watches a 2000 klilogram car crash into a wall with a force of 30000 newtons. what is the acceleration of the car at impact?

Answers

Answer 1
mass=2000 kg
force = 30000 N
a= force /mass
a=30000/2000
a=15 m/second square

Related Questions

If an electric train is travelling south, which way is the smoke going?

Answers

the train is electric. There is no smoke XD XD
North, because it will be trailing in th opposite direction

Can protons be gained or lost in an element?

Answers

No, they stay in the nucleus always, it is the electrons around the nucleus that can be gained or lost.
gained because they can be subtracted only with adding more elements

Which of the following is true about the solar system?
A.
Most of the planets have moons.
B.
Earth is the only planet that has a moon.
C.
None of the planets have moons.
D.
All of the planets have moons.

Answers

I believe that the answer is A! ☆
d.) all of the planets have at least one moon

compare and contrast potential and kinetic energy

Answers

Kinetic Energy is moving energy. And potential energy is air G that has the potential to be movie or not moving at all
Final answer:

Potential energy is stored energy due to an object's position or state, while kinetic energy is the energy of an object in motion. They differ in their state, with potential energy being at rest and kinetic energy being in action. However, both can be transformed into each other.

Explanation:

Potential energy and kinetic energy are both forms of mechanical energy, but they are different in many ways. Potential energy is stored energy that an object has due to its position or state, like a rock perched at the top of a hill has gravitational potential energy. It has the potential to convert into kinetic energy but for now, it remains at rest.

On the other hand, kinetic energy is the energy of motion. An object in motion has kinetic energy— for example, a moving car or a flowing river has kinetic energy. Unlike potential energy, it is already in action. So the key difference is that potential energy is stored, while kinetic energy is in motion.

However, they are similar in that they both can be transformed into each other. For instance, when that rock on the hill begins to roll downhill, its potential energy is converting into kinetic energy.

Learn more about Potential and Kinetic Energy

https://brainly.com/question/32442642

#SPJ6

The mixture use separated was a mixture of iron feelings sand and salt based on your understanding of matter is this mixture a homogenous or mixture or heterogenous mixture

Answers

This would be a heterogeneous mixture since the mixture could contain different proportions of sand, salt, and iron fillings. If the mixture was homogeneous, the mixture would be distributed evenly throughout and be considered a solution (i.e salt mixed with water, kool-aid powder and water).

Chalk is an ionic compound. Which is a property of all ionic compounds that makes chalk particularly useful for writing on a chalkboard?

Answers

The Properties that make chalk particularly useful for writing are hardness and brittleness.

Answer:

Hardness and brittleness

Explanation:

Ionic substances form crystal lattices which allow the compounds to be hard because of the strong attractions between positive and negative ions in the lattice. When pressure is applied to the compound like chalk , it may force ions of the same charge together ( i.e. positive to positive). This is called electrostatic repulsion which is able to break the crystal lattice allowing one to write on the chalkboard.

What is the result of (6.2 × 10 4) x (3.3 × 10 2) expressed in scientific notation?

Answers

Final answer:

The multiplication of (6.2 × 10^4) by (3.3 × 10^2) results in 2.046 × 10^7, when expressed in scientific notation.

Explanation:

The result of the multiplication (6.2 × 104) × (3.3 × 102), expressed in scientific notation, involves multiplying the coefficients (6.2 and 3.3) and then adding the exponents of 10 (4 and 2). It's important to recall that we must perform both steps to arrive at the correct answer in scientific notation.

The product of the coefficients is 20.46 and when we add the exponents the result is 106. So the multiplication gives us 20.46 × 106, but in correct scientific notation, we want the coefficient to be between 1 and 10. To achieve this we adjust the coefficient to 2.046 and increase the exponent by 1, giving us the result: 2.046 × 107.

_____ is the total kinetic energy of particles in an object.

Answers

Thermal energy (or thermal kinetic energy)  is the total kinetic energy of particles in an object

hope this helps

Which of the following forces is responsible for keeping the planets in orbit around the Sun?
A.
magnetism
B.
electromagnetic force
C.
gravity
D.
friction

Answers

C gravity. If it has mass, it has gravity.
According to my calculations it’s c gravity lol

Help please

Any unit of distance divided by any unit of time creates a unit of _____.

A. speed

B. velocity

C. position

D. acceleration

Answers

the answer should be speed hope this helps

The answer is A which is SPEED. This is because speed is gotten from the formula below;
Speed=distance/time.

