The Net Ionic equation for the reaction between MgSO4 with Sr(NO3)2 is given by;
Sr ⁺²(aq) + SO₄⁻²(aq) → SrSO₄(s)
Further ExplanationNet ionic equations Net ionic equations that do not include all ions that are present in the reactants and products. The equations only includes the ions that are involved in the reaction. The ions that are not involved in a chemical reaction are called spectator ions and are cancelled out while writing ionic equations.Reaction between MgSO4 with Sr(NO3)2 is an example of a displacement reaction.During the reaction magnesium ion bonds with nitrate ions and forms magnesium nitrate, while strontium ion bonds with sulfate ion to form strontium sulfate.That is:
MgSO₄(aq) + Sr(NO₃)₂(aq) → Mg(NO₃)₂(aq) + SrSO₄(s)
Mg ion remains in aqueous form in both magnesium nitrate and magnesium sulfate and therefore cancelled out since it is a spectator ion. Additionally, Nitrate ion is also a spectator ion as it does not change state thus, also cancelled out while writing net ionic equation.Therefore; the ionic equation required will be;
Sr ⁺²(aq) + SO₄⁻²(aq) → SrSO₄(s)
Keywords: Net ionic equationsLearn more about; Net ionic equation: https://brainly.com/question/11510759Spectator ions: https://brainly.com/question/4153338Example of net ionic equations; https://brainly.com/question/11482104Level: High school
Subject: Chemistry
Topic: Chemical equation
Sub-topic: Net ionic equations
What effect does the presence of an impurity have on the freezing point of a liquid?
A change that occurs when a substance changes composition by forming one or more new substances
What functional feature(s) does the phosphate group contribute to the structure of a phospholipid? select all that apply. select all that apply. nonpolar group that avoids water negative charge to interact with water place to attach fatty acids place where bonds can form between adjoining phospholipids place to attach another small charged molecule?
Final answer:
Phosphate group in phospholipids contributes through nonpolar avoidance of water, negative charge for water interaction, and providing bonding sites for adjoining phospholipids.
Explanation:
The phosphate group contributes to the structure of a phospholipid in the following ways:
Nonpolar group that avoids water: The fatty acid tails are nonpolar and hydrophobic, which provides stability and structure to the phospholipid bilayer.
Negative charge to interact with water: The phosphate group is negatively charged, making it hydrophilic and allowing it to interact with water molecules.
Place where bonds can form between adjoining phospholipids: The phosphate groups can form bonds with adjacent phospholipids, contributing to the formation of the lipid bilayer.
If an atom had 7 electrons in second shell, it would need to ________ electron(s) to become stable.
Which units represent density? Select all that apply. -cm³ -g/m³ -g/cm³ -cm³/gm -kg/L -kg/cm³ -mL/cm³
Answer:
[tex]Kg/cm^3[/tex]
[tex]g/cm^3[/tex]
[tex] Kg/L[/tex]
[tex]g/m^3[/tex]
Explanation:
We know that density is defined as the mass per unit volume
[tex]Density=\frac{Mass}{volume}[/tex]
When mass in gram and volume in cubic centimeter
Then units of density is[tex]g/cm^3[/tex]
When mass is given in Kg and volume given in litre then unit of density
[tex] Kg/L[/tex]
When mass is given in gram and volume in meter then units of density is given by [tex]g/m^3[/tex]
When mass is given in kilogram and volume is given in cubic centimeter
Then, units of density is given by [tex]Kg/cm^3[/tex]
Which choice lists the correct order of the coefficients of each substance in the following neutralization reaction when the equation is balanced correctly? H2SO4 + LiOH → Li2SO4 + H2O 1, 1, 1, 1 2, 1, 2, 1 1, 2, 1, 2 1, 2, 1, 1
Answer : The order of the coefficients of each substance in the following neutralization reaction are, 1, 2, 1, 2
Explanation :
Balanced chemical reaction : It is defined as the chemical reaction in which the number of individual atoms of an element in reactant side always be equal to the number of individual atoms of an element in product side.
The given unbalanced reaction will be,
[tex]H_2SO_4+LiOH\rightarrow Li_2SO_4+H_2O[/tex]
In order to balance the chemical reaction, the coefficient 2 is put before the reactant [tex]LiOH[/tex] and product [tex]H_2O[/tex].
The balanced chemical reaction will be,
[tex]H_2SO_4+2LiOH\rightarrow Li_2SO_4+2H_2O[/tex]
By the stoichiometry we can say that, 1 moles of [tex]H_2SO_4[/tex] react with 2 moles of [tex]LiOH[/tex] to give 1 mole of [tex]Li_2SO_4[/tex] and 2 moles of [tex]H_2O[/tex] as a product.
