Use quantum numbers to represent the locations of electrons.

ANSWER THIS ASAP DON'T IGNORE LIKE THE OTHER 2 POST
Please?

Thank you, I really need this, Seriously if you know this then please be a good person and answer it.

There is a clear difference between a Person Who Knows it then a person who doesn't know it

Giving out 16 pts for this Question being Answer in the next Couple of Hours before its 4:15 P.M Tomorrow for My Oral Discussion with my Teacher.

ClF5 contains 42 electrons. Ten of them are bonded pair of electrons. Thirty are in lone pairs with F atoms. So accounting for 40 electrons. The remaining two electrons are left on Cl as a lone pair. So, the bond angles will be more or less equal to 90 degrees due to the extra repulsion from the delocalized lone pair. 

Final answer:

In ClF5, which exhibits a square pyramidal structure, the smallest bond angles are the Faxial-Cl-Fequatorial angles due to the lone pair on the chlorine atom, expected to be less than 90 degrees according to VSEPR theory.

Explanation:

The student's question pertains to the smallest bond angle in ClF5, assuming we are ignoring lone-pair effects. When considering the molecular geometry of ClF5, which has five bonding pairs and one lone pair of electrons, it is designated as AX5E based on VSEPR theory. The structure is square pyramidal, with a chlorine atom at the center, five fluorine atoms at the vertices, and one lone pair of electrons. Consequently, the Faxial-Cl-Fequatorial angles are typically smaller because of the presence of the lone pair on the chlorine atom, which causes the fluorine atoms in the axial positions to be slightly bent away from the lone pair.

In a perfect square pyramidal geometry (ignoring lone-pair effects), all the bond angles are 90 degrees. However, because lone pairs occupy more space than bonding pairs, when considering the lone pair, the Faxial-Cl-Fequatorial bond angles are expected to be less than 90 degrees. These would thus be the smallest bond angles in ClF5.

To calculate the mass of precipitate formed when highly concentrated Pb(ClO3)2 is mixed with 0.350 L of 0.170 M NaI, first determine the limiting reactant and use stoichiometry. Calculate the moles of Pb(ClO3)2 using its concentration and volume, then use the balanced equation to find the moles of PbI2 formed and finally calculate the mass of PbI2 using its molar mass.

To calculate the mass of precipitate formed when highly concentrated Pb(ClO3)2 is mixed with 0.350 L of 0.170 M NaI, we need to determine the limiting reactant and use stoichiometry.

First, calculate the moles of Pb(ClO3)2 using its concentration and volume.

Moles = concentration x volume = 0.170 M x 0.350 L = 0.0595 moles

The balanced equation for the reaction is:

Pb(ClO3)2 + 2NaI -> PbI2 + 2NaClO3

From the equation, we can see that 1 mole of Pb(ClO3)2 reacts with 1 mole of PbI2.

Therefore, the mass of PbI2 formed can be calculated using its molar mass and the moles of Pb(ClO3)2.

Mass of PbI2 = moles of Pb(ClO3)2 x molar mass of PbI2 = 0.0595 moles x 461.0 g/mol = 27.44 g

https://brainly.com/question/29762381

#SPJ11

Answer:

Option (D)

Explanation:

The relative scale is used to compare two objects or models, in terms of its scale. This enables to understand the relation between the scale of one model that is directly measurable and the other that is too large to measure. Here the direct measurable model is the globe-balloon system and the non-measurable large model is the earth-moon system.

According to the provided condition, Lewis knew that the earth's diameter is four times bigger than that of the moon. He constructed a model of its own by taking a globe of diameter 16 inches and a balloon of diameter 4 inches. He compares this globe to the earth and the balloon to the moon. His model completely satisfies the condition maintaining their relative sizes.  

So the property of relative scale of earth and the moon system is appropriately shown in this model.

Thus, the correct answer is option (D).

The periodic table is the arrangement of the elements in the periods and groups. They are not in order as they are arranged based on their atomic numbers.

The periodic table is the classification of the elements like alkali metals, alkaline, transitions metals, noble gases, metalloids, lanthanides etc. based on the increasing atomic numbers.

The atomic number of the elements is the number of protons present in the nucleus of the elemental atom. The atomic number defines the chemical and physical properties of the element.

Therefore, elements are not in the increasing order of the atomic mass as they are arranged based on the atomic number.

