Power is a measure of how quickly work is done or how quickly energy is transferred. The relationship between work and power is (P) = W ÷ t
The following equation describes how work and power are related:
Power (P) = W ÷ t
The power production is larger when the same amount of work is completed in less time. On the other hand, if the work is spread out over more time, the power production is lower.
For instance, if two people work equally hard but one does the task faster than the other, that person is exerting more power than the person who takes longer.
This relationship demonstrates how power is influenced by both the quantity and duration of work.
Therefore, The relationship between work and power is (P) = W ÷ t
To know more about the power:
https://brainly.com/question/19382734
#SPJ6
The light-gathering power of a 4-meter telescope is ________ than that of a 2-meter telescope.
Final answer:
The light-gathering power of a 4-meter telescope is significantly greater than that of a 2-meter telescope due to the proportional increase in aperture area, allowing it to collect four times as much light.
Explanation:
The light-gathering power of a 4-meter telescope is significantly greater than that of a 2-meter telescope. This is because the light-gathering ability of a telescope is determined by the area of its aperture (the mirror or lens that collects light), and this area increases with the square of the diameter of the aperture. Therefore, a 4-meter diameter telescope has an aperture area that is 4 times larger than that of a 2-meter diameter telescope, allowing it to gather significantly more light.
To illustrate, if a 1-meter telescope collects a certain amount of light, a 4-meter telescope, with 16 times the area, would collect 16 times as much light. Similarly, compared to a 2-meter telescope, a 4-meter telescope, having an area four times greater (since the area is proportional to the square of the diameter), can collect four times as much light.
What causes the moon's phases?
a. the rotation of the moon on its axis
b. earth's tilt on its axis as it revolves around the sun
c. changes in how much of the sunlit side of the moon faces earth.
d. the position of the moon each month in relation to?
C.
Changes in how much of the sunlit side of the moon faces Earth
After traveling for 3.0 seconds, a dog reaches a speed of 15 m/s. what is the dog's acceleration?
If a projectile fired beneath the water, straight up, breaks through the surface at a speed of 13m/s, to what height above the water will it ascend
The projectile will ascend to a height of 9.9 meters above the water's surface.
Explanation:To find the maximum height above the water, we can use the equations of motion for projectile motion. First, we need to find the time it takes for the projectile to reach the surface of the water. We can use the equation y = v0t + (1/2)at2, where y is the displacement, v0 is the initial velocity, a is the acceleration due to gravity, and t is the time.
Given that the initial velocity is -13m/s (since the projectile is moving in the opposite direction of the acceleration due to gravity), the acceleration due to gravity is -9.8m/s2, and the displacement is 0 (since the projectile breaks through the surface of the water), we can rearrange the equation to solve for t: 0 = -13t + (1/2)(-9.8)t2. By solving this quadratic equation, we find that t = 1.33s or t = 0.
Since the time can't be negative, we discard the t = 0 solution. Therefore, the time it takes for the projectile to reach the surface of the water is t = 1.33s. Now, to find the maximum height above the water, we can use the equation v = v0 + at, where v is the final velocity, v0 is the initial velocity, a is the acceleration, and t is the time.
Using the known values: v = 0m/s (since the projectile comes to a stop at its maximum height), v0 = -13m/s, a = -9.8m/s2, and t = 1.33s, we can rearrange the equation to solve for the maximum height h: 0 = -13 - 9.8(1.33) + h. By solving this equation, we find that h = 9.9m. Therefore, the projectile will ascend to a height of 9.9 meters above the water's surface.
Hanna tosses a ball straight up with enough speed to remain in the air for several seconds?
a.what is the velocity of the ball when it reaches its highest point?
b.what is the velocity 1 s before it reaches its highest point?
c.what is the change in its velocity during this 1-s interval?
d.what is its velocity 1 s after it reaches its highest point?
e.what is the change in velocity during this 1-s interval?
f.what is the change in velocity during the 2-s interval(caution velocity not speed)?
g.what is the acceleration of the ball during any of these time intervals and at the moment the ball has zero velocity
Answer:
Explanation:
In the free fall motion we have that the acceleration is constant and produced by gravity, this acceleration has a magnitude of 32 ft/s2 or 9.8 m/s2 depending on the units you are working with. This means that every second the speed changes a magnitude of 32 ft/2, the velocity will depend of whether the ball is going upward (positive) or downward (negative).
