Final answer:
The bond between calcium (Ca) and bromine (Br) is an ionic bond, where calcium donates electrons to form Ca2+ ions, and bromine atoms each gain an electron to form Br- ions, creating an ionic compound.
Explanation:
The bond between calcium (Ca) and bromine (Br) in the compound CaBr2 is an ionic bond. This type of bond is formed when one atom (in this case, calcium) donates one or more electrons to another atom (in this case, bromine).
Calcium is a metal with a tendency to lose electrons and form a positive ion (Ca2+), while bromine is a non-metal with a tendency to gain electrons and form a negative ion (Br−).
When calcium gives up two electrons, one for each bromine atom, each bromine atom gains one electron, resulting in two Br− ions. These oppositely charged ions attract each other, creating an ionic bond.
During a lunar eclipse, the moon appears to be darkened because _______________ is casting a shadow on it.
the earth
the sun
Mars
Answer:
the earth
Explanation:
because the moon is blocking the light of the sun
as electrons pass through a particular device magnets begin to rotate. this rotation is then used to power devices such as ceiling fans this is a description of what happens in a what
Answer:
Motor
Explanation:
This actuation of electric energy to mechanical energy is due to reverse magnetic induction. When you pass a wire coil, with electricity passing through it, along a magnetic field, the coil will rotate according to Fleming’s Left Hand Hand Rule. This principle is harnessed in the making of motors that can be used to power equipments such as fans.
Answer:
D) electric motor
Explanation:
Thats the answer for apex. A) electric generator B) power surge C) battery D) electric motor
1. Quartz crystals normally used in quartz clocks etc. is chemically
A. silicon dioxide
B. germanium oxide
C. a mixture of germanium oxide and silicon dioxide
D. sodium silicate
2. Which of the gas is not known as green house gas?
A. Methane
B. Nitrous oxide
C. Carbon dioxide
D. Hydrogen
Answer:
1. A. silicon dioxide
2. D. Hydrogen
Explanation:
Choose the number of significant figures indicated 0.06
Answer:
2
Explanation:
If an object moves faster and faster, what must change?
The energy speed!!!!
What was Pangaea?when did it form and when did it break apart it was
Pangaea was a supercontinent. It is the last supercontinent that had all of the continental masses joined as one, though after its breaking apart there were two other supercontinents which were very short lasting. This supercontinent formed from the pre-existing continental masses that moved toward one another and merged by the late Paleozoic era, approximately around 335 million years ago. Pangaea existed until the early Mesozoic era, and it started to break apart around 175 million years ago. From the breaking apart of this supercontinent, initially formed Laurasia and Gondwanaland, and from the further breaking apart of these two we got the modern day continents.
In both liquid water and ice, a hydrogen bond forms between _____.
a) a pair of oxygen atoms on adjacent molecules
b) the oxygen atom of one molecule and a hydrogen atom of an adjacent molecule
c) a pair of hydrogen atoms on adjacent molecules
d) an oxygen atom and a hydrogen atom in the same molecule
Answer:
b) the oxygen atom of one molecule and a hydrogen atom of an adjacent molecule
Explanation:
In a H₂O molecule there are two O-H bonds. The O atom being more electronegative pulls away the shared pair of electron in the covalent bond more towards itself thus O gaining a partial negative charge and H atom getting a partial positive charge. Thus a dipole exists in the O-H bond in the H₂O molecules. Thus in both liquid water and solid ice there is a weak attraction or hydrogen bond between the oxygen atom of one H₂O molecule and a hydrogen atom of an adjacent H₂O molecule.
What kind of system is the carbon cycle
Answer:
The carbon cycle is the biogeochemical cycle by which carbon is exchanged among the biosphere, pedosphere, geosphere, hydrosphere, and atmosphere of the Earth.
The carbon cycle is a biological and geological system composed of two interconnected sub-cycles - the biological carbon cycle and the biogeochemical carbon cycle. The biological carbon cycle involves the exchange of carbon among living organisms through processes like photosynthesis and respiration, while the biogeochemical carbon cycle involves the long-term cycling of carbon through the Earth's atmosphere, water bodies, and interior. Human activities like burning of fossil fuels can accelerate these cycles and contribute to global climate change.
