The concentrations of Na+ and SO42- ions after dissolving 0.500 mol Na2SO4 in water and diluting to 1.33 L are respectively 0.752 mol/L and 0.376 mol/L.
Explanation:
The question asks for the calculation of concentrations of Na+ and SO42- ions after dissolving 0.500 mol Na2SO4 in water and diluting to 1.33 L.
For each formula unit of Na2SO4 that dissolves, two Na+ ions and one SO42- ion are produced. Therefore, we expect the concentration of Na+ ions to be twice that of the SO42- ions.
Concentration is calculated using the formula: Concentration = Moles/Volume. By substituting the values, we get: Concentration of Na2SO4= 0.500 mol / 1.33 L = 0.376 mol/L. As previously mentioned, the concentration of Na+ ions is double this, so it is 0.376 x 2 = 0.752 mol/L, while the concentration for SO42- ions remains 0.376 mol/L.
Learn more about Chemistry Solution Concentrations here:https://brainly.com/question/33888922
#SPJ3
Diatomic molecules will be nonpolar when _____.
A) a pair of shared electrons is located closer to one atom than the other.
B) both atoms are the same element.
C) there is a difference in electronegativity.
D) atoms have a different number of protons.
Answer: -
Diatomic molecules will be non polar when
B) both atoms are the same element.
Explanation: -
Non polar means the electrons in a bond between the two atoms are present at the same distance from the two atoms.
The electrons get closer to one atom over the other if the electronegativity if different.
The difference in electronegativity arises due to different number of protons.
Thus, Diatomic molecules will be non polar when
B) both atoms are the same element.
A container has a mass of 1293 metric tons. What is the mass of the container in grams?
Answer:
hello
Explanation:
A magma cools the first minerals to ____ are rich in iron, calcium and magnesium
I think the answer is form
Which molecule is usually comprised of six carbons in a ring (with six sides)?
Will give BRAINLIEST!!!!!
Write an equation for the reaction if one occurs.
(a) Iron (III) with CuSO4 solution
(b) Copper (I) with FeSO4 solution
(c) Tin (IV) with Cu (NO3) 2 solution
Write a complete set of quantum numbers for the fifth electron added to a hydrogen ion (i.e., the fifth electron in any electron configuration).
Answer:
Explanation:
In atoms, there are a total of four quantum numbers: the principal quantum number (n), the orbital angular momentum quantum number (l), the magnetic quantum number (ml), and the electron spin quantum number (ms).
The Hydrogen ion has no electron to begin with, so upon adding five electrons, it's electronic configuration becomes;
Is2 2s2 2p1
The principal quantum number (n) = 2 (Second energy level)
The value of l is dependent on the principal quantum number n. Unlike n, the value of l can be zero. It can also be a positive integer, but it cannot be larger than one less than the principal quantum number (n-1):
Hence, l = 2-1 = 1
The magnetic quantum number ml determines the number of orbitals and their orientation within a subshell. Since ml must range from –l to +l, then ml can be: --1, 0, or 1.
Unlike n, l, and ml, the electron spin quantum number ms does not depend on another quantum number. It designates the direction of the electron spin and may have a spin of +1/2, represented by↑, or –1/2, represented by ↓
A substance containing atoms of two or more different elements chemically bonded together is called what
your friend just challenged you to a race. you know in order to beat him, you must run 15 meters within 20 seconds in a northern direction. what does your average velocity need to be to win the race? (2 points) .5 meters per second, north .75 meters per second, north 1.3 meters per second, north 300 meters per second, north
Does the reaction of a burning candle give off or absorb heat
A lily plant on a pond is an example of which food chain level
Final answer:
A lily plant on a pond is an example of a primary producer in a food chain.
Explanation:
In a food chain, the organisms are classified into different trophic levels based on their feeding habits. The first trophic level includes the primary producers, which are typically photosynthetic organisms like plants or phytoplankton. The organisms that consume the primary producers are known as primary consumers, and they belong to the second trophic level. The lily plant in a pond would be considered a primary producer, which is part of the first trophic level in the food chain.
When a rock falls from outer space all the way to the groung, its called a?
What are the elements with atomic numbers from 58 to 71 in the periodic table called?
When iron(III) nitrate dissolves in water, what ion is attracted to the oxygen atom of the water molecule? What ion is attracted to the hydrogen atoms?
Round 0.0952 km to 2 significant figures:
A: 0.09
B: 0.095
C: 0.1
Answer :
The correct answer is option B.
Explanation :
Significant figures : The figures in a number which express the value of magnitude of a quantity to a specific degree of accuracy is known as significant digits.
Given value = 0.0952
[tex]0.0952 km\approx 0.095 km[/tex]
'Zeros' before and after decimal point are insignificant. But when 'zeros' is coming between two numerals then it is count as significant.
