What is true of saturated fatty acid chains?
a. They are more healthy that unsaturated fats.
b. They contain only single covalent bonds.
c. They are only made in leaf cells of green plants.
d. They contain at least one double or triple bond.
Statement which is true about saturated fatty acid chains is that they contain only single covalent bonds.
What is covalent bond?
Covalent bond is defined as a type of bond which is formed by the mutual sharing of electrons to form electron pairs between the two atoms.These electron pairs are called as bonding pairs or shared pair of electrons.
Due to the sharing of valence electrons , the atoms are able to achieve a stable electronic configuration . Covalent bonding involves many types of interactions like σ bonding,π bonding ,metal-to-metal bonding ,etc.
Sigma bonds are the strongest covalent bonds while the pi bonds are weaker covalent bonds .Covalent bonds are affected by electronegativities of the atoms present in the molecules.Compounds having covalent bonds have lower melting points as compared to those with ionic bonds.
Learn more about covalent bond,here:
https://brainly.com/question/19382448
#SPJ2
6.002cm= what to sig figs
Answer:
6.002= 4 sig figs
Explanation:
your welcome :)
Balance the following equation in acidic conditions.
Cr2+ + H2MoO4 --> Cr3+ Mo
The process of balancing a redox reaction in acidic conditions involves identifying oxidation states, separating into half-reactions, balancing for mass and charge, and combining. The provided question contains errors, making it impossible to balance as stated.
Explanation:The question you've asked involves balancing a redox reaction in acidic conditions, which is a foundational concept in chemistry. Unfortunately, the equation provided (Cr2+ + H2MoO4 --> Cr3+ Mo) is not completely accurate or clear in terms of the reactants and products involved. Typically, in a redox reaction balancing task, you would identify the oxidation states of the elements involved, separate the reaction into oxidation and reduction half-reactions, balance each for mass and charge, and then combine them back into a full balanced equation. However, it looks like there was some confusion or typo in the equation provided, as H2MoO4 and Mo don't directly relate to the chromium oxidation states changing from Cr2+ to Cr3+.
In general, to balance redox reactions in acidic conditions, you first write the separate half-reactions for oxidation and reduction, balance the atoms in each half-reaction (first the non-oxygen and non-hydrogen atoms, then oxygen by adding H2O, and hydrogen by adding H+ ions), balance the charges by adding electrons, and then combine the half-reactions ensuring that the electrons are balanced. Finally, you would simplify the equation if possible. Without the correct equation, giving a specific balanced reaction is not feasible.
A covalent bond is:
a. the attraction that one atom has for another atom.
b. the attraction between two atoms, formed by the sharing of electrons.
c. formed between the positive charge of a hydrogen atom in one molecule and the negative charge of a nitrogen atom in another nearby molecule.
d. the attraction between a positive ion and a negative ion
Is N2H4 polar, nonpolar, or ionic?
In addition to canyons,what other kinds of geologic formations might separate similar organisms
Geologic formations such as new rivers, valleys, lakes, and unique erosional structures like hoodoos can separate organisms and lead to speciation. The likelihood of this depends on the organisms' dispersal abilities.
In addition to canyons, other geologic formations that might separate similar organisms and lead to allopatric speciation include the formation of new rivers, valleys through erosion, or lakes. For instance, if rodent populations were separated by the formation of a new lake, gene flow between them would be restricted, increasing the likelihood of speciation due to geographic isolation. Conversely, organisms with greater dispersal capabilities, such as flying insects residing in separate valleys, may continue to interbreed due to ongoing gene flow.
Another example is when seeds are carried across the ocean to a new island. This geographic isolation is the foundation of allopatric speciation, which depends significantly on the biology and dispersal abilities of the organism. Variations in erosion resistance can also create unique formations, like the hoodoos in Bryce Canyon, which might further separate populations.
Which factor is responsible for the weak attraction between diatomic molecules of the halogens (group 7A)?
