A. what are the implied charges on the ions in mg2o3?
Suppose that we have an element A with a charge “a+”, and element B with a charge “b-”. The chemical reaction would be:
A(a+) + B(b-) --> AbBa
So in this case, we can see that:
Mg has a charge of 3+ while O has a charge of 2-.
B. do these charges agree with those expected from trends in the periodic table
From the periodic table, we can see that Mg should only have a charge of 2+ and not 3+.
This might mean that Mg can take different oxidation states.
what is the role of rRNA during translation
Final answer:
Ribosomal RNA (rRNA) is crucial for aligning mRNA and ribosomes during protein synthesis and catalyzing the formation of peptide bonds between amino acids. It is a key component of the ribosome, which directs the assembly of protein molecules. Transfer RNA (tRNA) assists by delivering the correct amino acids for incorporation into the protein.
Explanation:
Role of Ribosomal RNA (rRNA) during Translation
Ribosomal RNA (rRNA) plays a critical role during the process of translation, which is the synthesis of proteins in the cells. rRNA is a major component of ribosomes, which are the cellular structures where translation occurs. The rRNA ensures the correct alignment of mRNA and the ribosomes, which is essential for the decoding of the mRNA sequence into a polypeptide chain. Furthermore, rRNA has enzymatic activity and catalyzes the formation of peptide bonds between aligned amino acids, which is a pivotal step in the creation of a protein.
Transfer RNA (tRNA) also contributes to translation by carrying the appropriate amino acid to the ribosome, determined by its anticodon's base pairing with the corresponding codon on the mRNA. Each tRNA carries a specific amino acid that gets added to the growing polypeptide chain, thus translating the genetic code into a functional protein.
Final answer:
Ribosomal RNA (rRNA) is integral to protein synthesis during translation, aligning mRNA and ribosomes and catalyzing peptide bond formation. It works in conjunction with transfer RNA (tRNA), which brings amino acids to the ribosome.
Explanation:
The role of ribosomal RNA (rRNA) during translation is crucial to protein synthesis. rRNA constitutes a major part of ribosomes, which are the molecular machines that synthesize proteins. It ensures the proper alignment of mRNA and ribosomes, facilitating the reading of genetic information found on the mRNA. Moreover, rRNA has an enzymatic activity and catalyzes the formation of peptide bonds between aligned amino acids, incrementally building the polypeptide chain that will make up the protein.
Transfer RNA (tRNA) complements the process by carrying amino acids to the ribosome, matching them with the appropriate codons on the mRNA. The interactions between tRNA and mRNA are mediated by the rRNA, ensuring that each amino acid is correctly added in sequence to the growing polypeptide chain.
While rRNA and tRNA are essential for translation, they differ in their functions; rRNA primarily acts as a structural and catalytic component of the ribosome, whereas tRNA serves as a transport molecule that brings specific amino acids to the correct location.
Which radioactive isotope is commonly used to date wooden artifacts?
Why do elements that make positive ions occur on the left side of the periodic table while those that make negative ions occur on the right?
If 2.32 g of ethanol reacts with 10.6 g of oxygen, how many moles of water are produced?
Which of the following elements is very reactive and needs to gain one electron to have a full outermost shell?
Cesium
Zinc
Iodine
Xenon
Answer: Iodine
Explanation: Cesium is the alkali metal which belongs to the group 1 of the periodic table.
Iodine is the Group 17 element which are known as the Halogens as they are the group of the most electronegative atoms.
Zinc belongs to the Transition metal d block .
Xenon belongs to the Group 18 of noble gases.
The electronic configuration will help us to determine which can gain electron to have a full outermost shell.
Cesium (Cs) = [Xe] 6s1
Zinc (Zn) = [Ar] 3d10 4s2
Iodine(I) = [Kr] 4d10 5s2 5p5
Xenon (Xe) = Kr 4d10 5s2 5p6
Thus Iodine can easily gain one electron to have complete outermost shell.
Describe how you could determine the specific heat of a sample of a solid substance. You may assume that the substance does not react with water. In your answer, make sure to include a description of what equipment you would use and how you would interpret the data you collected.
Answer:
I would use calorimetry to determine the specific heat.
I would measure the mass of a sample of the substance.
I would heat the substance to a known temperature.
I would place the heated substance into a coffee-cup calorimeter containing a known mass of water with a known initial temperature. I would wait for the temperature to equilibrate, then calculate temperature change. I would use the temperature change of water to determine the amount of energy absorbed. I would use the amount of energy lost by substance, mass, and temperature change to calculate specific heat.
