Answer:
The correct option is:
A) by direct or indirect contact between objects at different temperatures
Explanation:
Heat can be transferred in three different methods:
Conduction, Convection and Radiation
Conduction is heat transfer through direct contact between substances at different temperatures.
Convection is the heat transfer which takes place through air currents.
Radiation is the heat transfer that does not require contact between two objects.
Hence, heat transfer can take place through direct or indirect contact between objects at different temperatures.
The number of atoms in 5.78 mol NH4NO3. Show your work.
Answer:
3.481 x 10²⁴ atoms
Explanation:
Data Given:
Number of moles of NH₄NO₃ = 5.78 mol
Number of atoms of NH₄NO₃ = ?
Solution:
Formula used
no. of moles = no. of atoms / Avogadro's number
As we have to find no. of atoms
So, we have to rearrange the above equation
no. of atoms = no. of moles x Avogadro's number . . . . . (1)
Where
Avogadro's number = 6.022 x 10²³ atoms
Put values in above Equation 1
no. of atoms = 5.78 mol x 6.022 x 10²³ atoms/mol
no. of atoms = 3.481 x 10²⁴ mol
So,
no. of atoms in 5.78 mole NH₄NO₃ = 3.481 x 10²⁴ atoms
Answer:
The answer is 3.48 × 10²⁴
Explanation:
Avogadro's constant/number is used to get the actual number of particles (atoms or ions) in a molecule of a substance.
Avogadro's number is 6.022 × 10²³
To get the actual number of atoms in a substance: avogadro's constant is multiplied by the number of moles of the substance
Hence,
number of atoms = 5.78 × 6.022 × 10²³
number of atoms in 5.78 moles of NH₄NO₃ = 3.48 × 10²⁴
if 2.4g of magnesium burns in oxygen. calculate (I) the mass of magnesium oxide formed (ii) volume of oxygen at stp.
Answer: i. 4g of MgO
ii. 1.12dm3
Explanation:Please see attachment for explanation
Surrounding ions with water molecules is known as
Answer:
Hydration
Explanation:
In water, ions are surrounded by a sphere of water molecules called a hydration shell. The process of forming this shell is called hydration.
Help..I asked this question before but I keep getting either between the two B or D and I would really like the correct answer. And if u don’t mind can u perhaps tell me how u searched or what exactly did u search to get the answer?...please and thank you
Answer: I think it’s C
Explanation:
where would you expect to find the smallest atoms?
Answer:
Because of these two trends, the largest atoms are found in the lower left corner of the periodic table, and the smallest are found in the upper right corner (Figure 2.8.
Explanation:
comment how it helps
23. Which of the following describes ionic bonds?
a. lonic bonds are weak bonds between two water molecules
Electrons are shared between two atoms
C. Electrons are transferred from one atom to another
d. Protons are transferred from one atom to another
Answer:
b.Electrons are shared between two atoms.
What is the answer to this chemthink?
Answer:
1 and 2
Explanation:
Releasing some of the gas would reduce the amount of atoms inside the container therefore reducing pressure.
Cold temperature would slow down the particles in the container leading to fewer collisions per second which translates to less pressure
Balance this equation C6H14(g) + O2(g) → H2O(g) + CO2(g)
Answer:
2 C6H14 + 19 O2 = 12 CO2 + 14 H2O
Explanation:
Final answer:
The combustion of hexane (C6H14) is balanced by setting appropriate coefficients for CO2 and H2O to match the number of C and H atoms and then adjusting the O2 to balance the oxygen atoms, resulting in a balanced equation with equal numbers of each atom on both reactant and product sides.
Explanation:
To balance the chemical equation for the combustion of hexane (C6H14), we must ensure that the number of atoms for each element is the same on both the reactant and product sides. Given the unbalanced equation C6H14(g) + O2(g) → H2O(g) + CO2(g), we balance it step by step.
