The amount of fossil fuel that can be

There is amount of 1.67 grams of glucose in 100 ml of the final solution.

To solve this problem, use the concept of dilution.

The number of moles of a solute remains constant when diluted,

[tex]\[M_1V_1 = M_2V_2\][/tex]

1. Initial concentration is the mass of glucose divided by the volume of the solution in the flask (100 ml):

[tex]\[M_1 = \frac{18.5 \, \text{g}}{100 \, \text{ml}} = 0.185 \, \text{g/ml}\][/tex]

2. Initial volume  is 100 ml.

3. Final volume is 0.500 L

4. Now use the formula to find the final concentration

[tex]\[M_2 = \frac{M_1 \cdot V_1}{V_2} = \frac{0.185 \, \text{g/ml} \cdot 45.0 \, \text{ml}}{0.500 \, \text{L}}\][/tex]

      = 0.0167 g/ml

This is the concentration of glucose in the diluted solution.

5. Finally, to find the mass of glucose in 100 ml of the final solution, multiply the concentration  by the volume (100 ml):

[tex]\[ \text{Mass of glucose} = M_2 \cdot V_2 = 0.0167 \, \text{g/ml} \cdot 100 \, \text{ml}\][/tex]

[tex]\[ \text{Mass of glucose} \approx 1.67 \, \text{g}\][/tex]

So, there are 1.67 grams of glucose in 100 ml of the final solution.

Learn more about Solution here:

https://brainly.com/question/1616939

#SPJ12

The mass of glucose in 100 mL of the final solution is 41.11 g.

To calculate the concentration of glucose in the final solution, we need to first find the concentration of the glucose solution.

Given:

We can use the formula for concentration:

Concentration (in g/L) = (mass of solute in grams) / (volume of solution in liters)

Substituting the given values:

Concentration of the glucose solution = 18.5 g / 0.045 L

= 411.11 g/L

Now, we can use the concentration of the glucose solution to find the mass of glucose in 100 mL of the final solution.

Given:

We can use the same formula for concentration:

Concentration (in g/L) = (mass of solute in grams) / (volume of solution in liters)

Substituting the given values:

Mass of glucose in 100 mL of the final solution = (Concentration of the glucose solution) * (Volume of the final solution in liters)

Mass of glucose in 100 mL of the final solution = 411.11 g/L * 0.100 L

= 41.11 g

Learn more about calculating the concentration of a solute in a solution here:

https://brainly.com/question/15458177

#SPJ14                          

Final answer:

The initial mole fraction of hydrogen gas was 2/3, based on the stoichiometry of the reaction N₂ + 3 H₂→ 2 NH₃ and the available information that nitrogen's mole fraction remains constant, which indicates hydrogen was limiting.

Explanation:

The student is asking about a reaction where an unspecified ratio of nitrogen gas  and hydrogen gas are mixed to form ammonia (NH3). The reaction in question is represented by the balanced chemical equation:

N₂ + 3 H₂→ 2 NH₃. Given that the initial and final mole fractions of nitrogen are the same, the initial mole fraction of hydrogen can be determined by considering mole ratios from the balanced equation.

According to the balanced chemical equation, 1 mole of nitrogen reacts with 3 moles of hydrogen to produce 2 moles of ammonia. If we start with 3 moles of nitrogen, as per the stoichiometry, we would need 9 moles of hydrogen (3 times the required amount) for complete reaction. However, the question tells us that only 6 moles of hydrogen were present initially, which is not sufficient to react with all the nitrogen. As a result, after the reaction, 1 mole of nitrogen will be left unreacted, and 4 moles of ammonia will be produced (since the actual hydrogen present is twice the amount required for 2 moles of ammonia, as per the balanced equation).

The initial mole fraction of hydrogen can be calculated by its initial moles relative to the total initial moles. If there were 3 moles of nitrogen and 6 moles of hydrogen initially, there were a total of 9 moles. The initial mole fraction of hydrogen would be 6/9, or 2/3.

The combustion of ethanol produces water and carbon dioxide. Given the mass of ethanol and water produced in the experiment, the percent yield of H2O can be calculated as the ratio of actual yield to theoretical yield multiplied by 100%, which is 34.1%.

The question is about calculating the percent yield of H2O from the combustion of ethanol (C2H5OH). The balanced chemical equation for the combustion of ethanol is C2H5OH + 3O2 -> 2CO2 + 3H2O. The total volume of ethanol burned is 4.61 ml, and its density is 0.789 g/ml, hence the mass is 4.61 ml x 0.789 g/ml = 3.634 g. According to the stoichiometric ratio, 1 mol of ethanol can form 3 mol of water. In the experiment, 3.72 ml of water (which is 3.72 g because the density of water is 1g/ml) was collected. Thus, the theoretical yield is 3.634 g x 3 = 10.902 g, and the percent yield of H2O is the actual yield/theoretical yield x100% = 3.72 g/10.902 g x 100% = 34.1%.

https://brainly.com/question/36893978

#SPJ3

The percent yield of water from the combustion of ethanol is calculated as approximately 87.32%. This involves determining the theoretical yield based on the balanced chemical equation and comparing it with the actual yield collected.