Explanation:The carbon cycle is a type of system in biology that can be broadly divided into two interconnected sub-cycles. One sub-cycle deals with the rapid exchange of carbon among living organisms, and the other deals with the long-term cycling of carbon through geologic processes. These processes together help in the transfer and recycling of carbon in different forms throughout the ecosystem.
In the Biological Carbon Cycle, living organisms play a crucial role. Autotrophs, like plants, absorb carbon dioxide from the atmosphere and convert it into glucose through photosynthesis. This glucose is used by heterotrophs, like animals, for their energy needs. In this process, carbon gets incorporated in their bodies. When these animals die, the carbon gets returned to the atmosphere through decomposition. Moreover, marine autotrophs obtain carbon dioxide in the dissolved form (carbonic acid, H₂CO3). Through this biological carbon cycle process, photosynthetic organisms are responsible for maintaining approximately 21 percent of the Earth's oxygen content.
In the Biogeochemical Carbon Cycle, carbon is stored in what are known as carbon reservoirs that include the atmosphere, bodies of liquid water (mostly oceans), ocean sediment, soil, land sediments (including fossil fuels), and the Earth's interior. Over longer periods, microorganisms capable of digesting non-bioavailable carbon like coal can release it as gas, making it available for other living organisms. This process accelerates when humans burn fossil fuels, releasing large amounts of carbon dioxide into the atmosphere. Most scientists agree that the high atmospheric carbon dioxide is a major cause of global climate change.
Learn more about Carbon Cycle here:https://brainly.com/question/30508567
#SPJ3
What does Hund's rule state?
Answer:
Explanation:
Hund's Rule of Maximum Multiplicity states that electrons go into degenerate orbitals of sub-orbitals(p, d and f) singly before pairing commences.
Hund's rule is useful in determining the number of unpaired electrons in an atom. Hence, it explains some of the magnetic properties of elements.
An element whose atoms or molecules contain unpaired electrons is paramagnetic.
The element whose atoms or molecules contain orbitals that are all filed up with paired electron is diamagnetic.
Hund's rule states that in degenerate orbitals, electrons must occupy orbitals singly and with parallel spins before pairing up. This ensures the lowest-energy electron configuration. A common example is seen in the p orbitals for nitrogen.
Hund's Rule
Hund's rule states that the lowest-energy electron configuration for an atom is the one that has the maximum number of electrons with parallel spins in degenerate orbitals. This means that in any given sub-level other than the s orbital, electrons will occupy each orbital singly before starting to pair up. For instance, in the p sublevel, which has three degenerate orbitals, each of these orbitals will get one electron before any one of them gets a second electron with the opposite spin.
An easy way to visualize this is by considering the p orbitals (px, py, and pz) for an atom like nitrogen, which has three electrons in its p sublevel. According to Hund's rule, each of these three electrons will occupy one of the p orbitals singly, with parallel spins, resulting in a more stable and lower-energy configuration.
A device used to measure small currents is a(n)
Answer:
Ammeter
Explanation:
An ammeter (from Ampere Meter) is a measuring instrument used to measure the current in a circuit. Electric currents are measured in amperes (A), hence the name. Instruments used to measure smaller currents, in the milliampere or microampere range, are designated as milliammeters or microammeters.
The image shows information about the element carbon as it appears in the periodic table. Based on the image, how many protons does carbon have?
Answer:6
Explanation:
U welcome
Using the concentration of the base and the volume of the base used, calculate the moles of the base used in the titration. Then, using the mass of the acid, determine the molar mass of the acid.
Data:
Concentration of the Base(NaOH)= 0.19 M
Volume of the Base used= 8.72 mL
Mass of the Acid(unknown)= 0.33 g
Answer:
[tex]\boxed{\text{(a) 0.001 66 mol MOH; (b) 200 g/mol}}[/tex]
Explanation:
I am assuming that the unknown acid is monobasic. Then the general equation for the reaction is
HA + MOH ⟶ MA + H₂O
(a) Moles of MOH
[tex]\text{Moles of MOH}= \text{0.008 72 L MOH} \times \dfrac{\text{0.19 mol MOH}}{\text{1 L MOH}} = \text{0.001 66 mol MOH}[/tex]
(b) Moles of HA
Now, you use the molar ratio from the balanced chemical equation to find the moles of unknown acid.