First, balance the carbon (C) atoms by setting the coefficient for CO2 equal to the number of C atoms in C6H14:
C6H14(g) + O2(g) → H2O(g) + 6CO2(g)
Next, balance the hydrogen (H) atoms by setting the coefficient for H2O equal to half the number of H atoms in C6H14:
C6H14(g) + O2(g) → 7H2O(g) + 6CO2(g)
Finally, count the number of oxygen (O) atoms in the products (6*2 for CO2 and 7 for H2O equals 19 O atoms) and balance it with the oxygen molecules (O2) in the reactants:
2C6H14(g) + 19O2(g) → 14H2O(g) + 12CO2(g)
This yields a balanced equation with 12 carbon atoms, 28 hydrogen atoms, and 38 oxygen atoms on each side.
Check your work to confirm that all atoms balance and that there are no fractional coefficients. The equation is now balanced.
If atoms
energy during a change of state, they are pulled together by attractive forces and become more organized.
Answer:
If atoms lose energy during a change of state, they are pulled together by attractive forces and become more organized.
Explanation:
Change of state is the process by which substances pass from one state of agregation to another. The aggregation states are solid, liquid and gas. This state of aggregation depends on the cohesion forces that hold the particles together.
The change of state of substances consists of an exchange of energy. If it occurs when the body or system gives energy to the environment, the changes in state that occur are:
Solidification. Change of state from liquid to solid. Condensation. Change state from gas to liquid. Inverse sublimation. Change of state of gas directly to solid.Intermolecular forces are attractive forces between molecules. In the solid state, the intermolecular forces are relatively intense. In this case the molecules occupy a rigid position and have virtually no freedom to move. They only vibrate around the equilibrium positions. In the liquid state the intermolecular forces are not as strong as in the solid state, therefore, the particles have a certain freedom of movement. Liquids do not have a definite form, but take the form of the container that contains them. The molecules have limited movements of rotation, vibration and translation. Finally, in the gaseous state, the intermolecular forces between the particles are very weak, generating the particles great mobility. These particles tend to be great distances between them and there is no appreciable interaction between them.
Then it is possible to say that the intermolecular forces of attraction become stronger than before and become more organized and stable when the changes in the state of solidification, condensation and inverse sublimation occur.
Finally, If atoms lose energy during a change of state, they are pulled together by attractive forces and become more organized.
Consider the total ionic equation below.
2H⁺+ CrO²⁻₄+Ba²⁺+2OH⁻-->Ba²⁺+CrO²⁻₄+2H2O
What are the spectator ions in this equation?
H+ and OH-
H+ and Ba2+
CrO²⁻₄ and OH⁻
CrO²⁻₄ and Ba²⁺
Answer:
The spectator ions in this equation are :
CrO²⁻₄ and Ba²⁺
Explanation:
Spectator ions : These are the ions which are present in the solution but do not take part in chemical reaction.They are present as such in both reactant as well as product .
In this reaction,
1.H+ and OH- are combined and converted into water (H2O) : Changed to H2O
So , H+ and OH- are not Spectator ions
2.CrO²⁻₄ and Ba²⁺ are unchanged . Present as such in product and reactants
CrO²⁻₄ and Ba²⁺are Spectator ions
The spectator ions in this equation are CrO²⁻₄ and Ba²⁺. Therefore, option D is correct.
What is an ionic equation ?The term an ionic equations are defined as the chemical equations that show only ions that participate in a chemical reaction. In other words, the ions that react together in solution and form new substances. The other ions that don't participate are called spectator ions.
Spectator ions are defined as the ions which are present in the solution but do not take part in chemical reaction.They are present as such in both reactant and product .
In the given reaction,
1.H+ and OH- are mixed and converted into water (H2O)
So , H+ and OH- are not Spectator ions
2.CrO²⁻₄ and Ba²⁺ are unchanged . Present as such in product and reactants.
Therefore, CrO²⁻₄ and Ba²⁺ are Spectator ions
Thus, option D is correct.
To learn more about an ionic equation, follow the link;
https://brainly.com/question/15467511
#SPJ6
Plants undergo photosynthesis to produce glucose according to the reaction below. What mass of water is required to produce 5.0g of glucose?
