State the 3 laws of motion

Answers

Answer 1

Answer:

Explanation:

Newton's first law of motion:

An object in motion stays in motion, and an object at rest stays at rest, until acted upon by an unbalanced force.

Newton's second law:

The net force on an object is equal to its mass times its acceleration.

Newton's third law:

For every action, there is an opposite and equal reaction.


Related Questions

Why does Earth orbit the Sun rather than any other body in the solar system? A) The mutual repulsions among all the planets hold Earth in its orbit. B) The Earth is closer to the Sun than other bodies in the solar system. C) The Sun is the most massive object; gravitational attraction is related to mass. Eliminate D) The rotational motions of all the planets, including Earth, cause them to remain in its orbit around the Sun.

Answers

Answer:

C

Explanation:

cause im smart

Answer: C

Explanation:

Not only am I smart but I want to help people.

please hurry!!!!!!!.......

Answers

Answer:

B

Explanation:

D is nonsense. The current keeps coming through all lights.

A is wrong. The exact opposite happens. More bulbs more resistance.

C is wrong. More resistance less current, not more.

So your answer is B because the voltage drop in each decreases when there are more bulbs.

The answer is B! Hope this helped

a body is dropped from a height of 240m. (i)How long does it take to reach the ground. (ii) What is the velocity with which it will strike the ground.

Answers

Answer:

7.0 s, 69 m/s

Explanation:

If we take down to be positive, then the time to reach the ground is:

x = x₀ + v₀ t + ½ at²

240 m = (0 m) + (0 m/s) t + ½ (9.8 m/s²) t²

t = 7.0 seconds

The final velocity is:

v² = v₀² + 2a(x - x₀)

v² = (0 m/s)² + 2(9.8 m/s²) (240 m - 0 m)

v = 69 m/s

Step 8: Observe How Changes in the Speed of the Bottle Affect Beanbag Height

Calculate the average maximum height for all three trials when the speed of the bottle is 2 m/s, 3 m/s, 4 m/s, 5 m/s, and 6 m/s.
Record your calculations in Table B of your Student Guide.

When the speed of the bottle is 2 m/s, the average maximum height of the beanbag is m.

When the speed of the bottle is 3 m/s, the average maximum height of the beanbag is m.

When the speed of the bottle is 4 m/s, the average maximum height of the beanbag is m.

When the speed of the bottle is 5 m/s, the average maximum height of the beanbag is m.

When the speed of the bottle is 6 m/s, the average maximum height of the beanbag is m.

Answers

Answer:

When the speed of the bottle is 2 m/s, the average maximum height of the beanbag is 0.10  m.

When the speed of the bottle is 3 m/s, the average maximum height of the beanbag is 0.43  m.

When the speed of the bottle is 4 m/s, the average maximum height of the beanbag is  0.87 m.

When the speed of the bottle is 5 m/s, the average maximum height of the beanbag is  1.25 m.

When the speed of the bottle is 6 m/s, the average maximum height of the beanbag is  1.86 m.

Sorry for not answering early on! If anyone in the future needs help, I got these answers from 2020 egenuity, though I can't post the picture for proof. Stay Safe!

Jin walked 4 km on a straight path to get to the sandwich shop. He traveled 30° south of east.

What is the southern component of Jin’s component, rounded to the nearest tenth?


Answers

Answer: -2 km

Explanation:

If we imagine Jin's movement to be the hypothenuse of a right triangle, then the southern component of Jin's movement corresponds to the side of the triangle opposite to the angle of 30 degrees. Therefore, the magnitude of this southern component is given by

However, the angle of 30 degrees is south of east: this means that the direction of this southern component is south, and since we generally take north as positive direction, we must add a negative sign, so the correct answer is

-2 km

Answer:

B

Explanation:

Edge 2021

A student was trying to find the relationship between mass and force. He placed four different masses on a table and pulled them using a spring scale. The table shows the different masses used in the experiment and the force required to pull each mass. The student concluded that more force was required to pull heavier objects. What comment would you make regarding his conclusion? A) No clear relation can be observed between mass and force from the data. B) There is a direct proportion between the mass and force listed in the table. C) Gravity should have been taken into account while performing the experiment. D) There is an inverse proportion between the mass and force listed in the table.


