Suppose you have two capacitors and want to use them to store the maximum amount of energy by connecting them across a voltage source. You should connect them

Answers

Answer 1

Answer:

Connect them in parallel

Explanation:

The energy stored by two capacitors connected to the same voltage source is given by

[tex]U=\frac{1}{2}C_T V^2[/tex]

where

[tex]C_T[/tex] is the total capacitance of the two capacitors

V is the voltage of the source

In order to maximize the energy stored U, we need to maximize [tex]C_T[/tex]. We have:

- In parallel, the total capacitance is given by the sum of the individual capacitances:

[tex]C_T(p) = C_1 + C_2[/tex]

- In series, the total capacitance is given by:

[tex]C_T(s)=\frac{1}{\frac{1}{C_1}+\frac{1}{C_2}}[/tex]

Comparing the two equations, we notice that [tex]C_T(p)>C_T(s)[/tex], so the parallel configuration is the one that maximizes the energy stored.

Answer 2

Final answer:

To store the maximum amount of energy, capacitors should be connected in parallel as this configuration allows each capacitor to experience the same voltage as the source, maximizing the total stored charge and energy.

Explanation:

If you wish to store the maximum amount of energy in capacitors when connecting them across a voltage source, you should connect them in parallel. In a parallel configuration, each capacitor experiences the same voltage as the source. This setup ensures that the total capacitance is the sum of the individual capacitances, thus allowing for the storage of a maximum amount of energy. Capacitors in parallel have the advantage of maintaining the voltage across each capacitor equal to the source voltage, leading to a higher total charge stored in the system. Conversely, capacitors in series have a reduced total capacitance, as the voltage divides among them, making parallel connection the better choice for maximizing energy storage.


Related Questions

What causes different colors to appear in the sky?

Answer : the scattering and reflection of light by dust particles

Answers

The sky appears blue because the blue wavelength of light from the sun is scattered more by the air molecules that the other colors. The sky appears with a red hue at dawn and sunsets because the red spectrum is able to pass through the longer atmosphere in the oblique angle while blue light is scattered well before.  

Answer: the scattering and reflection of light by dust particles

Explanation:

Una esfera homogénea de radio r y peso W resbala en un piso bajo la acción de una fuerza horizontal constante P aplicada a una cuerda, como se muestra en la Fig. 1. (a) Demostrar que, si ? es el coeficiente de rozamiento entre la esfera y el piso, la altura h está dada por h = r (1 – ?W/P). (b) Demostrar que la esfera no se encuentra en equilibrio de traslación bajo estas circunstancias. (c) Si se escoge un valor diferente de h, ?se puede lograr que la esfera se encuentre tanto en equilibrio de rotación como de traslación? ?Y si se escoge una dirección diferente para P? Dar una explicación de lo que ocurre.

Answers

Garlic Butter Shrimp Scampi can be enjoyed as an appetizer/light meal OR for dinner with your favourite pasta of choice! You can also keep it low carb and serve over zucchini noodles or with steamed cauliflower! Either way it’s delicious and even better than an Italian restaurant Scampi!

Natalia is studying a wave produced in her magnetics lab. This wave can move through the empty space in a vacuum and carries a lot of energy.

Answers

What is your question

Answer:

You forgot to put the question it's asking but its Gamma ray

Explanation:

Natalia is studying a wave produced in her magnetics lab. This wave can move through the empty space in a vacuum and carries a lot of energy.

What wave is Natalia most likely studying?

Gamma ray is the answer

could i possibly have a brainlist pwease

Each croquet ball in a set has a mass of 0.53 kg. The green ball, traveling at 14.4 m/s, strikes the blue ball, which is at rest. Assuming that the balls slide on a frictionless surface and all collisions are head-on, find the final speed of the blue ball in each of the following situations: a) The green ball stops moving after it strikes the blue ball. Answer in units of m/s.b) The green ball continues moving after the collision at 2.4 m/s in the same direction. Answer in units of m/s. c) The green ball continues moving after the collision at 0.9 m/s in the same direction. Answer in units of m/s.

Answers

a) 14.4 m/s

The problem can be solved by using the law of conservation of total momentum; in  fact, the total initial momentum must be equal to the final total momentum:

[tex]p_i = p_f[/tex]

So we have:

[tex]m_g u_g + m_b u_b = m_g v_g + m_b v_b[/tex] (1)

where

[tex]m_b = m_g = m = 0.53 kg[/tex] is the mass of each ball

[tex]u_g = 14.4 m/s[/tex] is the initial velocity of the green ball

[tex]u_b = 0[/tex] is the initial velocity of the blue ball

[tex]v_g=0[/tex] is the final velocity of the green ball

[tex]v_b[/tex] is the final velocity of the blue ball

Simplifying the mass in the equation and solving for [tex]v_b[/tex], we find

[tex]v_b = u_g = 14.4 m/s[/tex]

b) 12.0 m/s

This time, the green ball continues moving after the collision at

[tex]v_g = 2.4 m/s[/tex]