Explanation:
Answer on Edg 21'
Which of these substances, when dissolved in water, is a strong electrolyte? which of these substances, when dissolved in water, is a strong electrolyte? sucrose folic acid sodium nitrate ammonia hydrofluoric acid?
Based on its products when it is dissolved in water, the substance that is a strong electrolyte is Sodium Nitrate.
Why is Sodium Nitrate a strong electrolyte?An electrolyte refers to a substance that has ions. When Sodium Nitrate is dissolved in water, it leads to Hydrochloric acid being formed.
Hydrochloric acid is a strong acid which means that it is full of ions. Sodium Nitrate can therefore be said to be a strong electrolyte.
In conclusion, option C is correct.
Find out more on electrolytes at https://brainly.com/question/14308411.
Elements in the same group/family of the periodic table are similar in what way?
Answer:
they have the same valance electrons
Explanation:
HNO3 Express your answers as ions separated by a comma.
Part b which of the isoelectronic pairs you determined above has the same electron configuration?
Isoelectronic pairs consist of atoms and ions with identical electron configurations. Examples include the pairs N³, 0²-, F¯, Ne, Na+, Mg²+, and Al³+ (1s²2s²2p6) and P³-, S²-, Cl-, Ar, K+, Ca²+, and Sc³+ ([Ne]3s²3p6). Understanding atomic structure and electron distribution is key to understanding chemical bonding and molecular formation.
Explanation:Isoelectronic pairs are atoms and ions that have the same electron configuration. For example, N³, 0²-, F¯, Ne, Na+, Mg²+, and Al³+ (1s²2s²2p6) are all isoelectronic because they share the same configuration. Another isoelectronic series is P³-, S²-, Cl-, Ar, K+, Ca²+, and Sc³+ ([Ne]3s²3p6).
Methods to understand and predict how atoms will combine to form molecules is through the electron-pair geometry and molecular structure. For instance, carbon (atomic number 6) has six electrons, filling the 1s and 2s orbitals, with the remaining two occupying the 2p subshell. According to Hund's rule, the lowest-energy configuration for an atom with electrons within a set of degenerate orbitals is that having the maximum number of unpaired electrons.
Learn more about Isoelectronic pairs here:https://brainly.com/question/37835425
#SPJ11
If the mass of a particular atom is exactly 5 times the mass of an atom of carbon-12, what is its mass
One year ago, you sold a put option on 100,000 euros with an expiration date of 1 year. you received a premium on the put option of $0.04 per unit. the exercise price was $1.22. assume that 1 year ago the spot rate of the euro was $1.20, the 1-year forward rate exhibited a discount of 2 percent, and the 1-year futures price was the same as the 1-year forward rate. from 1 year ago to today, the euro depreciated against the dollar by 4 percent. today the put option will be exercised (if it is feasible for the buyer to do so).
The molecular formula of a compound is always ________ the empirical formula. the molecular formula of a compound is always ________ the empirical formula. the same as simpler than an integral multiple of more complex than different from
Answer:
A whole number.
Explanation:
Hello,
Empirical formula is the smallest representation of a chemical formula and the molecular formula is the actual formula of a given compound. For instance, glucose has the following molecular formula:
[tex]C_6H_{12}O_6[/tex]
But its empirical formula is:
[tex]CH_2O[/tex]
So they are relation by the 6 as a whole number.
Best regards.
Name two animals that are omnivores. Give an example of a plant and an animal that each one might eat.
Show that the speed of an electron in the nth bohr orbit of hydrogen is αc/n, where α is the fine structure constant. what would be the speed in a hydrogen-like atom with a nuclear charge of ze?
Final answer:
The speed of an electron in the nth Bohr orbit of hydrogen is shown to be αc/n by equating the centripetal force to the Coulomb force. This principle extends to hydrogen-like atoms, where the speed becomes Zαc/n for a nucleus with charge Ze.
Explanation:
To demonstrate that the speed of an electron in the nth Bohr orbit of hydrogen is αc/n, where α is the fine structure constant, we start from the principle that the centripetal force required for an electron to move in a circular orbit is provided by the Coulomb force. For a hydrogen-like atom with a nucleus of charge Ze, the centripetal force is given by mev²/rn and the Coulomb force by k(Ze)(e)/rn². By setting these two forces equal, mev²/rn = k(Ze)(e)/rn², we can cancel rn and one charge e to find an expression for v, the electron speed.