Hope that helped. Have a nice day

which force causes an object to free fall
a) wind
b) fluid forces
c) friction
d) gravity

Answers

Answer is d) gravity

Hello Lunaerica62ovuaaf, Objects that are said to be undergoing free fall, are not encountering a significant force of air resistance; they are falling under the sole influence of gravity.So the answer is D) gravity.

the state of matter that can change shape but not volume is
a. gas
b. liquid
c. solid
d. plasma

Answers

the answer is b liquid
I believe the answer is B. Liquid

Hope this helps :)

What is the relationship between height and gpe

Answers

Final answer:

The relationship between height and gravitational potential energy is directly proportional, following the equation G.P.E. = mgh. GPE increases as the height of an object increases, and it is measured in Joules, reflecting the energy due to the object's position above a reference level.

Explanation:

The relationship between height (h) and gravitational potential energy (GPE) is directly proportional. This means, as an object is raised to a higher elevation above the ground, its GPE increases. The formula for calculating GPE is G.P.E. = mgh, where m represents the mass of the object in kilograms, g is the acceleration due to gravity (approximately 10 m/s² on Earth's surface), and h is the height in meters. The unit of GPE is Joules, which quantifies the energy associated with the object's position in the gravitational field.

In physics, only the change in GPE (ΔGPE) is of significance, which is measured as the difference in energy when an object's height changes relative to a reference level. For instance, if a 0.500-kg mass from a cuckoo clock is lifted by 1.00 m, its GPE changes by mgh. The concept of GPE is vital in various applications, including understanding how energy is conserved within systems influenced by gravitational forces.

your shopping cart has a mass of 65 kilograms. in order to accelerate the shopping cart down an aisle at 0.3 m/sec squared , what force would you need to use or apply to the cart

Answers

Assuming there is no friction between the floor and the shopping cart we can solve for the force by using F=m*a. 
With this F=65*(.3) which gives is the force to be 19.5N

PLEASE ANSWER VERY IMPORTANT

A good scientist keeps an open mind to every idea and explanation, even if they do not appear to be relevant to the outcome of the current experiment

Answers

Yes it is correct and true.

-Speed -Mass -Acceleration -Force


A (blank) is a push or pull between objects

Answers

Force is your answer.

The electrons that produce the picture in a
TV set are accelerated by a very large electric
force as they pass through a small region in
the neck of the picture tube. This region is
1.6 cm in length, and the electrons enter with
a speed of 1 × 10^5 m/s and leave with a speed
of 2.5 × 10^6 m/s.
What is their acceleration over this 1.6 cm
length?
Answer in units of m/s^2

.

Answers

Given:
u = 10⁵ m/s, the entrance velocity
v = 2.5 x 10⁶ m/s, the exit velocity
s = 1.6 cm = 0.016 m, distance traveled

Let a = the acceleration.
Then
u² + 2as = v²
(10⁵ m/s)² + 2*(a m/s²)*(0.016 m) = (2.5 x 10⁶ m/s)²
0.032a = 6.25 x 10¹² - 10¹⁰ = 6.24 x 10¹²
a = 1.95 x 10¹⁴ m/s²

Answer: 1.95 x 10¹⁴ m/s²

The fish shown above is the anglerfish. The stalk in front of its eyes is a flashing light that it uses to lure prey near its mouth. This is because the biome that it lives in is very dark. Where are anglerfish likely to be found?
A) an estuary
B) a freshwater lake
C) the abyssal zone of the ocean
D) the pelagic zone of the ocean

Answers

Anglers live at the bottom of the ocean so it'd be C.

The right option is; C) the abyssal zone of the ocean

The anglerfish are likely to be found in the abyssal zone of the ocean.  

The abyssal zone is the bottomless layer of the pelagic zone of the ocean that has the bathyal zone located on it.  The abyssal zone is at depths of 4,000 to 6,000 metres, and it remains permanently in darkness. This zone is a food limited environment because it lacks nutrients. The temperature of the zone is around 2 to 3 °C and has continuous cold.



A quarterback takes the football from the line of scrimmage and runs backward for 15 meters, he then runs sideways parallel to the line of scrimmage for 12 meters. At this point he throws the ball 50 meters perpendicular to the line of scrimmage where it is caught by the receiver. How far is the football from its original position?

Answers

A quarterback ... runs backward for 15 meters,

=> displacement vector = -15 j

he ... runs sideways parallel to the line of scrimmage for 12 meters.