So the equation (1) becomes

[tex]u_g = v_g + v_b[/tex]

And solving for [tex]v_b[/tex] we find

[tex]v_b = u_g - v_g = 14.4 m/s-2.4 m/s=12.0 m/s[/tex]

c) 13.5 m/s

This time, the green ball continues moving after the collision at

[tex]v_g = 0.9 m/s[/tex]

So the equation (1) becomes

[tex]u_g = v_g + v_b[/tex]

And solving for [tex]v_b[/tex] we find

[tex]v_b = u_g - v_g = 14.4 m/s-0.9 m/s=13.5 m/s[/tex]

Final answer:

To find the final speeds of the blue ball after the green ball collides with it, the conservation of momentum principle is used, considering the green ball's various final speeds post-collision for each situation. The final speeds of the blue ball are 14.4 m/s, 12.0 m/s, and 13.5 m/s, respectively.

Explanation:

The problem involves conservation of momentum during collisions, as the surface is considered frictionless, and energy is conserved during perfectly inelastic collisions (although the question does not specify if the collisions are perfectly elastic or inelastic).

To solve for the final speed of the blue ball in each given situation, we'll apply the principle of conservation of momentum, which states that the total momentum before the collision is equal to the total momentum after the collision.

Calculating the Final Speeds

When the green ball stops: Conservation of momentum implies that the momentum of the green ball before the collision is transferred entirely to the blue ball. Therefore, the blue ball's final speed will be the same as the initial speed of the green ball, i.e., 14.4 m/s.When the green ball continues at 2.4 m/s: The momentum lost by the green ball is gained by the blue ball. By conserving momentum, the final speed of the blue ball can be found and is calculated to be 12.0 m/s.When the green ball continues at 0.9 m/s: Again, by conserving momentum, the final speed of the blue ball is calculated to be 13.5 m/s.

Based on the second law of thermodynamics, how would you expect a system to change over time?
A.It would become more organized
B.Its randomness would increase
C.It would become more efficient
D.Its energy would increase

Answers

Answer: B. Its randomness would increase

Explanation:

According to the second law of thermodynamics:  

"The amount of entropy in the universe tends to increase over time"

That is, in any cyclic process, entropy will increase, or remain the same.

 

So, in this context, entropy is a thermodynamic quantity defined as a criterion to predict the evolution or transformation of thermodynamic systems. In addition, it is used to measure the degree of organization of a system.  

In other words: Entropy is the measure of the disorder (or randomness) of a system and is a function of state.

While at the county fair, you decide to ride the Ferris wheel. Having eaten too many candy apples and elephant ears, you find the motion somewhat unpleasant. To take your mind off your stomach, you wonder about the motion of the ride. You estimate the radius of the big wheel to be 15 m, and you use your watch to find that each loop around takes 25 s. What are your speed and magnitude of your acceleration? What is the ratio of your apparent weight to your true weight at the top of the ride? What is the ratio of your apparent weight to your true weight at the bottom?

Answers

ahhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh this confused mee

A certain atom has 26 protons, 26 electrons, and 30 neutrons. It mass number is?

Answers

The most common atom of iron has 26 protons and 30 neutrons in its nucleus. What are its atomic number, atomic mass, and number of electrons if it is electrically neutral? This atom has atomic number 26, atomic mass 56, and has 26 electrons.

Answer :The mass number is 56.

Explanation:

Mass number is defined as the sum of number of protons and neutrons that are present in an atom.

Mass number = Number of protons + Number of neutrons = 26+ 30 =56

Atomic number is defined as the number of protons or number of electrons that are present in an atom.

Atomic number = Number of electrons = Number of protons = 26

Hence, neutrons and protons affects the mass number and thus the mass number will be 56.

The magnetic field lines of a bar magnet spread out from the north end to the south end. South end to the north end. Edges to the center. Center to the edges.

Answers

Answer;

the north end to the south end.

Explanation;Magnetic field lines from a bar magnet form lines that are closed. The direction of magnetic field is taken to be outward from the North pole of the magnet and in to the South pole of the magnet. A magnetic field refers to  the area surrounding a magnet where a force is exerted on certain objects. These lines are spread out of the north end of the magnet.The magnetic field lines resemble a bubble.

Answer

the answer is option A/ "north end to the south end"

Explanation:

Based on the second law of thermodynamics why must a machine always be less than 100% efficient?
A.Heat never moves from cold to hot.
B.Heat is never converted completely into mechanical energy.
C.Heat never flows from hot to cold.
D.Entropy never increases.