A) At the highest point the ball stops to start the descend, here v=0 ft/s
B) +32 ft/s. The vector is going up, in the next second the velocity is going to be 0 (negative acceleration)
C) V=vf-vo=0-32=-32 ft/s is the constant change in velocity in projectile motion
D) -32 ft/s. The vector is pointing downward
E) V=vf-vo=-32-0=-32 ft/s is the constant change in velocity in projectile motion, 32 ft/s per second
F) Delta V=vf-vo=-32-32=-72 ft/s
g) gravity acceleration is constant 32 ft/s2 (pointing downward vector)
Answer the question below based on the periodic table entry for bromine.
How many neutrons does bromine have?
10
35
45
80
Which of the following is a supersonic speed? Mach 0.005 Mach 0.05 Mach 0.5 Mach 5
I just had this question, the correct answer is March 5
How do you calculate force?
A spacecraft is separated into two parts by detonating the explosive bolts that hold them together. the masses of the parts are 1300 kg and 1700 kg. the magnitude of the impulse on each part from the bolts is 210 n · s. with what relative speed do the two parts separate because of the detonation?
If the distance from the moon to the satellite is 2.6 × 106 m, what is the mass of the satellite?
HELP
450kg would be your answer.
Hope it helped you.
Answer:
450
Explanation:
What are the three subatomic particles? Where are they found within an atom? What charge do they each have?
In the circuit diagram, what does the symbol made of two long lines and two short lines with a positive and a negative sign at each end represent? a source of electrical energy an electrical conductor an electrical resistor a closed switch
For those seeking for the answer, its a source of electrical energy.
Answer:
its a source of electrical energy.
Explanation:
The shopper pays for his groceries and pushes the shopping cart out of the store, where he encounters a ramp that helps him move the cart from the sidewalk down to the parking lot. What force accelerates the cart down the ramp?
Answer:
Gravitational force will accelerate the cart.
Explanation:
In the given case the cart is on a ramp in this situation the gravitational force is applied normally on the cart and its horizontal component which is [tex]mgcos\theta[/tex] and its vertical component which is [tex]mgsin\theta[/tex] acting along the ramp.
In this situation as we the acceleration is increased by a factor [tex]gsin\theta[/tex] which helps in increasing its acceleration.
Therefore acceleration due to gravity will accelerate the cart.
In the formula vy = ayt, what is the value of ay for an object in projectile motion?
–9.8 m/s2
0 m/s2
m/s2
1.0 m/s2
Answer : The correct option is (A) [tex]-9.8\ m/s^2[/tex]
Explanation :
The formula is given as :
[tex]v_y=a_yt[/tex]
Where,
[tex]v_y[/tex] is vertical component of velocity.
[tex]a_y[/tex] is the vertical component of acceleration.
In a projectile motion, the particle moves in a path under the influence of gravity.
So, the vertical component of acceleration is -g i.e acceleration due to gravity.
Hence, the correct option is (a) " [tex]a_y=-9.8\ m/s^2[/tex] ".
Sean drew this diagram and labeled an unknown gas as gas A. Which gas does A represent?
What is the final speed?
An analogy makes a comparison between objects based on their similar qualities. Cassidy wanted to create an analogy for the motion of atoms in solids, liquids, and gases, so she compared them to marbles in a tray. Which best compares the phases of matter to marbles in a tray? A solid is like the tray being shaken and the marbles moving around it, and a liquid is like the tray being shaken slowly and all the marbles moving in their positions. A solid is like the tray being shaken slowly and all the marbles moving in their positions, a liquid is like the tray being shaken and the marbles moving around it, and a gas is like the tray being shaken hard and the marbles moving vigorously around it. A gas is like the tray being shaken slowly and all the marbles moving in their positions, and a solid is like the tray being shaken hard and the marbles moving vigorously around it. A liquid is like the tray being shaken hard and the marbles moving vigorously around it, and a gas is like the tray being shaken slowly and all the marbles moving in their positions.
Answer:
The answer is b for anyone wondering.
Explanation:
How does the mass of an astronaut change when she travels from earth to the moon? how does her weight change?
Answer:
Mass does not change
Weight redueces on the moon
Explanation:
The mass of an object never changes with respect to the astronomical body it is on. The mass of an object is the resistance it provides to a force which is applied.
