what is the difference between cytokinesis and mitosis

Answers

Answer 1
Mitosis is a process by which the duplicated genome in a cell is separated into halves that are identical in nature while Cytokinesis is the process where the cytoplasm of the cell divides to form two cells. 
Answer 2
Final answer:

Mitosis and cytokinesis are two processes in the cell division cycle. Mitosis refers to the division of the cell nucleus and occurs before cytokinesis. Cytokinesis is the final step that divides the cell into two separate daughter cells.

Explanation:

Mitosis and cytokinesis are two crucial processes in the cell division cycle. Mitosis refers to the division of the nucleus, where the contents of the nucleus get divided equitably and distributed between its two halves. This process is divided into four major stages: prophase, metaphase, anaphase, and telophase.

 Cytokinesis, however, occurs after mitosis and is the process that divides the cell's cytoplasm and body into two separate cells, becoming the final step in the cell division process. In animal cells, this usually begins during the late anaphase and involves a contractile ring composed of actin filaments. For plant cells, which have cell walls, the process is a bit different.

So basically, mitosis is the process by which the cell nucleus divides, whereas cytokinesis is the process that completes cell division by splitting the cell itself into two new cells.

Learn more about Mitosis vs Cytokinesis here:

https://brainly.com/question/32897291

#SPJ12


Related Questions

Which of these reactions involves an acid and a covalent base?
A. HF + KOH → H2O + KF
B. H2SO4 + 2NaOH → Na2SO4 + 2H2O
C. HNO3 + Al(OH)3 → Al(NO3)3 + H2O
D. H2SO4 + 2H2O → 2H3O+ + SO42–
E. chemical equilibrium

Answers

I think the correct answer would be D. The reaction that involves an acid and a covalent base would be the reaction of sulfuric acid and water or H2SO4 + 2H2O → 2H3O+ + SO42– . The acid would be H2SO4 and the covalent base would be H2O since it is being held by covalent bonds and when in solution it will have equal amounts of OH- and H+ ions.

helium is the lightest monatomic element is this a chemical property

Answers

No it wouldn't because of it was chemical, it would change into something completely different, for this reason, it would be physical property

Manuel wants to determine how fast a toy car will move across different surfaces. He lines 3 ramps with different surface covers including wax paper, sandpaper, and smooth carpet and runs the same car down each ramp to determine how long it takes for the car to reach the bottom. What is Manuel's independent variable in this experiment

Answers

The independent variable in an experiment is that which you can variate as you wish, to measure the change in other variable (the dependent variable).

So, in this experiment, Manuel's independent variable is the surface, which Manuel change to wax paper, sandpaper and smooth carpet to determine how long it takes the car to run from the top of the rampo to the botton.

Answer: the independent variable is the surface of the ramp.

Which statement best describes the process that the diagrams show?
A.) A solid loses kinetic energy to become a liquid and then becomes a gas.
B.) A solid gains kinetic energy to become a liquid and then becomes a gas.
C.) A gas loses kinetic energy to become a liquid and then becomes a solid.
D.) A gas gains kinetic energy to become a liquid and then becomes a solid.

Answers

B. This looks like ice turning to water then to steam

Answer is: B.) A solid gains kinetic energy to become a liquid and then becomes a gas.

Stage 2 is melting (from solid to liquid) and Stage 2 is boiling (from liquid to gas).

In solid, molecules are closely packed, stiff and do not changes of shape or volume. Solid object does not take on the shape of its container.

Liquids have definite volume, but no fixed shape.

Gases not have definite volume and fixed shape, it depends on its container.

what are the advantages of using a computer over a graphing calculator

Answers

The answer to this question is:

The advantages of using a computer over a graphing calculator is the the "Computer larger amount of data" then the graphing calculator 

Hope this helped, Laffertytyler20
Your Welcome :)

What cellular process converts solar energy into chemical energy

Answers

it is photosynthesis 

The modern periodic table is organized by:___________?
Possible Answers: atomic number,number of protons in each element,atomic weight,chemical properties,

Answers

the modern periodic table is organized by the atomic number
Final answer:

The modern periodic table is largely organized by the atomic number of each element. Although atomic weight and chemical properties also play a role, they come secondary to atomic number.

