Answer:
50 mL of 12M HCl should be added into 100 mL of water to produce a 4M solution.
Explanation:
According to law of dilution-
[tex]C_{1}V_{1}=C_{2}V_{2}[/tex]
where [tex]C_{1},C_{2},V_{1}[/tex] and [tex]V_{2}[/tex] are initial concentration, final concentration, initial volume and final volume respectively.
Here, [tex]C_{1}=12M[/tex] , [tex]C_{2}=4M[/tex] , [tex]V_{1}=50mL[/tex]
So, [tex]V_{2}=\frac{C_{1}V_{1}}{C_{2}}[/tex] = [tex]\frac{(12M)\times (50mL)}{(4M)}[/tex] = 150 mL
Hence, final volume of HCl solution should be 150 mL.
So, volume of water needed = (150-50) mL = 100 mL
Therefore 50 mL of 12M HCl should be added into 100 mL of water to produce a 4M solution.
You need to add [tex]\( {150} \)[/tex] mL of water to 50 mL of 12 M hydrochloric acid to produce a 4 M solution.
To determine how much water should be added to 50 mL of 12 M hydrochloric acid (HCl) to produce a 4 M solution, we can use the dilution formula which states:
[tex]\[ C_1V_1 = C_2V_2 \][/tex]
where:
- [tex]\( C_1 \)[/tex] and [tex]\( V_1 \)[/tex] are the concentration and volume of the initial solution (12 M and 50 mL, respectively),
- [tex]\( C_2 \)[/tex] and [tex]\( V_2 \)[/tex] are the concentration and volume of the final solution (4 M and the unknown volume of water, respectively).
Let's solve for [tex]\( V_2 \)[/tex]:
[tex]\[ C_1V_1 = C_2V_2 \][/tex]
Substitute the given values:
[tex]\[ 12 \times 50 = 4 \times V_2 \][/tex]
Solve for [tex]\( V_2 \)[/tex]:
[tex]\[ 600 = 4 \times V_2 \][/tex]
[tex]\[ V_2 = \frac{600}{4} \][/tex]
[tex]\[ V_2 = 150 \text{ mL} \][/tex]
Show the mechanism for the following reaction: cyclohexene bromine yields a dibromocyclohexane Unlike previous problem, this problem does require illustration of stereochemistry. Draw wedge-and-dash bond stereochemical structures – including H atoms on ALL chirality center (product and intermeidate both)– and include charges, electrons, and curved arrows. Details count. Draw one enantiomer only for any racemates. NOTE: A bromonium ion bromine should have TWO lone pairs, not three.
Answer:
Check the explanation
Explanation:
Kindly check the attached image below for the step by step explanation to the question above.
Urea (CH4N2O) is a common fertilizer that can be synthesized by the reaction of ammonia (NH3) with carbon dioxide as follows: 2NH3(aq)+CO2(aq)→CH4N2O(aq)+H2O(l) In an industrial synthesis of urea, a chemist combines 142.1 kg of ammonia with 211.4 kg of carbon dioxide and obtains 171.4 kg of urea. Part A Determine the limiting reactant. Express your answer as a chemical formula.
Answer:
The limiting reactant is Carbon dioxide, [tex]CO_{2}[/tex]
Explanation:
The balanced reaction equation is:
[tex]2NH_{3} + CO_{2}[/tex] → [tex]CH_{4} N_{2} O + H_{2} O[/tex]
The mole ratio of ammonia to carbon dioxide is 2:1
142100/17g = 8358.8 mol of NH3
211400/44g = 4, 804.5 mole of CO2
Now:
4,804.5 mol of CO2 × [tex]\frac{2 mol NH_{3} }{1 molCO_{2} }[/tex] = 9,609 mol of NH3 present
8,358.8 mole of NH3 × [tex]\frac{1 moleCO_{2} }{2moles NH_{3} }[/tex] = 4,179.4 mol of CO2 present
NH3 needs 8, 358.8 moles but had 9, 609 moles⇒ excess reactant
CO2 needs 4, 804,5 mol but had 4, 179.4 moles⇒ limiting reactant (used up completely)
The limiting reactant is carbon dioxide, CO2.
Ammonia is the limiting reactant in the synthesis of urea from ammonia and carbon dioxide.
Explanation:The reaction between ammonia (NH3) and carbon dioxide (CO2) produces urea (CH4N2O) and water (H2O) according to the balanced equation: 2NH3(aq) + CO2(aq) → CH4N2O(aq) + H2O(l).
To determine the limiting reactant, we need to compare the amount of each reactant used to the amount of urea produced. From the given information, 142.1 kg of ammonia and 211.4 kg of carbon dioxide react to produce 171.4 kg of urea.