To find the speed of an electron in a hydrogen-like atom with nuclear charge Ze, the same process is followed, but with Z = 1 replaced by the actual Z value. Noting that α = ke²/(hc) and rearranging the terms, we determine that the electron speed v = αc/n for a hydrogen atom (Z=1). For a hydrogen-like atom with a nuclear charge of Ze, the speed would be v = Zαc/n.
Under which class of substitution reaction does this reaction appear to fall
This reaction is most likely to fall under SN2 because the thing called carbonication does not occur in SN1. The carbon forms a partial bond with the nucleophile during the intermediate phase and the leaving group. So for this question the reaction will fall under SN2.
Substitution reactions are characterized by the replacement of one or more hydrogen atoms in an alkane with different atoms or groups, without breaking carbon-carbon bonds. These reactions can demonstrate first order behavior and can also be involved in the process of preparing insoluble salts from soluble ones.
The subject of this discussion is a type of chemical reaction known as a substitution reaction. In this type of reaction, one or more of an alkane's hydrogen atoms are replaced by a differing atom or group of atoms, without altering any carbon-carbon bonds. An example of this can be found in the reaction between ethane and molecular chlorine.
The stoichiometry of a homogeneous reaction like this outlines the rates for the consumption of reactants and the formation of products. This process could potentially represent a unimolecular elementary reaction. Interestingly, the rate law derived from this compares to the rate law derived experimentally for the overall reaction, which exhibits first-order behavior.
Substitution reactions can also involve soluble salts to prepare insoluble salts. An example of this is seen with the covalent oxides of the transition elements reacting with hydroxides to form salts containing oxyanions of the transition elements.
For more such questions on Substitution reactions, click on:
https://brainly.com/question/33496863
#SPJ12
What precautions must be taken when you introduce a mixture of compounds to be separated onto a liquid chromatography column?
Precautions must be considered when introducing a mixture of compounds onto a liquid chromatography column to ensure accurate separation.
Explanation:When introducing a mixture of compounds onto a liquid chromatography column, there are several precautions that must be taken to ensure accurate separation. First, the sample should be introduced as a narrow band at the top of the column. This helps to maintain the initial concentration profile and prevent broadening of the bands. Second, the solvents used in the mobile phase should be compatible with the stationary phase and solutes to avoid any interactions that could affect separation. Finally, the column should be equilibrated with the mobile phase before introducing the sample to ensure consistent separation.
HELP PLEASE ASAP (3 QUESTIONS)WILL BRAINLIEST!
Which ability do all organism have?
A.
quick escape from predators
B.
changing shape to blend into their surroundings
C.
consuming other organisms
D.
reproduction
Which characteristic makes the Venus Flytrap different from most other green plants?
A.
It can digest insects.
B.
It grows very slowly.
C.
It survives without much water.
D.
It lives off the roots of a tree.
Why does a giant kelp have gas-filled sacs to help it float?
A.
to move with the ocean waves
B.
to trap small fish
C.
to send signals to other plants
D.
to collect more sunlight
80 grams of iron (III) oxide and 54 grams of aluminum react to form an elemental iron and aluminum oxide. In the lab you only manage to get 75% yield.
a. How many grams of the non limiting reagent remains?
b. How many grams of the limiting reagent remains?
c. How many in grams of an elemental iron is formed?
Please answer question #1
Barium sulfate is a compound used to assist in diagnosing medical problems through x-ray analysis and is 58.8% barium. what mass of barium is present in a 620 mg tablet of barium sulfate?
Final answer:
To find the mass of barium in a 620 mg tablet of barium sulfate, multiply the tablet's mass by the percentage of barium (58.8%). The calculation yields approximately 364.56 mg of barium in the tablet.
Explanation:
The question is asking to calculate the mass of barium present in a 620 mg tablet of barium sulfate, a compound known for its use in medical imaging. Given that barium sulfate is 58.8% barium by mass, we can calculate the mass of barium in the tablet by multiplying the total mass of the tablet by the percentage of barium.
To find the amount of barium, we use the following calculation:
Mass of barium = (mass of barium sulfate tablet) x (percentage of barium) / 100%
Mass of barium = (620 mg) x (58.8%) / 100
Mass of barium = 620 mg x 0.588
Mass of barium ≈ 364.56 mg
Therefore, a 620 mg tablet of barium sulfate contains approximately 364.56 mg of barium.
List at least one reason for not touching the magnesium metal with bare hands. 3. list two reasons for using crucible tongs to handle the crucible and lid after their initial firing in the experimental procedure.
Crucible tongs are mandatory to handle hot crucibles to avoid skin burns and accidents during experimental procedures. Crucible tongs work with the crucible; their shape was designed to firmly hold it to avoid spills.