6CO2 + 6H2O --> C6H12O6 + 6O2
a. 3.0 g H2O
b. .50 g of H2O
c. 5.0 g H2O
d. 18 g H2O
Answer:
option a) 3 g
Explanation:
mass of Glucose = 5 g
Mass of H₂O = ?
Reaction Given:
6CO₂ + 6H₂O ----> C₆H₁₂O₆ + 6O₂
Solution:
First we have to find mass of glucose from balanced reaction.
So,
Look at the reaction
6CO₂ + 6H₂O -------> C₆H₁₂O₆ + 6O₂
6 mol 1 mol
As 6 mole of water (H₂O) give 1 mole of Glucose (C₆H₁₂O₆ )
Convert moles to mass
molar mass of C₆H₁₂O₆ = 6(12) + 12(1) + 6(16)
molar mass of C₆H₁₂O₆ = 72 + 12 + 96
molar mass of C₆H₁₂O₆= 180 g/mol
molar mass of H₂O = 2(1) + 16 = 18 g/mol
Now
6CO₂ + 6H₂O ---------> C₆H₁₂O₆ + 6O₂
6 mol (18 g/mol) 1 mol (180 g/mol)
108 g 180 g
108 g of water (H₂O) produce 180 g of glucose (C₆H₁₂O₆)
So
if 108 g of water (H₂O) produce 180 g of glucose (C₆H₁₂O₆) so how many grams of water (H₂O) will be required to produce 5 g of glucose (C₆H₁₂O₆).
Apply Unity Formula
108 g of water (H₂O) ≅ 180 g of glucose (C₆H₁₂O₆)
X g of water (H₂O) ≅ 5 g of glucose (C₆H₁₂O₆)
Do cross multiply
mass of water (H₂O) = 108 g x 5 g / 180 g
mass of water (H₂O) = 3 g
So 3 g of water is required to produce 5 g of glucose.
Describe the sampling method for determining population size
Answer:
Describe the sampling method for determining population size. The sampling method involves counting the total number of organisms in a certain area and then using that number to determine the total number of organisms in a larger area.
Explanation:
How do you know the strength of oxidizing/reducing agents in questions such as these ones? I know the answer for 37 is D but I don’t know why
Answer:
[tex]Pd^{2+}[/tex] is the strongest oxidizing agent .
Explanation:
It is said in the question that given reactions are spontaneous.
As [tex]Np^{3+}[/tex] oxidizes Ce to [tex]Ce^{3+}[/tex] we can say that [tex]Np^{3+}[/tex] is a stronger oxidizing agent than [tex]Ce^{3+}[/tex].
Similarly , [tex]Cd^{2+}[/tex] is stronger than [tex]Np^{3+}[/tex] (from first reaction).
From second reaction we can see that [tex]Pd^{2+}[/tex] is stronger than [tex]Cd^{2+}[/tex].
The order of oxidizing strength is [tex]Pd^{2+}[/tex] > [tex]Cd^{2+}[/tex] > [tex]Np^{3+}[/tex] > [tex]Ce^{3+}[/tex] .
Which type of rock is most likely to form because of high heat and pressure?
igneous
magma
sediment
metamorphic
Answer:
metamorphic
Explanation:
Metamorphic rocks form from heat and pressure changing the original or parent rock into a completely new rock. The parent rock can be either sedimentary, igneous, or even another metamorphic rock. -
samikshajadhav16
Answer:
Explanation:
D
To what pressure would you have to compress 48.0 L
of oxygen gas at 99.3 kPa in order to reduce its vol-
ume to 16.0 L?
Answer:
298 kPa
Explanation:
Data Given:
initial Volume of oxygen V1= 48.0 L
Final Volume of oxygen V2= 16.0 L
initial pressure of oxygen P1= 99.3 kPa
initial Pressure of oxygen P2= ?