A) Hydrogen bonding
B) Ionic bonding
C) Dipole interactions
D) London dispersion forces
Final answer:
The weak attraction between diatomic molecules of halogens is due to London dispersion forces, which are the result of shifting electron densities within molecules inducing temporary dipoles in neighboring molecules. The correct option is D.
Explanation:
The weak attraction between diatomic molecules of the halogens (group 7A) is mostly due to London dispersion forces. These are van der Waals forces resulting from the constant motion and shifting electron density within any molecule, which can induce a temporary dipole in a neighboring molecule, hence creating a transient dipole-dipole interaction. They are the weakest of the intermolecular forces and are present in nonpolar molecules. Halogens, being nonpolar as diatomic molecules, interact primarily through these forces. In contrast, hydrogen bonding involves a hydrogen atom bonded to a highly electronegative atom like nitrogen, oxygen, or fluorine, and is much stronger than London dispersion forces. Dipole interactions occur in polar molecules where there is a permanent separation of charge. Meanwhile, ionic bonding occurs in compounds consisting of metals and nonmetals and involves the transfer of electrons, leading to the formation of oppositely charged ions, which is significantly stronger than dispersion forces.
A chemist has 2.0 mol of methanol (CH₃OH). The molar mass of methanol is 32.0 g/mol. What is the mass, in grams, of the sample?
16
30
32
64
Answer:
64
Explanation:
Mole of a compound = mass of a compound / molar mass of a compound
Mass of a compound = mole of a compound x molar mass of a compound
Given,
Mole of methanol = 2 mol
Molar mass of methanol = 32 g/mol
Mass of methanol = Mole of methanol x Molar mass of methanol
= 2 mol x 32 g/mol = 64 g
Therefore, the mass, in grams, of the sample = 64
Final answer:
To determine the mass of a 2.0 mol sample of methanol, one should multiply the number of moles by the molar mass, yielding a mass of 64 grams.
Explanation:
The chemist has 2.0 mol of methanol (CH₃OH) with a molar mass of 32.0 g/mol. To find the mass in grams of the methanol sample, we multiply the number of moles by the molar mass of methanol.
Mass = Number of moles × Molar mass = 2.0 mol × 32.0 g/mol = 64 g.
Therefore, the mass of the sample is 64 grams.
How would I do this one?
How many total moles of ions are released when 0.32 mol of NH4Cl dissolves in water?
Final answer:
When 0.32 mol of NH4Cl is dissolved in water, it dissociates into NH4+ and Cl- ions. Since each mole of NH4Cl produces one mole of each ion, the total moles of ions produced will be 0.64 mol.
Explanation:
To determine how many total moles of ions are released when 0.32 mol of NH4Cl dissolves in water, we need to know the dissociation of NH4Cl in water. NH4Cl dissociates into NH4+ and Cl- ions when it dissolves in water.
Step 1: Write out the dissociation equation for NH4Cl:
NH4Cl (s) → NH4+ (aq) + Cl- (aq)
Step 2: Since 1 mole of NH4Cl produces 1 mole of NH4+ ions and 1 mole of Cl- ions, the total moles of ions produced from 0.32 mol of NH4Cl will be:
0.32 mol NH4Cl × 2 mol ions/mol NH4Cl = 0.64 mol ions.
Therefore, 0.32 mol of NH4Cl will produce 0.64 mol of ions in total.
which halogen is solid at stp
Classify these structures as hemiacetal, acetal, or other.
Final answer:
Structures can be classified as hemiacetals when a carbonyl and an alcohol react within the same molecule, usually forming a more stable ring structure in sugars. Acetals form when a hemiacetal reacts with an excess of alcohol, leading to two alkoxy groups on the same carbon. This knowledge is used to classify sugars, especially considering anomers that differ at the anomeric carbon.
Explanation:
The structures provided by students are to be classified as either hemiacetals, acetals, or other. To classify these structures, one must understand the chemical reactions involved in forming these compounds.