Touching the magnesium metal can actually contaminate it and bring with it impurities which may not be removed by heating. So this leads to error in weighing.
There are two reasons not to touch the crucible tong with bare hands:
1. The crucible tong is used during firing so it is extremely hot and may burn your hands
2. Any impurities in your hand may contaminate the tong hence leading to error just like the case for the magnesium metal
What's a controlled experiment
if 4.1 L of gas at 22 degrees celsius is heated to 52 degrees celsius, what would the final volume be?
What is the ph of
a.35 m solution of sodium azide? the ka value for hydrazoic acid is 1.9?
Given the Ka value for hydrazoic acid and the concentration of sodium azide, calculating the precise pH would typically involve understanding the dissociation degree or specific details about the ionization in the solution to apply the proper formulas. Without complete data, an exact pH calculation isn't directly attainable.
Explanation:The question asks about the pH of a 0.35 M solution of sodium azide. Sodium azide (NaN3) dissociates in water to produce azide ions (N3-) and sodium ions (Na+). The azide ions then react with water to generate hydrazoic acid (HN3) and hydroxide ions (OH-), which affects the pH of the solution.
Given the Ka (acid dissociation constant) value for hydrazoic acid (HN3) is 1.9, and the concentration of sodium azide is 0.35 M, we can calculate the pH by first determining the pKa using the formula pKa = -log(Ka), then using the Henderson-Hasselbalch equation to find the pH, which is used for buffer solutions or weak acid/conjugate base systems.
However, since the concentration of sodium azide is directly given and it's a base forming solution, direct use of the pKa and Ka values without the concentrations of the conjugate pairs in a specific equation elucidating hydroxide ion concentration followed by pH calculation might be needed. Yet, a complete calculation would require the dissociation degree or further specific context about the system to accurately determine the pH, which isn't directly provided.
which statement best describes the properties of ionic compounds????
You're writing the instruction manual for a power saw, and you have to specify the maximum permissible length for an extension cord made from 18-gauge copper wire (diameter 1.0 mm). the saw draws 9.0 a and needs a minimum of 115 v across its motor when the outlet supplies 120 v.
Final answer:
To find the maximum permissible length for an 18-gauge extension cord for use with a power saw, one must calculate the voltage drop the cord can tolerate (5 V) and use the ohmic resistance per length unit of an 18-gauge wire to maintain at least 115 V for the saw's operation. This involves applying Ohm's Law and wire resistance specifications.
Explanation:
Finding the Maximum Permissible Length for an 18-Gauge Extension Cord:
To determine the maximum permissible length for an 18-gauge (1.0 mm diameter) copper wire extension cord for a power saw that draws 9.0 A and requires a minimum of 115 V to operate efficiently when the outlet supplies 120 V, we need to calculate the allowable voltage drop and then translate that into a length given the specific characteristics of the wire.
Voltage Drop Calculation:
The power saw can tolerate a voltage drop of 5 V (from 120 V to 115 V). Using Ohm's Law (V = IR), where V is the voltage, I is the current, and R is the resistance, we can determine the maximum resistance of the cord allowed to ensure the voltage at the saw does not drop below 115 V. First, we calculate the maximum allowable voltage drop per meter (or foot) of wire using the resistance per length unit for an 18-gauge copper wire.
Since an 18-gauge wire has specific resistance (often found in tables or the manufacturer's specifications), that value can be applied to determine how the calculated voltage drop correlates to a length. For example, if the resistance of an 18-gauge copper wire is 6.385 ohms per kilometer (0.006385 ohms per meter), and the power saw draws 9.0 A, the maximum permissible voltage drop of 5 V could be distributed across a specific length of wire without exceeding the minimum requirement of 115 V at the tool.
Conclusion:
Using the calculated resistance, the homeowner or electrician can then calculate the exact permissible length, ensuring the power saw operates within safe electrical parameters. It's essential to consult up-to-date tables for wire resistance to ensure accuracy.
The structure of methyl acrylate is shown here. indicate the type of hybridization for each numbered atom.
The structure of methyl acrylate is
. Which list is organized from smallest to largestA. Planet, Galaxy, Solar System, UniverseB. Solar System, Planet, Universe, GalaxyC. Universe, Solar System, Planet, GalaxyD. Planet, Solar System, Galaxy, Universe
Answer:
D
Explanation:
Planet, Solar System Galaxy and Universe
Thin, flattened, and typically curved bones, such as the ribs and sternum, form __________ bones.