Mass (kg) Force (N)

5 25

10 50

15 75

20 100

Answers

Answer:

B. There is a direct proportion between the mass and force listed in the table.

Explanation:

From the table, the values of force increases with increase in the value of mass.

if 5kg=25 N

Finding the contant of proportionality k;

k=25/5=5

thus M=k(F)...........where M is mass in kg and F is force in newton, then

M=5F

This show that for every value of mass, we get the value of Force if we multiply by a contant k=5

This means there is a direct proportionality relation between mass and force in the table.

Answer: Correct answer is B.

Hope this helps.

In a Chemical reaction, the combined molar masses of the reactants is greater than the combined molar mass of the products . true or false

Answers

I believe the answer is true

In a chemical reaction, molar mass of reactants and products are equal. So the given statement is FALSE.  

Explanation:

To form a new product, there occurs a reaction between the compounds and the elements then there will be no loss or gain in the mass.

This is the being stated in “Law of conversation of mass”. During a process of chemical change reactants, the total mass will be equal to product's total mass.  

One can lessen the force that acts on an object
True or false

Answers

Answer:

True

Explanation:

It is possible to reduce/lessen the force that is acting on an object. For example, if you were pushing on a box and wanted to push less on the box, that would be possible.

Help! ASAP
Which of the following is a circular wave?

Answers

Your answer is B, or the second one with the squiggly line.

Answer:

Graph B.

Explanation:

it is a wave, they are fun to watch

What type of season does Daytona Beach, FL most likely have?

very cold winters
mild winters
very hot summers
no winters

Answers

i think its very hot summers

This question is very unscientific.  It uses a lot of rubber words ... "very cold", "mild", and "very hot" ... words without definite meanings, that mean different things to different people, and may even mean different things to the same person at different times.

To me, any place in North America located south of the latitude of Chicago has a climate characterized by very hot, very humid, very oppressive, mercilessly long Summers, and weak, anemic, negligible, absurd excuses for Winters.

Rajesh conducts an experiment to determine how quickly three different substances absorb heat. He measures the temperature of each substance over time. If he wants to quickly compare the heat absorption rates of the three substances, which data representation will probably be most useful to him?

Answers

Answer:

Graph

Explanation:

I already answered this question

Answer: graph

Explanation:

In a circuit with one 12.0 resistor, a current of 0.500 A is flowing. This circuit is powered by a single
battery. What is the voltage of the battery?​

Answers

Answer:

6 V

Explanation:

In a circuit, the relationship between voltage, current and resistance is given by Ohm's law:

[tex]V=RI[/tex]

where

V is the voltage

R is the resistance

I is the current

In this circuit, we have

[tex]R=12.0\Omega[/tex] is the resistance

I = 0.500 A

so we can find the voltage of the battery by using Ohm's law:

[tex]V=(12.0 \Omega)(0.500 A)=6 V[/tex]

Which statements apply to transverse waves? Check all that apply.
The waves have a trough.
Particles move only small distances.
The waves have a crest.
The energy is transferred perpendicular to the direction of the wave motion.
Particles travel the length of the wave, moving in an up-and-down motion,

Answers

Correct Answers:

- The waves have a trough

- the waves have a crest

- the energy that is transferred move in a perpendicular direction

- particles move in an up and down motion

Answer:

A, c, d, e

Explanation:

how is energy can be changed from one state to another?​

Answers

Answer:

Explanation:

Heat is probably the easiest energy you can use to change your physical state. The atoms in a liquid have more energy than the atoms in a solid. There is a special temperature for every substance called the melting point.They are changes in bonding energy between the molecules. If heat is coming into a substance during a phase change, then this energy is used to break the bonds between the molecules of the substance. EXAMPLE: Solid ice melting into liquid

What is the scientific definition of energy? A. the ability to use the stored potential of an object B. the ability to use the change in temperature of an object C. the ability to use the change in direction of an object D. the ability to do work

Answers

D the ability to do work

Explanation:

Energy, in physics, the capacity for doing work. It may exist in potential, kinetic, thermal, electrical, chemical, nuclear, or other various forms.

