rm K_2CO_3[/tex] will gives 2 molecules of [tex]\rm K^+[/tex].

So 0.025 M [tex]\rm K_2CO_3[/tex] will give: 1 M

0.025 M [tex]\rm K_2CO_3[/tex] = [tex]\rm 0.025\;\times\;2\;K^+[/tex] M

= 0.05 M [tex]\rm K^+[/tex].

Thus the complete dissolution of 0.025 M [tex]\rm K_2CO_3[/tex] will result in 0.050 M [tex]\rm K^+[/tex]

For more information, refer to the link:

https://brainly.com/question/788696

To calculate the volume in milliliters of glycerin with a mass of 0.75 lbs, first convert the mass to kilograms, then use the specific gravity of glycerin (1.26) to find its density and divide the mass by this density to get the volume, which is then converted from cubic meters to milliliters.

To calculate the volume of glycerin in milliliters with a mass of 0.75 lbs, we need to use the specific gravity and the relationship between mass, density, and volume. The specific gravity of glycerin is given as 1.26, which means glycerin is 1.26 times denser than water at the same temperature and pressure. The density of water is approximately 1 g/cm³ or 1000 kg/m³.

To find the density of glycerin, we multiply the specific gravity by the density of water: density of glycerin = 1.26 x 1000 kg/m³ = 1260 kg/m³.

Next, we need to convert 0.75 pounds to kilograms, knowing that 1 pound is equivalent to 0.453592 kilograms. Therefore, the mass of glycerin is 0.75 lbs x 0.453592 kg/lbs = 0.340194 kg.

To find the volume in cubic meters, we divide the mass by the density: volume of glycerin = 0.340194 kg / 1260 kg/m³ = 0.00027015 m³.

Finally, to convert cubic meters to milliliters, we use the conversion factor that 1 m³ is equal to 1,000,000 milliliters, resulting in a volume of glycerin of about: 0.00027015 m³ x 1,000,000 mL/m³ = 270.15 mL of glycerin.

FeCl2, or iron(II) chloride, is a strong electrolyte, while HF, or hydrofluoric acid, is a weak electrolyte.

To classify the compounds FeCl2 and HF as strong electrolytes, weak electrolytes, or nonelectrolytes, we first need to understand what these terms mean. An electrolyte is a substance that produces an electrically conducting solution when dissolved in water based on its ability to dissociate into ions.

FeCl2, or iron(II) chloride, is a strong electrolyte. In solution, FeCl2 completely dissociates into iron(II) cations (Fe2+) and chloride anions (Cl-) sustaining an electric current.

HF, or hydrofluoric acid, is a weak electrolyte. This is because it partially dissociates into H+ ions and F- ions in solution, thus conducting electricity less than strong electrolytes.

https//brainly.com/question/33930290

FeCl2 is a strong electrolyte because it dissociates completely in water, and HF is a weak electrolyte as it only partially dissociates in water.

The classification of compounds as electrolytes or nonelectrolytes is based on their ability to conduct electricity when dissolved in water. This depends on whether they dissociate into ions in solution. For the compounds FeCl2 and HF:

https://brainly.com/question/32888859

#SPJ3

The chemical reaction between solution of barium chloride and potassium sulfate will form a precipitate of barium sulfate.

Chemical reactions are defined as reactions which occur when a substance combines with another substance to form a new substance.Alternatively, when a substance breaks down or decomposes to give new substances it is also considered to be a chemical reaction.

There are several characteristics of chemical reactions like change in color, change in state , change in odor and change in composition . During chemical reaction there is also formation of precipitate an insoluble mass of substance or even evolution of gases.

There are three types of chemical reactions:

1) inorganic reactions

2)organic reactions

3) biochemical reactions

During chemical reactions atoms are rearranged and changes are accompanied by an energy change as new substances are formed.

Learn more about chemical reactions,here:

https://brainly.com/question/14929452

#SPJ5

The volume of methimazole solution required to deliver a 25 mg dose of the drug, given a concentration of 6.0 mg/mL, is a little over 4 mL.

The patient needs to receive 25 mg of methimazole that is available at a concentration of 6.0 mg/mL. To calculate the volume, we'll use the simple formula: volume = desired dose / concentration. Therefore, the volume = 25 mg / 6.0 mg/mL, which results in a little more than 4 mL, which is the amount of methimazole solution needed for the patient's dose.

https://brainly.com/question/36537081

#SPJ11

Final answer:

The structural formula for 1-pentanol, an alcohol derived from pentane, is CH3(CH2)3CH2OH, with the OH group attached to the first carbon atom of the pentane chain.

Explanation:

To write the structural formula for 1-pentanol, start by considering the structure of pentane, C5H12. Since 1-pentanol is an alcohol derived by making a substitution on one of the carbon atoms of pentane, you replace a hydrogen on the first carbon with an OH (hydroxyl group). This yields the structural formula for 1-pentanol, which is CH3(CH2)3CH2OH, with the OH group attached to the first (terminal) carbon. 1-Pentanol is an alcohol with its hydroxyl group attached to the end carbon atom in the five-carbon chain. Therefore, the molecule is named as such, and the number 1 in 1-pentanol shows that the hydroxyl group is on the first carbon. The molecular ion mass (M+1) is 102, and this molecule would be a substituted alkane if additional substituents like chlorine were added.

Answer: The precipitate is [tex]Ba_3(PO_4)_2[/tex] and 1 molecule of Barium phosphate and 6 molecules of Potassium nitrate is formed.