We can use the stoichiometry of the balanced equation to find the theoretical yield of urea from both reactants:
For ammonia: 1 mole of urea is produced from 2 moles of ammonia. The molar mass of ammonia is 17.03 g/mol, so the number of moles of ammonia in 142.1 kg is (142.1 kg) / (17.03 g/mol) = 8358.4 mol. Therefore, the theoretical yield of urea from ammonia is (8358.4 mol) / 2 = 4179.2 mol or 4179.2 mol × 60.06 g/mol = 250783.4 g.For carbon dioxide: 1 mole of urea is produced from 1 mole of carbon dioxide. The molar mass of carbon dioxide is 44.01 g/mol, so the number of moles of carbon dioxide in 211.4 kg is (211.4 kg) / (44.01 g/mol) = 4801.6 mol. Therefore, the theoretical yield of urea from carbon dioxide is 4801.6 mol × 60.06 g/mol = 288255.4 g.Since the actual yield of urea is 171.4 kg, which is less than both the theoretical yields from ammonia and carbon dioxide, the limiting reactant is ammonia (NH3).
Therefore, the limiting reactant is ammonia (NH3).
What kind of reaction does luminol go through?
Answer: This reaction is called as Chemiluminescence. A type of reaction in which light is produced due to chemical reaction. While in case of Phosphorescence and Fluorescence light is emitted due to absorption of photons.
Explanation: i looked the answer up but your welcomee ❤
Final answer:
Luminol undergoes a chemiluminescent reaction that produces light when it reacts with hydrogen peroxide and a catalyst, often used in forensic science to detect blood.
Explanation:
Luminol goes through a chemiluminescent reaction, which refers to a process where a chemical reaction produces a molecule in an excited state. In the presence of hydrogen peroxide and a catalyst, such as the iron found in hemoglobin, luminol reacts to generate 3-aminophthalate in an excited state, emitting a bluish light. This reaction is highly valuable in forensic science for the detection of blood.
Chemiluminescence is a phenomenon where the energy from a chemical reaction is released as light. This reaction is possible because certain chemicals, like peroxide and ozone used in chemiluminescent reactions, contain unstable or energetic chemical bonds. The process is a rare occurrence in chemical reactions and is a direct transduction of chemical energy into radiant energy.
Need help setting the problem up
Answer:
4.0 moles
Explanation:
The following data were obtained from the question:
Volume (V) = 12L
Pressure = 5.6 atm
Temperature (T) = 205K
Gas constant (R) = 0.08206 atm.L/Kmol
Number of mole (n) =?
Using the ideal gas equation: PV = nRT, the number of mole of the gas can be obtained as follow
PV = nRT
5.6 x 12 = n x 0.08206 x 205
Divide both side by 0.08206 x 205
n = (5.6 x 12)/(0.08206 x 205)
n = 4.0 moles
Therefore, the number of mole of the gas is 4.0 moles
A solution of calcium chlorate was poured into a sodium fluoride solution. Would you expect a precipitate to form if 255.0 mL of the calcium chlorate solution (2.0x10-5 M) was mixed with 300.0 mL of a 2.5x10-3 M sodium fluoride solution? A. No, because Qsp < Ksp for calcium fluoride B. Yes, because Qsp < Ksp for calcium fluoride C. Yes, because Qsp = Ksp for sodium chlorate D. Yes, because Qsp = Ksp for calcium fluoride E. No, because Qsp = Ksp for sodium chlorate F. No, because Qsp < Ksp for sodium chlorate G. No, because Qsp > Ksp for calcium fluoride H. No, because Qsp > Ksp for sodium chlorate I. Yes, because Qsp < Ksp for sodium chlorate J. No, because Qsp = Ksp for calcium fluoride K. Yes, because Qsp > Ksp for sodium chlorate L. Yes, because Qsp > Ksp for calcium fluoride
Answer:
A) No , because Qsp<Ksp for calcium fluoride.
Check attachment for calculation
Without specific calculations, to determine if a precipitate forms when mixing calcium chlorate with sodium fluoride, one assesses if the product of the ion concentrations exceeds the Ksp for calcium fluoride; if Qsp > Ksp, precipitation occurs.
Explanation:To determine if a precipitate will form when calcium chlorate is mixed with sodium fluoride, one must consider the ionic products formed and compare the reaction quotient (Qsp) with the solubility product constant (Ksp) of the relevant compound, in this case, calcium fluoride (CaF2). The Ksp for calcium fluoride is 3.45 × 10∑11. In a mixture of calcium chlorate and sodium fluoride, the calcium ions (Ca2+) from calcium chlorate can react with the fluoride ions (F∑) from sodium fluoride to potentially form solid calcium fluoride. However, without the exact concentrations of Ca2+ and F∑ after mixing, one cannot directly calculate Qsp. The principle, however, is that if Qsp > Ksp, a precipitate of calcium fluoride will form, whereas if Qsp < Ksp, no precipitate forms because the solution is not supersaturated with respect to CaF2.