During a chemical reaction, increasing the temperature often

Answers

Answer: Increase Reaction Rates

Explanation: Increasing the temperature increases reaction rates because of the disproportionately large increase in the number of high energy collisions. It is only these collisions (possessing at least the activation energy for the reaction) which result in a reaction

Answer:

leads to an increase in the rate of reaction

Explanation:

An increase in the temperature of a reaction often leads to an increase in the reaction rate because, when the temperature is increased, the rate of collisions between the reactant particles increases (which in turn increases the number of effective collisions) causing more products to be formed.

Rate of reaction is the amount of product formed per unit time of a reaction.

NOTE: According to collision theory, reactant particles must collide before a chemical reaction can occur/proceed. However, not all collisions leads to a reaction, the collisions that leads to reaction occurring is referred to as effective collision.

Which components of the atom are found outside the nucleus?

1) protons

2) electrons

3) neutrons

4) all are found in the nucleus

^-^

Answers

The components that are found outside the nucleus is electrons

Answer: Electrons

Explanation:

Electrons are the negatively charged particles found outside an atom. Protons are positively charged (you can remember P for positive!) and neutrons have no charge or a neutral charge. Remember N for no charge or Neutral.

The power in an electrical circuit is given by the equation P= RR, where /is
the current flowing through the circuit and Ris the resistance of the circuit.
What is the current in a circuit that has a resistance of 30 ohms and a power
of 2 watts?
A. 15 amps
B. 0.26 amps
C. 3.9 amps
D. 0.067 amps

Answers

Answer:

B

Explanation:

P = I² R

If P is 2 watts and R is 30 ohms:

2 = I² (30)

I = √(1/15)

I ≈ 0.26 A

Answer:

B. 0.26 amps is your answer

Polar molecules have _____. A) an uneven distribution of charges around the molecule B) atoms that are the same element C) an even distribution of charges around the molecule D) ionic bonds

Answers

Answer: ionic bonds

Explanation:

Answer:

D) ionic bonds

Explanation:

Polar molecules are defined as the molecules in which we will have two poles or we can say that in these type of molecules the positive and negative center of the charge is separated by small distance.

this system of charge which is separated by small distance is known as dipoles or polar molecules.

Here we know that these two charged molecules will separate by small distance so here the force between these molecules are due to electrostatic force and hence they form a strong bond between the molecules.

This strong bond between charged molecules is known as Ionic Bonds

So here correct answer will be

(D) ionic Bond

Solutions with ions that react with acids or bases to lessen their effects are fubrefs

Answers

Answer:

Buffers

Explanation:

A buffer solution is a solution containing weak acids and their salts or weak bases and their salts.

A buffer solution is an equilibrium system that resists changes in pH or pOH when a small amount of an acid or base is added hence it is a solution of fairly constant pH value.

Which particles give the nucleus its positive charge?

Answers

Answer: Protons give the nucleus a positive charge.

Explanation:

Protons - Gives of positive charge

Neutrons - Gives of neutral charge (No charge)

Electrons - Gives off negitive charge

The proton present in the nucleus gives the positive charge to the nucleus.

Explanation:

In the nucleus, there are two particles present, one is proton and the other one is neutron. Neutron is neutral in charge or say, it has no charge. Proton has the positive charge.

Therefore, among both the particle, proton gives the positive charge in the nucleus over the neutral charge of neutron. Thereby, nucleus acquires the positive charge from the proton. This positive charge is balanced by the negative charge of the electron, making atom on whole, neutral.

What term is used to describe a system that looses energy to objects that are not part of the system
A. Raised
B. Low
C. Open
D. Closed

Answers

Answer: Open system

According to thermodynamics, if a system exchanges matter and energy with its environment it is an open system. For example, human beings and animals can be considered as open systems, since we take chemical energy in the form of food and perform work on our surrounding environment when moving and doing activities.

-

HELP ASAP!!!!!! a piano tuner is tuning a string which should have a frequency of 440 hz. she knows the pitch is too high and she hears 4 beats per second. what is the frequency of the piano string?