Hence, the order of the coefficients of each substance in the following neutralization reaction are, 1, 2, 1, 2
Answer the lab question (“what is the effect of temperature on the solubility of a solid in a liquid?”) with a hypothesis:
The hypothesis for solubility has been, "With the increase in temperature there has been an increase in solubility."
The solubility has been the extent of the dissolution of the solute in the solvent without being precipitated out. The solubility has been dependent on the bonding of solute molecules with the solvent.
The hypothesis for the effect of temperature on solubility has been:
With the increase in temperature, there has been an increase in solubility.
The research has been mediated with the acceptance of the hypothesis with the increased solubility as there have been more available solute molecules for dissolution with the solvent molecules.
Thus, the hypothesis for solubility has been, "With an increase in temperature there has been an increase in solubility."
For more information about solubility, refer to the link:
https://brainly.com/question/13620168
The atomic mass of the atom is composed of the mass of _____. protons + electrons neutrons + electrons protons + neutrons just neutrons
Answer : The atomic mass of the atom is composed of the mass of protons + neutrons.
Explanation :
Atomic number : It is defined as the number of protons or number of electrons.
Atomic number = number of protons = number of electrons
Atomic mass : It is defined as the sum of number of protons and number of neutrons.
Atomic mass = Number of protons + Number of neutrons
For example : The sodium (Na) elements has atomic number 11. That means, the number of electrons and number of protons is equal to 11. The number of neutrons are 12. So, the atomic mass will be:
Atomic mass of Na = Number of protons + Number of neutrons
Atomic mass of Na = 11 + 12 = 23
Hence, the atomic mass of the atom is composed of the mass of protons + neutrons.
Is the process of bananas ripening a chemical change or a physical change? explain?
During chemical change and the chemical property ripen banana which involve in a different steps like change in color of peel from green to yellow then to brown, in second step change in taste become more sweeter as they begin to ripen.
What are the difference between chemical and physical property ?Chemical properties of the substance which can be measured when the substance undergoes chemical change where as the Physical properties of the substance include without involvement of any chemical change.
A chemical reaction conducted to show the chemical property where as for the determination of physical property of a substance no chemical reaction occur.
In Chemical properties the compounds are formed by chemical bonds while in Physical properties the compounds do not give any relationship.
chemical property used to detect how substances react while physical property used in identifying or describing the substance.
Learn more about chemical property, here:
brainly.com/question/5186976
#SPJ2
How often do you need to make a fresh bleach solution?
To minimize the sharp ph shift that occurs when a strong acid is added to a solution
Why is distilled water added to the crucible after igniting the magnesium metal?
The reason why distilled water is being added to the crucible after having It to be ignited with the magnesium ribbon is mainly because it is needed to decompose the magnesium nitride to produce a more better result in the experiment and prevent it from reacting more vulgar such as having it to explode.
Answer:
To decompose the Mg3N and release ammonium gas
Explanation:
Distilled water is the pure state of water, without mixing with other substances and microorganisms. It is obtained through the distillation process. Even though it is clean water, it is not suitable for consumption, however it can have several other applications, such as being added to the crucible after ignition of the magnesium metal, because it allows the decomposition of Mg3N and release of ammonium gas, avoiding the emergence of explosions.
Metals experience plastic deformation when _____.
Final answer:
Metals experience plastic deformation when stress is applied beyond their elastic limit. Unlike rubber-like materials, metals show a gradual decrease in stress with increasing strain, making them malleable and ductile.
Explanation:
Metals experience plastic deformation when stress is applied beyond their elastic limit. Plastic deformation is an irreversible change in the shape and size of a material, even when the load is removed. Unlike rubber-like materials that become more difficult to stretch and eventually break, metals show a gradual decrease in stress with increasing strain, making them malleable and ductile.
When stress is applied to a metal, the free-flowing electrons can slip between the stationary cations and prevent them from coming into contact. This allows the metal to deform without breaking and enables processes like hammering into shapes, rolling into thin sheets, or pulling into thin wires.
Which of the following is not stage in the development of a thunderstorm
Answer:
updraft stage
Explanation:
The targets used in the alpha particle atomic experiments in the early 1900's were
You are handed a sample of an unknown silicate mineral. which two elements must it contain?
Four elements make up about 96% of the mass of the human body. which are those four elements? (choose all that apply.) four elements
The four known elements that make up 96 percent of the mass of the human body are the following: Oxygen or O in the Periodic table, Carbon or C, Hydrogen or H, and Nitrogen or N in the periodic table. These are the 4 elements that makes up the body mass of an individual.