The concentration of each ion in the final solution depends on the dilution that occurs when the two solutions are mixed. Given the initial conditions and the principle that the formation of a precipitate requires Qsp to exceed Ksp, we generally assess the likelihood of precipitation by considering the concentrations of the reactive ions and the solubility product of the insoluble compound they may form. In this scenario, without performing a specific calculation, the correct answer would be based on understanding whether the mixing leads to a situation where the product of the concentrations of calcium and fluoride ions exceeds the Ksp of calcium fluoride.
What is the molarity (concentration) of 2.53 L of NaOH which exactly neutralizes 5.0L of 1.25 M HCl?
Answer:
The concentration of NaOH is 2.47 M
Explanation:
The equation of the reaction is
HCl (aq) + NaOH(aq) ------> NaCl(aq) + H2O(l)
Given;
Concentration of acid CA= 1.25 M
Volume of acid VA= 5.0L
Concentration of base CB= ????
Volume of base VB= 2.53 L
Number of moles of acid NA= 1
Number of moles of base NB= 1
From;
CAVA/CBVB= NA/NB
CAVANB= CBVBNA
CB= CAVANB/VBNA
CB= 1.25 × 5.0 ×1 / 2.53×1
CB= 2.47 M
Therefore the concentration of NaOH is 2.47 M
The addition of 5.0x10–3 total moles of Zn2+ to a 1.0 L solution of NaCN gives a solution of the complex ion [Zn(CN)4] 2– (Kf = 4.17x1019). What is the equilibrium concentration of uncomplexed Zn2+ ions if the concentration of cyanide ions at equilibrium is 0.50 M?
Answer:
Concentration of [tex]Zn^{+2}[/tex] = 1.9 * [tex]10^{-19}[/tex]
Explanation:
Find the provided attachment for solution.
The equilibrium concentration of uncomplexed Zn²⁺ ions if the concentration of cyanide ions at equilibrium is 0.50 M, is 19.18 × 10⁻²² M.
How do we calculate the equilibrium constant?Equilibrium constant of any reaction will be calculated as the ration of the concentration of products to the concentration of reactants with raise to to respective coefficients at the equilibrium condition.
Moles of Zn²⁺ & Zinc cyanide complex are equal, so the concentration of 5×10⁻³ moles of Zinc cyanide complex in 1 liter of the solution is 5×10⁻³ M.
Chemical reaction for the formation of given complex with ICE table is:
Zn²⁺ + 4(cyanide ions) ⇄ Zinc cyanide complex
Initial: 0 0.50 5×10⁻³
Change: +x +4x -x
Equilibrium: x 0.50+4x 5×10⁻³-x
Equilibrium constant for the above reaction will be calculated as:
Kf = Zinc cyanide complex / [Zn²⁺][cyanide ion]⁴
Given value of Kf = 4.17 × 10¹⁹
On putting all values on the above equation we get,
4.17 × 10¹⁹ = [5×10⁻³-x] / [x].[0.50+4x]⁴
x is very small as compared to the 5×10⁻³ and 0.50, so we can neglect x and equation becomes:
4.17 × 10¹⁹ = [5×10⁻³] / [x].[0.50]⁴
x = 19.18 × 10⁻²² M
Hence, required concentration of Zn²⁺ is 19.18 × 10⁻²² M.
To know more about equilibrium concentration, visit the below link:
https://brainly.com/question/19340344
At a certain temperature the vapor pressure of pure acetyl bromide is measured to be . Suppose a solution is prepared by mixing of acetyl bromide and of chloroform . Calculate the partial pressure of acetyl bromide vapor above this solution. Round your answer to significant digits. Note for advanced students: you may assume the solution is ideal.
Answer:
0.22 atm.
Explanation:
Acetyl bromide is a Chemical compound with molar mass of 122.95 g/mol and chemical formula of C2H3BrO. Acetyl bromide has a density of 1.66 g/cm³ and it is often classified as a volatile organic compound.
Chloroform is a Chemical compound with molar mass of 119.38 g/mol and chemical formula of CHCl₃.
So, let us delve right into the Calculations of the question above;
The number of moles of Acetyl bromide, C2H3BrO = mass/molar mass = 51.8/ 122.95 = 0.421 moles.
The number of moles of Chloroform, CHCl₃ = mass/ molar mass = 123/119.38 = 1.03 moles.
Total moles = 1.03 moles + 0.421 moles= 1.4513 moles.
Mole fraction of Acetyl bromide= 0.421 moles/1.4513 moles = 0.2901
Partial Pressure = 0.2901 × 0.75= 0.2176 atm.
= 0.22 atm.
Final answer:
To calculate the partial pressure of acetyl bromide in a solution, Raoult's Law is applied, but specific values are necessary for an exact calculation. Without these values, a general explanation of the methodology is provided.