Answers

Answer: B.Heat is never converted completely into mechanical energy.

Explanation:

According to the second principle of thermodynamics:  

"The amount of entropy in the universe tends to increase over time"

However the first formulation of this law (by Sadi Carnot) states:

"There is an upper limit to the efficiency of conversion of heat to work, in a heat engine "

This means the heat cannot be completely transformed into mechanical energy in a machine. That is why a machine's effieciency is always less than 100%

Answer:

B

Explanation:

Use logic

An object is placed a distance of twice the focal length away from a diverging lens. What is the magnification of the image?

Answers

Answer:

1/3

Explanation:

We can solve the problem by using the lens equation:

[tex]\frac{1}{f}=\frac{1}{p}+\frac{1}{q}[/tex]

where

f is the focal length

p is the distance of the object from the lens

q is the distance of the image from the lens

Here we have a divering lens, so the focal length must be taken as negative (-f). Moreover, we know that the object is placed at a distance of twice the focal length, so

[tex]p=2f[/tex]

So we can find q from the equation:

[tex]\frac{1}{q}=\frac{1}{(-f)}-\frac{1}{p}=-\frac{1}{f}-\frac{1}{2f}=-\frac{3}{2f}\\q=-\frac{2}{3}f[/tex]

Now we can find the magnification of the image, given by:

[tex]M=-\frac{q}{p}=-\frac{-\frac{2}{3}f}{2f}=\frac{1}{3}[/tex]

Tarzan swings on a 30.0-m-long vine initially inclined at an angle of 37 degrees measured from vertical. What is his speed at the bottom of the swings if he starts from rest?

Answers

Final answer:

Using the principle of conservation of energy, we can determine that Tarzan's speed at the bottom of his swing is 21.7 m/s.

Explanation:

The physics problem you have revolves around concepts of kinematics, potential energy and kinetic energy. The total energy in a closed system is conserved. Tarzan's potential energy, when he's at the top of his swing, gets converted to kinetic energy when he is at the bottom of his swing. This fundamental principle is due to the law of conservation of energy.

We can use the potential energy to solve for Tarzan's speed at the bottom of the swing. Tarzan's height, h, at the top of the swing can be found from the equation for the length of the vine and cos(37 degrees) - h = 30m * cos(37), which gives 23.9m. Initially, the total energy is just potential energy, E = m * g * h, and finally just kinetic energy, K = 1/2 * m * v^2.

Equating these two (E=K) gives us m * g * h = 1/2 * m * v^2. The mass cancels and we solve for the speed, v = sqrt(2 * g * h). Using 9.8 m/s^2 for g and 23.9m for h, we can find that v = 21.7 m/s. So Tarzan's speed at the bottom of his swing is 21.7 m/s.

Learn more about conservation of energy here:

https://brainly.com/question/13345660

#SPJ12

Final answer:

Tarzan's speed at the bottom of his swing, given a vine length of 30 m and swing angle of 37 degrees, would be roughly 9.4 m/s. This calculation is based on the principles of conservation of energy and pendulum motion in physics.

Explanation:

The subject of this question deals with the concepts of physics, specifically pertaining to pendulum motion and the conservation of energy. Tarzan's speed at the bottom of his swing can be calculated using potential and kinetic energy principles.

When Tarzan is at the top of his swing, all of his energy is gravitational potential energy. As he swings downwards, this potential energy transfers to kinetic energy, which is the energy of movement. The total energy in the system remains constant due to conservation of energy.

The equation we'll use to find Tarzan's speed comes from setting the gravitational potential energy equal to the kinetic energy at the bottom of his swing, thus: mgh = 1/2 * m * v^2. Here, 'm' is the mass (which actually cancels out), 'h' is the height fallen, 'g' is acceleration due to gravity, and 'v' is the speed we want to find. As Tarzan starts at rest, his potential energy is mgh where h = L(1 – cosθ).  We substitute this height into the previous expression solved for speed to get:

v = sqrt(2gh) = sqrt[2 * (9.8 m/s²) * L(1 – cosθ)]. For a vine length L = 30.0 m and swing angle θ = 37 degrees, we find v = sqrt[2 * (9.8 m/s²) * (30m *(1 – cos37°))] ≈ 9.4 m/s.

Learn more about Physics: Conservation of Energy and Pendulum Motion here:

https://brainly.com/question/16624499

#SPJ2

A hollow steel ball weighing 4 pounds is suspended from a spring. This stretches the spring 17 feet. The ball is started in motion from the equilibrium position with a downward velocity of 4 feet per second. The air resistance (in pounds) of the moving ball numerically equals 4 times its velocity (in feet per second) . Suppose that after t seconds the ball is y feet below its rest position. Find y in terms of t. (Note that the positive direction is down.) Take as the gravitational acceleration 32 feet per second per second.