[tex]\text{Moles of HA = 0.001 66 mol MOH} \times \dfrac {\text{1 mol HA}}{\text{1 mol MOH }} = \text{0.001 66 mol HA}[/tex]
(c) Molar mass of HA
[tex]\text{MM} =\dfrac{\text{mass}}{\text{moles}}= \dfrac{\text{0.33 g}}{\text{0.001 66 mol}} = \text{200 g/mol}[/tex]
The molar mass of the unknown acid is [tex]\boxed{\textbf{200 g/mol}}[/tex]
A fact is something that has been proven to be true.
True
False
i am in a test :/
Answer:
True.
Explanation:
the answer to your question is True !
what is lithosphere
Answer:
the rigid outer part of the earth, made up of the crust and upper mantle.
Explanation:
Google’s definition
A lithosphere is the rigid, outermost shell of a terrestrial-type planet, or natural satellite, that is defined by its rigid mechanical properties. On Earth, it is composed of the crust and the portion of the upper mantle that behaves elastically on time scales of thousands of years or greater.
A balloon was partially filled with helium gas at room temperature. It occupied 4.0 liters of volume at 700.0 mmHg atmospheric pressure. When the balloon was released, it traveled upward until it burst at 99 mmHg atmospheric pressure. (Neglect any force exerted to stretch the rubber balloon.) What was the volume of the balloon when it burst? L
Final answer:
To find the volume of the balloon when it burst at 99 mmHg, we use Boyle's Law. The final volume was calculated to be approximately 28.28 liters.
Explanation:
The volume of the balloon when it burst at 99 mmHg atmospheric pressure can be determined using Boyle's Law, which states that the product of pressure and volume is constant for a given mass of enclosed gas when the temperature is constant (P1V1 = P2V2).
Here, we know the initial pressure (P1) is 700.0 mmHg, the initial volume (V1) is 4.0 liters, and the final pressure (P2) upon bursting is 99 mmHg. To find the final volume (V2), we rearrange the equation to V2 = (P1V1) / P2 and substitute the known values. Doing so gives us V2 = (700.0 mmHg × 4.0 L) / 99 mmHg, which calculates to a volume of approximately 28.28 liters.
What term best describes an underground stem that grows along sending up new plants at intervals
The term for an underground stem that sends up new plants at intervals is a rhizome, while a stem that does this above ground is referred to as a stolon or runner.
The term that best describes an underground stem that grows along, sending up new plants at intervals, is a rhizome. Rhizomes are modified stems that grow horizontally underground and can branch at nodes to produce new plants. A well-known plant that reproduces from rhizomes is the iris. However, if the stem grows above the ground, it's called a stolon or runner, like those seen in strawberry plants. These runners develop adventitious roots at their nodes, and the axillary buds can turn into independent plants.
Another form of modified stem includes corms, which are fleshier and store food, and unlike rhizomes and stolon, don't typically give rise to new plants at intervals along their length.
Identify the following parts of the chemical equation
A:Coefficients B:Element C:subscripts D:Reactants E:Products
When 16.3 g of magnesium and 4.52 g of oxygen gas react, how many grams of magnesium oxide will be formed? Identify the limiting and excess reactants.
Answer:
22.77 g.
he limiting reactant is O₂, and the excess reactant is Mg.
Explanation:
From the balanced reaction:Mg + 1/2O₂ → MgO,
1.0 mole of Mg reacts with 0.5 mole of oxygen to produce 1.0 mole of MgO.
We need to calculate the no. of moles of (16.3 g) of Mg and (4.52 g) of oxygen:no. of moles of Mg = mass/molar mass = (16.3 g)/(24.3 g/mol) = 0.6708 mol.
no. of moles of O₂ = mass/molar mass = (4.52 g)/(16.0 g/mol) = 0.2825 mol.