A hemiacetal forms when an alcohol (R-OH) reacts with a carbonyl (C=O) group within the same molecule, typically resulting in a stable five- or six-membered ring structure in sugars.
Conversely, an acetal is formed when an excess of alcohol reacts with a hemiacetal, replacing the hemiacetal's hydroxyl (-OH) group with an alkoxy (-OR) group, leading to a compound with two -O-R groups attached to the same carbon atom.
In monosaccharides, these reactions are common and result in cyclic structures.
An important aspect to remember while classifying sugars is the concept of anomers, which are sugars that differ at the anomeric carbon.
The anomeric carbon is the carbon atom that was originally part of the carbonyl group before the intramolecular reaction to form the cyclic hemiacetal.
The interconversion between open-chain and cyclic forms of compounds containing both aldehyde and alcohol groups is a key process in the chemistry of sugars, known as mutarotation.
Final answer:
Hemiacetal structures contain an anomeric carbon bonded to both an -OH and an -OR group, typically in a five- or six-membered ring, while acetals have two -OR groups attached to the same carbon. Acetal formation often occurs with excess alcohol. This process is significant in carbohydrate chemistry and the study of monosaccharides.
Explanation:
Classifying Hemiacetal and Acetal Structures
When classifying structures as hemiacetal, acetal, or other, it is important to understand the molecular configuration of these compounds. A cyclic hemiacetal is formed when an alcohol (R-OH) reacts with a carbonyl (C=O) group within the same molecule, resulting in a structure where the anomeric carbon (the carbonyl carbon) is bonded to both an -OH group and an -OR group. This structure is particularly stable when it forms five- or six-membered rings, which is often the case with monosaccharides like glucose.
In the presence of excess alcohol, the hemiacetal can further react to form an acetal, which is characterized by two -OR groups attached to the same carbon. In simple terms, a hemiacetal will have both an -OH group and an -OR group bonded to the same carbon atom whereas an acetal will have two -OR groups bonded to the same carbon atom.
The process of carbohydrates forming cyclic structures is a key concept in sugar chemistry, particularly with regard to anomers, which are sugars that differ at the anomeric carbon. The ability to draw and interconvert between open-chain and cyclic forms of compounds containing both carbonyl and alcohol groups in the same molecule is a fundamental skill in understanding carbohydrate chemistry.
how do you know which halide salts confirms a presence of F- ions, Cl- ions, Br- ions, and I- ions?
a machine is a device that creates energy
Answer:
Energy cannot be created or destroyed.
Explanation:
is cola or pepsi better?
The preference for Cola or Pepsi is subjective, influenced by personal taste but can be skewed by research methods like in the Pepsi Challenge. Situations like the Soft Drink Commissioner election show how a divided majority could lead to unexpected results. A merger between Coke and Pepsi could be viewed as anti-competitive.
The preference between Cola and Pepsi comes down to personal taste and is subjective. However, in a scenario like the Pepsi Challenge, the preference shown for Pepsi could have been influenced by a confounding variable, such as the knowledge of what each letter represents to the subjects. To redesign the research and eliminate the confound, one would need to ensure that the participants are entirely unaware of which beverage is in each glass, otherwise known as a double-blind test. Additionally, situations like the Soft Drink Commissioner election illustrate how multiple candidates from one party can split the voting population, leading to a win for the single opposing candidate due to a divided majority.
In terms of deciding which is better, Coke or Pepsi, that is not an objective question and varies based on individual preference. However, in a legal context involving a potential merger of the two companies, a judge might consider the effect on competition in the marketplace. If a merger between Coke and Pepsi was proposed, one might argue against it on the grounds of it being anti-competitive, despite any suggested efficiencies.
Chemical bonds are likely to form when
a. two atoms have the same number of electrons.
b. an atom s outer energy level doesn t have the maximum number of electrons.
c. an atom s nucleus has the same number of protons as neutrons.
d. an atom s outer energy level is filled.
b hope it helps i got it right so you should to thanks for asking
Write the empirical formula of at least four binary ionic compounds that could be formed from the following ions: Zn2+, Fe2+, F-, S2-
The binary ionic compounds that can be formed from the ions Zn2+, Fe2+, F-, and S2- are ZnF2, ZnS, FeF2, and FeS.