Explanation:

The modern periodic table is primarily organized on the basis of the atomic number of each element. The atomic number is equal to the number of protons in the nucleus of an atom of an element. While other factors such as atomic weight and chemical properties are also significant, they are considered secondary in the structure. For example, Hydrogen has an atomic number of 1, hence it is the first element in the Periodic Table. Similarly, Helium with an atomic number of 2 is the second element and so on.

Learn more about Organization of Periodic Table here:

https://brainly.com/question/18771645

#SPJ11

The upper quartile of a set of data is a number that __________. A. separates the bottom half of the data set from the upper half B. finding the mean of the data set remaining after removing the lower half C. separates the lower quarter of the data set from the upper three-quarters D. separates the lower three-quarters of the data set from the upper quarter

Answers

Answer:

D. separates the lower three-quarters of the data set from the upper quarter

Explanation:

The upper quartile is a line or a point that divides the upper half of a set of data in two exact parts, so when you get the median of the whole set of data, you take the upper half and calculate the median of that upper half, dividing the upper half in quartiles, and you get the division between the upper quartile and the other three quartiles.

the steps of scientific method in order are?

a. purpose , experiment, hypothesis , analysis , conclusion

b. purpose , hypothesis , experiment , analysis, conclusion

c. hypothesis , experiment , analysis, conclusion .

d. purpose, hypothesis, experiment , conclusion

Answers

The answer is choice B
I think it is D. hope this helps! :)

. How many moles of ammonia gas, NH3, are required to fill a volume of 50 liters at STP?

Answers

in STP every 22.4 litters is 1 mol

Answer:2.23 moles

Explanation:

According to avogadro's law, 1 mole of every substance weighs equal to its molecular mass , occupies 22.4 Liters at STP and contains avogadro's number [tex]6.023\times 10^{23}[/tex] of particles.

To calculate the number of moles, we use the equation:

[tex]\text{Number of moles}=\frac{\text{Given volume}}{\text{Molar volume}}=\frac{50}{22.4}=2.23moles[/tex]

Thus 2.23 moles of ammonia gas are required to fill a volume of 50 liters at STP.

A buret containing NaOH solution has an initial volume reading of 0.14 mL.
25.00 mL of 0.1000 M HCl is titrated to a phenolphthalein end point, which occurs at a final reading of 27.16 mL NaOH. What is the molarity of the NaOH titrant?

Answers

IF molarity is in mol/dm3 then
Number of moles of HCL = 25/1000 x 0.1000=0.0025moles
Number of moles of NaOH= 0.0025 moles As 1 is to 1 ratio among them as from equation
      NaOH+HCL=NaCL+H20
Volume of NaOH used=27.16-0.14 ml=27.02ml
moles=volume x molarity
0.0025=27.02/1000 x molarity
ANSWER molarity of NaOH=0.0925 mol/dm3 

Answer:

0.092 M

Explanation:

NaOH(aq) + HCl(aq) ------> NaCl(aq) + H2O(l)

CA= concentration of acid= 0.1000 M

CB= concentration of base= ?????

VA= volume of acid= 25.00 mL

VB= volume of base= 27.16 mL

NA= number of moles of acid= 1

NB= number of moles of base= 1

CAVA/CBVB= nA/nB

CB= CAVAnB/VBnA

CB= 0.1000 M × 25.00 mL ×1/27.16 mL ×1

CB= 0.092 M

]Aluminum ions form an ionic bond with chromate ions, and the resultant formula is Al2(CrO4)3. What is the ion charge for the chromate ion?

Answers

2-. Aluminium has a charge of 3+, which is why there are 3 chromate ions, and chromate has a charge of 2-, so there are 2 aluminium ions: you swap the charges of each ion to be the subscript for the other ion. Hope this helped :)
Final answer:

In the compound Al2(CrO4)3, the aluminum ion (Al) has a 3+ charge. To balance the electrical neutrality, each chromate ion (CrO4) must have a 2- charge since three of them are needed to balance the 6+ charge from two aluminum ions.

Explanation:

Chromate ion has a charge of 2-. When forming an ionic bond with aluminum ions which have a 3+ charge, the formula becomes Al2(CrO4)3.