Solution:
The Boyle's law formula will be applicable here at constant temperature
Boyle's law formula
P1V1 = P2V2
As we have to find final pressure so rearrange the equation
P2 = P1V1 /V2 ....................(1)
Put values in Equation 1
P2 = 99.3 kPa x 48 L /16 L
P2 = 298 kPa
So the final pressure will be 298 kPa
As the model in the picture shows, I am confused that why the work by gas during the expansion is -P times deltaV (P represents the external pressure). In my view, this should be the work done on the gas by environment. And the work done by gas should be the pressure of the gas (i.e. the internal pressure) which is changed by the volume of gas. (PS. The picture is from a chapter about thermochemistry in my General Chemistry textbook)
Answer:
Here's what I get
Explanation:
Assume that the piston is weightless and frictionless and has an area of 0.01 m², and that the cylinder contains 0.001 m³ of air at 1 bar.
Then the gas is slowly heated, making the gas expand and force the piston up until the volume is 0.002 m³.
The gas is doing work, because it is pushing back against the pressure of the atmosphere in order to expand. The sign is negative, because of the thermodynamic convention that anything going out of the system is negative.
How much work has the gas done?
w = F × d, and
p = F/A, so
F = p × A. Then
w =p × A × d
A × d is the change in volume (ΔV) swept out by the piston as the gas expands. Thus
w = -pΔV (negative sign because of the convention)
= -1 × 10⁵ Pa × 0.001 m³ =-100 Pa·m³ = -100 J
The gas has done 100 J of work by expanding against an external pressure.
Answer:
actually the sign convention in physics and chem varies:
Explanation:
In chem , work done by the system (gas) is taken as negative.
Work done on the system (gas) is taken as positive.
this is because when the gas does work , its internal energy decreases and thus it looses energy upon doing work , so it is taken as negative.
delta V is the change in volume.
P is the ext. pressure.
Now , to make it simple , when external pressure is applied to the gas , it gets compressed and thus it (gas) does work by exerting more pressure on the walls of the cylinder, which is why it is -P.
8.
number of trees people cut down.
Compared to developing nations, developed nations have
lower health standards.
greater personal wealth.
faster-growing populations.
higher health standards.
Hardin's "Tragedy of the Commons" essay addresses the conflicts associated with what environmental chal
Final answer:
The Tragedy of the Commons, described by Garrett Hardin, highlights how individual actions based on self-interest can lead to the depletion of shared resources, exemplified by environmental issues like overfishing, deforestation, and air pollution. It underscores the conflict between individual interests and the common good.
Explanation:
The concept of the Tragedy of the Commons was introduced by Garrett Hardin in 1968 to describe a dilemma in which multiple individuals acting independently and rationally according to their own self-interest can ultimately deplete a shared limited resource, even when it is clear that it is not in anyone's long-term interest for this to happen. This concept applies to environmental issues such as overfishing, deforestation, and air pollution. Hardin's essay illustrates the conflict between individual interests and the common good, and the need for responsible resource management.
Examples today include the overuse of fisheries, forest areas, and the Earth's atmosphere as a dumping ground for greenhouse gases. The Tragedy of the Commons extends to various aspects of the environment, where the absence of restrictions leads to the over-exploitation of resources and environmental degradation. The predicament lies in the freedom of individuals to use common resources without considering the long-term effects and sustainability, potentially leading to the ruin of the resources for everyone.
Name the following compound:
C5Si7
Answer:
Pentacarbon heptasilicide.
Explanation:
In order to name the following compound, we need to identify whether it is molecular or ionic.
Molecular compounds consist of non-metal atoms, while ionic compounds would have metal cations in their composition.
In the given compound, [tex]C_5Si_7[/tex], we have two non-metals, carbon and silicon, meaning we should follow the molecular compound naming rules. The rules involve using prefixes to state the number of individual atoms.
The two prefixes required here are 'penta' for 'five' to indicate 5 carbon atoms present and 'hepta' for 'seven' to indicate 7 silicon atoms present.
The first part of the name would be pentacarbon (notice that the standard name for the first element is used). The second part would be heptasilicide (notice that the second atom would have an ending of -ide followed by the standard beginning of silicon).