=> displacement vector = 12 i

 he throws the ball 50 meters perpendicular to the line of scrimmage

=> displacement vector = 50j

where it is caught by the receiver.

=> net displacement = -15j + 12i + 50j = 12i + 35j

How far is the football from its original position?

distance ^2 = (12m)^2 + (35m)^2 = 1,369 m^2

=> distance = √ (1,369m^2) = 37 m^2

Answer: 37 m^2
65 meters from the original position

A star is born when gas and dust from a nebula become so dense and hot that nuclear fusion starts. Which of the following forces is responsible for the formation of a star?
A.
friction
B.
gravitation
C.
magnetism
D.
electromagnetic energy

Answers

Your Question:
A star is born when gas and dust from a nebula become so dense and hot that nuclear fusion starts. Which of the following forces is responsible for the formation of a star?
A.
friction
B.
gravitation
C.
magnetism
D.
electromagnetic energy
Our Teams Answer: B. Gravitation

Our Teams aim's to please and We are happy to help! Its the answer is wrong please notify us quickly for we can fix it quickly! Thanks :)

-ExperimentsDIY

Answer: B.  gravitation

Explanation:

Nebula is a stellar nursery. It is composed of dust and gases. This molecular cloud condenses under its own weight and forms a core which spins and gathers more mass due to gravity. This causes temperature and pressure to rise which kicks in the nuclear fusion reaction and a star is said to be born.

Thus, gravitation is responsible for formation of star.

How could a person easily tell which envelope contained four sheets of paper and which contained five sheets without opening the envelopes what assumption did you make in arriving at your answers

Answers

You can easily tell by shaking the envelope by making the sheets inside it overlap then flip it around then start feeling then you can feel 4 sheets
Final answer:

You could tell the difference between two envelopes containing 4 and 5 sheets of paper by comparing their weights. An envelope with 5 sheets should feel heavier than the one with 4 sheets, assuming that all materials involved are identical.

Explanation:

One way to tell the difference between two envelopes containing 4 and 5 sheets of paper without opening them would be to use weight as a distinguishing factor. Given that the weight of paper is constant, one sheet of paper would add a perceivable amount of weight to an envelope. Therefore, the envelope with 5 sheets should be heavier than the envelope containing 4 sheets. The assumption here is that both the envelopes and the sheets of paper are identical in every other aspect including size, material, weight, etc.

In theory, if you were to hold each envelope in either hand, the difference in weight should be detectable. It's a common practice in mailrooms where workers are adept at figuring out the number of papers inside envelopes just by weight comparison. This method, however, requires a certain level of sensitivity and practice. The real application of this method can vary based on multiple factors such as individual's sensitivity to weight change, uniformity in the weight of the paper etc.

Learn more about Weight Comparison here:

https://brainly.com/question/26483814

#SPJ12

predict which will fall to the ground faster a crumpled paper or flat sheet of paper

Answers

I think the crumpled paper because it has more weight
The crumpled piece of paper because it has more mass at this point and will have less air resistance since its not flattened out and has different edges for the wind/air to go through

a swimmer can swim in still water at a speed of 9.50 m/s. he intends to swim directly across the river that has a downstream current of 3.75 m/s. what is his velocity relative to the bank?

Answers

Refer to the diagram shown below.

Still-water speed  = 9.5 m/s
River speed = 3.75 m/s down stream.

The velocity of the swimmer relative to the bank is the vector sum of his still-water speed and the speed of the river.

The velocity relative to the bank is
V = √(9.5² + 3.75²) = 10.21 m/s

The downstream angle is
θ = tan⁻¹ 3.75/9.5 = 21.5°

Answer:  10.2 m/s at 21.5° downstream.

The relative velocity of swimmer to the bank is [tex]\boxed{10.21\text{ m/s}}[/tex] and [tex]\boxed{21.54^\circ}[/tex] downstream.

Further Explanation:

The swimmer swims across the river from one end to the other. The river is flowing downstream.

The swimmer will cross the river with some relative velocity.

Given:

The velocity of swimmer is [tex]9.50\text{ m/s}[/tex].

The velocity of river is [tex]3.75\text{ m/s}[/tex] downstream.

Concept:

Consider the direction of velocity of swimmer in positive x-direction.

The velocity of swimmer in vector form:

[tex]V_s=9.50\hat i[/tex]

Consider the direction of downstream current of river in negative y-direction.