Answers

Final answer:

To find the position of the ball, y, in terms of time, t, we need to consider the forces acting on the ball. The weight of the ball and the force due to air resistance act in opposite directions. By using Newton's second law and integrating the velocity function, we can determine the position function of the ball.Therefore, the position of the ball, y, in terms of time, t, is given by y(t) = -(gt²)/2

Explanation:

To find the position of the ball, y, in terms of time, t, we need to consider the forces acting on the ball. The weight of the ball, mg, and the force due to air resistance, 4v, act in opposite directions. The net force can be calculated using Newton's second law, F = ma.

Using the equation F = ma, we have mg - 4v = ma. Rearranging the equation to solve for v, we get v = (mg - ma)/4. Substitute the given values of m = 0.096 kg, g = 9.8 m/s², and a = 0.075 m/s²into the equation to find v. Then, integrate the velocity function to find the position function y(t).

After solving the integration, we get y(t) = -(gt²)/2 + C, where C is the constant of integration. To find the value of C, we can use the initial condition y(0) = 0. Substituting the values, we find C = 0.

Therefore, the position of the ball, y, in terms of time, t, is given by y(t) = -(gt²)/2

To solve using one of the kinematic equations a person must know how many of the variables in the equation?

Answers

Since the kinematic equations include four variables, you only need to know three of the variables to solve for the unknown. Therefore you answer is 3.

To solve using one of the kinematic equations a person must know the value of three variables.

The Equation of Kinematics shown below,

                            [tex]v=u+at\\ \\ s=ut+\frac{1}{2}at^{2} \\ \\ v^{2}=u^{2}+2as [/tex]

Where u is initial velocity, v is final velocity, a is acceleration and t is time , s  is distance.

From observing above equations, there are 4 variables present in all equation.

Hence, To solve using one of the kinematic equations a person must know the value of three variables.

Learn more:

https://brainly.com/question/11298125

If the kinetic and potential energy in a system are equal, then the potential energy increases

Answers

Answer: less

Explanation:

An electron travels with speed 6.0 106m/s between the two parallel charged plates shown in the figure. The plates are separated by 1.0 cm and are charged by a200 V battery.What magnetic field strength will allow the electron to pass between the plates without being deflected?

Answers

Answer:

3.3 mT

Explanation:

First of all, we need to find the strength of the electric field between the two parallel plates.

We have:

[tex]\Delta V=200 V[/tex] (potential difference between the two plates)

[tex]d=1.0 cm=0.01 m[/tex] (distance between the plates)

So, the electric field is given by

[tex]E=\frac{\Delta V}{d}=\frac{200 V}{0.01 m}=2\cdot 10^4 V/m[/tex]

Now we want the electron to pass between the plates without being deflected; this means that the electric force and the magnetic force on the electron must be equal:

[tex]F_E = F_B\\qE=qvB[/tex]

where

q is the electron charge

E is the electric field strength

v is the electron's speed

B is the magnetic field strength

In this case, we know the speed of the electron: [tex]v=6.0\cdot 10^6 m/s[/tex], so we can solve the formula to find B, the magnetic field strength:

[tex]B=\frac{E}{v}=\frac{2\cdot 10^4 V/m}{6.0\cdot 10^6 m/s}=0.0033 T=3.3 mT[/tex]

The magnetic field strength will allow the electron to pass between the plates without being deflected is 0.0033 T.

Electric field strength

The electric field strength of the electron is calculated as follows;

E = V/d

E = 200/(0.01)

E = 20,000 V/m

Magnetic field strength

The magnetic field strength is related to electric field in the following formula;

qvB = qE

vB = E

B = E/v

B = (20,000)/(6 x 10⁶)

B = 0.0033 T

Thus, the magnetic field strength will allow the electron to pass between the plates without being deflected is 0.0033 T.

Learn more about magnetic field here: https://brainly.com/question/7802337

Part 1: A rope has one end tied to a vertical support. You hold the other end so that the rope is horizontal. If you move the end of the rope back and forth with a frequency of 4 Hz, the transverse wave you produce has a wavelength of 0.5 m. What is the speed of the wave in the rope?a. 0.13 m/sb. 8 m/sc. 2 m/sd. 4 m/sPart 2: A rope with a mass density of 1 kg/m has one end tied to a vertical support. You hold the other end so that the rope is horizontal and has a tension of 4 N. If you move the end of the rope back and forth, you produce a transverse wave in the rope with a wave speed of 2 m/s. If you double the amount of tension you exert on the rope, what is the wave speed?a. 2.8 m/sb. 1.0 m/sc. 2.0 m/sd. 0.25 m/se. 4.0 m/s

Answers

1) c. 2 m/s

Explanation:

The relationship between frequency, wavelength and speed of a wave is

[tex]v=\lambda f[/tex]

where

v is the speed

[tex]\lambda[/tex] is the wavelength

f is the frequency

For the wave in this problem,

f = 4 Hz

[tex]\lambda=0.5 m[/tex]

So, the speed is

[tex]v=(0.5 m)(4 Hz)=2 m/s[/tex]

2)  a. 2.8 m/s

The speed of the wave on a string is given

[tex]v=\sqrt{\frac{T}{\mu}}[/tex]

where

T is the tension in the string

[tex]\mu[/tex] is the linear mass density

In this problem, we have:

[tex]T=2 \cdot 4 N=8 N[/tex] (final tension in the rope, which is twice the initial tension)

[tex]\mu = 1 kg/m[/tex] --> mass density of the rope

Substituting into the formula, we find

[tex]v=\sqrt{\frac{8 N}{1 kg/m}}=2.8 m/s[/tex]

Marshall determines that a gas has a gage pressure of 276 kPa. What's the absolute pressure of this gas?

Answers

Answer:

377 kPa

Explanation:

The absolute pressure of a gas is given by the sum of its gauge pressure and the atmospheric pressure:

[tex]p=p_0 + p_g[/tex]

where

[tex]p_0 = 101 kPa[/tex] is the atmospheric pressure

[tex]p_g[/tex] is the gauge pressure of the gas

In this problem, the gauge pressure of the gas is [tex]p_g = 276 kPa[/tex]. Therefore, the absolute pressure is

[tex]p=101 kPa+276 kPa=377 kPa[/tex]

A freight train rolls along a track with considerable momentum. If it rolls at the same speed but hastwice as much mass, its momentum is
a. zero.b. doubled.c. quadrupled.d. unchanged.

Answers

Answer:

b. doubled

Explanation:

The momentum of an object is given by

[tex]p=mv[/tex]

where

m is the object's mass

v is its velocity

We see that the momentum is directly proportional to mass. Therefore if the speed of the object is unchanged, but the mass is doubled: m' = 2m, the new momentum will be

[tex]p'=m' v=(2m v)=2 (mv) = 2 p[/tex]

so the momentum is doubled.

How does friction with the atmosphere affect the speed of an artificial satellite

Answers

Atmospheric friction causes an artificial satellite to lose kinetic energy and spiral inward, leading to an increase in its orbital speed due to conservation of angular momentum and stronger gravitational pull at lower altitudes.

Friction with the atmosphere affects the speed of an artificial satellite by causing it to lose energy and gradually spiral inward towards Earth. As a satellite encounters atmospheric drag, it slows down, converting its kinetic energy into heat. Despite this initial deceleration, the satellite's orbital speed actually increases as it gets closer to Earth due to conservation of angular momentum and the increase in gravitational force at lower altitudes.

The circular satellite velocity needed to maintain an orbit close to Earth's surface is approximately 8 kilometers per second, whereas the escape velocity from our planet is 11 kilometers per second. When an artificial satellite like the Apollo mission reentry capsule experiences friction, the air ahead of it is compressed and heated, causing the satellite to glow red hot and lose speed.

However, this is also connected to the principles of gravitation, as demonstrated by the satellite's acceleration inward. This is analogous to an elastic string attached to a whirling stone which shortens due to air friction, causing the stone to spiral inward. Thus, as friction with our atmosphere causes a satellite to descend closer to Earth, the gravitational pull becomes stronger and the satellite's orbital speed increases, even though its total energy is decreasing because of atmospheric drag.

Water thtat is returned to the environment after secondary treatment is known as _____.

Answers

The answer is C) Effluent

A capacitor is connected to an AC generator. As the generator's frequency is increased, what happens to the current in the capacitor? A)The current increases B)The current decreases C)The current does not change.

Answers

Answer:

A) The current increases

Explanation:

In the DC limit (that means, very low frequency of the generator), the capacitor acts as an open circuit. In fact, a capacitor consists of two parallel plates which are separated from each other: this means that the current cannot flow through it, but it can only flow through the rest of the circuit.

In the case of a direct current (DC), therefore, the current in the circuit must be zero. For an AC current with very low frequency, the current is still very low, because the polarity of the generator changes direction not very often, so there is still enough time for the capacitor to "block" the current. However, when the frequency of the generator is increased, the polarity changes so fast that the current in the circuit can flow without having time of "hitting" the capacitor, so it has almost no effect and the current in the circuit is maximum.

A force that pushes or pulls is known as A. A reaction force. B. An expected force. C. A positive force. D. An applied force.

Answers

I believe it’s D, an applied force.

A reaction force seems to refer to Newton’s third law, but is relatively vague to be the answer to this question.

An expected force isn’t a concept nor the name of any subject of forces that is taught within the physics textbooks.

