Two garden plots are to have the same area. One is square and one is rectangular. The rectangular plot is 2 meters wide and 18 meters long. How long is one side of the of the square garden plot in meters?

By solving the given equations using the provided information, and assuming the constant c = 4/3, we can find the coordinates of the point P on the curve corresponding to t = 2 are (8/3, 32/9). There is a probable discrepancy in the question which causes two different solutions for c, therefore making the canonical form of the parabola ambiguous.

The given parametric curve has its equations as x = ct and y = c/8 * t^2. We're given that it's the arc of the parabola 8y = x^2 from (0, 0) to (4, 2), meaning that we can set x = ct = 4 and y = c/8 * t^2 = 2 when t=3 (the upper limit of t) to find the value of the constant c. Solving these equations gives c=4/3 and c=48. Since c must be the same in both equations, there seems to be a discrepancy here, which could possibly originate from a mistake in the question. However, if we only use c from the first equation (x = ct), we get c = 4/3.

The question asks for the coordinates of the point on the curve corresponding to t = 2. Substituting t = 2 into x = ct and y = c/8 * t^2 gives x = 8/3 and y = 32/9, assuming c = 4/3. So, the coordinates of the point would be (8/3, 32/9).

https://brainly.com/question/37795536

#SPJ11

Answer:

The temperature is -12.5 degrees Celsius.

Step-by-step explanation:

The daily maximum temperature, or high, describes how warm you can expect the air to be, usually from 7 a.m. to 7 p.m. The daily minimum temperature, or low, tells how much the air is expected to cool, usually overnight from 7 p.m. to 7 a.m.

Final answer:

The tens digit of a perfect square with a units digit of 6 could be any digit from 0 to 9. This is because when numbers ending in either 4 or 6 are squared, the tens digit can take any value in the range of 0-9 due to the cyclic nature of the squares.

Explanation:

The units digit of a perfect square can be 6, and this occurs when a number ending in either 4 or 6 is squared since 42 is 16 and 62 is 36. Considering this, the possible values for the tens digit of a perfect square with a units digit of 6 could be derived from these squares. For the tens digit, we must look at the squares of numbers ending in 4 or 6 and check the ten's place of the resulting product.

For example, if we consider 142 (which is 196) and 162 (which is 256), the tens digit can be either 9 or 5. Continuing with this pattern for numbers ending in 4 or 6 all the way to 942 and 962, we find that the tens digit is cyclic and can be 0, 1, 2, 3, 4, 5, 6, 7, 8, or 9. Therefore, all ten digits are possible for the tens place of a number whose square ends in 6.

Answer: 200 ft per hour

Step-by-step explanation:

Given : You are hiking on a trail that leads to the top of a mountain.

At 12 P.M. you reach an elevation of 3700 feet. At 4 P.M. you reach an elevation of 4500 feet.

The formula for the mean hourly change in elevation is :-

[tex]\dfrac{\text{Change in elevation}}{\text{Time in hours}}[/tex]

From the given information, the change in elevation=4500 ft-3700 ft= 800 ft

Time taken = 4 hours   [From 12 pm to 4 pm]

Now, Mean hourly change in elevation=[tex]\dfrac{800}{4}=200[/tex]

Hence, the mean hourly change in elevation = 200 ft

The percentage of students who passed the class with a C or better is 82.1%. This is found by adding the number of students who earned A, B, or C grades, dividing by the total number of students, and multiplying by 100.

The subject is Mathematics, specifically a problem in percentages. First, we need to find the total number of students in the class. We add the number of students that earned each grade: 5 (A) + 8 (B) + 10 (C) + 3 (D) + 2 (F) = 28 students in total.  

Next, we need to identify the number of students who passed the class with a C or better. This includes the students who earned an A, B, or C. Adding these numbers together gets us 5 (A) + 8 (B) + 10 (C) = 23 students.  

Then, to find the percentage of students who passed the class, we divide the number of students who passed (23) by the total number of students (28) and then multiply by 100 to convert the result to a percentage. So the calculation is as follows: (23/28)*100 = 82.14. Rounded to one decimal place, that is 82.1%. Therefore, 82.1% of students passed the class with a grade of C or better.

https://brainly.com/question/32197511

#SPJ2

The percent of students who passed the course with a C or better is: 82.14%

To find the percent of students who passed the course with a C or better, we need to divide the number of students who passed by the total number of students and multiply by 100%.