To determine the ion charge for the chromate ion in the compound Al2(CrO4)3, we must first understand the charges of the ions involved. Aluminum (Al) forms a cation with a 3+ charge, as indicated by the formula. Since the formula of the compound is electrically neutral and contains two aluminum ions, the total positive charge contributed by aluminum is 6+ (2 ions * 3+).

The compound then must have an equivalent total negative charge to balance this, contributed by three chromate (CrO4) ions. For the charges to balance out, each chromate ion must carry a 2- charge (6+ from Al3+ is balanced by 6- from three 2- ions), making the formula for the ionic compound Al2(CrO4)3 electrically neutral. Therefore, the chromate ion has a 2- charge in this compound.

Give the chemical symbol of an element in the third period (row) of the periodic table with three valence electrons. Express your answer as a chemical symbol

Answers

Aluminium or Al has 13 electrons. 2 fall into the first energy level and 8 fall into the second energy level which means there are 3 more electrons in the outermost energy level, meaning you have 3 valence electrons.

What is the mass of exactly 1 mol of the following elements osmium, Cesium, krypton?

Answers

190.23: Osmium

132.90545: Cesium

83.798: Krypton

in which situation can a mixture always be called a solution

Answers

A solution is when a solute is dissolved by a solvent. Mixture is practically when one doesn't dissolve or doesn't combine chemically and thus becomes a cloudy or foggy.
If I'm not wrong... A mixture is never a solution.

Answer: when the mixture is homogeneous

Explanation:

The observations and results of Thomson’s cathode ray experiment led to what change to the atomic model?

Answers

In short, Thompson's cathode ray experiment led to the identification of electrons in an atom. The experiment showed that all atoms have subatomic particles with a negative charge. This allowed Thompson to develop the rough model of the atom that we are familiar with today.

"the addition of negatively charged electrons" is the answer.

How many significant figures are there in the measurement 0.003 kg? A. 1 B. 2 C. 3 D. 4

Answers

I'm almost certain its C. 3
I hope this helps and let me know if it's correct!
There's only 1, 0's don't count as significant figures unless after the 3

Which of the following represents a purely covalent bond?

Ne – Ne

Na – Na

N – N

Ni – O

Answers

The answer is N - N.

Purely covalent bond is formed by sharing electrons of atoms with same electronegativity to meet the octet rule (2 or 8 electrons in the valence shell).

Ne is a noble gas and has already 8 electrons in the valence shell, so it will not form a Ne - Ne bond.

Na is an alkaly metal with 1 electron in the valence shell and it does not form a true ionic bond but what is known a metallic bond.

N is a gas that forms a diatomic molecule N - N by sharing the valence electrons in a purely covalent bond.

Ni - O is a metal - non metal compound so it has a ionic character.

Violent shaking from an earthquake can cause soil and rock on slopes to fall and cause a _____.

Answers

The answer is Landslide 
It would cause a landslide as it is earth falling down a hill.

Because solubility is a characteristic property of matter, it can be used to help identify a substance. t or f

Answers

Solubility is a physical property. Physical properties can be used to identify a pure substance.

True

This is a true statement.

complete the tables of value for four aqueous solutions at 25 celcius

Answers

There are a total of four parameters you need to know to determine the pH of the solution. The pH and the pOH are negative logarithms of the concentrations of the ions H+ and OH-, respectively. These ions are the solvated ions of in an acid-base reaction. The equations are as follows:

pH = -log [H+]
pOH = -log [OH-]

Lastly, the pH range is from 1 to 14. So, it is easier to remember that pH + pOH is equal to 14. So, we use these three equations for the solutions.

Solution A:
pH = -log(6.4×10^-13) = 12.2
pOH = 14 - 12.2 = 1.8
1.8 = -log[OH-]
[OH-] = 0.016 M


Solution B:
pOH = -log(2.7×10^-10) = 9.6
pH = 14 - 9.6 = 4.4
4.4 = -log[H+]
[H+] = 3.98×10^-5 M


Solution C:
8.11 = -log(H+)
H+ = 7.76×10^-9
pOH = 14 - 8.11 = 5.89
5.89 = -log[OH-]
[OH-] = 1.288×10^-6 M


Solution D:
pH = 14 - 4.73 = 9.27
9.27= -log[H+]
[H+] = 5.37×10^-10 M
4.73 = -log[OH-]
[OH-] = 1.862×10^-5 M

The table of values for four aqueous solutions at   is as shown in Table 1.