What happens when you put the wrong chemicals together.?
An atom contains 3 protons, 4 neutrons, and 3 electrons. what is its mass number
Explain why samples of platinum and copper can have the same extensive properties but not the same intensive properties
What changes occur at the molecular level when ice cream melts and forms a liquid?
Explanation:
It is known that before melting ice cream is present in a solid state so, its molecules are much closer due to which it has retained its shape.
But as its molecules absorb energy from the surroundings the they tend to gain kinetic energy. Due to this there will be increase in collision between its particles and they will move apart from each other. As a result, ice cream will start to melt.
Therefore, when ice cream melts and forms a liquid then molecules move away from each other at the molecular level.
How can we see all four colors from a hydrogen gas discharge tube simultaneously?
We can see all four colors from a hydrogen gas discharge tube simultaneously by passing the light through a prism or diffraction grating, separating the light into its constituent wavelengths. These wavelengths result from the process of electrons cascading down through the different energy levels of the hydrogen atoms, emitting energy as light. This process, known as fluorescence, allows us to view the four colors simultaneously.
Explanation:To see all four colors from a hydrogen gas discharge tube simultaneously, one must understand the concept of emission lines and how a tube of hydrogen gas generates light. When an electric discharge passes through the tube, the H₂ molecules are separated into individual H atoms and light is emitted. This light is typically blue-pink in color due to the individual wavelengths of light, or photons, released.
A helpful illustration of this can be gained by passing the gas's light through a prism or diffraction grating, producing a line spectrum. This process separates the light into its constituent wavelengths, yielding four distinct colors that can be perceived simultaneously. Each emission line represents a different color because each line corresponds to a single wavelength of light, with each wavelength correlating to a specific energy level.
These wavelengths are a result of the electrons captured by the hydrogen nuclei cascading down through the different energy levels and emitting energy in the form of light. This is a process known as fluorescence, and it allows us to view the four colors from a hydrogen gas discharge tube at the same time.
Learn more about Emission Lines here:https://brainly.com/question/33462089
#SPJ12
The four colors in a hydrogen gas discharge tube can be seen simultaneously when the light emitted by charged H atoms is passed through a prism or diffraction grating. These colors are a result of electrons transitioning between different energy levels within the hydrogen atom, each transition emitting photons of a specific wavelength and hence a specific color.
Explanation:To see all four colors from a hydrogen gas discharge tube simultaneously, we utilize a phenomenon known as the emission spectrum. When an electric discharge passes through a tube containing hydrogen gas at low pressure, the H₂ molecules are broken apart into separate H atoms. This action produces light, a blue-pink color that is a combination of photons of four visible wavelengths. This light, when passed through a diffraction grating or a prism, separates into its constituent wavelengths, each representing a specific color.
The emission lines are a result of electrons in the hydrogen atoms moving between different energy levels. When electrons move from a higher energy level to a lower one, they emit energy in the form of photons, the discrete packets of light. The frequency and color of the light emitted depend on the energy difference between the two levels. For instance, the red hydrogen line is from the transition that releases the most energy.
The emission spectrum of hydrogen, notably, consists of lines of four distinct colors: red, blue, violet, and a second, fainter red. The presence of these four different emission lines corresponds to the four unique transitions that the electrons in a hydrogen atom can undergo. Therefore, when you look at the hydrogen gas discharge tube, you are actually seeing the combined light from millions of these transitions occurring simultaneously.
Learn more about Spectral Lines here:https://brainly.com/question/27494244
#SPJ12
A modern penny weighs 2.5 g but contains only 0.063 g of copper (cu). how many copper atoms are present in a modern penny?
Answer:
[tex]5.969\times 10^{20} atoms[/tex] are present in a modern penny.
Explanation:
Mass of copper in modern penny = 0.063 g
Moles of copper : n
[tex]n=\frac{0.063 g}{63.55 g/mol}=0.0009913 mole[/tex]
Number of copper atoms in 0.0009913 mole = n
[tex]N=n\times N_A[/tex]
[tex]N=0.0009913 mol\times 6.022\times 10^{23} mol^{-1}=5.969\times 10^{20} atoms[/tex]
There are 5.97×10²⁰ atoms of copper in the penny.
From Avogadro's hypothesis, we understood that 1 mole of any substance contains 6.02×10²³ atoms.
This implies that 1 mole of copper, Cu contains 6.02×10²³ atoms.
Recall:
1 mole of copper = 63.55 g
Thus,
63.55 g of Cu = 6.02×10²³ atomsFinally, we shall determine the number of atoms present in 0.063 g of copper, Cu. This can be obtained as follow:
63.55 g of Cu = 6.02×10²³ atoms
Therefore,
0.063 g of Cu = 0.063 × 6.02×10²³ / 63.55
0.063 g of Cu = 5.97×10²⁰ atomsThus, 0.063 g of Cu contains 5.97×10²⁰ atoms
Therefore, we can conclude that there are 5.97×10²⁰ atoms of copper in the penny.
