An action potential arriving at the presynaptic terminal causes what to occur? multiple choice voltage-gated calcium ion channels open, and calcium ions diffuse into the cell. voltage-gated sodium ion channels open, and sodium ions diffuse into the cell. acetylcholine diffuses into the cell. ligand-gated sodium channels open, and sodium ions diffuse out of the cell. voltage-gated sodium ion channels open, and sodium ions diffuse out of the cell.
An action potential arriving at the presynaptic terminal causes voltage-gated Ca²+ channels to open, allowing calcium ions to enter the cell and triggering the release of neurotransmitters into the synaptic cleft.
Explanation:When an action potential reaches the axon terminal, it depolarizes the membrane and opens voltage-gated Ca²+ channels. Calcium ions enter the cell and initiate a signaling cascade that causes synaptic vesicles containing neurotransmitter molecules to fuse with the presynaptic membrane. This leads to the release of neurotransmitters into the synaptic cleft.
Learn more about neurotransmission here:https://brainly.com/question/34137840
#SPJ6
When atoms lose or gain electrons in chemical reactions they form?
When atoms loose or gain electrons in chemical reactions they form ions on loosing electrons they form cations and on gaining electrons they form anions.
What are ions?
An ion is defined as an atom or a molecule which has a net electrical charge. There are 2 types of ions :1) cation 2) anion . The cation is the positively charged ion and anion is the negatively charged ion . As they are oppositely charged they attract each resulting in the formation of ionic bond.
Ions consisting of single atom are mono-atomic ions while which consists of two or more ions are called as poly-atomic ions . They are created by chemical interactions . They are very reactive in their gaseous state and rapidly react with oppositely charged ions resulting in neutral molecules.
Learn more about ions ,here:
https://brainly.com/question/3110170
#SPJ2
Hotspot volcanoes occur along subduction zones.
a. True
b. False
The neutralization reactions always produced which compound?
Is sodium chloride a solid liquid or gas at room temperature?
In a redox reaction, why does an element’s oxidation number increase?
A.) An element’s oxidation number increases because it gained electrons.
B.) An element’s oxidation number increases because it lost electrons.
C.) An element’s oxidation number increases because it was heated.
D.) An element’s oxidation number increases because it was reduced.
Answer: B) An element’s oxidation number increases because it lost electrons.
Explanation:
A redox reaction is a chemical reaction in which one or more electrons are transferred between the reactants, causing a change in their oxidation states.
The oxidation state or oxidation number is defined as the sum of positive and negative charges of an atom, which indirectly indicates the number of electrons that the atom has accepted or yielded.
By accepting electrons, the oxidation state of an atom decreases, becoming more negative, and therefore, it is reduced. On the other hand, an element that yields electrons increases its oxidation number and oxidizes.
In this way, an element’s oxidation number increase because it lost electrons, becoming a more positive ion.
PLEASE HELP ASAP WILL MARK BRAINLESS AND GIVE 20 POINTS
The process of filtration was used to separate a sample into its components. What conclusion about the sample can be formed based on the technique used?
It was a pure substance.
It was a compound.
It was a heterogeneous mixture.
It was a homogeneous mixture
Identify the more stable isotope in each pair.
Which of these is a pair of isotopes? na+ and na cl-35 and cl-37 f and cl o2 and o3?
Answer:
Cl35 and Cl37.
Explanation:
That would be Cl35 and Cl37 . Two isotopes of the gas chlorine.
What are the two main products of the light-capturing reaction of photosynthesis?
Answer: NADPH and ATP
Explanation:
. An object with a mass of 6.0 kg accelerates 4.0 m/s2 when an unknown force is applied to it. What is the amount of the force? ______________________
Answer:
24 N
Explanation:
we have that an object of mass 6 kg has an acceleration of[tex]4 m/s^2[/tex] to find out the value of the unknown force that is applied we use the following formula
[tex]F= m.a[/tex]
The unit in which the force is expressed is in Newtons
[tex]N= kg.\frac{m}{s^2}[/tex]
[tex]F= 6.0 Kg. 4.0 \frac{m}{s^2}\\ F= 24 N[/tex]
The amount of the applied force is 24 N.
Net force on objectThe net force on an object is determined by applying Newton's second law of motion.