So. 0.565 mol of Mg reacts completely with (0.2825 mol) of O₂.
∴ The limiting reactant is O₂, and the excess reactant is Mg (0.6708 - 0.565 = 0.1058 mol).
Using cross multiplication:
1.0 mole of Mg produce → 1.0 mol of MgO.
∴ 0.565 mol of Mg produce → 0.565 mol of MgO.
∴ The amount of MgO produced = no. of moles x molar mass = (0.565 mol)(40.3 g/mol) = 22.77 g.
Answer:
[tex]m_{MgO}=11.3gMgO[/tex]
Explanation:
Hello,
In this case, the undergoing chemical reaction is:
[tex]2Mg+O_2\rightarrow 2MgO[/tex]
Hence, for given amounts of magnesium and oxygen, one computes the available moles of magnesium with its given mass and atomic mass and the moles of magnesium that will completely react with 4.52 g of oxygen by using their 2:1 molar ratio in the chemical reaction in order to identify the limiting reactant:
[tex]n_{Mg}^{available}=16.3gMg*\frac{1molMg}{24gMg}=0.679molMg\\\\n_{Mg}^{reacted}=4.52gO_2*\frac{1molO_2}{32gO_2}*\frac{2molMg}{1molO_2} =0.2825molMg[/tex]
In such a way, as just 0.2825 moles of magnesium react, magnesium is identified as the excess reactant and the oxygen the limiting reactant. Furthermore, with the reacting moles, one computes the yielded grams of magnesium oxide as:
[tex]m_{MgO}=0.2825molMg*\frac{2molMgO}{2molMg}*\frac{40gMgO}{1molMgO} \\\\m_{MgO}=11.3gMgO[/tex]
Best regards.
How many kJ of energy will be released when 4.72g of carbon react with excess oxygen to produce carbon dioxide (delta H is -393.5 kJ)
Answer:
155 kJ of energy will be released.
Explanation:
The [tex]\rm \Delta H\textdegree[/tex] ([tex]\rm \Delta H \textdegree_\text{rxn}[/tex] in some textbooks) here stands for standard enthalpy change per mole reaction. To find the amount of energy released in this reaction, start by finding the number of moles of this reaction that will take place.
How many moles of atoms in 4.72 grams of carbon?
Relative atomic mass data from a modern periodic table:
C: 12.01.[tex]\displaystyle n = \frac{m}{M} = \rm \frac{4.72\;g}{12.01\; g\cdot mol^{-1}} = 0.393006\; mol[/tex].
The coefficient of carbon in the equation is one. In other words, each mole of the reaction will consume one mole of carbon. Oxygen is in excess. As a result, [tex]\rm 0.393006\; mol[/tex] of carbon will support [tex]\rm 0.393006\; mol[/tex] of the reaction.
How much energy will be released?
The [tex]\rm \Delta H\textdegree{}[/tex] value here is negative. But don't panic. [tex]\rm \Delta H\textdegree{}[/tex] is the same as the chemical potential energy of the reactants minus the products in one mole of the reaction. [tex]\rm \Delta H\textdegree{} = -393.5\;kJ[/tex] means that the chemical potential energy drops by [tex]\rm 393.5\; kJ[/tex] during each mole of the reaction (with the coefficients as-is.) Those energy difference will be released as heat. In other words, one mole of the reaction will release [tex]\rm 393.5\;kJ[/tex] of energy.
The 4.72 grams of carbon will support [tex]\rm 0.393006\; mol[/tex] of this reaction. How much heat will that [tex]\rm 0.393006\; mol[/tex] of reaction release?
[tex]Q = n \cdot (-\Delta \text{H}\textdegree{}) = \rm 0.393006\times 393.5 = 155\;kJ[/tex].
As a side note, the mass of carbon 4.72 grams is the least significant data in this question. There are three significant figures in this value. As a result, keep more than three significant figures in calculations but round the final result to three significant figures.
The energy released when 4.72g of carbon reacts with excess oxygen to form CO₂ is -154.8 kJ.