A positive force refers to direction, a negative force can have less, equal, or even more magnitude than the positive force, thus it contradicts itself. As that’s still a force that can push or pull.

So I believe it to be D.

A force that pushes or pulls is known as an applied force. Option D is correct.

What is force?

Force is defined as an object in motion, and its rate of change of momentum is called force.

here,

A force applied to an object is one that is exerted on it by another object or by an external agent. This force can cause the object to accelerate or change direction. Pushing a book across a table, pulling a sled across the snow, or lifting a weight with a pulley are all examples of applied forces.

It is important to note that for every applied force, there is an equal and opposite reaction force, according to Newton's third law of motion. This means that when an object exerts a force on another object, the second object exerts an equal and opposite force back on the first object. This reaction force is also an applied force, and it can affect the motion of both objects involved.

Learn more about force here:

https://brainly.com/question/26115859

#SPJ6

What dictates how proteins are assembled in our body?

Answers

The body's main sources of energy are carbohydrate and fat. At times, protein can serve as an energy source in which the liver removes an amine group from the amino acid.
Final answer:

Proteins in our body are assembled according to the instructions encoded in our DNA. The sequence of amino acids dictates the structure and function of the protein.

Explanation:

Proteins in our body are assembled according to the instructions encoded in our DNA. Each gene in the DNA molecule codes for the specific order of amino acids that make up a protein. The sequence of amino acids dictates the structure and function of the protein. Scientists have determined the amino acid sequences and three-dimensional conformation of numerous proteins, providing important insights into how they perform their specific functions in the body.

Which of these binary systems is most likely to contain a black hole?A.An x-ray binary containing an O star and another object of equal massB.A binary with an X-ray bursterC. An X-ray binary containing a G star and another object of equal mass

Answers

Brain signals are converted

The binary system that is most likely to contain a black hole is option B, a binary with an X-ray burster.

What is a black hole?

Space-based black holes are areas where a tremendous amount of mass is crammed into a very small space. As a result, there is an intense gravitational force that prevents even light from escaping. They are produced when massive stars collapse, as well as possibly by other as-yet-unknown processes.

Black holes are believed to form from the collapse of massive stars, so a binary system containing a massive star is more likely to produce a black hole.

Option A describes an x-ray binary containing an O star and another object of equal mass. While O stars are massive and short-lived, it is unlikely that they would evolve into black holes in the short timescale of a binary system.

Option C describes an X-ray binary containing a G star and another object of equal mass. G stars are less massive than O stars, so they are even less likely to evolve into black holes.

Therefore, the binary system most likely to contain a black hole is option B, a binary with an X-ray burster.

Learn more about black holes here:

https://brainly.com/question/10597324

#SPJ6

What magnitude charge creates a 1.0 n/c electric field at a point 1.0 m away?

Answers

The magnitude charge creates a 1.0 n/c electric field at a point 1.0 m away 1.12×10⁻⁹ C.

The influence or force that a charged particle feels in the presence of other charged particles is described by the fundamental idea in physics known as an electric field. It is a force field that surrounds electric charges and fills the entire universe. Electric charges produce electric fields, which radiate outward in all directions from those charges.

Given:

Electric field, E = 1 N/C

Distance, d = 1 m

The electric field is given as:
E = (kQ)/r²

Q = (Er²)/k

Q = (1×1²)/(9×10⁹)

Q = 1.12×10⁻⁹ C.

Hence, the magnitude charge creates a 1.0 n/c electric field at a point 1.0 m away 1.12×10⁻⁹ C.

To learn more about the Electric field, here:

https://brainly.com/question/14058164

#SPJ12

It's best to start at a higher level when participating in competitive sports. Please select the best answer from the choices provided. T F

Answers

False- a total beginner to competitive sport should start at a lower level and work their way up

Answer: false

Explanation:

At the beginning level or novice level the player should involve in a sport at a lower level. This is because of the fact that if he starts at a higher level the player may have to perform responsibilities accordingly. The player at the higher level have to decide the strategy of the competitive sport which an experienced player can justify. But a beginner cannot take such responsibilities and the sports skills of such person may not be good.  

A 1.2 nf parallel-plate capacitor has an air gap between its plates. Its capacitance increases by 3.0 nf when the gap is filled by a dielectric
What is the dielectric constant of that dielectric?

Answers

Final answer:

The dielectric constant of the dielectric material is 3.5.

Explanation:

Given that the capacitance of the parallel-plate capacitor without the dielectric is 1.2 nF, and the capacitance increases by 3.0 nF when the gap is filled with the dielectric, we can find the dielectric constant using the equation:

C' = KC

Since the original capacitance is 1.2 nF and the increased capacitance is 1.2 + 3.0 = 4.2 nF, we can plug these values into the equation and solve for K:

KC = C'

K * 1.2 nF = 4.2 nF

K = 4.2 nF / 1.2 nF = 3.5

Therefore, the dielectric constant of the dielectric material is 3.5.