Explanation: We are given Barium nitrate and Potassium phosphate , that will lead to the formation of Barium phosphate and Potassium nitrate.

As we know that these solutions are present in water, therefore we will obtain Barium phosphate as a precipitate because Barium phosphate is insoluble in water and Potassium nitrate is soluble in water. Thus the reaction is

[tex]Ba(NO_3)_2(aq.)+K_3PO_4(aq.)\rightarrow Ba_3(PO_4)_2(ppt.)+KNO_3(aq.)[/tex]

To know how many molecules are formed at the end, we need to balance the above equation.

Balancing the equation, we get:

[tex]3Ba(NO_3)_2(aq.)+2K_3PO_4(aq.)\rightarrow Ba_3(PO_4)_2(ppt.)+6KNO_3(aq.)[/tex]

Thus, we get 1 molecule of Barium phosphate as a precipitate and 6 molecules of Potassium nitrate which is easily soluble in water.

Answer:

The barium phosphate is precipitate and 1 molecule is formed.

According to the reaction mentioned,

[tex]\rm \bold { 3BaNO_3_(_a_q_)+ 2K_3PO_4_(_a_q_) \rightarrow Ba_3(PO_4)_2_(_p_p_t_)+ 6 KNO_3_(_a_q_)}[/tex]

We can conclude that, the barium phosphate is precipitate and 1 molecule is formed.

To know more about chemical equation, you can refer to the link:

https://brainly.com/question/16225195?referrer=searchResults

The correct answer is option 3 and 5.

Compounds are made up of a mixture of 2 or more elements such as H₂O or NaCl.

Compounds have physical properties that are constant and hence allow us to identify them. Different physical properties include color, solubility, mass, odor, density, boiling point, melting point etc

Answer:

The correct answers are, "Maintain Original Physical Properties", "Mixture of 2 or More Elements", and "Physical Change"

Explanation:

To find the molar mass of the sugar, rearrange the osmotic pressure formula II = MRT, solve for M (molarity), use the given osmotic pressure and temperature in Kelvin to calculate the molarity, and then use the molarity and given mass of the sugar to find the molar mass.

To find the molar mass of the sugar, we need to rearrange the osmotic pressure formula (II = MRT) to solve for M (molarity). We can use the given osmotic pressure (31.5 mmHg) and temperature (39°C) in Kelvin (312 K) to calculate the molarity.

Then, we can use the molarity and the given mass of the sugar (1.10 g) to find the number of moles. Finally, dividing the mass by the number of moles will give us the molar mass of the sugar, which is approximately 176.1 g/mol.

https://brainly.com/question/34318468

#SPJ12

The correct options are A and B.

The correct ions with noble gas electron configurations are A. [tex]$\mathrm{H}^{-}$[/tex] and B. [tex]$\mathrm{Na}^{+}$[/tex].

The electron configuration of a noble gas is characterized by a completely filled electron shell. Noble gases have electron configurations that end in s²p⁶, where 's' and 'p' represent the electron orbitals. Let's analyze the ions in question:

A. [tex]$\mathrm{H}^{-}$[/tex]: Hydrogen normally has 1 electron in its 1s orbital. However, [tex]$\mathrm{H}^{-}$[/tex] has gained an extra electron, making its electron configuration 1s², which is similar to helium, a noble gas.

B. [tex]$\mathrm{Na}^{+}$[/tex]: Sodium has an electron configuration of [Ne] 3s¹, but [tex]$\mathrm{Na}^{+}$[/tex] loses its 3s¹ electron to become [Ne], which is like a noble gas configuration.

C. [tex]$\mathrm{Br}^{+}$[/tex]: Bromine normally has an electron configuration of [Ar] 3d¹⁰ 4s² 4p⁵. When it loses an electron to form [tex]$\mathrm{Br}^{+}$[/tex], it becomes [Ar] 3d¹⁰ 4s² 4p⁴, which is not a noble gas configuration.

D. [tex]$\mathrm{F}^{+}$[/tex]: Fluorine normally has an electron configuration of [He] 2s² 2p⁵. When it loses an electron to form [tex]$\mathrm{F}^{+}$[/tex], it becomes [He] 2s² 2p⁴, which is not a noble gas configuration.

So, the ions that possess the electron configuration of a noble gas are A. [tex]$\mathrm{H}^{-}$[/tex] and B. [tex]$\mathrm{Na}^{+}$[/tex].

The complete question is here:

Select the ions below which possess the electron configuration of a noble gas.

A. [tex]$\mathrm{H}^{-}$[/tex]

B. [tex]$\mathrm{Na}^{+}$[/tex]

C. [tex]$\mathrm{Br}^{+}$[/tex]

D. [tex]$\mathrm{F}^{+}$[/tex]

The ions Cl-, O2-, H-, and Na+ all have the electron configuration of a noble gas: Cl- matches Argon, O2- matches Neon, H- matches Helium, and Na+ matches Neon.

The question is asking us to identify which ions have the electron configuration of a noble gas. In the periodic table, noble gases have a full outer shell of electrons, typically reaching the stable octet configuration. Let's examine the ions given:

All of these ions indeed match the noble gas configurations; Cl− matches Argon, O2− matches Neon, H− matches Helium, and Na+ matches Neon.

Complete Question: Select the ions below which possess the electron configuration of a noble gas.

Cl−

O2−

H −

Na +