To determine how many kJ of energy are released when 4.72g of carbon reacts with excess oxygen to produce carbon dioxide, we use the given enthalpy change (ΔH) for the reaction:
First, we need to find the number of moles of carbon in 4.72g:
Molar mass of carbon = 12 g/mol
Moles of carbon = mass / molar mass = 4.72 g / 12 g/mol = 0.3933 mol
The reaction for the combustion of carbon to form CO₂ is exothermic, with ΔH = -393.5 kJ/mol.
The total energy released is calculated as follows:
Energy released = moles of carbon x ΔH
Energy released = 0.3933 mol x -393.5 kJ/mol = -154.8 kJ
Thus, the energy released when 4.72g of carbon reacts with excess oxygen is -154.8 kJ.
What is the mass of 2.45 miles or C3H403?
Answer:
215.6 g.
Explanation:
We have the relation:no. of moles (n) = mass/molar mass.
∴ mass of C₃H₄O₃ = (no. of moles)*(molar mass) = (2.45 mol)(88.0 g/mol) = 215.6 g.
What is the percent composition of silicon in silicon carbide (SiC)? A. 28% B. 50% C. 70% D. 142%
Hey there!
Here goes your answer ↓
Question :- What is the percent composition of silicon in silicon carbide (SiC)?
A. 28%
B. 50%
C. 70%
D. 142%
Answer :- The percentage of silicon content in silicon carbide (SiC) is option (C) 70%.
Hope it helps you.
Have a great day ahead!
Answer : The correct option is, (C) 70%
Explanation : Given,
Molar mass of Si = 28.09 g/mole
Molar mass of C = 12 g/mole
Molecular mass of SiC = 28.09 + 12 = 40.09 g/mole
To calculate the mass percent of an element in a compound, we use the equation:
[tex]\text{Percent composition of Si}=\frac{\text{Mass of Si in compound}}{\text{Mass of the compound}}\times 100[/tex]
Now put all the given values in above equation, we get:
[tex]\text{Percent composition of Si}=\frac{28.09g}{40.09g}\times 100=70\%[/tex]
Hence, the percentage composition of Si in the given compound is 70%
how does nuclear reactor produce electricty
With a process called Fission. This generates heat to produce steam.
Leo's recipe for banana bread won't fit in his favorite pan. The batter fills the 8.5 inch by 11 inch by 1.75 inch pan to the very top, but when it bakes it spills over the side. He has another pan that is 9 inches by 9 inches by 3 inches, and from past experience he thinks he needs about an inch between the top of the batter and the rim of the pan. Should he use this pan? WHY or WHY not? (I posted in chemistry oops)
yes because the
0。5 that's left may stop the batter from over flowing
3AI²O³ What is the name of the element
Answer:
Aluminium oxide
Explanation:
This is not an element but a coumpound.
Al is Aluminum
And O is Oxygen
The variable that a scientist observes to change while conducting an experiment is called the ___ variable.
A.) mainipulated
B.) responding
C.) independent
Great Question!
The Answer Would Be "B" The "RESPONDING" Variable
The variable that a scientist observes to change while conducting an experiment is called the responding variable.
When 24g of magnesium metal is heated in air, 40g of magnesium oxide is produced. What mass of magnesium would be needed in order to produce 10g of magnesium oxide?
Final answer:
To produce 10g of magnesium oxide, 6g of magnesium would be needed.
Explanation:
To find the mass of magnesium needed to produce 10g of magnesium oxide, we can use the given information about the reaction between magnesium and oxygen. From the given information, we know that when 24g of magnesium is heated in air, 40g of magnesium oxide is produced. This means that the reaction produces a 1:1 ratio between the mass of magnesium and the mass of magnesium oxide. Therefore, if 24g of magnesium produces 40g of magnesium oxide, then 10g of magnesium oxide would require (10g/40g) * 24g = 6g of magnesium.
A sample of hydrated copper (II) sulfate has a mass of 4.56 g. After heating, it has a mass of 2.92 g.
What is the percent by mass of water in the hydrate?
Answer:
36.0%.