Learn more about Capacitance here:

https://brainly.com/question/31871398

#SPJ12

A skydiver is falling at constant velocity. If a force of 600 N is pulling down on the skydiver, how much force must be acting upward on the skydiver?

exactly 600 N
slightly more than 600 N
slightly less than 600 N
exactly 0 N

Answers

Well, if the skydiver is at constant velocity, than there’s no acceleration, as stated by Newton’s first law. Thus the total net force would equate to 0. In order to make this statement true, the answer would have to be exactly 600 N.

Force is defined as the product of mass and acceleration .it is a vector quantity. The force acting on the skydiver must be 600 N which should be acting upward.

what is force?

Force is defined as the action on any object that has the ability to change the shape, size, and direction of an object is in motion or in static condition.

It is a vector quantity defined as the product of mass and acceleration. Acceleration is the rate  change of velocity with respect to the time

Force is given by;

[tex]\rm {Force = Mass \times Acceleration}[/tex]

As the definition of acceleration if the velocity change is zero in that condition the force acting is zero. that's why force will also be zero

[tex]\rm {F +ma+mg =0 }[/tex]

If acceleration is zero in that condition

[tex]\rm {F =-mg }[/tex]

[tex]\rm {F = -600 N }[/tex]

where - ve shows the direction of force is negative

therefore a force of exactly 600 N is acting upward on the skydiver.

To learn more about the force refer to the link;

https://brainly.com/question/13523820

A _____ is a particle with a positive charge and the mass of an electron.

Answers

A positron, or an anti-electron, is a particle with a positive charge and the mass of an electron.

Doubling an objects speed will have what effect on its potential energy due to gravity

Answers

An object's gravitational potential energy is

(mass) x (gravity) x (height above ground) .

I don't see the object's speed anywhere in that formula, do you ?

An object's speed has no effect whatsoever on its potential energy ... only if it changes the object's height above ground.