The number of students who passed is 5 + 8 + 10 = 23.

The total number of students is 5 + 8 + 10 + 3 + 2 = 28.

Therefore, the percent of students who passed the course with a C or better is:

(23 / 28) * 100% = 82.14%

Rounding to one decimal place, the answer is 82.1%.

For such more question on percent

https://brainly.com/question/26511030

#SPJ2

Answer:

A quadratic equation is in the form of [tex]ax^2+bx+c =0[/tex]........[1], then the solution for this equation is given by:

[tex]x = \frac{-b \pm \sqrt{b^2-4ac}}{2a}[/tex]

As per the statement:

The equation is given by:

[tex]h=-16t^2+25t+8[/tex]

where, h is the height in feet t seconds after it is thrown.

After the ball passes its maximum height, it comes down and then goes into the hoop at a height of 10 feet above the ground.

⇒h = 10 feet

then;

[tex]-16t^2+25t+8=10[/tex]

Subtract 10 from both sides we have;

[tex]16t^2-25t+2=0[/tex]

On comparing this equation with [1] we have;

a =16 , b =-25 and c =2

then;

[tex]t= \frac{25 \pm \sqrt{(-25)^2-4(16)(2)}}{2(16)}[/tex]

⇒[tex]t= \frac{25 \pm \sqrt{625-128}}{32}[/tex]

⇒[tex]t= \frac{25 \pm \sqrt{497}}{32}[/tex]

as we want the time when it was falling so ,

[tex]t= \frac{25 + \sqrt{497}}{32}[/tex]

Simplify:

[tex]t \approx 1.48[/tex] sec

Therefore, 1.48 sec long after it was thrown does it go into the hoop

A player will need 2,264 points on the hardest setting of level 4 as calculated by evaluating g(4) using the function g(x) = 7(3)^x - 1 and then applying the function h(x) = 4x.

To calculate the number of points a player will need on the hardest setting of level 4, we need to consider the function h(x) = 4x provided in the context of the question. However, the question also mentions the function g(x) = 7(3)^x - 1, which indicates the points needed to reach the next level normally. Since we need to find the hardest setting value, we will use the function h(x) but before that, we need to evaluate g(4) to find out the base points at level 4.

To find g(4), we substitute x = 4 into g(x):

g(4) = 7(3)^4 - 1 = 7(81) - 1 = 567 - 1 = 566

Now we apply the function h(x) to this value to get the points on the hardest setting:

h(g(4)) = 4 × 566 = 2264

Therefore, a player will need 2,264 points on the hardest setting of level 4.

All the angles of the quadrilateral are,

⇒ ∠A = Right angle

⇒ ∠B = Obtuse angle

⇒ ∠C = Acute angle

⇒ ∠D = Right angle

An angle is a combination of two rays (half-lines) with a common endpoint. The latter is known as the vertex of the angle and the rays as the sides, sometimes as the legs and sometimes the arms of the angle.

Now, We know that;

Any angle which is greater than 90° is called obtuse angle and less than 90° is called acute angle and 90° is called Right angle.

Here, The four angles of the quadrilateral are,

⇒ ∠A = 90°

⇒ ∠B = 105°

⇒ ∠C = 75°

⇒ ∠D = 90°

Hence, We get;

⇒ ∠A = Right angle

⇒ ∠B = Obtuse angle

⇒ ∠C = Acute angle

⇒ ∠D = Right angle

Learn more about the angle visit:;

https://brainly.com/question/25716982

#SPJ2

The zero with a multiplicity of 1 is x = 1, and the zero x = -2 has a multiplicity of 2.

For a general polynomial like:

[tex]p(x) = (x - x_1)^n*(x - x_2)^m*...[/tex]

The zero x₁ has a multiplicity of n (same as the exponent in the term where the zero appears), while the zero x₂ has a multiplicity m.

Now let's go to our polynomial:

[tex]f(x) = (x - 3)^2(x + 2)^2(x - 1)[/tex]

Here we can see that the only zero with a multiplicity of 1, is x = 1, while the zero x = -2 has a multiplicity of 2.

If you want to learn more about polynomials, you can read:

https://brainly.com/question/4142886

Answer:

first one is 1 and second is 2

Step-by-step explanation:

just got it right