A 1 kg object is an 1 kg object anywhere in the universe.
Weight is the affect of an astronomical object's gravity on it
[tex]W=mg[/tex]
where,
m = Mass of the object
g = Acceleration due to gravity
[tex]g_e[/tex]=Acceleration due to gravity on Earth = 9.81 m/s²
[tex]g_m[/tex]=Acceleration due to gravity on Moon = 1.62 m/s²
Weight on Earth
[tex]W_e=mg_e\\\Rightarrow W_e=9.81m[/tex]
Weight on Moon
[tex]W_m=mg_m\\\Rightarrow W_m=1.62m[/tex]
Dividing the equations we get
[tex]W_m=\frac{1.62}{9.81}W_e\\\Rightarrow W_m=0.165W_e[/tex]
The weight of the astronaut on the moon will be 0.165 times the weight on Earth.
So, the weight of the astronaut will be reduced on the moon
It takes 200 n to move a box 10 meters in 8 seconds. how much power is required?
The answer is 250 W
Apex
Pitch describes the loudness of a sound.
True False?
How do fission nuclear reactions differ from fusion nuclear reactions?
If an electron loses energy what may happen to it
two cars on a straight road at time zero are beside each other. the first car, traveling at speed 30 m/s, is passing the second car, which is traveling at 24 m/s. seeing a cow on the road ahead, the driver of each car starts to slow down at 6.0 m/s^2. find the expression of the velocity of the second car.
Final answer:
To find the expression for the velocity of the second car, consider the motion of both cars separately. The velocity of the second car can be described as v2 = 24 - 6t.
Explanation:
To find the expression for the velocity of the second car, we need to consider the motion of both cars separately.
Let's assume that the first car passes the second car at time t = 0. The position of the first car can be described as x1 = 30t, where t is the time elapsed since the first car passed the second car.
The position of the second car can be described as x2 = (24)t - (1/2)(6)t^2, where the negative term represents the deceleration of the second car due to slowing down at 6.0 m/s^2.
Now, we can find the expression for the velocity of the second car by taking the derivative of its position equation with respect to time: v2 = 24 - 6t.
The velocity of the second car, which starts at 24 m/s and decelerates at 6.0 m/s², can be described by the function v(t) = 24 - 6t. This equation shows how the car's velocity decreases over time. For any given time t, you can calculate the velocity using this expression.
To find the expression of the velocity of the second car, we need to consider its deceleration. The second car's initial velocity is 24 m/s, and it decelerates at a rate of 6.0 m/s². The general equation for the velocity of an object under constant acceleration (or deceleration) is:
v(t) = v₀ + at
Here, v(t) is the velocity at time t, v₀ is the initial velocity, and a is the acceleration (note that since it is deceleration, the acceleration will be negative).
Given:
Initial velocity, v₀ = 24 m/sAcceleration, a = -6.0 m/s²We can substitute these values into the equation:
v(t) = 24 m/s - (6.0 m/s²) * t
So, the expression for the velocity of the second car as a function of time is:
v(t) = 24 - 6t
how is tempature related to kinetic energy
Suppose you increase your walking speed from 5 m/s to 15 m/s in a period of 1 s. What is your acceleration?
What are characteristics of a moist, unstable air mass?
A moist, unstable air mass is an air mass that has a high moisture content, Low density and Warm temperatures.
Explanation:
A moist, unstable air mass is an air mass that has a high moisture content and is not very dense. This means that the air molecules are not very tightly packed together, which makes it easier for them to rise and form clouds and precipitation.
Here are some of the characteristics of a moist, unstable air mass:
High moisture content: The air mass has a high moisture content, which means that it contains a lot of water vapor.Low density: The air mass is not very dense, which means that the air molecules are not very tightly packed together.Warm temperatures: The air mass is typically warm, which means that the water vapor can easily evaporate and form clouds.Turbulence: The air mass is often turbulent, which means that there are strong winds and eddies that can help to mix the air and promote cloud formation.Find more exercises on unstable air;
https://brainly.com/question/28139476
#SPJ6
Which of the following best describes what went wrong with the scientists’ study? an improper experimental procedure the lack of a control group selection bias human error
Newton Calculation Error
in the book "Principia Mathematica" contains a simple calculation error that was not discovered for 300 years. Errors occur in Proposition Eight, where Newton presents a formula for calculating the mass of the planet, involving angles formed by two specific lines.