Explanation:
To calculate the partial pressure of acetyl bromide in a solution with chloroform, we use Raoult's Law, which states the partial vapor pressure of a component in a mixture is equal to the vapor pressure of the pure component multiplied by its mole fraction in the mixture. The equation for Raoult's Law is Pi = Xi * P0i, where Pi is the partial pressure of the component i, Xi is the mole fraction of the component i in the liquid phase, and P0i is the vapor pressure of the pure component i. However, the question does not provide specific values for the initial vapor pressure of acetyl bromide or the quantities of acetyl bromide and chloroform, making it impossible to calculate the exact partial pressure without these inputs. Typically, you would calculate the mole fraction of acetyl bromide by dividing the moles of acetyl bromide by the total moles of solution and then use Raoult's Law to find the partial pressure of acetyl bromide vapor.
calculate mass of sulfur that must be burned to give 8g of sulfur dioxide
In a chemical reaction between sulfur and oxygen that produces sulfur dioxide, there is a 1:1 ratio between sulfur and sulfur dioxide. Using the molar mass of sulfur and sulfur dioxide, it is calculated that to produce 8g of sulfur dioxide, 4g of sulfur needs to be burned.
Explanation:
To calculate the mass of sulfur that must be burned to give 8g of sulfur dioxide, we first need to understand mole ratio and molar mass, since the question is about a chemical reaction described by a balanced chemical equation. The balanced equation is: S + O2 --> SO2.
The molar masses are: S (32.06 g/mol), O2 (32 g/mol, because there are 2 O atoms each 16 g/mol), and SO2 (64.06 g/mol, which sum the molar masses of S and O2).
From the balanced chemical equation, we see a 1:1 ratio exists between sulfur and sulfur dioxide. So, the number of moles in 8g of SO2 would be the mass divided by the molar mass: 8g SO2 * (1 mol SO2/64.06 g SO2) = 0.125 mol SO2.
Because of the 1:1 ratio between sulfur and sulfur dioxide, 0.125 mole of sulfur is needed. Convert this to grams, we have: 0.125 mol S * (32.06 g S/1 mol S) = 4 g of sulfur
Learn more about Stoichiometry here:https://brainly.com/question/30218216
#SPJ2
BALANCE the equation
2.How many moles of chlorine gas can be produced if 4 moles of FeCl3 react with 4 moles of O2?
Answer:
1. 4FeCl3 + 3O2 → 2Fe2O3 + 6Cl2
2. 6 moles of Cl2
Explanation:
1. The balanced equation for the reaction. This is illustrated below:
4FeCl3 + 3O2 → 2Fe2O3 + 6Cl2
2. Determination of the number of mole of Cl2 produce when 4 moles of FeCl3 react with 4 moles. To obtain the number of mole of Cl2 produced, we must determine which reactant is the limiting reactant.
This is illustrated below:
From the balanced equation above,
4 moles of FeCl3 reacted with 3 moles of O2.
Since lesser amount of O2 (i.e 3 moles) than what was given (i.e 4 moles) is needed to react completely with 4 moles of FeCl3, therefore FeCl3 is the limiting reactant and O2 is the excess reactant.
Finally, we can obtain the number of mole Cl2 produced from the reaction as follow:
Note: the limiting reactant is used as it will produce the maximum yield of the reaction since all of it is used up in the reaction.
From the balanced equation above,
4 moles of FeCl3 will react to produced 6 moles of Cl2.
Which choice represents a pair of resonance structures? Note that lone pairs have been omitted for clarity. View Available Hint(s) Which choice represents a pair of resonance structures? Note that lone pairs have been omitted for clarity.
a. N≡C−N≡C− and N≡C−HN≡C−H
b. O=N−FO=N−F and N=O−FN=O−F
c. O−N=OO−N=O and O=N−OO=N−O
d. O=OO=O and F−FF−F
Option b (O=N−F and N=O−F) represents a pair of resonance structures.
Explanation:The correct choice representing a pair of resonance structures is option b. O=N−F and N=O−F.
Resonance structures are different representations of a molecule or ion that show the delocalization of electrons. In option b, the double bond can be moved between the nitrogen and oxygen atoms, resulting in two resonance structures.
Resonance occurs when there are multiple valid Lewis structures that can be drawn for a molecule or ion. It indicates that the actual structure is a combination or hybrid of all the resonance structures.
Learn more about Resonance structures here:https://brainly.com/question/35369195
#SPJ6
Absorption of 1.0 rad of which of the following types of radiation will result in the greatest tissue damage?
○ alpha
○ beta
○ gamma
○ They all result in the same amount of damage.
Absorption of 1.0 rad of gamma radiation would likely cause the greatest tissue damage due to its high energy and penetration ability.
The amount of tissue damage caused by radiation depends on various factors, including the type of radiation and its energy level.
Alpha particles are relatively heavy and highly ionizing, but they have low penetration power, so they are generally less damaging to tissues externally but can be more damaging if ingested or inhaled.
Beta particles have less mass and energy compared to alpha particles and can penetrate deeper into tissues, potentially causing more damage.