Other Questions
What is the approximate mass of a 100-N person on Earth?Question options:1 kg10 kg100 kg1,000 kg Chappaquiddick Speech, 1969 Edward Kennedy My fellow citizens: 1I have requested this opportunity to talk to the people of Massachusetts about the tragedy which happened last Friday evening. This morning I entered a plea of guilty to the charge of leaving the scene of an accident. Prior to my appearance in court it would have been improper for me to comment on these matters. But tonight I am free to tell you what happened and to say what it means to me. 2On the weekend of July 18th, I was on Martha's Vineyard Island participating with my nephew, Joe Kennedy -- as for thirty years my family has participated -- in the annual Edgartown Sailing Regatta. Only reasons of health prevented my wife from accompanying me. 3On Chappaquiddick Island, off Martha's Vineyard, I attended, on Friday evening, July 18th, a cook-out I had encouraged and helped sponsor for a devoted group of Kennedy campaign secretaries. When I left the party, around 11:15pm, I was accompanied by one of these girls, Miss Mary Jo Kopechne. Mary Jo was one of the most devoted members of the staff of Senator Robert Kennedy. She worked for him for four years and was broken up over his death. For this reason, and because she was such a gentle, kind, and idealistic person, all of us tried to help her feel that she still had a home with the Kennedy family. 4There is no truth, no truth whatever, to the widely circulated suspicions of immoral conduct that have been leveled at my behavior and hers regarding that evening. There has never been a private relationship between us of any kind. I know of nothing in Mary Jo's conduct on that or any other occasion -- and the same is true of the other girls at that party -- that would lend any substance to such ugly speculation about their character. Nor was I driving under the influence of liquor. 5Little over one mile away, the car that I was driving on an unlit road went off a narrow bridge which had no guard rails and was built on a left angle to the road. The car overturned in a deep pond and immediately filled with water. I remember thinking as the cold water rushed in around my head that I was for certain drowning. Then water entered my lungs and I actual felt the sensation of drowning. But somehow I struggled to the surface alive. 6I made immediate and repeated efforts to save Mary Jo by diving into the strong and murky current, but succeeded only in increasing my state of utter exhaustion and alarm. My conduct and conversations during the next several hours, to the extent that I can remember them, make no sense to me at all. 7Although my doctors informed me that I suffered a cerebral concussion, as well as shock, I do not seek to escape responsibility for my actions by placing the blame either on the physical and emotional trauma brought on by the accident, or on anyone else. 8I regard as indefensible the fact that I did not report the accident to the police immediately. 9Instead of looking directly for a telephone after lying exhausted in the grass for an undetermined time, I walked back to the cottage where the party was being held and requested the help of two friends, my cousin, Joseph Gargan and Phil Markham, and directed them to return immediately to the scene with me -- this was sometime after midnight -- in order to undertake a new effort to dive down and locate Miss Kopechne. Their strenuous efforts, undertaken at some risk to their own lives, also proved futile. 10All kinds of scrambled thoughts -- all of them confused, some of them irrational, many of them which I cannot recall, and some of which I would not have seriously entertained under normal circumstances -- went through my mind during this period. They were reflected in the various inexplicable, inconsistent, and inconclusive things I said and did, including such questions as whether the girl might still be alive somewhere out of that immediate area, whether some awful curse did actually hang over all the Kennedys, whether there was some justifiable reason for me to doubt what had happened and to delay my report, whether somehow the awful weight of this incredible incident might in some way pass from my shoulders. I was overcome, I'm frank to say, by a jumble of emotions: grief, fear, doubt, exhaustion, panic, confusion, and shock. What phrase from the passage helps the reader infer the meaning of the word "substance"? A)"about the tragedy which happened last Friday evening" B)"and the same is true of the other girls at that party" C)"For this reason, and because she was such a gentle, kind, and idealistic person" D)"There is no truth, no truth whatever, to the widely circulated suspicions of immoral conduct" In a mixed market economy, property owned by the government O can be used by many citizens Who lead the house of representatives and house is this different from that of the leader of the Senate The dialectical method is a form of alternative dispute resolution.T/F summarize how the dna sequence directs the making of a protein What are the mechanisms by which aneuploidy and polyploidy are caused? What are the mechanisms by which aneuploidy and polyploidy are caused? The principal cause of aneuploidy is chromosome nondisjunction during mitosis or meiosis. Polyploidy in nature can result either from the duplication of euploid chromosome sets from a single species or from the combining of chromosome sets from different species. The principal cause of aneuploidy is paternal chromosome nondisjunction during meiosis. Polyploidy in nature results from the combining of chromosome sets from different species. The principal cause of aneuploidy is chromosome nondisjunction during mitosis. Polyploidy in nature can result from the deletion of one chromosome set during meiosis or during the first mitotic division. The principal cause of aneuploidy is maternal chromosome nondisjunction during meiosis. Polyploidy in nature results from the deletion of one chromosome set in somatic cells. Which transformation of Figure A results in Figure A'?a reflection across the y-axisa reflection across the x-axisa clockwise rotation of 270 about the origina translation of 4 units right What is the quotient? What media sparked racial violence in the early 1900sTelevision Magazines NewspapersRadio In a fish tank, the number of orange fish is 1 1/4 times the number of blue fish. Drag blue fish to represent the number of blue fish in the tank for every 5 orange fish whish sentence is correct You have a fancy 2nd-floor room and need a new mattress. You need to bring your mattress in through the french doors on your balcony. Your french doors of the dimensions of 72 inches by 80 inches. What is the largest mattress that can fit diagonally? Round to the nearest tenth. A patient has an infected puncture wound to her foot. Which type of white blood cell would you expect to be elevated in a differential white cell count? Thomas Jefferson organized his argument in the body of the Declaration of Independence by listing what? 1. Iraq invaded Kuwait over a dispute about __________ "stolen" oil previous wars foreign alliances "illegal" immigration1.Iraq invaded Kuwait over a dispute about __________ "stolen" oil previous wars foreign alliances "illegal" immigration2.Which of these did NOT take place during the conflict? economic penalties against Iraq an environmental disaster thousands of US deaths liberation of Kuwait3.With regards to Operation Desert Storm, it can be said that the United States __________. acted without world approval worked with Coalition forces failed in its overall mission captured and killed Saddam Hussein 2. Which of these did NOT take place during the conflict? economic penalties against Iraq an environmental disaster thousands of US deaths liberation of Kuwait economic penalties against Iraq an environmental disaster thousands of US deaths liberation of Kuwait3. With regards to Operation Desert Storm, it can be said that the United States __________. acted without world approval worked with Coalition forces failed in its overall mission captured and killed Saddam Hussein Jorge traveled 5 miles to school. After school, he traveled 1 mile to the Boys and Girls club and then traveled 6 miles back home. What was the distance of Jorges trip? A. 0 miles B. 5 miles C. 11 miles D. 12 miles Scientists believe a gigantic meteorite struck the Earth just before the dinosaurs went extinct. What could have caused the extinction of the dinosaurs?climate changechanges in Earths orbitforest firesimpact injuries Use factoring to solve for all the solutions of the quadratic equation. x^2 + 25=0x=5ix=-5ix=+/-5x=+/-5i If the mass of the earth and all objects on it were suddenly doubled, but the size remained the same, the acceleration due to gravity at the surface would becomeA) 1/2 of what it now is.B) 2 times what it now is.C) 1/4 of what it now is.D) the same as it now is.E) 4 times what it now is. Steam Workshop Downloader