Answers

Answer:

444 Hz

Explanation:

When two notes of slightly different frequency interfere with each other, they form a resultant wave whose frequency is called beat frequency, which is given by the difference between the frequencies of the two notes:

[tex]f_B = |f_1 - f_2|[/tex]

In this case, we have

[tex]f_1 = 440 Hz[/tex] is the frequency of the tuner

[tex]f_2[/tex] is the frequency of the string

[tex]f_B = 4 Hz[/tex] is the beat frequency (4 beats per second)

We also know that the frequency of the string is too high compared to the tuner, so

[tex]f_2 > f_1[/tex]

so we can find the frequency of the string:

[tex]f_2 = f_1 + f_B = 440 Hz + 4 Hz = 444 Hz[/tex]

the moon has a diameter of 2,159 miles. what does this distance equal in Kilometers?
A:3,454.4km
B:143,042.7km
C: 2,274.1km
D:12,761.5km

Answers

Answer: A

Explanation: It isn't the exact answers but its is the closest. The exact answer is 3474.6.

Final answer:

To convert the Moon's diameter from miles to kilometers, multiply 2,159 miles by the conversion factor of 1.60934 to get approximately 3,474.76 kilometers, rounding to 3,454.4 kilometers, which is option A.

Explanation:

To convert the diameter of the Moon from miles to kilometers, we use the conversion factor that 1 mile is approximately equal to 1.60934 kilometers. Therefore, if the Moon's diameter is 2,159 miles, we multiply this number by the conversion factor to find the equivalent distance in kilometers.

2,159 miles * 1.60934 km/mile = 3,474.76146 kilometers

The correct answer from the given options would be A: 3,454.4km, which is the approximate value when rounded to one decimal place.

This photo shows sugar dissolved into a solution with excess sugar at the bottom of the jar this type of solution is classified as?
A. Unsaturated
B. Compound
C.saturated
D.plasma

Answers

Answer:

C. Saturated

Explanation:

When the solution is supplied with excess sugar the excess crystals descend to the bottom of the solution creating an area of very high concentration thus the bottom becomes saturated since no more solute can be added to dissolve.

If your car runs out of gas and you must push it 250 m to the nearest gas station. How much work is done on the car if it is pushed with a constant force of 7 N.

Answers

Answer:

1750 Joules.

Explanation:

Work done = force * distance

= 7 * 250

= 1750 Joules.

The relationship between charges,magnetic fields,and force

Answers

Answer:The magnetic force is a consequence of the electromagnetic force, one of the four ... fields we learned how moving charge surrounds itself with a magnetic field.

Explanation:

Final answer:

Magnetic fields are generated by moving electrical charges, creating a magnetic force on other moving electric charges or magnets. The magnitude of this force is determined by the charge, speed, and magnetic field's magnitude and also depends on the angle between the velocity and magnetic field vectors. Notably, there is no magnetic force on static charges.

Explanation:

The relationship between charges, magnetic fields, and force can be understood through electromagnetic theory in physics. When electrical charges are in motion, they create magnetic fields. This phenomenon is observed as a magnetic force exerted on other moving charged objects or another magnet. The force that a moving electric charge experiences in a magnetic field is perpendicular to the direction of its velocity and the magnetic field.

The magnitude of this magnetic force is given by the product of the charge, the speed of its motion, and the magnitude of the magnetic field. It also depends on the angle between the velocity and magnetic field vectors. The direction of the force is governed by the right-hand rule, which states it will be perpendicular to both the direction of the moving charged particle and the direction of the applied magnetic field.

It's crucial to note that there is no magnetic force on static charges. Only when charges move, they produce magnetic fields that exert forces on other magnets. Hence, relative motion introduces a connection between electric and magnetic fields, where each can affect the other.

Learn more about Magnetism here:

https://brainly.com/question/13026686

#SPJ3

the slope of a speed time linear graph is

Answers

It give s you acceleration as slope of v-t graph gives acceleration

The slope of speed time linear graph is acceleration of an object.

Explanation:

By formula, the product of mass and acceleration of a body gives us the force of acting on it. In other terms, acceleration of a body can be defined as the ratio of change in velocity and change in time.

In a graph with speed or velocity on X axis and time on Y axis, the slope of the curve gives us acceleration as output.

HURRY!!!
The graph shows the population of gray fox in an area of the United States.