Learn more: https://brainly.com/question/24655338
Which element is present in all amino acids but not necessarily in fats or carbohydrates?
The element that is present in all amino acids but not necessarily in fats or carbohydrates is Nitrogen. This is due to the amino and carboxyl groups present in all amino acids, both of which contain Nitrogen atoms.
Explanation:The element present in all amino acids but not necessarily in fats or carbohydrates is Nitrogen. This is due to the structure of amino acids, which all contain an amino group (-NH2) and a carboxyl group (-COOH). Both of these groups contain Nitrogen atoms.
As name implies, "amino acid", these molecules consist of both an amino group and a carboxyl group. This basic structure is common to all 20 types of amino acids found in proteins. A variation in each amino acid is the R group (or side chain), which differs for each amino acid.
However, carbohydrates are composed of carbon, hydrogen, and oxygen, and fats are composed of glycerol and fatty acids, which also contain carbon, hydrogen, and oxygen atoms. So, they may not necessarily contain Nitrogen, which makes Nitrogen a unique constituent of amino acids.
Learn more about Amino Acids here:https://brainly.com/question/31442968
#SPJ12
What are some of the techniques by which mixtures can be resolved into their components?
An atom of magnesium has lost two electrons. it is known as a(n) ________. an atom of magnesium has lost two electrons. it is known as a(n) ________. cation molecule anion neutral atom isotope
Answer: Option (a) is the correct answer.
Explanation:
Atomic number of magnesium is 12 and electrons are distributed in its shell as 2, 8, 2. So, in order to attain stability magnesium easily loses two electrons.
Therefore, there will be decrease in number of electrons as a result, a positive charge will occur and thus, a cation will be formed.
Thus, we can conclude that an atom of magnesium has lost two electrons. It is known as a cation.
Final answer:
In Chemistry, a neutral atom becoming a cation by losing electrons is explained. Metals like magnesium form cations by losing electrons based on the periodic table. Predicting the formation of cations using the periodic table is highlighted.
Explanation:
Cation: When an atom loses electrons, it becomes positively charged and is called a cation. For example, a magnesium atom that loses two electrons forms a Mg2+ cation as it aims to achieve the electron configuration of a noble gas.
Metal Ions: Metals tend to form cations by losing electrons. A metal like magnesium in group 2 loses two electrons to form a 2+ cation, and the resulting ion is named after the metal itself, like Mg2+ as a magnesium ion.
Periodic Table: The periodic table guides us in predicting whether an atom will form an anion or cation. Main-group metals lose electrons to achieve noble gas configurations, leading to the formation of cations with predictable charges.
Which particles in the gas phase are attracted with the weakest intermolecular forces? in water?
Answer:
Nitrogen in the gas phase is attracted by weaker inter-molecular forces.
Further details:
Nitrogen has London dispersion forces which have weak inter-molecular interactions.
London dispersion forces:
The London dispersion force is the feeblest inter-molecular force, and is a temporary attractive force that results when the electrons in two adjacent atoms positions that make the atoms form transitory dipoles. This force is sometimes called an induced dipole attraction. London forces are the attractive forces that root non-polar substances to reduce to liquids and to freeze into solids when the temperature is dropped adequately.
London force (fluctuating dipole–induced dipole), which rises due to the non-zero immediate dipole moments of all atoms and molecules is a type of weak inter-molecular interaction. Such polarization can be persuaded either by a polar fragment or by the repulsion of negatively charged electron clouds in non-polar molecules. Thus, London interactions are produced by accidental variations of electron compactness in an electron cloud. An atom with a large number of electrons will have a greater related London force than an atom with fewer electrons. The dispersion (London) force is the most significant constituent because all materials are polarizable, whereas Keesom and Debye forces need permanent dipoles. The London interaction is universal and is present in atom-atom interfaces as well. For numerous causes, London interactions (dispersion) have been deliberated relevant for interactions between macroscopic bodies in reduced systems.
Answer details:
Subject: Chemistry
Level: High school
Keywords:
• Nitrogen
• London dispersion forces
• Weak molecular attraction
Learn more to evaluate:
https://brainly.com/question/4997492
https://brainly.com/question/4010464
https://brainly.com/question/1754173
Nitrogen reacts with hydrogen to produce ammonia gas as follows.
mc023-1.jpg
How many moles of nitrogen would react with excess hydrogen to produce 520 mL of ammonia?
0.0116 mol
0.012 mol
0.0232 mol
0.024 mol
Final answer:
In the given reaction, 1 mole of nitrogen reacts with 3 moles of hydrogen to produce 2 moles of ammonia. Given a volume of 520 mL of ammonia, the number of moles of nitrogen required can be calculated using the ideal gas law. The correct answer is 0.0232 mol.