To determine the percent yield of water from the combustion of ethanol, follow these steps:

The balanced chemical equation for the combustion of ethanol ([tex]C_2H_5OH[/tex]) is:

[tex]C_2H_5OH (l) + 3O_2 (g) \rightarrow 2CO_2 (g) + 3H_2O (l)[/tex]

Find the moles of ethanol: Given 4.61 mL of ethanol with a density of 0.789 g/mL, mass of ethanol = 4.61 mL × 0.789 g/mL = 3.635 g.

Calculate moles of ethanol: Using the molar mass of ethanol ([tex]C_2H_5OH[/tex], which is 46.07 g/mol), moles of ethanol = 3.635 g / 46.07 g/mol ≈ 0.0789 mol.

Convert moles of ethanol to moles of water: From the balanced equation, 1 mole of ethanol produces 3 moles of water. Therefore, moles of water = 0.0789 mol × 3 = 0.2367 mol.

Convert moles of water to grams of water: Using the molar mass of water (which is 18.02 g/mol), mass of water (theoretical) = 0.2367 mol × 18.02 g/mol ≈ 4.26 g.

Convert grams of water to mL, assuming the density of water is 1.00 g/mL (since 1 g of water = 1 mL), the volume = 4.26 mL.

Actual yield of water collected is 3.72 mL.

Percent yield = (actual yield / theoretical yield) × 100 = (3.72 mL / 4.26 mL) × 100 ≈ 87.32%.

The most likely to be the pH of a salt that is formed by the reaction of a strong acid and a weak base is A. 2.0

When a strong acid reacts with a weak base, the resulting salt solution is weakly acidic with a pH around 5.

Thus, the value most likely representing the pH of the salt formed by the reaction of a strong acid and a weak base is: 2.0, 7.0, 8.0, or 10.0 is 2.0.

Correct question is: Which value is most likely to be the pH of a salt that is formed by the reaction of a strong acid and a weak base?
A. 2.0
B. 7.0
C. 8.0
D. 10.0

Answer: Gravity

Explanation:

Mass movement or mass wasting can be define as the movement of the particles, sediments, soil, regolith, rocks stones, boulder and other unstable materials down the slope under the influence of gravity. This is responsible for causing major disasters such as mudslides and landslides. The type of mass movement includes slides, flows, creep, falls and topples.

Answer: The ions present in a given solution of silver nitrate are [tex]Ag^+,NO_3^-[/tex]

Explanation:

Silver nitrate is a strong electrolyte because it displaces into its ions in aqueous solution.

The chemical reaction for the ionization of silver nitrate solution follows the equation:

[tex]AgNO_3(aq.)\rightarrow Ag^+(aq.)+NO_3^-(aq.)[/tex]

By Stoichiometry of the reaction:

1 mole of silver nitrate solution ionizes into 1 mole of silver ions and 1 mole of nitrate ions.

Hence, the ions present in a given solution of silver nitrate are [tex]Ag^+,NO_3^-[/tex]

The chemical formula is[tex]\boxed{{\text{A}}{{\text{g}}^ + }{\text{,N}}{{\text{O}}_{\text{3}}}^ - }[/tex].

The phases of ions are[tex]\boxed{{\text{aqeuous phase}}}[/tex].

Further explanation:

Ionic compound:

Ionic compounds are those compounds formed from the ions of the species. Ions are the species that are formed due to the loss or gain of electrons. Cation forms by the loss of electrons and anion forms by the gain of electrons in a neutral atom.

Some of the properties of ionic compounds are as follows:

1. These are hard solids.

2. They have high melting and boiling points.

3. They are considered as good conductors of heat and electricity.

Ionic reaction:

Ionic reaction is a type of chemical reaction in which molecules in aqueous solution dissociate to form ions. In ionic reaction, the net charge is same on both sides.

[tex]{\text{AgN}}{{\text{O}}_{\text{3}}}[/tex]is a strong electrolyte and dissociates into ions in the aqueous solution. The reaction for dissociation of [tex]{\text{AgN}}{{\text{O}}_{\text{3}}}[/tex] solution is:

[tex]{\text{AgN}}{{\text{O}}_{\text{3}}}\left({aq}\right)\to{\text{A}}{{\text{g}}^+}\left({aq}\right)+{\text{N}}{{\text{O}}_{\text{3}}}^-\left({aq}\right)[/tex]

In this reaction, 1 mole of [tex]{\text{AgN}}{{\text{O}}_{\text{3}}}[/tex] dissociates to form 1 mole of [tex]{\text{A}}{{\text{g}}^+}[/tex] and 1 mole of [tex]{\text{N}}{{\text{O}}_{\text{3}}}^-[/tex].