Learn more about the periodic table and atomic numbers here:

https://brainly.com/question/347109

Answer: 8.1 %

Explanation:

Molecular mass of [tex]C_{14}H_{19}NO_2[/tex]  =  235 g/mol

Atomic mass of hydrogen atom = 1 g/mol

Percentage of an element in a compound:

[tex]\frac{\text{Number of atoms of element}\times \text{Atomic mass of element}}{\text{molecular mass of element}}\times 100[/tex]

Mass Percentage of hydrogen:

[tex]\frac{19\times 1g/mol}{235 g/mol}\times 100=8.1\%[/tex]

The mass percent of hydrogen in [tex]C_{14}H_{19}NO_2[/tex] is 8.1%.

Answer:

The molar heat capacity of water 75.24 J/mol °C.

Explanation:

Specific heat is defined as amount of energy required to raise by the temperature of 1 g of substance by 1 degree Celsius.

Molar eat capacity as amount of energy required to raise by the temperature of 1 mole of substance by 1 degree Celsius.

Specific heat and molar heat capacities can be written:

Molar heat capacity = Specific heat × Molar mass of the substance

Specific heat of water = 4.18 J/g °C

Molar mass of water = 18 g/mol

Molar heat capacity of the water :

[tex] 4.18 J/g ^oC\times 18 g/mol= 75.24 J /mol^oC[/tex]

The molar heat capacity of water 75.24 J/mol °C.

The molar heat capacity of water that has a specific heat of 4.18 J/g°c is 75.24J/mol°C.

MOLAR HEAT CAPACITY:

Learn more at: https://brainly.com/question/2817451?referrer=searchResults

Final answer:

Atoms of the same element always have the same number of protons but can have different numbers of neutrons, which leads to the formation of isotopes. Lighter elements often have a neutron-to-proton ratio close to 1:1, while heavier elements tend to have higher ratios. The chemical properties are dictated by the number of protons and electrons, not by the number of neutrons.

Explanation:

In chemistry, the relationship between the number of protons, neutrons, and electrons defines the structure of an atom's nucleus and its place in the periodic table. All atoms of the same element have the same number of protons and electrons, which accounts for the element's chemical properties. However, the number of neutrons can vary even within atoms of the same element, leading to different isotopes. Isotopes have the same number of protons but differ in their number of neutrons, affecting their atomic mass but not their chemical properties.

The neutron-to-proton ratio increases as we look at heavier elements. The lightest element, hydrogen, can have zero, one, or two neutrons while maintaining its identity as hydrogen. For heavier elements, this ratio tends to increase, and it varies from one isotope to another. For instance, isotopes of carbon can have six, seven, or eight neutrons but always have six protons.

Stable isotopes tend to have a neutron-to-proton ratio close to 1:1 for lighter elements, increasing to 1.5:1 for heavier elements. Notably, all elements with atomic numbers greater than 83 are unstable and radioactive regardless of their number of neutrons. This peninsula of stability helps define the limits of stable existence for atomic nuclei in the sea of instability where radioactive decay occurs.

Answer:

The correct answer is the disposal procedure.

Explanation:

As we are considering the termination of an experiment, thus, the most essential information will be the disposal procedure. Not all the substances can be disposed of as the usual materials, many chemical components need to get properly disposed of as it can influence the animals, ambiance, and even human beings.  

MSDS or the Material Safety Data Sheet refers to a document, which comprises data on the potential hazards and how to handle them with caution, especially with the chemical product.  

From left to right in periodic table the atomic or ionic radius decreases. Thus, Mg is right to sodium and it is smaller than sodium.

Atomic radius is the distance from the nucleus to the valence shell containing electrons. The same can be defined for ionic radius. The elements in the periodic table are classified into different groups and periods.

Along a period the atomic radius increases and down a group the atomic or ionic radius increases. The atomic radius decreases because of the nuclear pulling to the electrons.

As the charge increases for a cation the smaller it will be. Mg2+ ions are formed by donation of two electrons from Mg and Na+ is formed by donation of one electron from it. Both are having 10 electrons.

However, the charge is higher for magnesium and it is smaller than sodium ion. Hence, ionic radius is smaller for magnesium ion.

To find more about ionic radius, refer the link below:

https://brainly.com/question/6637706

#SPJ5

Final answer:

The Mg²⁺ ion is expected to be smaller than the Na⁺ ion because it has a higher effective nuclear charge and a lower principal quantum number, which results in a tighter electron shell arrangement.