Explanation:
In the given reaction, 1 mole of nitrogen reacts with 3 moles of hydrogen to produce 2 moles of ammonia. From the information provided in the question, the volume of ammonia produced is 520 mL. To calculate the number of moles of nitrogen required, we can use the balanced equation:
1 mole N2 : 3 moles H2 : 2 moles NH3
Therefore, 520 mL of NH3 is equivalent to 520/1000 L = 0.52 L
Using the ideal gas law, we can calculate the number of moles of NH3:
moles = (volume in liters) / (molar volume)
moles = (0.52 L) / (22.4 L/mol) = 0.0232 mol
Therefore, the correct answer is 0.0232 mol.
The correct answer is 0.0116 mol of nitrogen would react with excess hydrogen to produce 520 mL of ammonia.
To solve this problem, we need to use the stoichiometry of the balanced chemical equation for the reaction between nitrogen [tex](N_2)[/tex] and hydrogen [tex](H_2)[/tex] to form ammonia [tex](NH_3)[/tex]. The balanced equation is:
[tex]\[ N_2(g) + 3H_2(g) \rightarrow 2NH_3(g) \][/tex]
From the ideal gas law, we know that:
[tex]\[ PV = nRT \][/tex]
where:
- [tex]\( P \)[/tex] is the pressure,
- [tex]\( V \)[/tex] is the volume,
- [tex]\( n \)[/tex] is the number of moles,
- [tex]\( R \)[/tex] is the ideal gas constant, and
- [tex]\( T \)[/tex] is the temperature in Kelvin.
We can rearrange the ideal gas law to solve for the number of moles [tex]\( n \)[/tex]:
[tex]\[ n = \frac{PV}{RT} \][/tex]
Given that the volume [tex]\( V \)[/tex] of ammonia is 520 mL (or 0.520 L), we need to convert this to liters for the calculation. The pressure [tex]\( P \)[/tex] and temperature [tex]\( T \)[/tex] are not given, so we assume standard temperature and pressure (STP) conditions, where [tex]\( P = 1 \) atm[/tex] and [tex]\( T = 273.15 \) K[/tex]. The value of [tex]\( R \)[/tex], the ideal gas constant, is 0.0821 L·atm/(mol·K).
First, let's calculate the number of moles of ammonia produced:
[tex]\[ n_{NH_3} = \frac{PV}{RT} \][/tex]
[tex]\[ n_{NH_3} = \frac{(1 \text{ atm})(0.520 \text{ L})}{(0.0821 \text{ L.atm/(mol.K)})(273.15 \text{ K})} \][/tex]
[tex]\[ n_{NH_3} = \frac{0.520}{22.41} \][/tex]
[tex]\[ n_{NH_3} \approx 0.0232 \text{ mol} \][/tex]
Now, using the stoichiometry of the balanced equation, we know that 2 moles of [tex]NH_3[/tex] are produced from 1 mole of [tex]N_2[/tex]. Therefore, to find the moles of [tex]N_2[/tex] that reacted, we divide the moles of [tex]NH_3[/tex] by 2:
[tex]\[ n_{N_2} = \frac{n_{NH_3}}{2} \][/tex]
[tex]\[ n_{N_2} = \frac{0.0232 \text{ mol}}{2} \][/tex]
[tex]\[ n_{N_2} = 0.0116 \text{ mol} \][/tex]
Thus, 0.0116 mol of nitrogen would react with excess hydrogen to produce 520 mL of ammonia under STP conditions. This matches option (a) 0.0116 mol.
Bears and salmon have a predator - prey relationship . What would most likely happen to the bear population if the salmon population increase ?
Which of the following is a mixture?
a.) Mercury
b.) Alcohol
c.) Ink
d.) Water
Chlorine has the electron configuration 1s22s22p63s23p5. how many valence electrons does it have?
Chlorine has total 17 electrons in its atom. Out which 10 are inner or core electrons and 7 are valence electrons located in the 3s and 3p shells.
What is chlorine ?Chlorine (Cl) is 17th element in periodic table. It is a non metal located in the 17th group of periodic table. Cl contains 17 electrons and 17 protons. It have an atomic mass of 35.5 g/mol.
Out of the 17 electrons, 10 electrons of Cl are located in the inner shells or orbitals 1s, 2s, and 2p. The remaining 7 electrons are located in the valence shells 3s and 3p. 2 electrons in 3s orbital and 5 electrons in 3p orbital.
Cl needs one more electron to achieve octet in valence shell. Hence, it is a highly electronegative atom forming ionic bonds with metals as well covalent bonds with other nonmetals.
Find more on chlorine:
https://brainly.com/question/14962130
#SPJ6
In subatomic particles what changes and what remains the same in isotopes
Breaking which type of bond would require the most energy?