Therefore, ions present in the solution of silver nitrate are [tex]{\text{A}}{{\text{g}}^+}[/tex], [tex]{\text{N}}{{\text{O}}_{\text{3}}}^-[/tex]. As ions are formed in solution only, so the phase of both the ions is aqueous phase.

Learn more:

1. Draw Lewis structure of ionic compound https://brainly.com/question/6786947.

2. Identify the neutral element https://brainly.com/question/9616334

Answer details:

Grade: High School

Subject: Chemistry

Chapter: Chemical compound

Keywords: Ionic compound, aqueous solution, good conductor, high enthalpy, ions, dissociates, AgNO3, Ag+ and NO3-.

Answer: Option (A) is the correct answer.

Explanation:

It is know that each element consists of three sub-atomic particles. These are protons, neutrons and electrons.

Inside the nucleus of an atom, there will be only protons and neutrons. Whereas electrons revolve around the nucleus of an atom.

Protons have a positive charge, neutrons have no charge and electrons have a negative charge.

Therefore, we can conclude that electrons are the subatomic particles which are found in the space surrounding an atoms nucleus.

Electrons are the subatomic particles found in the space surrounding an atom's nucleus.

The subatomic particles found in the space surrounding an atom's nucleus are electrons. Electrons are negatively charged particles that move around the nucleus in specific energy levels or orbitals. They are attracted to the positively charged protons in the nucleus, creating a balanced electrical charge within an atom. Neutrons and protons are located within the nucleus of an atom, rather than in the space surrounding it.

https://brainly.com/question/32192242

#SPJ6

Answer: A.) 0.029

Explanation: To calculate the moles, we use the equation:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\textMolar mass}}[/tex]

For sodium:

Mass of sucrose given = 10 g

Molar mass of sucrose [tex]C_{12}H_{22}O_{11}[/tex] = 342 g/mol

Putting values in above equation, we get:

[tex]\text{Moles of sodium}=\frac{10g}{342g/mol}=0.029mol[/tex]

Thus the number of moles of sucrose available for this reaction will be 0.029.

Answer:  L2/L1=1.5

Explanation:

Not my work but heres the way the answer is obtained cause the other guy was totally incorrect

Write the expression to calculate the moment of inertia of the meter stick about second axis of rotation. I 2 = M L 2 12 + M ( x 1 − x 2 ) 2

Substitute the values in the above expression. I 2 = M ( 1 m ) 2 12 + M ( 0.5 m − 0.3 m ) 2 I 2 = M 12 + 0.04 M I 2 = 1.48 M 12

. . . . . . ( i i ) Divide expression (ii) by expression (i):

I 2 I 1 = 1.48 M 12 M 12 = 1.48 ≃ 1.5

The ratio of the moment of inertia through the second axis (30-cm mark) to the moment of inertia through the first axis (50-cm midpoint) is 7/3. This calculation uses the parallel-axis theorem.

The question deals with the moment of inertia of a slender uniform rod rotated around two different axes perpendicular to the rod, where one passes through the rod's midpoint, and the other through a point that is not the midpoint. To find the ratio of moments of inertia about these two axes, we can use the parallel-axis theorem, which states that the moment of inertia I about any axis parallel to and a distance d from the center of mass axis is I = Icm + Md2, where Icm is the moment of inertia about the center of mass and M is the mass of the rod.

For the first axis, which passes through the 50-cm mark, the moment of inertia is I50 = ML2/12, because it is the midpoint of the rod (center of mass). For the second axis, which passes through the 30-cm mark, we apply the parallel-axis theorem to find I30 = I50 + M(0.22), because the distance d from the center of mass (50 cm) to the 30-cm mark is 20 cm or 0.2 m. Thus, the ratio I30 / I50 is (ML2/12 + M(0.2)2) / (ML2/12), which simplifies to 1 + 4/3 = 7/3. Therefore, the moment of inertia of the rod about the axis through the 30-cm mark is 7/3 times greater than the moment of inertia about the 50-cm mark.

                Option-D :  The ionic compound has a high melting point.

                         Ionic compounds are made up of positive ions called cations and negative ions called as anions. Cations are formed when an atom or group of atoms looses one or more electrons while, anion is formed when an atom or group of atoms gains electrons.

                         The two opposite ions formed interact through electrostatic interactions and form one of the strongest intramolecular bonding called ionic bonding. It requires very high energy to separate these ions from each other in solid form.