Gamma rays are electromagnetic radiation with high energy and penetration power. They can penetrate deeply into tissues, causing damage along their path.
Considering these factors, absorption of 1.0 rad of gamma radiation would likely result in the greatest tissue damage due to its high energy and penetration ability.
The frequency table will be used to make a histogram. Use the drop-down menus to answer each question regarding the histogram.
What will the horizontal axis represent?
What will the vertical axis represent?
What is an appropriate scale?
Which interval should be used?
Answer:
What will the horizontal axis represent?
Temperature
What will the vertical axis represent?
number of days
What is an appropriate scale?
0-100
Which interval should be used
20
Answer:
✔ temperature
✔ number of days
✔ 0–100
✔ 20
Explanation:
An aluminum calorimeter with a mass of 100 g con- tains 250 g of water. The calorimeter and water are in thermal equilibrium at 10.0°C. Two metallic blocks are placed into the water. One is a 50.0-g piece of copper at 80.0°C. The other has a mass of 70.0 g and is originally at a temperature of 100°C. The entire system stabilizes at a final temperature of 20.0°C. (a) Determine the spe- cific heat of the unknown sample.
Answer:1.587J / g degC.
Explanation:SOLUTION
Specific heat of aluminum = 0.897 J / g degC.
Heat gained by calorimeter = 100 * 10 * 0.897 J = 897 J
Specific heat of water = 4.18 J / g degC.
Heat gained by water = 250 * 10 * 4.18 J = 10450 J
Specific heat of copper = 0.385 J / g degC.
Heat loss by copper block = 50 * (80-10) * 0.385 J =1347.5 J
Let specific heat of unknown block be x J / g degC.
Heat loss by unknown block = 70 * (100-10) * x J = 6300x J
Heat gain = Heat loss
897 + 10450 = 1347.5 + 6300x
6300x = 9999.5
x =1.58722= 1.587
Specific heat of unknown substance is 1.587J / g degC.
What is the MOLAR heat of combustion of methane(CH₄) if 64.00g of methane are burned to heat 75.0 ml of water from 25.00°C to 95.00°C?(Water heat capacity-4.184 J/g°C)
Answer:
-5.51 kJ/mol
Explanation:
Step 1: Calculate the heat required to heat the water.
We use the following expression.
[tex]Q = c \times m \times \Delta T[/tex]
where,
c: specific heat capacitym: massΔT: change in the temperatureThe average density of water is 1 g/mL, so 75.0 mL ≅ 75.0 g.
[tex]Q = 4.184J/g.\°C \times 75.0g \times (95.00\°C - 25.00\°C) = 2.20 \times 10^{3} J = 2.20 kJ[/tex]
Step 2: Calculate the heat released by the methane
According to the law of conservation of energy, the sum of the heat released by the combustion of methane (Qc) and the heat absorbed by the water (Qw) is zero
Qc + Qw = 0
Qc = -Qw = -22.0 kJ
Step 3: Calculate the molar heat of combustion of methane.
The molar mass of methane is 16.04 g/mol. We use this data to find the molar heat of combustion of methane, considering that 22.0 kJ are released by the combustion of 64.00 g of methane.
[tex]\frac{-22.0kJ}{64.00g} \times \frac{16.04g}{mol} = -5.51 kJ/mol[/tex]
The combustion of titanium with oxygen produces titanium dioxide: Ti(s) + O 2(g) → TiO 2(s) When 2.060 g of titanium is combusted in a bomb calorimeter, the temperature of the calorimeter increases from 25.00°C to 91.60°C. In a separate experiment, the heat capacity of the calorimeter is measured to be 9.84 kJ/K. The heat of reaction for the combustion of a mole of Ti in this calorimeter is ________ kJ/mol.
Answer: The heat of reaction for the combustion of titanium is 15240 kJ/mol
Explanation:
The quantity of heat required to raise the temperature of a substance by one degree Celsius is called the specific heat capacity.
[tex]Q=C\times \Delta T[/tex]
Q = Heat absorbed by calorimeter =?
C = heat capacity of calorimeter = 9.84 kJ/K
Initial temperature of the calorimeter = [tex]T_i[/tex] = [tex]25.00^0C=(25.00+273)=298.00K[/tex]
Final temperature of the calorimeter = [tex]T_f[/tex] = [tex]91.60^0C=(91.60+273)K=364.6K[/tex]
Change in temperature ,[tex]\Delta T=T_f-T_i=(364.6-298.0)K=66.60K[/tex]
Putting in the values, we get:
[tex]Q=9.84kJ/K\times 66.60K=655.3kJ[/tex]
As heat absorbed by calorimeter is equal to heat released by combustion of titanium
[tex]Q=q[/tex]
[tex]\text{Moles of titanium}=\frac{\text{given mass}}{\text{Molar Mass}}=\frac{2.060g}{47.8g/mol}=0.0430mol[/tex]
Heat released by 0.0430 moles of titanium = 655.3 kJ
Heat released by 1 mole of titanium = [tex]\frac{655.3}{0.0430}\times 1=15240kJ[/tex]
The heat of reaction for the combustion of titanium is 15240 kJ/mol
Fill in the blanks with the word that best completes each statement. Scientists develop knowledge by making about the natural world that may lead to a scientific question. A scientific question may lead to a(n) , which can be tested. The results of can lead to changes in scientific knowledge.
