The front surface of the CCD is called the _________
Which four of the following hardware components are used to enable networking and are not part of a standalone computer? NIC protocols hub monitor mouse router switches printers
Answer:
NIC, hub, router, and switches
Explanation:
NIC (or network card) has the function to prepare, send and control data to the network. A network card serves as a physical interface between the computer and the cable. It prepares data output from the computer to the network cable, transfers it to another computer, and controls the flow of data between the computer and cable. It also translates the data coming from the cable and converts it into bytes, so that the computer's Central Unit understands it.Hubs are used to connect the various devices that make up a network, computers, printers, or others. The term hub is used to refer to a network device that connects computers to each other, but in reality it also serves as a repeater, because it passes or repeats all the information it receives to all its ports.A router is a device that connects several normally different segments on a single network. Once a router is turned on, it can make smart decisions about how to get the data to its destination based on the information it gets from the network itself.Switch - Like the hub, the switch connects multiple segments of a network, but with one major difference: while a hub distributes information across all ports simultaneously, the switch establishes a direct link between the sending device and the receiving device. .Describe three ways to protect the computer and all peripheral devices from damage
Here are three ways:
Cleaning: as applied
to most things in our lives, cleaning also applies to protecting peripheral
devices. To ensure the smooth running of such devices one needs to clean the
dust and dirt from these devices once in a while. Make sure you disconnect the
device before you eject it from the system.
Follow instructions: Most devices come with a safety guide
and instructions manual, always use the recommended settings for the smooth
running of your system. These recommendations usually come from the
manufacturer and are reliable.
Surge suppressor/protector: One of the major issues faced by the
users is faults caused by power surges. One needs to make sure to use a Surge Suppressor/Protector
connected with the system to make sure it will not damaged with power fluctuations.
The unique address for a particular web site is the ________.
Most windows computers typically use _____, which supports much larger hard drives and files than the older fat32 and includes better security and error-recovery capabilities.
Monochrome refers to the use of one color in various shades and tints
True
False
True?
How many bits would you need if you wanted to have the ability to count up to 1000?
Answer:
10 bits
Explanation:
it would be ten bits in total
The part of the data bus that runs between the microprocessor and ram is called the _______ bus.
The part of the data bus that runs between the microprocessor and RAM is called the data bus. It facilitates data transfer within the computer, allowing components to communicate efficiently.
The data bus transfers data to and from the data registers of various system components, including the CPU and RAM. It serves as the central means for communication within the computer system, allowing different components to share and exchange information seamlessly.
Types of Buses in Computer Architecture
There are three main types of buses in a computer system:
Data bus: Transfers data between the CPU, memory, and other components.Address bus: Carries the address of the data locations that the CPU wants to access.Control bus: Transmits control signals to coordinate and manage the operations of the computer components.Users with visual or hearing impairments, or who lack the full use of their hands, need web pages that are ____.
What is the command for opening a spreadsheet object in a separate spreadsheet window
Answer:
Worksheet Object > Open
Explanation:
In the computerized environment, a command is a representation that literally commands and determines an action that the computer must perform. This command is usually performed by the computer user himself, however some software can perform this action.
An example of a command is the "Worksheet Object> Open" which is used when you want to open a spreadsheet object in a separate spreadsheet window.
Ram can be thought of as the ____ for the computer’s processor.
What is the largest number representable by an unsigned 32 bit integer?
Which part of the chipset is the fast side?Which motherboard component is the most likely cause of the problem listed below? A computer repeatedly displays the incorrect date and time after being powered on.
Which ipv4 ip class provides for 126 unique networks, each having up to 16,777,214 hosts?
Which type of network topology is the most common and easiest to use?
What is an advantage of network devices using open standard protocols?
During which stage of technical design are prototypes built
Which zone of the ocean is deepest ?
The zone of the ocean that is known to be the deepest is said to be called the Challenger Deep.
What is the ocean depth about?The southern end of the Mariana Trench, which extends several hundred kilometers southwest of the U.S.-owned island of Guam, contains the deepest portion of the ocean, known as the Challenger Deep, which lies beneath the western Pacific Ocean. The depth of Challenger Deep is roughly 10,935 meters (35,876 ft).
Note also that the deepest area of the ocean is called the hadal zone, often referred to as the hado pelagic zone, and it is located within oceanic flour. The hadal zone is found in long, narrow, topographic length that are between 6 and 11 kilometres (3.7 to 6.8 mi; 20,000 to 36,000 ft) below sea level.
Learn more about ocean from
https://brainly.com/question/13904384
#SPJ1
The deepest part of the ocean is the abyssal zone, located at depths of more than 4000 meters, characterized by high pressure, cold temperatures, and a unique chemosynthetic ecosystem.
Explanation:Deepest Ocean ZoneThe deepest part of the ocean is the abyssal zone, which extends at depths of 4000 m or greater. Despite its inhospitable conditions, including extremely cold temperatures, very high pressure, and a lack of light that precludes photosynthesis, this zone supports a variety of life forms. This unique ecosystem is home to many invertebrates and fish that rely on chemosynthetic bacteria around hydrothermal vents. These bacteria utilize hydrogen sulfide and other minerals as an energy source, forming the base of the food chain in the abyssal zone.