Explanation:An empirical formula represents the simplest whole-number ratio of atoms in a compound. For binary ionic compounds, the total number of positive charges must equal the total number of negative charges to ensure the compound is neutral. For the ions provided: Zn2+, Fe2+, F-, S2-, we can form the following four binary ionic compounds:
ZnF2: This is formed by combining one Zn2+ ion (with a charge of +2) and two F- ions (each with a charge of -1).ZnS: This is formed by combining one Zn2+ ion (with a charge of +2) and one S2- ion (with a charge of -2).FeF2: This is formed by combining one Fe2+ ion (with a charge of +2) and two F- ions (each with a charge of -1).FeS: This is formed by combining one Fe2+ ion (with a charge of +2) and one S2- ion (with a charge of -2).Learn more about Binary Ionic Compounds here:https://brainly.com/question/1669915
#SPJ12
a _ is a possible explanation for a problem using what you know and what you observe a-conclusion b-thesis c-theory d- hypothesis
Answer:
D: HYPOTHESIS is a possible explanation for a problem using what you know and what you observe.
Which of the following has the lowest entropy?
A: H2O(I)
B: H2O(s)
C: H2O(g)
D: O2(g)
Answer: Option (B) is the correct answer.
Explanation:
Entropy is defined as the degree of disorder or randomness. This means that when particles of a matter move rapidly and continuously from one place to another then this shows entropy of the matter is high.
For example, particles of a gas are weakly held and hence, they rapidly collide and show high entropy.
Whereas in solids, particles are held together by strong intermolecular forces of attraction. Thus, they are not moving and hence in solids entropy is the lowest.
Thus, we can conclude that out of the given options, [tex]H_{2}O(s)[/tex] has the lowest entropy.
The correct answer is H2O(s) - Ice. Entropy is a measure of disorder in a system. The lowest entropy is found in solids because their particles are closely packed and have a fixed arrangement.
The correct answer is B: H2O(s) - Ice
Entropy is a measure of the disorder or randomness of a system. The state of matter with the lowest entropy is a solid because the particles are closely packed and have a fixed arrangement.
For example, in the case of water, H2O(s) or ice has the lowest entropy because the water molecules are arranged in a regular lattice structure. In comparison, H2O(g) or water vapor has a higher entropy because the water molecules are spread apart and have greater freedom of movement.
Hence, among the given options, H2O(s) has the lowest entropy.
Learn more about Entropy here:
https://brainly.com/question/33413760
#SPJ6
Which of the structure below represents fat
Answer:
yea
Explanation:
What is the general trend in atomic size within a group? Within a period?
The atomic size along period in periodic table decreases whereas down a group, the atomic size increases due to the addition of more energy levels.
What is atomic size?The atomic size is considered to be the distance from the nucleus to the valence shell of the atom. The size of an atom depends on the nuclear charge, number of electrons and number of shells.
Along a period, the atomic size is decreasing this is because, the nuclear charge is increasing with an increase in atomic number and no increase in number of shell. Thus, electrons are occupying within the same energy level and experience more nuclear attractive pull results in smaller size.
Down a group the number of principal shell increases Thus the valence electrons are getting far apart from the nucleus and the valence electrons are more screened by the inner electrons. Therefore, the atomic size increases.
Find more on atomic size, refer here:
https://brainly.com/question/1127028
#SPJ3
Help with Standard Enthalpy Change Calculation?
Calculate the standard enthalpy change of the reaction ClO(g) + O3(g) ---> ClO2(g) = 02(g)
Standard enthalpies are: ClO(g) is 101; for O3 is 142.3; for O2 is 0; for O(g), is 247.5.