A scientific question may lead to a(n)
The answer is may lead to a hypothesis.
Explanation:
Answer: observations
Hypothesis
Experimentation
Explanation:in order and right on edge
Choose the selection which correctly characterizes all three of the following substances in terms of whether they are polar or nonpolar: SiH4 and BBr3 and SiF4 a) SiH4 is nonpolar and BBr3 is polar and SiF4 is nonpolar. b) SiH4 is nonpolar and BBr3 is polar and SiF4 is polar. c) SiH4 is nonpolar and BBr3 is nonpolar and SiF4 is polar. d) SiH4 is polar and BBr3 is nonpolar and SiF4 is polar. e) SiH4 is nonpolar and BBr3 is nonpolar and SiF4 is nonpolar.
Answer:
SiH4 is nonpolar and BBr3 is nonpolar and SiF4 is nonpolar.
Explanation:
SiH4 is a non-polar compound. Though the Si–H bonds are polar, as a result of different electronegativities of Si and H. However, as there are 4 electron repulsions around the central Si atom, the polar bonds are arranged symmetrically around the central atom having a tetrahedral shape hence they cancel out making the compound nonpolar.
SiF4 is a nonpolar molecule because the fluorine atoms are arranged symetrically around the central silicon atom in a tetrahedral molecule with all of the regions of negative charge cancelling each other out just like in SiH4.
The 3 bromine atoms all lie in the same plane thus the geometry of the compound will be trigonal planar. The BBr3 will be non polar because the three B-Br bonds will cancel out each others' dipole moment given that they are in the same plane.
A non-polar chemical is SiH4. Despite the fact that the Si-H bonds are polar, this is because Si and H have differing electronegativities.
Thus, The polar bonds are symmetrically organized around the center Si atom, which has a tetrahedral form, and thus cancel out because there are four electron repulsions around it, rendering the combination nonpolar.
Because the fluorine atoms are symmetrically positioned around the center silicon atom in a tetrahedral molecule with all of the negative charge regions canceling each other out, SiF4 is a nonpolar molecule and electronegativities.
The geometry of the compound will be trigonal planar since all three bromine atoms are located in the same plane. The three B-Br bonds will cancel, making the BBr3 non-polar.
Thus, A non-polar chemical is SiH4. Despite the fact that the Si-H bonds are polar, this is because Si and H have differing electronegativities.
Learn more about SIF4, refer to the link:
https://brainly.com/question/8200024
#SPJ6
What is the concentration of hydronium ion ( [H3O+]) in a solution with a PH of _1,3?
Answer: [H3O+]= 0.05 M
Explanation:
Message me for extra explanation.
snap- parkguy786
how many moles of 0.225 m ca oh 2 are present in 0.350 l of solution
Answer: 0.225, x, 0.0788
Explanation:
The following balanced equation shows the formation of ethane (C2H6).
C2H2 + 2H2 - C2H6
How many moles of hydrogen are needed to produce 13.78 mol of ethane?
3,445 mol
6.890 mol
27.56 mol
55.12 mol
Answer:
C
Explanation:
Well, we can see from the equation that hydrogen gas and ethane are in a 2:1 ratio based on their mole coefficients.
You need 2 mol H2 to make 1 mol C2H6. So that means you need 2*13.78 mol H2 to make 13.78 mol C2H6!
2*13.78 = 27.56 mol
C is correct.
Common additives to drinking water include elemental chlorine, chloride ions, and phosphate ions. Recently, reports of elevated lead levels in drinking water have been reported in cities with pipes that contain lead, Pb(s). When Cl2(aq) flows through a metal pipe containing Pb(s), some of the lead atoms oxidize, losing two electrons each, and aqueous chloride ions form. (a) Write a balanced, net-ionic equation for the reaction between Pb(s) , and
Answer:
Check the explanation
Explanation:
Kindly check the attached image below to see the step by step explanation to the question above.
A common addiction to the common water is the elemental chlorine and chlorine ions, the phosphate ions. Recent reports of the higher levels of lead in cities have to lead to the Pb(s) as CI 2 flows in petal pipes some may be oxidized.
They balanced equation of the net ionic reactions.
Pb(s) + Cl2(g) ----- Pb2+ + 2Cl- oxidation reaction :Pb(s) --- Pb2+ + 2e- Reduction reaction:Cl2 + 2e- -----Cl-Learn more about the chloride ions and phosphate ions.
brainly.com/question/16447254.
why would defective collagen proteins affect an individuals joints?