Periodicity is best defined as:
the fact that elements increase in atomic mass in a regular way
the repeating nature of physical and chemical properties with atomic numbe
the regular growth of atomic size with atomic mass
the consistent decrease of nuclear charge with atomic mass
the repeating nature of atomic nuclear structure
Answer:
The repeating nature of physical and chemical properties with atomic number
Explanation:
Periodic table is designed in a way in which elements are divided in groups and periods. Periods are rows and groups are columns. The elements in groups share similar properties due to the same number of valence electrons they have. Going along each period, we'll always get back to the same group at some point. This is why we have periodic trends, the trends repeat gradually when we finally reach the same group we're analyzing.
Physical and chemical properties vary periodically. For example:
atomic radius decreases from left to right along the period;ionization energy increases from left to right along the period;electronegativity increases from left to right along the period;metallic properties decrease from left to right along the period.How many atoms are there in 18 grams of silver
Answer:
Number of atoms= [tex]1.004\times 10^{23}[/tex] atoms
Explanation:
1 mole is the mass of substance which contain [tex]6.022\times 10^{23}[/tex]
particles of that substance.Its symbol is 'n'.
Here the quantity[tex]6.022\times 10^{23}[/tex] is called Avogadro number and it is denoted by [tex]N_{0}[/tex].
Mass of the substance in grams is called is molar mass.It is denoted by'M'
Moles can be calculated by :
1) [tex]n=\frac{given\ mass}{molar\ mass}=\frac{w}{M}[/tex]
2)[tex]n=\frac{Number\ of\ particles}{Avogadro\ number}=\frac{N}{N_{0}}
[/tex]
compare 1) and 2) formula, we get
[tex]\frac{N}{N_{0}=\frac{w}{M}[tex].................(i)
For silver (Ag), M=107.86 g
w=18 g (given) and [tex]{N_{0}=6.022\times 10^{23}[/tex]
Put the values of w,M and [tex]{N_{0}[tex] in equation (i) and solve for N
[tex]\frac{N}{6.022\times 10^{23}}=\frac{18}{107.86}[/tex]
[tex]N=\frac{18}{107.86}\times 6.022\times 10^{23}[/tex]
[tex]N= 1.004\times 10^{23}[tex]
Hence Number of atoms of silver= [tex]1.004\times 10^{23}[/tex] atoms
I need help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Answer is C. 2-Pentene.
Answer:
C
Explanation:
This has diagonal lines, which indicates that it’s C.
Noble gases rarely ever react with other elements. Which rule below explains why?
Octet Rule
Hund's Rule
Aufbau Principle
Pauli Exclusion Principle
Answer:
A.Octet Rule
Explanation:
Because its orbital surface containes eight electrons
Answer:
Octet Rule
Explanation:
The octet rule talks about the tendency of atom to attain 8 electron in it outer shell. When an atom have fewer outer electrons than 8 they tend to easily react to form stable compounds. The atom that has it outer shell fully filled up are usually very stable and hardly go into a reaction. The octet rule is mostly involved with the s and p orbitals.
Noble gases like Neon and Argon have fully filled outer shell. The valency electron is 8. This fully filled valency shell is responsible for the stable nature of these noble gases. These noble gases find it hard to react with other elements. Example includes Neon and Argon which have atomic numbers of 10 and 18 respectively. The electronic configuration can be represented as follows:
Neon → 2 8
Argon → 2 8 8
Juan inflates a balloon and then releases its end to let the balloon go free as air comes out. The balloon then flies around the room.
Answer:
This is because of Newton's third Law of motion :
For every action there is equal and opposite reaction .
Explanation:
When air is squeezed out from the balloon , the potential energy (Shape of balloon) is converted into Kinetic energy. This kinetic energy is possessed by fast moving air particles coming out from balloon.These air particles are pushed backward,so according to Newtons third law , the balloon should fly upward.
[tex]F_{AB} = - F_{BA}[/tex]
Answer:
According to Newton’s third law of motion, the balloon is pushed forward as the air is forced out.