F = ma
where;
F is the applied forcem is the massa is accelerationF = 6 x 4
F = 24 N
Thus, the amount of the applied force is 24 N.
Learn more about Newton's second law of motion here: https://brainly.com/question/3999427
A bond formed by electrical attraction between two oppositely charged ions is called
What is the average speed of an object that travels 50 miles in 2 hours?
Question 3 options:
50 mph
25 mph
100 mph
2 mph
Do you expect to find an atom with 26 protons and mass number of 52 in nature
Calculate the number of chlorine atoms that are present in 66.05 g of dichloromethane, ch2cl2. when you have the number, take its log (base 10) and enter it with three decimal places and without units.
The base-10 logarithm of the number of chlorine atoms is 23.971.
Calculate the number of chlorine atoms that are present in 66.05 g of dichloromethane, CH₂Cl₂. When you have the number, take its log (base 10) and enter it with three decimal places and without units.
Step-by-Step Explanation:
First, determine the molar mass of CH₂Cl₂:
Carbon (C): 12.01 g/mol
Hydrogen (H): 1.01 g/mol (each, so 2.02 g/mol for H₂)
Chlorine (Cl): 35.45 g/mol (each, so 70.90 g/mol for Cl₂)
Total molar mass of CH₂Cl₂ = 12.01 g/mol + 2.02 g/mol + 70.90 g/mol = 84.93 g/mol
Calculate the moles of CH₂Cl₂ in 66.05 g:
66.05 g / 84.93 g/mol = 0.7774 mol CH₂Cl₂
Since each molecule of CH₂Cl₂ contains 2 chlorine atoms, calculate the moles of chlorine atoms:
0.7774 mol CH₂Cl₂ x 2 = 1.5548 mol Cl atoms
Convert moles of chlorine atoms to the number of atoms using Avogadro's number (6.022 x 10²³ atoms/mol):
1.5548 mol x 6.022 x 10²³ atoms/mol = 9.36 x 10²³ chlorine atoms
Take the logarithm base 10 of the result:
log10(9.36 x 10²³ )= 23.971
Therefore, the logarithm (base 10) of the number of chlorine atoms in 66.05 g of dichloromethane, CH₂Cl₂, is 23.971.
Which bond or interaction would be most difficult to disrupt when compounds are placed into water?
Carbon fixation involves the addition of carbon dioxide to _____. carbon fixation involves the addition of carbon dioxide to _____. 3-pga g3p nadph rubp rubisco
Carbon fixation is a part of photosynthesis where CO2 is added to RuBP to form 3-PGA and eventually glucose. The process is catalyzed by the enzyme RuBisCO and also involves the stages of reduction and regeneration.
Explanation:Carbon fixation is a process in photosynthesis where carbon dioxide (CO2) combines with a five-carbon sugar, ribulose bisphosphate (RuBP), to form a six-carbon compound. This reaction is catalyzed by an enzyme called RuBisCO. The six-carbon compound is then broken down into two molecules of 3-phosphoglycerate (3-PGA). This cycle, known as the Calvin cycle, involves not only fixation, but also the stages of reduction and regeneration. Reduction uses ATP and NADPH to convert the 3-PGA into glyceraldehyde 3-phosphate (G3P), some of which is used to build glucose. The remaining G3P is used to regenerate RuBP, using additional ATP, which allows the cycle to continue with more carbon fixation.
Learn more about Carbon fixationhttps://brainly.com/question/7142342
#SPJ12
A sample of a gas originally at 29 °c and 1.25 atm pressure in a 3.0 l container is allowed to contract until the volume is 2.2 l and the temperature is 11 °c. the final pressure of the gas is ________ atm.
The question is about the combined gas law, which factors in pressure, volume and temperature changes in a gas sample. By inserting given values into the combined gas law equation, the final pressure comes out as approximately 1.558 atm.
Explanation:The question pertains to the principles of gas laws, particularly the combined gas law, which states that pressure, volume and temperature of a gas have an interlinked relationship, and thus change proportional to each other, provided the amount of gas is kept constant.