Answer:
Defective collagen proteins affect an individuals joints, as collagen is an important component protein in body connective tissues
Explanation:
Collagen is a crucial protein in the extracellular matrix of various connective tissues in body (tendons, ligaments, muscles). It constitutes major protein component in mammals body.
Collagen Vascular disease is a group of diseases affecting 'collagen' connecting tissue. Apart from inheritance, they can con occur due to autoimmune disease. This implies that body's immune system fights against itself & mistakenly damages its own tissues. So, these diseases have a huge bearing on body joints components. Eg : Lupus , Arthritis are common collagen vascular diseases. Arthritis mostly affects adults above 30 years of age, lupus can be diagnosed in younger people above 15 years of age also.
Which of the following item(s) explain the differences between the Ka values. Choose one or more: A. The oxidation state for oxygen in trifluoroacetate is more negative than the oxidation state for oxygen in acetate. B. The trifluoroacetate molecule has more resonance structures than the acetate molecule. C. The electron-withdrawing fluorine atoms pull electron density from the oxygen in trifluoroacetate. The negative charge is more stabilized in trifluoroacetate by this effect. D. The negative charge is on the more electronegative fluorine atom in trifluoroacetate.
Answer:
C. The electron-withdrawing fluorine atoms pull electron density from the oxygen in trifluoroacetate. The negative charge is more stabilized in trifluoroacetate by this effect.
Explanation:
The structures of trifluoroacetate and acetic acid are both shown in the image attached.
The trifluoroacetate anion (CF3CO2-), just like the acetate anion has in the middle, two oxygen atoms.
However, in the trifluoroacetate anion, there are also three electronegative fluorine atoms attached to the nearby carbon atom attached to the carbonyl, and these pull some electron density through the sigma bonding network away from the oxygen atoms, thereby spreading out the negative charge further. This effect, called the "inductive effect" stabilizes the anion formed,the trifouoroacetate anion is thus more stabilized than the acetate anion.
Hence, trifluoroacetic acid is a stronger acid than acetic acid, having a pKa of -0.18.
Hope this helps!
Please mark brainliest!
The acid dissociation constant (Ka) is used to distinguish strong acids from weak acids. Strong acids have exceptionally high Ka values.
The Ka value is found by looking at the equilibrium constant for the dissociation of the acid. The higher the Ka, the more the acid dissociates.
The structures of trifluoroacetate and acetic acid are both shown in the image attached. It contains
The trifluoroacetate anion[tex](CF_3CO_2^-)[/tex],The acetate anion Two oxygen atoms.
However, in the trifluoroacetate anion, there are also three electronegative fluorine atoms attached to the nearby carbon atom attached to the carbonyl.
These pull some electron density through the sigma bonding network away from the oxygen atoms, thereby spreading out the negative charge further. This effect, called the "inductive effect" stabilizes the anion formed, the trifluoroacetate anion is thus more stabilized than the acetate anion.
Hence, the correct option is C that is The electron-withdrawing fluorine atoms pull electron density from the oxygen in trifluoroacetate. The negative charge is more stabilized in trifluoroacetate by this effect.
For more information, refer to the link:-
https://brainly.com/question/12271256
Which of the following molecules nonpolar?
○ CHCl3
○ CH2Cl2
○ CH3Cl
○ None, they are polar.
Answer:
CHC13
Explanation:
IS PLUTO ROCKY OR GASY
Answer:
Rocky.
Explanation:
Jovian planets are giant gas balls not unlike the SUN although they have a small rocky central core. Pluto is a rock ice planet---more like Europa, a satellite of Jupiter. In fact, Pluto is probably the largest of the so-called KUIPER BELT objects
Does a part or slice of a substance have a different density than the whole piece?
Pls help!
A slice or part of a homogeneous substance has the same density as the whole piece because the density is uniform throughout. In a heterogeneous substance, the density can vary and depends on the composition and structure of the part being measured. Density is found by dividing mass by volume and is useful for identifying substances.
The density of a substance is defined as its mass divided by its volume. In a homogeneous material, the density is consistent throughout, which means a slice or part of the substance would have the same density as the whole piece. For example, a solid iron bar is homogeneous, and therefore any part of it would have the same density as the entire bar. However, in a heterogeneous material, the density can vary from one part to another; an instance of this is Swiss cheese, which contains air pockets resulting in variable local densities.
To determine the density of a substance, you would divide the mass by the volume of the substance. This method applies to both whole objects and parts thereof. In the case of a cube, the volume is found by cubing the edge length. In practice, density is often used to help identify substances by comparison with known values, as different substances have characteristic densities.
A student states that this structural formula represents a hydrocarbon.
H H
H-C-0-0-H
I-0-I
Is the student correct?
Yes, a hydrocarbon is any compound that contains a carbon backbone.
Yes, a hydrocarbon is any compound that contains hydrogen and oxygen.