Further Explanation:

The negative logarithm of hydrogen ion concentration is termed as pH while that of hydroxide ion concentration is pOH. Higher the pH of solution, more will be the alkalinity and vice-versa. Similarly, higher value of pOH indicates solution is acidic in nature .

The expression for pH is mentioned below.

[tex]\text{pH}=-\text{log}\left[\text{H}^+\right][/tex]                                             ...... (1)

Where [tex]\left[\text{H}^+\right][/tex]  is the concentration of hydrogen ion.

The expression for pOH is mentioned below.

[tex]\text{pOH}=-\text{log}\left[\text{OH}^-\right][/tex]                                        ...... (2)

Where [tex]\left[\text{OH}^-\right][/tex]  is the concentration of hydroxide ion.

pH and pOH are related to each other by following expression:

pH + pOH = 14                                               …… (3)

Solution A:

Substitute [tex]6.4\times10^{-13}\text{ M}[/tex]  for [tex]\left[\text{H}^+\right][/tex]  in equation (1).

[tex]\begin{aligned}\text{pH}=&-\text{log}\left[6.4\times10^{-13}\text{ M}\right]\\=&12.2\end{aligned}[/tex]

Rearrange equation (3) for pOH.

pOH = 14 – pH                                                                          …… (4)

Substitute 12.2 for pH in equation (4).

[tex]\begin{aligned}\text{pOH}=&14-12.2\\=&1.8\end{aligned}[/tex]

Rearrange equation (2) for [tex]\left[\text{OH}^-\right][/tex]  .

[tex]\left[\text{OH}^-\right]=10^{-\text{pOH}}[/tex]                                                                        …… (5)

Substitute 1.8 for pOH in equation (5).

[tex]\begin{aligned}\left[\text{OH}^-\right]=&10^{-\text{1.8}}\\=&0.016\text{ M}\end{aligned}[/tex]

Solution B:

Substitute  [tex]2.7\times10^{-10}\text{ M}[/tex] for [tex]\left[\text{OH}^-\right][/tex]  in equation (2).

[tex]\begin{aligned}\text{pOH}=&-\text{log}\left[2.7\times10^{-10}\text{ M}\right]\\=&\ 9.6\end{aligned}[/tex]

Rearrange equation (3) for pH.

pH = 14 – pOH                                                                                 …… (6)

Substitute 9.6 for pOH in equation (6).

[tex]\begin{aligned}\text{pH}=&14-9.6\\=&4.4\end{aligned}[/tex]

Rearrange equation (1) for [tex]\left[\text{H}^+\right][/tex] .

[tex]\left[\text{H}^+\right]=10^\text{-pH}[/tex]                                                                                        …… (7)  

Substitute 4.4 for pH in equation (7).

[tex]\begin{aligned}\left[\text{H}^+\right]=&10^\text{-4.4}\\=&0.0000398\text{ M}\end{aligned}[/tex]

Solution C:

Substitute 8.11 for pH in equation (7).

[tex]\begin{aligned}\left[\text{H}^+\right]=&10^\text{-8.11}\\=&0.0000000078\text{ M}\end{aligned}[/tex]

Substitute 8.11 for pH in equation (4).

[tex]\begin{aligned}\text{pOH}=&14-8.11\\=&5.89\end{aligned}[/tex]

Substitute 5.89 for pOH in equation (5).

[tex]\begin{aligned}\left[\text{OH}^-\right]=&10^{-\text{5.89}}\\=&0.000001288\text{ M}\end{aligned}[/tex]

Solution D:

Substitute 4.73 for pOH in equation (5).

[tex]\begin{aligned}\left[\text{OH}^-\right]=&10^{-\text{4.73}}\\=&0.00001862\text{ M}\end{aligned}[/tex]

Substitute 4.73 for pOH in equation (6).