The standard enthalpy change of the reaction ClO(g) + O₃(g) -> ClO₂(g) + O₂(g) is -243.3 kJ/mol. This is calculated by subtracting the sum of the standard enthalpies of formation of reactants from products.
To calculate the standard enthalpy change [tex](\( \Delta H^\circ \))[/tex] of the reaction, we need to use the standard enthalpies of formation [tex](\( \Delta H_f^\circ \))[/tex] for each substance involved in the reaction.
Given:
- [tex]\( \Delta H_f^\circ \) for ClO(g) = 101 kJ/mol[/tex]
- [tex]\( \Delta H_f^\circ \) for O3(g) = 142.3 kJ/mol[/tex]
- [tex]\( \Delta H_f^\circ \) for O2(g) = 0 kJ/mol[/tex]
- [tex]\( \Delta H_f^\circ \) for O(g) = 247.5 kJ/mol[/tex]
The reaction can be rewritten as:
[tex]\[ \text{ClO}(g) + \text{O}_3(g) \rightarrow \text{ClO}_2(g) + \text{O}_2(g) \][/tex]
Now, we calculate the overall change in enthalpy:
[tex]\[ \Delta H^\circ = \sum \Delta H_f^\circ (\text{products}) - \sum \Delta H_f^\circ (\text{reactants}) \][/tex]
[tex]\[ \Delta H^\circ = (\Delta H_f^\circ (\text{ClO}_2) + \Delta H_f^\circ (\text{O}_2)) - (\Delta H_f^\circ (\text{ClO}) + \Delta H_f^\circ (\text{O}_3)) \][/tex]
Substituting the values:
[tex]\[ \Delta H^\circ = ((0 + 0) - (101 + 142.3)) \, \text{kJ/mol} \][/tex]
[tex]\[ \Delta H^\circ = (-243.3) \, \text{kJ/mol} \][/tex]
Therefore, the standard enthalpy change of the reaction is -243.3 kJ/mol.
The atom that contains only one electron in the highest occupied energy sublevel
Explanation:
The highest occupied energy sub-level is defined as number of electrons present in the outermost energy level of an atom.
For example, for alkali metals general electronic configuration is [tex]ns^{1}[/tex].
This means that in the highest occupied energy sub-level of an alkali metal there will be only one electron.
Whereas for alkaline earth metals general electronic configuration is [tex]ns^{2}[/tex]. This means there are 2 electrons present in the highest occupied energy sub-level of an alkaline earth metal.
Thus, we can conclude that atom that contains only one electron in the highest occupied energy sublevel are alkali metals.
Which of the following atoms would gain two electrons to fill its valence energy level?
A. Ca
B. Br
C. S
D. B
What one characteristic of an atom determines what type of element it is?
the number of neutrons.
the number of protons.
the mass number.
the atomic mass.
Answer:
the number of protons.
Explanation:
The number of protons is also the atomic number that the element has in the periodic table, no element has the same number of protons than any other, and if an atom changes the number of protons in its nucleus it changes the element it is. This gives the atom its characteristics, and its position in the periodic table, this also dictates the type of element that that atom is.
A single atom of lithium can combine with a single atom of iodine to create electron energy stability for both atoms. True or false? ...?
Answer:
The answer is: TRUE
Explanation:
Hello!
Let's solve this!
This is true, since the Lithium atom has a valence number of +1, this means an electron to yield.
For its part, the iodine has valence number -1, this means a place to accept electrons.
When joined they make a perfect combination where it has high electronic stability.
We conclude that the answer is: TRUE
#1: Which of the following is a property of an ionic compound?
A. soft
B. malleable
C. low boiling point
D. high melting point
Which is the noble gas notation for chlorine?
A-[Ne] 4s2 4p5
B-[Ne] 3s2 3p5
C-[Ne] 3s2 3p3
D-[Ne] 3p2 3p5
Answer: The electronic configuration of Chlorine will be [tex][Ne]3s^23p^5[/tex]
Explanation: Chlorine is an element which belongs to the P-block of the periodic table. Its atomic number is 17.