What minimum volume of 0.200 m potassium iodide solution is required to completely precipitate all of the lead in 155.0 ml of a 0.112 m lead (ii) nitrate solution?
The minimum volume of 0.200 M potassium iodide required to completely react with 155.0 mL of 0.112 M lead nitrate is 173.6 mL. The larger volume is needed due to the 2:1 stoichiometry in their reaction equation, resulting in a yellow precipitate of lead iodide.
Explanation:This question is about a precipitation reaction between potassium iodide and lead (II) nitrate. The reactant in a solution will react until it is entirely consumed, forming a solid precipitate called lead iodide. As given by the balanced chemical equation, 2KI(aq) + Pb(NO3)2(aq) → PbI2(s) + 2KNO3(aq), one molecule of lead nitrate reacts with two molecules of potassium iodide. Because all the reagents are in solution, we calculate amounts in moles using their molarities (M) and volumes (L).
Let's denote the required volume of potassium iodide solution as 'V'. Therefore, the number of moles in the required potassium iodide solution would be (0.200 M * V). Similarly, the number of moles in the given volume of lead nitrate solution is (0.112 M * 155.0 mL = 0.01736 moles). Since the reaction ratio is 2:1, we need twice the amount of potassium iodide for each mole of lead nitrate. Consequently, 2 * 0.01736 moles of potassium iodide are required. Solving the equation 0.200 M * V = 2 * 0.01736, gives the minimum volume 'V' required as 0.1736 L or 173.6 mL.
Learn more about Stoichiometry in Precipitation Reactions here:https://brainly.com/question/29019892
#SPJ11
An atom has 16 protons and 17 neutrons. What is the chemical symbol for the atom? Consult the periodic table.
Question 8 options:
A.33Cl
B.32S
C.33S
D.32Cl
The answer is C.33S. I had this question as well. Hope this helps you :)
The symbol of a chemical element whose atom has 16 protons and 17 neutrons is 33S. Thus, the correct option for this question is C.
What are Protons?Protons may be defined as the type of sub-atomic particles that are significantly present in the nucleus of an atom along with neutrons. Protons are positively charged in nature. It might be thought that protons are discovered by Ernest Rutherford.
If an atom has 16 protons, it means that it has an atomic number of 16. According to the periodic table, the atomic number 16 is occupied by the sulfur element. While chlorine elements have an atomic number of 17.
Now, the atomic mass is equal to the number of protons plus the number of neutrons. So, atomic mass = 16 + 17 = 33.
Therefore, the symbol of a chemical element whose atom has 16 protons and 17 neutrons is 33S. Thus, the correct option for this question is C.
To learn more about Atomic numbers, refer to the link:
https://brainly.com/question/2176858
#SPJ2
A urine sample has a mass of 147 g and a density of 1.010 g/ml. what is the volume of this sample?
Final answer:
To find the volume of a urine sample with a mass of 147 g and a density of 1.010 g/ml, divide the mass by the density. The volume is 145.54 ml.
Explanation:
The volume of the urine sample can be calculated using the formula:
Volume = Mass / Density
Given data:
Mass = 147 gDensity = 1.010 g/mlSubstitute the values and calculate:
Volume = 147 g / 1.010 g/ml = 145.54 ml
Therefore, the volume of the urine sample is 145.54 ml.
This is formed when an atom loses an electron to another atom.
A cubic piece of metal measures 6.00 cm on each edge. If the metal is nickel, whose density is 8.90 g/cm3, what is the mass of the cube?
A cubic piece of metal measures 6.00 cm on each edge. If the metal is nickel, whose density is 8.90 g/cm3, then the mass of the cube would be 1922.4 grams.
What is density?It can be defined as the mass of any object or body per unit volume of the particular object or body. Generally, it is expressed as in gram per cm³ or kilogram per meter³.
By using the above formula for density
ρ = mass / volume
As given in the problem a cubic piece of metal measures 6.00 cm on each edge. If the metal is nickel, whose density is 8.90 g/cm³, then we have to find out the mass of the cube,
the edge of the cube = 6 centimeters
the volume of the cube = 6³ centimeter³
= 216 centimeter³
density = mass /volume
8.90 g/cm³=mass /216 cm³
mass of the cube = 216×8.90
mass of the cube = 1922.4 grams
Thus, the mass of the cube comes out to be 1922.4 grams
To learn more about density from here, refer to the link;
brainly.com/question/15164682
#SPJ2
Final answer:
To find the mass of the nickel cube, calculate the volume (216 cm³) and then multiply by the density of nickel (8.90 g/cm³), giving a mass of 1922.4 grams.