It is okay to perform experiments without your teacher's permission. This shows creativity.
Question 2 options:
True
False
There are two activities on your schedule, which are: 1) install server in lab 2) move server into the data center. however, the second task can't start until the server has run in the lab for 5 days without failure. this is an example of what?
There are two activities on your schedule, which are example of Lag.
What is computers lag?A lag is known to be a kind of delay (latency) that exist between the work of the user (input) and the reaction of the server aiding the task, which needs to be sent back to the client.
Note that in the above, There are two activities on your schedule, which are example of Lag.
Learn more about lag from
https://brainly.com/question/8887133
SPJ9
Final answer:
The scenario illustrates a finish-to-start dependency in project management, where one task must be completed before the next can begin, highlighting the importance of understanding task dependencies in planning.
Explanation:
The question describes a scenario where a server must operate in a laboratory setting for five days without any failures before it can be moved into a data center. This situation exemplifies a dependency in project scheduling, specifically a finish-to-start dependency. In project management, dependencies dictate the order in which tasks must be completed. A finish-to-start dependency means that one task (in this case, the server running successfully in the lab for five days) must be finished before the subsequent task (moving the server into the data center) can begin.
In constructing a project timeline, recognizing and planning for these dependencies is crucial. Whether managing a simple project or orchestrating complex operations in a data center, understanding task dependencies helps in allocating resources efficiently and avoiding project delays. Consequently, this enables a smoother workflow and better project outcomes.
Java compiler translates java source code into ________. question 11 options:
Answer:
bytecode
Explanation:
Java compiler translates java code into an intermediate representation called bytecode. The bytecode in turn is executed on a Java Virtual Machine (JVM). The structure of the bytecode is standardized and forms part of the JVM specification.
This is different from other programming languages like C/C++ where the source code is compiled to executable which runs directly on the processor.
Java compiler translates java source code into Bytecode.
Bytecode is a low-level representation of the Java code that is platform-independent.
It is a set of instructions that can be executed by the Java Virtual Machine (JVM).
When you compile Java source code using a Java compiler, it converts the human-readable Java code into bytecode, which can then be executed by the JVM on different platforms, such as Windows, macOS, or Linux.
The JVM interprets and executes the bytecode to run the Java program.
To learn more on Java programming click:
https://brainly.com/question/33333142
#SPJ6
what is an ad's target audience composed of
A. The few people who paid for the ad
B. The many people who created the ad
C. The people advertisers hope to reach
D. The people the ad features or pictures
Final answer:
The correct answer is "The people advertisers hope to reach". The target audience of an ad is composed of the people that advertisers intend to reach and who are most likely to be receptive to their marketing message. This group is identified through analysis of demographic, psychographic, and behavioral characteristics. Ads are designed to appeal to the sensibilities of this audience, using visual and verbal cues strategically.
Explanation:
The correct answer to the question 'what is an ad's target audience composed of' is C. The people advertisers hope to reach. An ad's target audience is a specific group of consumers that advertisers have determined are most likely to respond positively to their message. Determining who the ad is designed for involves looking at factors such as demographics, interests, and behaviors. It could be designed for people from a particular political party, economic class, age group, or even people with specific interests or needs.
To understand who is pictured in the advertisement and who is left out can offer insights into the target audience. For example, if an ad for a luxury car features well-dressed individuals in an affluent setting, the target audience is likely high-income earners who value prestige and luxury. The people presented in ads are usually depicted in a manner that appeals to this target audience, which can be inferred from their expressions, the direction of their gaze, and even the camera angle used.
A target audience consists not only of individuals who will directly respond to the ad, but sometimes includes a secondary audience. These are individuals who may influence the primary audience or take actions that the ad seeks to encourage, such as philanthropists supporting a cause advertised, or legislators who could enact change based on the ad's message.
Ultimately, a target audience includes anyone capable of being persuaded and capable of creating the change that the advertiser seeks.
What is the processor on a video card called? select one:
a. gpu
b. cpu
c. gddr
d. mpu?
What does AAC stand for?
Which part of a window lets you see a fileâs contents without opening the file?
In a database, a table can be defined as a data category.
a. True
b. False
Answer:
True ( A )
Explanation:
A database is a collection of information in an organised format and these data is collected, organized and stored electronically either in the computer system or an external electronic device such as flash drives and hard disks.
A database is made of tables, involving rows and columns. these depends on the type of database as well which could be a relational, object -oriented or text base database. for a database containing Tables and other forms of information the table in the database can be called or classified as a data category found in the database system.
To join two or more objects to make a larger whole is to _____________ them.
a.
regulate
b.
compliment
c.
integrate
d.
correlate
Answer:
C) Integrate
Explanation:
Got it right on Edge :D
Which osi reference model layer is associated with common networks (e.g., ethernet lans)?
Before text can be formatted, you must first _____.
What type of software can you use to capture and examine the contents of network messages?