If we denominate the initial conditions as P1, V1 and T1 (in Kelvin), and the final conditions as P2, V2 and T2 (also in Kelvin), then the combined gas law can be written as:
P1*V1/T1 = P2*V2/T2
We know that P1=1.25 atm, V1=3.0 L, and T1=29°C = 302.15 K. The final Volume V2=2.2 L and final temperature T2=11°C = 284.15 K.
Substituting these values into the equation:
1.25 * 3.0/302.15 = P2 * 2.2/284.15
By calculating, we find that P2 = 1.558 atm, which is the final pressure of the gas.
Learn more about Combined Gas Law here:https://brainly.com/question/30458409
#SPJ3
Describe 2 characteristics all metals should display?
How many valence electrons does an atom of any halogen have?
which of the following elements have properties similar to those of strontium (Sr)
A: Y,Zr, Nb
B: Sb, Te, I
C: F, Br, I
D: Be, Mg, Ca
Answer: Option (D) is the correct answer.
Explanation:
It is known that elements which belong to same group show similar chemical properties.
This is because elements which lie in the same group have same number of valence electrons. Hence, they tend to show same type of reactivity which makes them exhibit similar chemical properties.
For example, Be, Mg, Ca and Sr are all group 2 elements. Hence, they tend to show similar chemical properties.
Thus, we can conclude that out of the given options Be, Mg, Ca elements have properties similar to those of strontium (Sr).
The quantity of valence electrons in an element's outermost atomic shell lies in what determines that element's valency. For all elements in the same group, the electrical configuration of the outermost shell is the same. Here the correct option is D.
The quantity of valence electrons in an element determines its physical and chemical properties. The number of valence electrons shared by elements belonging to the same group is constant. As a result, the physical and chemical properties of elements belonging to the same group are comparable.
Be, Mg, Ca and Sr are all group 2 elements. Hence, they tend to show similar chemical properties.
Thus, we can conclude that out of the given options Be, Mg, Ca elements have properties similar to those of strontium (Sr).
Thus the correct option is D.
To know more about elements, visit;
https://brainly.com/question/29545466
#SPJ6
An atom with _______________ electrons in its outer shell makes one happy, satisfied atom
How many electrons can the 7th energy level hold?
Imagine that you have a rectangular swimming pool, but you have no idea how deep it is. You
know that the pool has a volume of 216 m3
. You measured the dimensions of the pool and
found that it is 15 m long and 6 m wide.
A. Calculate the depth of the pool. Show your work.
Chemical reactions with metals may create some interesting results such as a precipitate. What is a precipitate?
Question 3 options:
A. a gas that forms when two liquids are mixed
B. a solid that forms when two liquids are mixed
C. a liquid that forms when two solids are mixed
D. a solid that forms when two gasses are mixed
What is cellular respiration?
A. Converting sunlight to glucose to provide energy for plants
B. Building glucose from smaller hydrocarbons
C. Exchanging O2 for CO2 in the blood within the lungs
D. Using glucose to provide energy for the body
Answer:
It's D.
Explanation:
Trust me.
What is the maximum number of atoms that a carbon atom can bond with in an organic compound?
Answer: 4 atoms
Explanation: Since carbon atom valency is 4 hence it forms 4 bonds with other 4 atoms.
As we know that carbon has atomic number-6 and electronic configuration 1s2 2s2 2p2
And it has 4 electrons in outer shell. These 4 electrons forms bind with other atoms.
What type of composition does an igneous rock have that contains mostly plagioclase feldspar and about 30 percent dark silicate minerals?
A. basaltic
B. granitic
C. andesitic
D. ultramafic
Answer:
The correct answer is option C, that is, andesitic.
Explanation:
Andesite is the term used for a fine-grained extrusive rocks family, which are generally light to dark gray in appearance. They generally weather to different shades of brown. Andesite mostly comprises plagioclase feldspar minerals and may also comprise pyroxene, biotite, or amphibole as the dark silicate minerals. It generally does not comprise olivine or quartz.
What is the electron configuration of an element with atomic number 20?
Answer:
What is the electron configuration of an element with atomic number 20? 1s2 2s2 2p6 3s2 3p6 4s2
Explanation:
Which value gives the number of particles in 1 mol of a substance? 6.02 mc012-1.jpg 1021 6.02 mc012-2.jpg 1022 6.02 mc012-3.jpg 1023 6.02 mc012-4.jpg 1024