Atomic Number = Number of electrons
Number of electrons = 17
The nearest noble gas which lies to Chlorine is Neon which has 10 electrons. Rest of the 7 electrons are filled in the 3s and 3p orbitals. Hence, the electronic configuration of Chlorine is
[tex][Cl]=[Ne]3s^23p^5[/tex]
Answer:
B. [tex][Ne] 3s^23p^5[/tex]
Explanation:
Chlorine is the element of group 17 and third period. The atomic number of chlorine is 17 and the symbol of the element is Cl.
The electronic configuration of the element chlorine is:-
[tex]1s^22s^22p^63s^23p^5[/tex]
Noble gas notation includes a shorthand way of writing the electronic configuration of the elements.
The nearest noble gas - Neon which has electronic configuration of - [tex]1s^22s^22p^6[/tex]
So, the noble gas notation for chlorine is:- [tex][Ne] 3s^23p^5[/tex]
What is the molecular weight of Mn2Se7
The molecular weight of Mn2Se7 = 662.1grams /mol
Molecular weight of a molecule:The molecular weight of molecule is calculated using the periodic table to find out the atomic weight of each atom times the number of atoms present.
Therefore, atomic weight of Mn= 54.9 × 2 = 109.8g
Se = 78.9 × 7 = 552.3g
109.8g + 552.3g = 662.1g/ mol
Therefore the molecular weight = 662.1grams /mol
Learn more about molecular weight here:
https://brainly.com/question/24727597
What is the ratio of Al3+ ions to S2- ions in a neutral compound?
A. 1:1
B 2:1
C.2:3
D. 3:2
Answer:
c
Explanation:
One of the few xenon compounds that form is cesium xenon heptafluoride (CsXeF7). How many moles of CsXeF7 can be produced from the reaction of 11.0 mol cesium fluoride with 11.5 mol xenon hexafluoride?
CsF(s) + XeF6(s) CsXeF7(s) ...?
The maximum amount of cesium xenon heptafluoride (CsXeF7) that can be produced from the reaction of 11.0 mol cesium fluoride with 11.5 mol xenon hexafluoride is 11.0 moles, as cesium fluoride is the limiting reagent.
Explanation:To determine how many moles of cesium xenon heptafluoride (CsXeF7) can be produced from the reaction of 11.0 mol cesium fluoride with 11.5 mol xenon hexafluoride, we must first write a balanced chemical equation for the reaction:
CsF + XeF6 → CsXeF7
From this equation, we can see that the reaction is a 1:1 molar ratio between cesium fluoride (CsF) and xenon hexafluoride (XeF6).
Given that 11.0 moles of cesium fluoride and 11.5 moles of xenon hexafluoride are available, cesium fluoride is the limiting reagent since we have less of it. Thus, it will determine the maximum amount of CsXeF7 that can be formed.
Therefore, theoretically, 11.0 moles of CsXeF7 can be produced from the available reactants.
Final answer:
The maximum number of moles of CsXeF₇ that can be produced is 11.0 moles, as cesium fluoride (CsF) is the limiting reagent in the reaction.
Explanation:
The student is asking how many moles of cesium xenon heptafluoride (CsXeF₇) can be produced from the reaction of 11.0 mol cesium fluoride (CsF) with 11.5 mol xenon hexafluoride (XeF₆). The reaction is written as:
CsF(s) + XeF₆(s) → CsXeF₇(s)
To answer this question, we need to determine which reactant is the limiting reagent, because that reactant will dictate the maximum amount of product that can be formed. In this reaction, each mole of CsF reacts with one mole of XeF₆ to form one mole of CsXeF₇. Since we have 11.0 moles of CsF and 11.5 moles of XeF₆, CsF is the limiting reagent.
Therefore, the maximum amount of CsXeF₇ that can be formed is equal to the amount of limiting reagent, which is 11.0 moles.