Explanation:
The mass of water = mass of hydrated copper (II) sulfate - mass of copper (II) sulfate after heating = 4.56 g - 2.92 g = 1.64 g.
The percent by mass of water in the hydrate = (mass of water/mass of hydrated copper (II) sulfate)*100 = (1.64 g/4.56 g)*100 = 35.96% ≅ 36.0%.
What is the frequency of light for which the wavelength is 7.1 × 102 nm?
2.4 × 10 −6 s −1
2.1 × 102 s −1
4.2 × 105 s −1
4.2 × 1014 s −1
Answer:
4.2 × 10⁻¹⁴s⁻¹
Explanation:
Given parameters:
Wavelength of light = 7.1 x 10²nm
We simplify and express this value in metres(m) to give:
⇒7.1 x 10² x 10⁻⁹m = 7.1 x 10⁽⁻²⁺⁹⁾ m
= 7.1 x 10⁷m
The wavelength is 7.1 x 10⁷m
We use the formula V = fλ
We know that Velocity of light is 3 x 10⁸ms⁻¹
Making f, frequency the subject of the formula gives :
f = V/λ
f = 3 x 10⁸ms⁻¹ / 7.1 x 10⁷m
f = 4.2 x 10⁻¹⁴s⁻¹
The frequency of light with a wavelength of 7.1 × 10² nm is 4.23 × 10^14 s⁻¹.
Explanation:The frequency of light with a wavelength of 7.1 × 10² nm can be calculated using the formula:
$$ \nu = \frac{c}{\lambda} $$
where c is the speed of light (3.00 × 10^8 m/s) and λ is the wavelength in meters.
Plugging in the values, we get:
$$ \nu = \frac{3.00 \times 10^8 \, \text{m/s}}{7.1 \times 10^{-9} \, \text{m}} = 4.23 \times 10^{14} \, \text{s}^{-1} $$
Therefore, the frequency of light with a wavelength of 7.1 × 10² nm is 4.23 × 10^14 s⁻¹.
What is true of acids?
a.They are poor electrolytes.
b.They have a pH above 9.
c.They have a pH below 7.
d.They have a strong affinity for H ions.
Acids have a pH below 7 (option c), indicating a higher concentration of hydronium ions.
The correct answer is: c. They have a pH below 7.
In chemistry, acids are substances that have a pH value lower than 7. This lower pH indicates a higher concentration of hydronium ions (H₃O⁺) compared to pure water. For example, vinegar, which tastes sour, is an acid with a pH lower than 7. Strong acids are particularly notable for being able to damage materials, demonstrating their high acidity.
Here's why the other options are incorrect:
a. They are poor electrolytes.: Acids are actually good electrolytes, meaning they can conduct electricity in a solution. This is because they dissociate into ions, such as H+ and anions, which can carry electrical charge.b. They have a pH above 9.: This is actually characteristic of bases, not acids. Bases have a pH above 7, with a higher pH indicating a stronger base.d. They have a strong affinity for H ions.: This statement is somewhat misleading. Acids do release H+ ions, but they don't have a strong affinity for them. Instead, acids tend to donate H+ ions, increasing their concentration in a solution.Need help on this ASAP !!!!
Answer:
0.1612 mol.
Explanation:
From the balanced equation:2Ca₃(PO₄)₂ + 6SiO₂ + 10C → 6CaSiO₃ + P₄ + 10CO.
2.0 moles of Ca₃(PO₄)₂ react with sufficient SiO₂ and C to produce 1.0 mole of P₄ and other products.
we need to calculate the no. of moles of 100.0 g of Ca₃(PO₄)₂:no. of moles of Ca₃(PO₄)₂ = mass / molar mass = (100.0 g)/(310.18 g/mol) = 0.3224 mol.
Using cross-multiplication:
2.0 moles of Ca₃(PO₄)₂ produce → 1.0 mole of P₄.
0.3224 mole of Ca₃(PO₄)₂ produce → ??? mole of P₄.
∴ The no. of moles of phosphorous (P₄) will be produced = (1.0 mole)(0.3224 mole)/(2.0 mole) = 0.1612 mol.