The velocity of downstream current in vector form:

[tex]V_r=- 3.75\hat j[/tex]  

The relative velocity of swimmer to the bank is the resultant of two vectors in x and y direction.

Magnitude of relative velocity:

[tex]{V_{sr}}=\sqrt{V_r^2+V_s^2}[/tex]  

Substitute [tex]9.50\text{ m/s}[/tex] for [tex]V_s[/tex] and [tex]3.75\text{ m/s}[/tex] for [tex]V_r[/tex] in above equation.

[tex]\begin{aligned}{V_{sr}}&=\sqrt{3.75^2+9.50^2}\text{ m/s}\\&=10.21\text{ m/s}\end{aligned}[/tex]

The magnitude of relative velocity of swimmer is [tex]10.21\text{ m/s}[/tex] .  

The direction of relative velocity:

[tex]\theta={\tan^{-1}}\left({\dfrac{{{V_r}}}{{{V_s}}}}\right)[/tex]  

Substitute [tex]9.50\text{ m/s}[/tex] for [tex]V_s[/tex] and [tex]-3.75\text{ m/s}[/tex] for [tex]V_r[/tex] in above equation.

[tex]\begin{aligned}\theta&={\tan^{-1}}\left({\dfrac{{{-3.75}}}{{{9.50}}}}\right)\\&=21.54^\circ\end{aligned}[/tex]

The direction of relative velocity is [tex]21.54^\circ[/tex] downstream.

Thus, the relative velocity of swimmer to the bank is [tex]\boxed{10.21\text{ m/s}}[/tex] and [tex]\boxed{21.54^\circ}[/tex] downstream.

Learn more:

1. Volume of gas after expansion: https://brainly.com/question/9979757

2. Principle of conservation of momentum: https://brainly.com/question/9484203

3. Average translational kinetic energy: https://brainly.com/question/9078768

Answer Details:

Grade: Middle School

Subject: Physics

Chapter: Scalars and vectors

Keywords:

Swimmer, still, water, speed, 9.50 m/s, intends, directly, river, downstream, current, 3.75 m/s, velocity, relative, bank, vector, direction, 21.5degree and 10.21 m/s.

Which statements describe physical weathering? Select all that apply.

A. Two rocks hit against each other in a fast-flowing stream and break apart.
B. Oxygen and water change the compostion of the minerals in a rock
C. Small rocks are pushed together when a mole digs an underground den
D. Mosses grow on a rock and produce acids that wear away the rock over time.

Answers

Two rocks hit against each other in a fast-flowing stream and break apart. Mosses grow on a rock and produce acids that wear away the rock over time. These statements describe physical weathering. Therefore, option A and D are correct.

What is physical weathering ?

Physical weathering, often known as mechanical weathering, is the process that fractures rocks without altering their chemical makeup. The following instances show physical weathering: water moving quickly. For brief periods of time, swiftly rushing water has the ability to raise rocks out of the streambed.

Rocks break down into tiny fragments due to abrasive weathering processes like wind and water. Exfoliation weathering rocks shatter and expand as pressure from unloading is relieved. As water freezes and expands, frost-wedging rocks crack.

When a rock is subjected to physical processes like temperature changes or exposure to the effects of wind, rain, and waves, physical weathering takes place.

Thus, option A and D are correct.

To learn more about physical weathering, follow the link;

https://brainly.com/question/14426457

#SPJ3

Final answer:

Statements A and C describe physical weathering, which involves the purely physical breakdown of rocks, such as through collision in a stream or animal activity, without altering their chemical composition.

Explanation:

The question asks which statements describe physical weathering. Physical weathering, or mechanical weathering, involves the breakdown of rocks into smaller pieces without changing their chemical composition. Examples of physical weathering include the expansion and contraction of rocks due to temperature changes, the abrasive action of water or wind, and biological factors like plant roots breaking rocks apart.

A. Two rocks hit against each other in a fast-flowing stream and break apart.

C. Small rocks are pushed together when a mole digs an underground den.

Statement A is an example of physical weathering because it describes the physical action of rocks breaking apart due to collision in a stream. Statement C also illustrates physical weathering, showing how animal activity can physically move and potentially break rocks. In contrast, statements B and D describe chemical weathering, which involves the chemical alteration of rocks, such as mineral changes through oxidation or the action of acids.

Which statement describes what happens when Bret runs up a flight of stairs?

His kinetic energy increases.
His potential energy decreases.
His kinetic energy is converted into potential energy.
His potential energy is converted into kinetic energy.