Explanation:
Action, Reaction
How did early chemists determine which substances were elements?
(A) They knew how many protons were in the atoms.
(B) They knew how many electrons were in the outer shell of every atom.
(C) They knew what substances were mixtures.
(D) They knew which substances could not be broken down by chemical means.
｡☆✼★ ━━━━━━━━━━━━━━ ☾
The correct answer would be option D
Have A Nice Day ❤
Stay Brainly! ヅ
- Ally ✧
｡☆✼★ ━━━━━━━━━━━━━━ ☾
They knew which substances could not be broken down by chemical means.
By definition, an element is the smallest part of a substance which has independent existence and can not be broken down by chemical means.
We must remember that the early chemists didn't have the luxury of the sophisticated equipment we have today many of which can literally "see through" a substance.
The had to depend on rather crude methods and instruments. Amidst all that, they still knew which substances could not be broken down by chemical means and those that could not. Those that could not be broken down by chemical means were labelled as elements and characterized.
Learn more: https://brainly.com/question/14156701
What is the molarity (M) of the following solutions?
a. 19.2 g of Al(OH)3 dissolved in water to make 280 mL of solution
b. A 2.6 L solution made with 235.9 g of KBr
Answer:
The molarity (M) of the following solutions are :
A. M = 0.88 M
B. M = 0.76 M
Explanation:
A. Molarity (M) of 19.2 g of Al(OH)3 dissolved in water to make 280 mL of solution.
Molar mass of Al(OH)3 = Mass of Al + 3(mass of O + mass of H)
= 27 + 3(16 + 1)
= 27 + 3(17) = 27 + 51
= 78 g/mole
[tex]Al(OH)_3[/tex] = 78 g/mole
Given mass= 19.2 g/mole
[tex]Mole = \frac{Given\ mass}{Molar\ mass}[/tex]
[tex]Mole = \frac{19.2}{78}[/tex]
Moles = 0.246
[tex]Molarity = \frac{Moles\ of\ solute}{Volume\ of\ solution(L)}[/tex]
Volume = 280 mL = 0.280 L
[tex]Molarity = \frac{0.246}{0.280)}[/tex]
Molarity = 0.879 M
Molarity = 0.88 M
B .The molarity (M) of a 2.6 L solution made with 235.9 g of KBr
Molar mass of KBr = 119 g/mole
Given mass = 235.9 g
[tex]Mole = \frac{235.9}{119}[/tex]
Moles = 1.98
Volume = 2.6 L
[tex]Molarity = \frac{Moles\ of\ solute}{Volume\ of\ solution(L)}[/tex]
[tex]Molarity = \frac{1.98}{2.6)}[/tex]
Molarity = 0.762 M
Molarity = 0.76 M
A plutonium atom undergoes nuclear fission. Identify the missing element in the nuclear equation.
Answer:
[tex]^92^{234}U[/tex]
Explanation:
Plutonium is a heavy atom with a high mass to neutron ration (N/Z). Atoms with Z > 50 and an M/Z ratio of 1.25 or above tend to decay in a nuclear fission in which they release alpha particle, also known as a helium nucleus.
Let's say that our products are alpha particle and some unknown nucleus X with a mass of M and an atomic number of Z. Then our nuclear decay equation becomes:
[tex]_94^{238}Pu\rightarrow _2^4\alpha + _Z^M{X}[/tex]
In order to identif X, we need to apply the law of mass conservation first. That is, the mass of reactants should be equal to the mass of products:
[tex]238 = 4 + M\therefore M = 238 - 4 = 234[/tex]
Similarly, apply the law of charge conservation to identify Z:
[tex]94 = 2 + Z\therefore Z = 92[/tex]
Z = 92 corresponds to uranium, meaning X is:
[tex]^92^{234}U[/tex]
what is the oxidation number of sulfur in BaSO4?
The oxidation number of sulfur in BaSO₄ is +6.
Explanation:The oxidation number of sulfur in BaSO₄ can be calculated using the guidelines for assigning oxidation numbers.
Guideline 3 suggests that the oxidation number for oxygen is -2.