Examples: Melting Point of NaCl  =  801 °C

                  Melting Point of MgCl₂  =  714 °C

                  Melting Point of CaCO₃  =  825 °C

_______________________________________________________

               Option-A :  The arrangement of bonded atoms.

                         Structural formula is the graphical representation of of a chemical formula in either two dimensional or three dimensional space. It helps in depicting the arrangement of atoms or group of atoms in a compound or molecule.

Examples:

                Below the attached figure shows the structural formula of Glucose with Chemical formula C₆H₁₂O₆, Sulfuric Acid with Chemical formula H₂SO₄ and Water with Chemical formula H₂O respectively.

1. [tex]\boxed{{\mathbf{Option}}{\text{ }}{\mathbf{d}}}[/tex] is the correct option for first problem that says ionic compounds have high boiling point as well as high melting point.  

2. [tex]\boxed{{\mathbf{Option}}{\text{ }}{\mathbf{a}}}[/tex] is the correct option for second problem that says structural formula shows arrangement of the bonded atoms.

Further Explanation:

1. Ionic compounds:

Ionic compounds are made up of ions where ions are charged particle formed when an atom gained or lost one or more than one electrons.

When a metal loses 1 or more than 1 electron then it becomes positively charged ion known as a cation.  

When a non-metal atom gains 1 or more than 1 electron then it becomes negatively charged ion known as an anion.

Properties of ionic compounds:

1. They form a crystal lattice instead of amorphous solid .

2. They are hard in nature.

3. They have high boiling point as well as high melting point. For example, NaCl has a melting point of [tex]800.7{\text{ }}^\circ {\text{C}}[/tex] and boiling point of [tex]1465{\text{ }}^\circ {\text{C}}[/tex]

Covalent compound:

When a compound is formed with the sharing of electrons between the atoms of different elements then it known as covalent compound.

Properties of covalent compounds:

1. They are relatively more flammable than ionic compound.

2. They are do not conduct electricity on dissolving into water.

3. They have relatively low boiling point as well as low melting point.

So, option D is correct.

2. Structural formula:

The structural formula of any molecule shows the relative connections and location of atoms. The structural formula uses symbols to show the atoms and pair of dots or a line to show the bonds between the atoms. Structural formula depicts the arrangement of atoms bonded to form the molecule.

For example: In [tex]{{\text{H}}_2}{\text{O}}[/tex], two hydrogen atoms bonded with one oxygen atom are present. Therefore, to represent the structure formula of [tex]{{\text{H}}_2}{\text{O}}[/tex] oxygen is placed between two hydrogen atoms and two O-H bonds are shown by the line or two dots.

Therefore, option A is correct.

Learn more:

1. Number of covalent bonds does nitrogen formed with its unpaired: https://brainly.com/question/5974553

2. Identify the polarity of the bonds and the overall polarity: https://brainly.com/question/2615067

Answer details:

Grade: High School

Subject: Chemistry

Chapter: Covalent bonding and molecular structure

Keywords: ionic, covalent compound, ionic compound, solids, melting point, boiling point, arrangement of atoms, bonded atoms.

The major product formed when y is heated with Br2 is 1,2-dibromo compound.

When y is heated with Br2, the major product formed is 1,2-dibromo compound. This is because Br2 adds across an alkene in an anti-addition manner, resulting in the formation of a vicinal dihalide. The reaction proceeds via a bromonium ion intermediate.

For example, when ethene (y) is heated with Br2, the major product formed is 1,2-dibromoethane. The reaction can be represented by the following equation:

CH2=CH2 + Br2 → CH2BrCH2Br

The width (y) of the NFL field is 53 1/3 yards, and the area (a) is 6399 1/3 square yards, using a length (x) of 120 yards.

The regulation NFL playing field is a rectangle. If the length is x and the width is y, the perimeter of the rectangle is represented as 2(x+y) which equals 346 2/3 or 1040/3 yards according to your question.

Given the standard dimensions of an NFL field, the length x is 360ft (120 yards) and the width y is 160ft (53 1/3 yards). Now we approach this problem using this knowledge.

To find the width y, we can rearrange the formula: y = 1040/6 - x/2. Substituting x = 120 yards into this equation, we find that y = 53 1/3 yards.

The area of the rectangle (field), represented by a, is found by multiplying the length by the width (x*y). Therefore, the area is a = 120 * 53 1/3 = 6399 1/3 square yards.

https://brainly.com/question/28667387

#SPJ12

Answer:

The correct answer is: D. copper

Explanation:

Copper is a chemical element that belongs to the group 11 and period 4 of the periodic table. It is a d-block element that has atomic number 29. Copper is a pinkish-orange colored metal that has high conductivity.

It readily oxidizes when exposed to atmospheric oxygen to form a greenish-blue layer of copper carbonate. This layer is known as verdigris or patina.

biogeochemical cycles

An atom with sp hybridization has two regions of electron density that can form bonds. Therefore, the maximum number of sigma bonds that can be formed by an atom with sp hybridization is two.