Answers

Answer:

The answer is C) His kinetic energy is converted into potential energy.


Use the diagram to answer the question.

Number of Chirps per Minute
Cricket 15 ° C 20 ° C 25 ° C
1 91 135 180
2 80 124 169
3 89 130 176
4 78 125 158
5 77 121 157
Average 83 127 168

Which statement indicates a reasonable conclusion based on the data from this experiment?


Decreasing the number of chirps causes the temperature to drop.

Cricket chirping increases with an increase in temperature.

Decreasing the temperature increases the number of chirps.

Temperature can be increased by increasing the number of chirps.

Answers

Cricket chirping increases with an increase temperature.

the higher the temperature the higher the chirping

Answer: Cricket chirping increases with an increase in temperature.

Explanation:

The independent variable in the experiment is the variable which can be altered, manipulated and changed so as to determine it's influence over the dependent variable, which is the outcome of the experiment.

Here in the given experiment, the number of chirps is the dependent variable which is increasing due to the increase in the temperature which is the independent variable.

How is our planets giant,thermohaline system of warm and cold water like a massive convection current

Answers

The planets thermohaline system of warm and cold water is like a massive convection current in the way that it moves water around and seeks to circulate from hot to cold.

Why is it that auroral displays above Colorado can be forecast several days in advance?

Answers

Because we can observe sunspot activity, and because that activity sends radiation toward Earth, we can calculate when the radiation will hit our atmosphere and where the radiation will hit based on the earth's rotation. That radiation is what causes the auroral displays.

Suppose a car is traveling at +25.0 m/s, and the driver sees a traffic light turn red. After 0.340 s has elapsed (the reaction time), the driver applies the brakes, and the car decelerates at 7.00 m/s2.

Answers

First, we will get the distance traveled before the driver applied the brakes.
distance = velocity * time
distance = 25*0.34 = 8.5 m

Now, we will calculated the distance that the car traveled after the driver applied the brakes. To do this, we will use the equation of motion:
vf^2 = vi^2 + 2*a*d where:
vf = zero, vi = 25 m/s and a = -7 m/s^2
Note: The negative sign is only to show deceleration 
d =  1/2*(625) /(7) = 44.6428 m

The total stopping distance = 8.5 + 44.6428 = 53.1428 m

Which sphere forms Earth's outermost layer?

Atmosphere
Biosphere
Cryosphere
Hydrosphere

Answers

Answer:

The Atmosphere

Explanation:

Other Questions
Solve for x: one over eight(8x + 15) = 24 What are three main ways to improve a company's economies of scale? Determine the total number of roots of each polynomial function g(x) = 5x - 12x2 + 3 What part of speech is the word day in?Brian walked slowly home, as the day was so warm and pleasant.NounVerbAdverbAdjectiveWILL TIP $20 if correct Which graph represents the solution set of the system of inequalities? {3yx93x+y>3 how are ripples in the water commonly metaphorical A factor that most directly affects the demand for automobiles is jake rounded 18,752 to the nearest ten thousand which is his number Which photographic angle gives the impression of power or importance? Craig is writing a story about penguins. Explain to him in 1-2 sentences how adding adjectives to his writing would make his story better. What questions could you ask Craig about his writing to help him think of some interesting describing words? Include these in your answer. Clea attends music lessons every 2 weeks, dance class every 3 weeks, and has a dental appointment every 6 weeks. If she attends all three this week, when will she attend all three again Based on a sample survey, a company claims that 75% of their customers are satisfied with their products. Out of 1,176 customers, how many would you predi be satisfied? essay about what it means to be an american ? help!!!! Which accurately describes similarities between feudal Europe and Japan?(Select all that apply.)1. The warrior class in both Europe and Japan followed strict moral codes.2. The peasants in both Europe and Japan received goods instead of money for their work efforts.3.The warrior class in both Europe and Japan denounced religion in favor of war-like practices.4.The people of Europe and Japan were the first to use coinage instead of a barter system. In general, which trophic level has the LEAST energy available to it? A)producer B)primary consumer C)secondary consumer D)tertiary consumer Expressions that simplify to the same expression are called ____ 7,746.90 times x = 7,901.84 what's x PLZZZZZ HELP ME! :) XDDD One mile is 5280 feet. there are 3600 seconds in one hour. how many feet per second, rounded to the nearest hundredth, does a car travel when it is traveling at 60 miles per hours explain in approximately 100 words how the Declaration of Independence and the Declaration of Sentiments are alike. Steam Workshop Downloader