By using this oxidation number and the ion's formula, guideline 4 can be used to calculate the oxidation number for sulfur:
Let x be the oxidation number for sulfur.
Since there are 4 oxygen atoms in the compound, the sum of the oxidation numbers for the oxygen atoms is -8.
This means that x + (-8) = 0, which implies that x = +6.
Therefore, the oxidation number of sulfur in BaSO₄ is +6.
Learn more about Oxidation number of sulfur here:https://brainly.com/question/32088548
#SPJ3
The oxidation number of sulfur in BaSO₄ is +6.
The oxidation number of sulfur in BaSO₄ can be determined using the rules for assigning oxidation numbers and ensuring the sum of the oxidation numbers equals the charge on the molecule.
Here’s a step-by-step explanation:
Start by noting that barium (Ba) typically has an oxidation number of +2 in its compounds.Oxygen (O) typically has an oxidation number of -2.In BaSO₄, there are four oxygen atoms. Thus, the total oxidation number contributed by oxygen is:4 x (-2) = -8.
Since the compound BaSO₄ is neutral, the sum of the oxidation numbers in BaSO4 must be zero.Let the oxidation number of sulfur (S) be x. According to the sum rule, we have:(+2) + x + (-8) = 0.
Solving for x, we get: x = +6.Therefore, the oxidation number of sulfur in BaSO₄ is +6.
3. At which Celsius temperature does lead change
from a solid to a liquid?
Answer:
the Melting point is 621.5 F or it can be 327.5 C
hope it right
Which ph range is ideal for nitrogen in corn crops
4. A student is doing experiments with CO2(q) . Originally a sample of the gas is in a rigid container at 299 Kand 0.70 atm. The student increases the temperature of the CO2(g) ) in the container to 425 K the CO2(g)mo molecul (b) Calculate the pressure of the CO - (g) ) in the container at 425 K (C) In terms of kinetic molecular theory, briefly explain why the pressure of the CO2(g) in the container changes as it is heated to 425 K. (d) The student measures the actual pressure of the CO2(g) in the container at 425 K and observes that it is less than the pressure predicted by the ideal gas law . Explain this observation ,
Answer:
b. 0,99atm
c. Answer is in the explanation
d. Answer is in the explanation
Explanation:
b. Using Gay-Lussac's law:
P₁T₂ = P₂T₁
P₁: 0,70 atm; T₂: 425K; P₂: ??; T₁: 299K
0,70atm×425K / 299K = 0,99 atm
c. Using kinetic molecular theory, the increasing of temperature increases the kinetic energy of gas particles and if kinetic energy increases, the pressure increases. That means the increasing of temperature increases the pressure in the system.
d. Now, the increases in kinetic energy of gases increase the collisions betwen particles. As these intermolecular forces that are not taken into account in ideal gas law, the observed pressure will be different to the pressure predicted by ideal gas law.
I hope it helps!
The pressure of the gas increases from 0.70 atm to 0.99 atm as the temperature is increased. The interaction of the gas molecules causes the pressure of the gas to deviate from the predicted value.
From the information in the question;
Initial temperature(T1) = 299 K
Initial pressure (P1) = 0.70 atm
Final pressure (P2) = ?
Final temperature (T2) = 425 K
Given that;
P1/T1 = P2/T2
P1T2 = P2T1
P2 = P1T2/T1
P2 = 0.70 atm × 425 K/ 299 K
P2 = 0.99 atm
In terms of the kinetic molecular theory, we know that the pressure of a gas has to do with its bombardment of the walls of the container. When the temperature of the gas is increased, the gas molecules become more energetic and bombard the walls of the container more frequently hence the pressure of the gas increases.
The particles of an ideal gas do not to interact with each other according to theory. However, real gases molecules interact with each other. Hence, actual pressure of the CO2(g) in the container at 425 K is less than the pressure predicted by the ideal gas law. More significant particle interaction decreases the pressure of the gas compared the value predicted based on the ideal gas law.
Learn more: https://brainly.com/question/4147359