[tex]\begin{aligned}\text{pH}=&14-4.73\\=&9.27\end{aligned}[/tex]

Substitute 9.27 for pH in equation (7).

[tex]\begin{aligned}\left[\text{H}^+\right]=&10^\text{-9.27}\\=&0.0000000005\text{ M}\end{aligned}[/tex]

Learn more:

1. Write the chemical equation responsible for pH of buffer containing   and  : https://brainly.com/question/8851686

2. Reason for the acidic and basic nature of amino acid. https://brainly.com/question/5050077

Answer details:

Grade: High School

Chapter: Acids, base and salts

Subject: Chemistry

Keywords: pH, pOH, H+, OH-, solution A, solution B, solution C, solution D, hydrogen ion, hydroxide ion, negative logarithm.

why is it important to have a controlled experiment

Answers

It is important to have a control group in your experiment so you are able to compare your actual results to the control group
By the end of the day you know how much each group ate, abd you compare it with the control.In convlution,control is important because without it you'd have no way to understand the results after and experiment happens.

What is the frequency of a 6.14 x 10^4 m wave

Answers

From the information give, I'm going to assume the wave is in a vacuum...

You use the equation: f= [tex] \frac{C}{Wavelength} [/tex] where c is the constant for speed of light ([tex]3.00 x 10^{8}[/tex]

so f= [tex] \frac{3.00x10^{8}}{6.14x10^{4}} [/tex]

f= 4.89 x [tex]10^{3}[/tex] Hz (approximately)

CH2 - CH2 - CH3
|
CH3 - CH2 - CH - CH2 - CH = CH2

Answers

The name of that product is 1-nonene.

The sufix ene is because it is an alkene, which comes from the fact that it has a double bond.

The prefix none is because it has 9 carbon.

And the use of number 1 is because the double bond is in the carbon number 1.

Which is a way that the model of the atom became more accurate due to new investigations? Select one: A. Experiments showed that the atom is made of smaller particles. B. Neutrons were detected orbiting the nucleus. C. Cathode-ray tube experiments showed that the atom is indivisible. D. Thomson showed that the atom contains alpha particles.

Answers

A. Experiments showed that the atom is made of smaller particles. Reason being: neutrons don't orbit the nucleus, the atom is not invisible, and alpha particles are larger than hydrogen atoms, which cancels out the possibility of atoms consisting of them (you can't be made of something larger than yourself).

Answer: The correct answer would 100% be A.  Experiments showed that the atom is made of smaller particles.

just took the test and got it right

how many molecules are in 12.5g of water (H20)

Answers

I think you convert grams to moles and then multiply the moles by Avogadro's number aka the number of atoms per mole.
So 12.5g x 1mole/18.016g = .69
.69 x (6.22 x 10^23) = 4.29 molecules

The number of molecules in  12.5 g water is equal to 4.18 × 10²³ molecules.

What is Avogadro's number?

Avogadro’s constant can be defined as the proportionality constant that uses to count the number of constituents such as ions, molecules, and atoms in the amount of substance in a sample.

Avogadro's constant can be defined as the approximate number of nucleons per gram of substance. The value of the Avogadro number is the mass of 1 mole of a compound, in grams, and is equal to the number of nucleons in 1 constituent particle.

The value of Avogadro’s constant is experimentally found to be approximately equal to 6.022×10²³ per mole.

The mass of the water = 12.5 g

The molar mass of the water = 18 g

The number of moles of the water = 12.5/18 = 0.694 mol

The number of molecules of water in one mole = 6.022 × 10²³

Number of molecules of water in 0.694 mol = 6.022 × 10²³× 0.694

= 4.18 × 10²³ molecules

Learn more about Avogadro's number, here:

brainly.com/question/11907018

#SPJ3

Which of the following is an example use of a noble gas? a. Making steel drums c. Camera batteries b. Fluorescent light tubes d. Xerox machines

Answers

The answer is Fluorescent light tubes
Fluorescent light tubes because they manipulate the gas to create a more energy efficient light than traditional light bulbs.

How is scientific use of the term digital different from the common use?