When an atom in a molecule undergoes sp hybridization, it implies that the atom has two regions of valence electron density which can form bonds. In the case of an atom with sp hybridization, it can form a maximum of two σ (sigma) bonds. For instance, in the acetylene molecule (H-C≡C-H), the two carbon atoms utilize one of their sp hybrid orbitals to form a sigma bond with each other and their remaining sp hybrid orbitals to form sigma bonds with hydrogen atoms.

The formation of these bonds can be understood better when analysing hybrid atomic orbitals. These orbitals are mathematical combinations of some or all of the valence atomic orbitals, which describe the electron density around atoms that are bonded covalently. The two unhybridized p orbitals per carbon atom in acetylene have a side-by-side overlap and hence form two π (pi) bonds, giving rise to the triple bond between the two carbon atoms.

https://brainly.com/question/30198266

#SPJ12

An atom with sp hybridization can form a maximum of 2 sigma bonds due to the 180-degree orientation of the two sp hybrid orbitals. The remaining unhybridized p orbitals can form pi bonds. This configuration is commonly observed in molecules with linear geometry.

If an atom has sp hybridization in a molecule, it means that one s orbital and one p orbital have combined to form two sp hybrid orbitals. These sp orbitals are oriented 180 degrees apart, resulting in a linear geometry. Therefore, the maximum number of σ bonds (sigma bonds) that the atom can form is 2. The remaining two unhybridized p orbitals can form π bonds (pi bonds), commonly seen in triple bonds, as exemplified in acetylene (C₂H₂).

Final answer:

Removing the lid from a separatory funnel after extraction allows air to enter, replaces the displaced liquid to avoid negative pressure, releases built-up pressure for safety, and prevents re-mixing of the layers for a cleaner separation.

Explanation:

There are several reasons why it is a good idea to remove the lid from the separatory funnel after each extraction. Firstly, removing the stopper allows air to enter and replace the displaced liquid, preventing the formation of negative pressure inside the funnel, which could hinder the proper drainage of liquids. Secondly, when solutions are mixed, pressure may build up inside the separatory funnel, and venting by opening the stopcock releases this pressure, making the process safer and preventing potential hazards. Lastly, keeping the funnel open minimizes the risk of re-mixing the layers as each layer can be separated cleanly without the liquid touching the stem of the funnel if the layers are undisturbed.

Answer:

In the central nervous system, about 90 percent of the cells are glia. Originally, the glia was considered to be passive cells, that is, which only functions to support the nerve cells physically, thus, the term glia is used, which means glue.  

However, the glia plays an essential function in various homeostatic procedures and also at the time of development. The four prime kinds of glia prevail, that is, oligodendrocytes, astrocytes, microglia, and ependymal cells. The glial cells are also known as the supporting cells of the nervous system.  

The prime functions of glial cells are to provide oxygen and nutrients to the neurons, to envelope neurons and hold them in position, to eradicate and remove the carcasses of the dead neurons, and to insulate one neuron from another.  

Answer:

In the central nervous system, about 90 percent of the cells are glia. Originally, the glia was considered to be passive cells, that is, which only functions to support the nerve cells physically, thus, the term glia is used, which means glue.  

However, the glia plays an essential function in various homeostatic procedures and also at the time of development. The four prime kinds of glia prevail, that is, oligodendrocytes, astrocytes, microglia, and ependymal cells. The glial cells are also known as the supporting cells of the nervous system.  

The prime functions of glial cells are to provide oxygen and nutrients to the neurons, to envelope neurons and hold them in position, to eradicate and remove the carcasses of the dead neurons, and to insulate one neuron from another.  

Explanation:

Answer: The correct answer is "current".

Explanation:

The electric shock happens when the circuit is complete with respect to ground. In this case, the electric current enters from one point through the conductor and exits from the another point.

In case of bird sitting on the electrical wire of the electric pole, it does not get electric shock as the circuit is not complete with respect to the ground. That is why the electric current does not flow through its body.

Therefore, an electrical shock happens when electric current enters the body at one point and leaves through another.

An electrical shock happens when electric [tex]\boxed{\text{current}}[/tex] enters the body at one point and leaves through another.

Further Explanation:

The rate of flow of electric charges is known as electric current. It is generally represented by I. It passes through the substances that carry current carriers in them. The electrons are said to be the current carriers. Electrons are the negatively charged subatomic particles which along with the atomic nucleus comprise the atom. The SI unit of electric current is Ampere or Coulomb per second. One Ampere is defined as the rate of flow of one-coulomb charge in unit time. The instrument used to measure electric current is called ammeter.

The formula to calculate the electric current is as follows:

[tex]{\text{I}} = \dfrac{{\text{Q}}}{{\text{t}}}[/tex]  

Here,

I is the electric current.