Further explanation
The mistakes made by scientists:
Galileo's Tidal TheoriesHe was wrong from the start, starting his efforts to explain the tidal movements with a false premise - namely that it was caused by the rotation of the earth around the sun. This means the theory is incorrect because it is based on mistakes.
Darwin and the Theory of HeredityOne problem with Darwin's original theory concerns heredity. Many people have a misconception about how characteristics are passed down from parents to their children. The problem is that this notion of mixed genetics contradicts Darwin's own theory. If that is true, then the characteristics will not change from generation to generation through natural selection.
Triple helix from Linus PaulingDespite getting the Nobel Prize, Pauling admitted there was an error in his discovery. The model is wrong for a very simple reason: This includes the triple helix. He also made a basic mistake in his calculations, and the nucleic acid molecule in his model was actually not acidic.
Edwin Hubble's Universe CalculationsAccording to Hubble, the universe is two billion years old. This statement is proven wrong. In the 1930s, a study said the earth was between three and five billion years old. Obviously, our planet cannot be older than the universe, so something's wrong with Hubble.
Learn More
Scientist https://brainly.com/question/6701391
The Mistakes from Scientist https://brainly.com/question/6701391
Details
Class: High School
Subject: Physics
Keywords: scientist, mistake, newton
When you open a fridge door is it endothermic or exothermic?
Final answer:
When you open a fridge door, the process is endothermic because the refrigerator absorbs heat from the warm air that enters, which cools the inside.
Explanation:
When you open a fridge door, the process is endothermic. The refrigerator absorbs heat from the surroundings to cool the items inside. During this process, the system (inside of the fridge) gains heat from the warm air that enters when the door is open. By convention, the sign of q (the quantity of heat) for an endothermic process is positive because the system is gaining heat. On the other hand, an exothermic process would be like the inside of a freezer making ice, where heat is removed from the water to freeze it, thus releasing heat to the surroundings.
Understanding the endothermic nature of refrigeration is essential for designing efficient cooling systems, as it allows for the controlled absorption of heat to maintain lower temperatures inside the fridge. The principles of endothermic and exothermic processes guide the engineering of various thermal systems, influencing their energy efficiency and overall performance.
What does a DIP sign mean
A DIP sign is a geological term that represents the inclination of a rock layer or feature, which includes the angle of dip and the compass direction. It is recorded using the right-hand rule, with the strike direction being perpendicular to the dip. An example would be 040/30 SE, indicating a strike of 040° and a dip of 30° towards the southeast.
Explanation:A DIP sign in geological terms refers to the angle at which a rock layer or geological feature is inclined from the horizontal plane. The measurement of the dip includes both the angle of inclination and the compass direction in which the layer is dipping. According to the right-hand rule for geological measurements, if you place your right hand on the dipping layer with your fingers pointed in the direction of the dip, your thumb will point in the direction of the strike. Therefore, the strike is always perpendicular to the dip direction.
For example, if the strike is 040° and the dip is 30°, you would record this as 040/30 SE. This indicates that the geological plane has a strike roughly in the NE direction and dips to the SE at a 30° angle. The indication of the compass direction (SE in this case) is important to confirm that the right-hand rule measurement was performed correctly. Conversely, a dip measurement of 225/30 would imply a NW dip direction, since it is clockwise from the strike.
If an object moves with a constant velocity, what is the acceleration of the object? What is the net force acting on the object?
An object moving with constant velocity has an acceleration of zero and a net force acting on it also zero, as forces are balanced and it is in equilibrium according to Newton's second law.
Explanation:If an object moves with a constant velocity, the acceleration of the object is zero. This is because acceleration is defined as the change in velocity over time, and if the velocity is constant, there is no change. Therefore, according to Newton's second law, which states F = ma (force equals mass times acceleration), if the acceleration is zero, the net force acting on the object must also be zero. This scenario is true for all objects in equilibrium, whether they are moving at constant velocity or are stationary relative to Earth. Objects in equilibrium have net forces that are balanced, resulting in no acceleration.
As for the net force acting on the object, it would also be zero. When an object travels at constant velocity, it is not accelerating, which means the forces acting on it are in equilibrium—the sum of all forces equals zero. This could include situations such as a car moving at a steady speed on a flat road where the engine's thrust equals the frictional forces opposing it.