Answers

Do you want to be a scientist or not because I can help you with that it's so easy

We commonly know refer to something 'digital' has to something electronic that can be visibly seen such as a watch, clock, camera, screen, etc.  It really refers to stored energy or electricity that's not natural.  But the word 'digital' in science refers to the depiction of data or information in figures (such as in a table) in contrast to as a chart, graph, drawing, or other pictorial form.

Explanation:

The scientific use of the term digital is much changed from the current use because the term digital in science is a way of representing a discontinuous phenomenon or something this is just finite and faulty. It also describes a data in figures with the use of this term. While “digital” generally refers to electronics in general, the scientific explanation of digital is much different

is MgCO3 an base or acid

Answers

Ammonia is a (Lewis) base. Ammonium hydroxide (not ammonia) is a base. Ammonium hydroxide: NH4OH (ammonia gas dissolved in water) Ammonia: NH3

In an experiment, a student gently heated a hydrated copper compound to remove the water of hydration. the following data was recorded:

1. mass of the crucible, cover and contents before heating 23.4g.

2. mass of empty crucible and cover.

3. mass of crucible, cover, and contents after heating to constant mass 20.94g

Answers

The unknown of this problem is the experimental percent of water in the compound in order to remove the water of hydrogen, given the following:

Mass of crucible, cover and contents before heating                               23.54 g
Mass of empty crucible and cover                                                            18.82 g
Mass of crucible, cover, and contents after heating to constant mass     20.94 g

In order to get the answer, determine the following:

Mass of hydrated salt used                          = 23.54 g – 18.82 g = 4.72 g
Mass of dehydrated salt after heating          = 20.94 g – 18.82 g = 2.12 g
Mass of water liberated from salt                 = 4.72 g – 2.12 g = 2.60 g

Then solve the percent of water in the hydrated salt by:

% water = (mass of water / mass of hydrated salt) x 100
% water = 2.60 g / 4.72 g x 100
% water = 55.08 % in the compound 
Other Questions
Who is popularly credited with coining the term "rock and roll"? Being tired has very similar effects on the body as Old ageAlcohol Pain killers Inexperience What was the agreement in which the united states would remain neutral, or not take a side in the the french revolution? Which of these events resulted from the terms of the peace treaty that ended the Spanish-American War? A.The Mexican-American War B.The Puerto Rico-American War C.The Guam-American War D.The Philippine-American War Tell us about a time when you showed honesty and integrity in working with confidential information. why it is difficult to calculate the Earth's carrying capacity for the human population Which literal detail of the Inferno most likely connects to the symbolic idea of "going in a spiritual journey within oneself"? A.Dante begins to see Virgil as a father figure. B.Dante journeys from the outer circle to the inner circles of Hell. C.Dante compares the modern world to the world of Hell. D.Dante is confused because he has not yet encountered Lucifer in Hell. For an angle with the point (20, 21) on its terminating side, what is the value of cosine? As article i, section 4, of the constitution states, "the times, places and manner of holding elections for senators and representatives, shall be prescribed __________." 12.5% of what is 130? Which sentence best describes the independent and dependent variables in the following problem? The parking garage charges $3 for the first hour of parking and $1.45 for each additional hour.Which sentence best describes the independent and dependent variables in the following problem? The parking garage charges $3 for the first hour of parking and $1.45 for each additional hour. eight times the sum of a and b Explain how you can use place value patterns to describe how 50 and 5000 compare Can you be very healthy and never exercise? Science is best described as a alist of rules. bway of knowing. ccollection of beliefs. dset of facts. This sequence represents the diameters of circles used to create an art project: 2.5 cm, 3.1 cm, 3.7 cm, 4.3 cm Let f(n) represent diameter in centimeters and n the term number in the sequence. Which equation represents the sequence of diameters? The total bonding energy for the products of a reaction is 2535 kJ/mol and the bonding energy of the reactants is 1375 kJ/mol. Calculate the change in enthalpy, and classify the reaction as endothermic or exothermic. How to factor 2p^4+9p^3-18p^2 Referring to a keynesian phillips curve, a reduction in inflation is likely to cause: ____________. at least a slight increase in aggregate demand. a vertical phillips curve because aggregate supply remains fixed. unemployment to remain constant in the long run. at least a slight increase in unemployment. (Picture) please help asap! Steam Workshop Downloader