No, a hydrocarbon contains only carbon and hydrogen atoms.
No, a hydrocarbon contains at least one double or triple bond.
Answer:
Yes, a hydrocarbon is any compound that contains hydrogen and oxygen.
Explanation:
The cell potential for the cell Zn(s) + 2H+(? M) LaTeX: \longrightarrow⟶ Zn2+(1.3 M) + H2(g) (8 atm) is observed to be 0.68 V. What is the pH in the H+/H2 half-cell? Reduction potential for H2(g)/H+(aq) is 0.00 V, for Zn(s)/Zn2+(aq) is -0.76 V. Enter number to 2 decimal places.
Answer:
pH in the [tex]H_{2}/H^{+}[/tex] half cell is 0.84.
Explanation:
Oxidation: [tex]Zn(s)-2e^{-}\rightarrow Zn^{2+}(aq.)[/tex]
Reduction: [tex]2H^{+}(aq.)+2e^{-}\rightarrow H_{2}(g)[/tex]
-------------------------------------------------------
Overall: [tex]Zn(s)+2H^{+}(aq.)\rightarrow Zn^{2+}(aq.)+H_{2}(g)[/tex]
[tex]E_{cell}^{0}=E_{H^{+}\mid H_{2}}^{0}-E_{Zn^{2+}\mid Zn}^{0}[/tex] = (0.00 V) + (0.76 V) = 0.76 V
According to Nernst equation for this cell reaction at room temperature (298 K):
[tex]E_{cell}=E_{cell}^{0}-\frac{0.0592}{n}log\frac{[Zn^{2+}].P_{H_{2}}}{[H^{+}]^{2}}[/tex]
where, [tex]E_{cell}[/tex] is cell potential, n is number of electron exchanged, [tex]P_{H_{2}}[/tex] is pressure of [tex]H_{2}[/tex] in atm and species under third bracket represent molarity of the respective species.
So, [tex]0.68V=0.76V-\frac{0.0592}{2}log\frac{(1.3M)\times (8atm)}{[H^{+}]^{2}}V[/tex]
[tex]\Rightarrow[/tex] [tex][H^{+}]=0.1436M[/tex]
pH = [tex]-log[H^{+}][/tex] = -log(0.1436) = 0.84
Final answer:
The pH in the H+/H2 half-cell of the given galvanic cell is 8.5.
Explanation:
In the given galvanic cell, the reduction half-reaction is 2H+ (aq) + 2e → H₂(g), and the overall reaction is Zn(s) + 2H+ (aq) -> Zn²+ (aq) + H₂(g). The reduction potential for the H2(g)/H+(aq) half-reaction is 0.00 V, and for the Zn(s)/Zn²+(aq) half-reaction is -0.76 V.
To find the pH in the H+/H2 half-cell, we can use the Nernst equation:
Ecell = E°cell - (0.0592 V / n) * log[H+]
Using the given cell potential of 0.68 V and plugging in the values, we can calculate the pH in the H+/H2 half-cell to be 8.5.
HELPPP!!! what is the volume (in liters) of a 5.72 gram sample of 02 at STP? (Hint: remember to change grams of oxygen to moles of oxygen first) molar mass of 02 =32g/mol
Answer:
4L
Explanation:
To obtain the volume of O2 at stp, first, we need to determine the number of mole of O2.
From the question given above,
Mass of O2 = 5.72g
Molar Mass of O2 = 32g/mol
Number of mole =Mass/Molar Mass
Number of mole of O2 = 5.72/32
Number of mole of O2 = 0.179 mole
Now, we can calculate the volume of O2 at stp as follow:
1 mole of a gas occupy 22.4L at stp.
Therefore, 0.179 mole of O2 will occupy = 0.179 x 22.4 = 4L
Therefore, the volume occupied by the sample of O2 is 4L
The volume of a 5.72 gram sample of oxygen at STP is approximately 4.01 liters, after converting the mass to moles and using the molar volume of a gas at STP.
To calculate the volume of oxygen at Standard Temperature and Pressure (STP) from the given mass, first convert the mass of oxygen to moles. At STP, 1 mole of gas occupies 22.4 liters. Use the molar mass of Oxygen (32 g/mol) to convert grams to moles and then use the volume of 1 mole of gas at STP to find the volume in liters.
First, convert the given mass of oxygen (5.72 g) to moles:
5.72 g [tex]O_{2}[/tex]
x
1 mol [tex]O_{2}[/tex]/ 32 g [tex]O_{2}[/tex]
= 0.179 moles [tex]O_{2}[/tex]
Then calculate the volume at STP (using the fact that 1 mole of any gas at STP occupies 22.4 liters):
0.179 moles [tex]O_{2}[/tex]
x
22.4 liters/mol
= 4.0096 liters
Therefore, the volume of a 5.72 gram sample of [tex]O_{2}[/tex] at STP is approximately 4.01 liters.