Explanation:

The Mg²⁺ and Na⁺ ions each have ten electrons. The size of an ion depends on both its nuclear charge and the electron shell arrangement. In this case, the Mg²⁺ ion is expected to be smaller than the Na⁺ ion. This is because the Mg²⁺ ion has a higher effective nuclear charge than the Na⁺ ion, which causes a greater electrostatic attraction between the electrons and the nucleus, thereby pulling the electron cloud closer and resulting in a smaller ionic radius. Furthermore, the principal quantum number for Mg²⁺ is n=2, while for Na⁺ it is n=3, indicating closer and more tightly held electron shells in Mg²⁺.

3.25 x 10^5 μg is not equal to 325 cg.

The element with a valence electron configuration of 4s2 4p3 is Phosphorus.

The element with a valence electron configuration of 4s24p3 is Phosphorus, with the atomic number 15. Its electron configuration is 1s22s22p63s23p3. In the last column of the p block, the valence shell electron configurations are 3p6 for silicon, 3p5 for phosphorus, 3p4 for sulfur, 3p3 for chlorine, and 3p2 for argon.

The set of values that represents standard pressure and standard temperature is (3) 101.3 kPa and 0 °C.

The standard state comprehends a set of conditions that are defined by convention.

At standard pressure and temperature (STP),  1 mole of an ideal gas occupies 22.4 L.

The set of values that represents standard pressure and standard temperature is (3) 101.3 kPa and 0 °C.

Learn more: https://brainly.com/question/6439270

Final answer:

Evaporation as a physical property and chemical properties explained with examples and distinctions.

Explanation:

Evaporation is a physical property as it is a characteristic of a substance that can be observed or measured without changing the substance's identity. For molecules to evaporate, they must be located near the surface, moving in the right direction, and have sufficient kinetic energy to overcome intermolecular forces, which relates to physical properties.

Chemical properties, on the other hand, describe how matter changes its chemical structure or composition. An example is flammability - a material's ability to burn, which results in a chemical change, highlighting the distinction between physical and chemical properties.

In summary, physical properties are observable characteristics like color and boiling points, while chemical properties relate to changes in chemical structure and composition, such as the ability to undergo a chemical reaction or change.

The element with electron configuration 2-8-18-1 is potassium (K), which is in the first column of the s-block of the periodic table and has an atomic number of 19.

An element whose atoms have the electron configuration 2-8-18-1 is likely a member of the alkali metals which reside in the first column of the s-block. The mentioned configuration suggests that this element has 29 electrons. Referring to the periodic table and electron configurations chart, we can determine that the element with this configuration is potassium (K), which has an atomic number of 19. Potassium typically has the electron configuration of 1s² 2s² 2p¶ 3s² 3p¶ 4s¹, which is the same as having the configuration 2-8-8-1 when considering each shell's capacity without specifying subshell orbitals.

Accurate data refers to measurements close to the true value, while precise data refers to measurements that yield similar results when repeated.

Accuracy and precision are both important concepts in scientific measurements. Accurate data refers to measurements that are close to the true or accepted value, while precise data refers to measurements that yield similar results when repeated. For example, if you weigh an object on a scale multiple times and get the same or very similar results, your measurements are precise. If your measurements are also close to the actual weight of the object, they are accurate.

https://brainly.com/question/38783667

#SPJ11

Hydrochloric acid has a chemical formula of HCl. Now when this is mixed with water to form an aqueous solution, HCl dissociates into its component ions:

HCl  -->  H+  +  Cl-

HCl completely dissociates into H+ and Cl- because it is a strong acid. The species that is responsible for this acidic nature is H+ ion.

Answer:

H+

Lipids are mostly made up of carbon, hydrogen, and oxygen. Some lipids may also contain phosphorus and nitrogen but to a lesser degree. A prime example is a triglyceride, a common fat or oil, composed of glycerol and fatty acids, both of which contain carbon, hydrogen, and a small amount of oxygen.

Lipids are a group of naturally occurring molecules that include fats, waxes, sterols, fat-soluble vitamins, monoglycerides, diglycerides, triglycerides, and others. The main types of atoms that make up lipids are carbon (C), hydrogen (H), and oxygen (O). However, they contain less oxygen compared to carbohydrates. Some lipids also might include other elements such as phosphorus (P) and nitrogen (N) but to a lesser extent.

To give you a general example, a triglyceride, which is a typical fat or oil, is made from one molecule of glycerol (which contains carbon, hydrogen, and oxygen) and three fatty acids (which are chains of carbon and hydrogen, also containing a small amount of oxygen).

https://brainly.com/question/32844147

#SPJ6