Explanation:
The student is asking about how to calculate the mass of a metal cube given the edge length and the density of the material, which in this case is nickel. To find the mass, you need to calculate the volume of the cube and then multiply by the density of nickel.
First, calculate the volume of the cube using the formula for the volume of a cube: V = edge length3. Here, the edge length is 6.00 cm, so V = 6.00 cm x 6.00 cm x 6.00 cm = 216.00 cm3.
Next, use the density of nickel which is 8.90 g/cm3 to find the mass: mass = density x volume. Substituting the values in gives you mass = 8.90 g/cm3 x 216.00 cm3 = 1922.4 grams.
What is the law of conservation of mass and how is it related to the results of a chemical reaction?
A solution contains the ions ag+ , pb2+ and ni2+. dilute solutions of nacl, na2so4 and na2s are available to separate the positive ions from each other. in order to effect separation, the solutions must be added in which order?
Answer:
Sequence will be:
NaCl
Na₂SO₄
Na₂S
Explanation:
The silver ions get precipitated on addition of chloride ion as silver chloride.
So we will add NaCl in the first step.
The following reaction will occur.
[tex]Ag^{+}+Cl^{-}--->AgCl(s)[/tex]
Lead and nickel are soluble in sodium chloride (lead chloride and nickel chloride).
[tex]Pb^{+2}[/tex] will get precipitated as lead sulfate and nickel will remain soluble as nickel sulphate is soluble in water.
The reaction will be:
[tex]Pb^{+2}+2SO_{4}^{-2}--->PbSO_{4}(s)[/tex]
Then nickel will be precipitated as sulfide.
The reaction will be:
[tex]Ni^{+2}+2Cl^{-} ---->NiCl_{2}(s)[/tex]
Pablo drove 260 miles using 12 gallons of gas. at this rate, how many gallons of gas would he need to drive 286 miles?
He ionic compound magnesium chloride has ____________ chloride ions for every one magnesium ion.
Answer:
2
Explanation:
Write the full ground state electron configuration of co3+ in abbreviated form
An atom of magnesium has 12 protons and 12 electrons. if the atom loses 2 electrons, what will be the charge on the ion that forms? –10 +10 +2 –2
Answer:
The charge will be +2.
Explanation:
The atomic number of Mg is 12, so it has 12 protons.
The neutral atom of Mg has 12 electrons.
When an atom loses electrons it acquire positive charge.
The charge developed is equal to the number of electrons removed.
So the charge developed will be +2.
The equation will be:
[tex]Mg--->Mg^{+2}+2e[/tex]
A negative charge is developed when atom accepts electrons.
Explain how the structure of lipids determines the polarity of the molecule
Final answer:
The polarity of a lipid molecule is influenced by its structure with a hydrophilic polar head and hydrophobic nonpolar tails, making it amphipathic, which explains its behavior in aqueous environments.
Explanation:
The polarity of lipid molecules is determined by their structure, which includes both polar and nonpolar parts. A typical phospholipid molecule has a polar phosphate head that is hydrophilic, meaning it is attracted to water, and nonpolar fatty acid tails that are hydrophobic, meaning they repel water and prefer to not be in contact with it. Phospholipids are amphipathic because they have these dual characteristics. Unsaturated fatty acids in the tails can create kinks that contribute to the fluidity and function. In water, phospholipids tend to arrange themselves into various structures like micelles, liposomes, or bilayers, with hydrophilic heads facing water and hydrophobic tails hidden away.
Normal faults form ________stress, reverse faults form __________stress and strike-slip faults form___________stress.
The answers are ; tension, compression, and shear respectively
Normal faults are formed when the two crust are moving away from each other and the hanging wall block moves downwards due to gravity.
In reverse faults, the two crusts move towards each other hence producing compressional force. This causes the hanging wall block to move up with respect to the footwall block
In strike-slip faulting, the two crusts move across each other resulting in shear stress and causing a dip feature.
Normal faults are caused by tensional stress, reverse faults are formed by compressional stress, and strike-slip faults are formed by shear stress usually at divergent, convergent and transform boundaries respectively.
Explanation:Normal faults form due to tensional stress, which is when the crust is being pulled apart. This generally happens in divergent plate boundaries. On the other hand, reverse faults form due to compressional stress, where the crust is being pushed together, which generally occurs at convergent plate boundaries. The third category, strike-slip faults are formed because of shear stress, when different parts of the crust slide past each other in opposite directions, which usually occurs at transform boundaries.
Learn more about Types of Faults here:https://brainly.com/question/2906243
#SPJ6