Q is the amount of charge in Coulomb.

t is the time in seconds.

Conductors are the substances that permit electric current to flow through them. Metals are good conductors of heat and electricity as these have free charge carriers that move randomly and produce current. Insulators are the substances that cannot pass an electric current through them. Non-metals are bad conductors or insulators.

When an electric current passes through the human body, an electric shock is felt. It can results in skin burns, numbness, breathing problems, headache and muscle spasms. The severity of electric shock depends on the amount of electric current, time to which the body is subjected to current and the path of current through the body.

Learn More:

Answer Details:

Grade: Middle School

Chapter: Electric current

Subject: Chemistry

Keywords: electric current, electric shock, electrons, charge carriers, ampere, coulomb, time, I, Q, t, conductors, metals, insulators, non-metals.

Harry started with [tex]\boxed{{\text{5}}{\text{.5 grams}}}[/tex] of  [tex]{\text{KAl}}{\left( {{\text{S}}{{\text{O}}_{\text{4}}}} \right)_{\text{2}}} \cdot{\text{12}}{{\text{H}}_{\text{2}}}{\text{O}}[/tex] hydrated salt.

Further explanation:

Mole is the measure of the amount of substance. Mole is the relation between the mass of the substance and molar mass of a substance. It is defined as the mass of a substance in grams divided by its molar mass (g/mol).

The expression to calculate the number of moles is as follows:

[tex]{\text{Number of moles}}\;=\;\dfrac{{{\text{Given mass}}\left({\text{g}}\right)}}{{{\text{molar mass}}\left({{\text{g/mol}}}\right)}}[/tex]

Therefore, the formula to calculate the mass of the given compound is,

[tex]{\text{Mass}}\left({\text{g}} \right)=\left({{\text{Number of moles}}}\right)\left( {{\text{molar mass}}\left({{\text{g/mol}}}\right)}\right)[/tex]

The molar mass of  [tex]{\text{KAl}}{\left( {{\text{S}}{{\text{O}}_{\text{4}}}} \right)_{\text{2}}} \cdot{\text{12}}{{\text{H}}_{\text{2}}}{\text{O}}[/tex] is 474.3884g/mol.

The molar mass of  [tex]{\text{KAl}}{\left({{\text{S}}{{\text{O}}_{\text{4}}}}\right)_{\text{2}}}[/tex] is 258.2050 g/mol.

Therefore, mass of 12[tex]{{\text{H}}_2}{\text{O}}[/tex]  molecules is,

[tex]\begin{aligned}{\text{Mass}}\left( {\text{g}} \right)&={\text{Moles}}\times{\text{molar mass of }{{\text{H}}_2}{\text{O}}\\&=12{\text{ mol }}\times 18{\text{ g/mol }}\\&=216{\text{ g}}\\\end{aligned}[/tex]

Since initially in [tex]{\text{KAl}}{\left( {{\text{S}}{{\text{O}}_{\text{4}}}} \right)_{\text{2}}} \cdot{\text{12}}{{\text{H}}_{\text{2}}}{\text{O}}[/tex] , 1 mole of   [tex]{\text{KAl}}{\left({{\text{S}}{{\text{O}}_{\text{4}}}}\right)_{\text{2}}}[/tex] contained 12 moles of [tex]{{\text{H}}_2}{\text{O}}[/tex] . Thus 258.2050 g of [tex]{\text{KAl}}{\left({{\text{S}}{{\text{O}}_{\text{4}}}}\right)_{\text{2}}}[/tex] should contains 216 g of [tex]{{\text{H}}_2}{\text{O}}[/tex] before evaporation.

Therefore, the mass of [tex]{{\text{H}}_2}{\text{O}}[/tex] contained by 1 g of   [tex]{\text{KAl}}{\left({{\text{S}}{{\text{O}}_{\text{4}}}}\right)_{\text{2}}}[/tex] is calculated as,

[tex]{\text{Mass}}\left({\text{g}}\right){\text{ of }}{{\text{H}}_2}{\text{O in 1 g of KAl}}{\left( {{\text{S}}{{\text{O}}_{\text{4}}}} \right)_{\text{2}}}{\text{ }}=\dfrac{{{\text{216 g of }}{{\text{H}}_2}{\text{O}}}}{{258.2050{\text{ g of KAl}}{{\left({{\text{S}}{{\text{O}}_{\text{4}}}} \right)}_{\text{2}}}}}[/tex]

Therefore, the mass of [tex]{{\text{H}}_2}{\text{O}}[/tex] contained by 3.0 g of   [tex]{\text{KAl}}{\left({{\text{S}}{{\text{O}}_{\text{4}}}}\right)_{\text{2}}}[/tex] is calculated as follows:

[tex]\begin{aligned}{\text{Mass}}\left({\text{g}} \right){\text{ of }}{{\text{H}}_2}{\text{O in 3 g of KAl}}{\left({{\text{S}}{{\text{O}}_{\text{4}}}}\right)_{\text{2}}}&=\dfrac{{{\text{216 g of }}{{\text{H}}_2}{\text{O}}}}{{258.2050{\text{ g of KAl}}{{\left( {{\text{S}}{{\text{O}}_{\text{4}}}}\right)}_{\text{2}}}}}\times 3{\text{ g of KAl}}{\left({{\text{S}}{{\text{O}}_{\text{4}}}}\right)_{\text{2}}}\\&=2.50{\text{ g }}\\\end{aligned}[/tex]

This 2.5 g is the mass of water that is evaporated from hydrated salt.

The total mass of hydrated of [tex]{\text{KAl}}{\left( {{\text{S}}{{\text{O}}_{\text{4}}}} \right)_{\text{2}}} \cdot{\text{12}}{{\text{H}}_{\text{2}}}{\text{O}}[/tex] taken initially by harry is the sum of the mass of water that is evaporated and mass of dehydrated salt that is left after evaporation process.

[tex]\begin{aligned}{\text{Total mass of hydrated salt}}&={{\text{m}}_{{\text{KAl}}{{\left( {{\text{S}}{{\text{O}}_{\text{4}}}}\right)}_{\text{2}}}}}+{{\text{m}}_{{{\text{H}}_2}{\text{O evaporated}}}}\\&=3.0{\text{ g}}+{\text{2}}{\text{.5 g}}\\&=5.5{\text{ g }}\\\end{aligned}[/tex]

Learn more:

1. Determine the number grams of solute in 500 ml of 0.189 M KOH.: https://brainly.com/question/2847466

2. Rank the gases in decreasing order of effusion:https://brainly.com/question/1946297

Answer details:

Grade: Senior school

Subject: Chemistry

Chapter: Mole concept

Keywords: harry, hydrate salt, KAl(SO4)2•12H2O, dehydration process, hydration process, anhydrated salt, KAl(SO4)2, 3.0 gram KAl(SO4)2, grams of start with, 5.5 g.

Quenching in chemiluminescence is a process where other substances prevent or diminish light emission from an excited molecule, which can be dynamic (collision-based) or static (complex formation). This quenching can be a drawback or used to control the light output for various applications.

Quenching in chemiluminescence refers to the process by which a substance interferes with the emission of light from a chemically excited molecule. Although the excited state may be formed efficiently in a reaction, it can be quenched by other molecules, meaning these molecules reduce or prevent the emission of light.

The excited molecule loses energy either by emitting a photon, resulting in light (luminescence), or by transferring its energy non-radiatively to a quencher molecule. When quenching dominates over photon emission, it can diminish the overall light output, making the chemiluminescent reaction hard to detect.

There are two types of quenching: dynamic quenching and static quenching. Dynamic quenching occurs due to the collision of the excited state molecule with a quenching agent and is described by the Stern-Volmer equation. Static quenching, on the other hand, involves the formation of a non-emissive complex between the fluorophore and the quencher in the ground state. A quenching substance may be deliberately added to a chemiluminescent system to either increase fluorescence or phosphorescence efficiency after energy transfer, or to reduce the light emission to a more desirable level for certain applications.

Furthermore, phenomena like aggregation-caused quenching (ACQ) and aggregated-induced emission (AIE) are important in understanding the luminescent behavior of compounds. ACQ is the quenching effect due to aggregation of chromophores while AIE refers to an increase in luminescence as a result of aggregation, which can be useful in solid-state devices.

Final answer:

To prepare a 1.00 M solution from concentrated 98.0 wt% H2SO4, mix 130.4 mL of the acid with water up to 1.000 L. The density of this concentrated sulfuric acid is approximately 1.801 g/mL.

Explanation:

The question involves two distinct parts: (a) calculating the amount of a 98.0 wt% H2SO4 solution required to dilute it to a 1.00 M solution, and (b) determining the density of the concentrated sulfuric acid solution. When diluting a concentrated solution to a specified molarity, To dilute 98.0 wt% H2SO4 to 1.00 M, mix 130.4 mL of the concentrated acid with water. This process involves using the molarity formula and considering the initial concentration of the solution. For calculating the density, understanding that the 98.0 wt% H2SO4 solution means 98 g of H2SO4 is in 100 g of the solution. Given this, with additional calculations and known properties of the solution, the density of 98.0 wt% H2SO4 is around 1.801 g/mL.

(a) Volume of concentrated H₂SO₄ required is 55.6 mL.

(b) Density of 98.0 wt% H₂SO₄ is 1,803.70 g/L

To solve the problems regarding sulfuric acid (H₂SO₄), follow these steps:

(a) Volume of Reagent Required

Calculate the molar mass of H₂SO₄:

[tex]\[ \text{Molar mass of H}_2\text{SO}_4 = 2 \times 1.008 + 32.07 + 4 \times 16.00 = 98.09 \, \text{g/mol} \][/tex]

Determine the amount of H₂SO₄ in 1 liter of 1.00 M solution:

[tex]\[ \text{Moles of H}_2\text{SO}_4 = 1.00 \, \text{M} \times 1.000 \, \text{L} = 1.00 \, \text{mol} \][/tex]

[tex]\[ \text{Mass of H}_2\text{SO}_4 = 1.00 \, \text{mol} \times 98.09 \, \text{g/mol} = 98.09 \, \text{g} \][/tex]

Calculate the volume of 18.0 M H₂SO₄ required to obtain 98.09 grams of H₂SO₄:

[tex]\[ \text{Moles of H}_2\text{SO}_4 \text{ in the concentrated solution} = 18.0 \, \text{M} \][/tex]

[tex]\[ \text{Volume of concentrated solution} = \frac{\text{Moles of H}_2\text{SO}_4}{\text{Concentration}} = \frac{98.09 \, \text{g}}{98.09 \, \text{g/mol}} = 1.00 \, \text{mol} \][/tex]

[tex]\[ \text{Volume} = \frac{1.00 \, \text{mol}}{18.0 \, \text{M}} = 0.0556 \, \text{L} = 55.6 \, \text{mL} \][/tex]

(b) Density of 98.0 wt% H₂SO₄

Determine the mass of H₂SO₄ in 1 liter of solution:

From the molarity and density calculation:

[tex]\[ \text{Molarity (M)} = 18.0 \, \text{mol/L} \][/tex]

[tex]\[ \text{Mass of H}_2\text{SO}_4 = 18.0 \, \text{mol} \times 98.09 \, \text{g/mol} = 1,765.62 \, \text{g} \][/tex]

Calculate the total mass of the solution:

Since the solution is 98.0 wt% H₂SO₄:

[tex]\[ \text{Mass percentage} = \frac{\text{Mass of H}_2\text{SO}_4}{\text{Total mass of solution}} \times 100\% \][/tex]

[tex]\[ 98.0\% = \frac{1,765.62 \, \text{g}}{\text{Total mass}} \times 100\% \][/tex]

[tex]\[ \text{Total mass} = \frac{1,765.62 \, \text{g}}{0.980} = 1,803.70 \, \text{g} \][/tex]

Calculate the density of the solution:

[tex]\[ \text{Density} = \frac{\text{Total mass}}{\text{Volume}} = \frac{1,803.70 \, \text{g}}{1.00 \, \text{L}} = 1,803.70 \, \text{g/L} \][/tex]

The question is asking for the number of moles of benzoic acid and sodium bicarbonate, and whether the given quantity of sodium bicarbonate is enough to react with all of the benzoic acid. Without additional information, a detailed calculation is not possible. However, an example has been provided for clarity.

Unfortunately, insufficient information has been provided to determine the number of moles of benzoic acid in your experiment. To make this calculation, we would need to know either the mass and molar mass of benzoic acid or, if it is in solution, the volume and molarity. Similarly, for the sodium bicarbonate, while you've given a 10% solution, we also need the density of the solution for the accurate calculation.

After the moles of benzoic acid and sodium bicarbonate are calculated, the stoichiometry of the reaction would be needed to assess whether there is sufficient sodium bicarbonate to react with all of the benzoic acid. Typically, one mole of bicarbonate reacts with one mole of acid.

As an example, say we have 2 grams of benzoic acid (C7H6O2). The molar mass of benzoic acid is about 122.12 g/mol. Therefore, there would be approximately 0.016 moles of benzoic acid (2 grams divided by 122.12 g/mol). If we have more than 0.016 moles of sodium bicarbonate, then it is sufficient.

https://brainly.com/question/8732513

#SPJ12

Answer : The volume in gallons will be [tex]1.3\times 10^3\text{ gallons}[/tex]

Explanation :

The conversion used volume from liters to gallons is :

1 gallon = 3.78541 L

or,

[tex]1\text{ liter}=\frac{1}{3.78541}\text{ gallon}[/tex]

As we are given that the lung capacity of the blue whale is 5100 L. Now we have to convert the volume into gallons.

As, [tex]1\text{ liter}=\frac{1}{3.78541}\text{ gallon}[/tex]

So, [tex]5100\text{ liter}=\frac{5100\text{ liter}}{1\text{ liter}}\frac{1}{3.78541}\text{ gallon}=1.3\times 10^3\text{ gallons}[/tex]

Therefore, the volume in gallons will be [tex]1.3\times 10^3\text{ gallons}[/tex]