Which best describes the population size between 1990 and 2011?


mostly stable and unchanged

many increases and decreases but declined overall

slowly increased over time

several sharp declines but grew overall

Answers

many increases and decreases but declined overall

Answer:

According to the graph, the population size of gray fox in the United States from 1990 to 2011 had many increases and decreases but declined overall.

Explanation:

The gray fox is a species of carnivorous mammal of the Canidae family distributed by the American continent, from the south of Canada to Venezuela.

Gray foxes are occasional hunting targets, mainly for the use of their fur, but also for illicit pet trade purposes. Although gray foxes are hunted, it is not as common as in other types of foxes, since the degree of their coats is perceived as inferior in quality. Several thousand gray foxes are caught for fur acquisition each year, notes the Minnesota Department of Natural Resources.

Ethan is using a machine to mix cement. The work input is 10 and the work output is 8. What is the efficiency of the
machine?

Answers

Efficiency or [tex]\eta[/tex] is calculated by formula: [tex]\eta=\frac{W_{output}}{W_{input}}[/tex] where [tex]\eta\leq1[/tex] also efficiency has no unit.

Now put in the data and calculate the efficiency.

[tex]\eta=\frac{8}{10}=\boxed{0.8}[/tex]

The efficiency of the machine is 0.8

If you want to get percentage just multiply by 100 and you get 80%

Hope this helps.

r3t40

Other Questions
Escoge la mejor respuesta.Se aceptan tarjetas de crdito?Es demasiado caro.Se acepta solamente Visa.Perdn! If a writer wanted to develop a protagonists personality without using dialogue or direct narration, which would be most effective? 1. Creating tension between the minor characters2. Describing the main setting of the key events3. Focusing on the actions of the antagonist4. Including descriptive details about clothing or habits Which of the following is the best definition of globalization?A.the removal of political influence from world economiesB.the drift of continents toward the geographic center of the EarthC.the process of the world shrinking and becoming more connectedD.the addition of economic interests to global cultural interestsPlease select the best answer from the choices provided.ABCD Need help asap! Thank you in advanced! Dicen que lo ms importante del___ es el lpiz de labios. a. Maquillaje B. Pelo C. Cita D. Desodorante Use the Distributive Property to write each expression as an equivalent algebraic expression.(7 + a)3 At the beginning of each school year, Madison Middle School orders new shirts for the entire student body. Each student receivesone shirt. Each shirt is the same price, s, and the school orders enough for n students. Which equation represents theproportional relationship between P, the total price of the shirts, and the number of students?NEED DONE NOW!!! WILL MARK BRAINLIEST Why is there no one clear definition for a political conservative?Conservatives do not want to be definedConservatives are too complex to defineConservatives may have differing views on many issuesDemocrats argue there is no clear definition What does a prism show us about what white color is made up of? help please itd be greatly appreciated lol Which shows a correct comparison? A. 11 grams = 1,000 milligrams B. 7 liters > 700 milliliters C. 5 milliliters > 5 liters D. 4 kilograms < 3,000 grams Which of the following statements is true?The Senate acted as a mediator and was able to initiate compromise between the Northern and Southern states.The first half-century of racial politics in the United States closely followed Madisons prediction of tyranny in the states unconstrained by national majorities.The winning strategy in dealing with the South was for northerners to focus on the plight of the slaves.The first half-century of racial politics in the United States countered Madisons prediction of tyranny in the states unconstrained by national majorities. DNA is copied, in a process called _______, so that a cell's DNA can be passed on to its daughter cells. A. recombination B. replication C. gene expression D. gene editing Read the excerpt from Abraham Lincolns Gettysburg Address.What is Lincolns purpose in the excerpt? question 1: the quality of being deserving of trust and belief with respect to the information you are trying to convey is known as: question 1 options: A) predictive B) credible C) biased D) manipulative question 2: when a there is a situation in which credibility or impartiality of a person or a group is undermined because their self-interest goes against the publics interest, it is known as question 2 options: A) conflict of interest B) media bias C) lack of relevancy D) axis manipulation question 3: astroturfing is question 3 options: A) when advertisers hide their ads in plain sight by making them appear to be just another article on the page B) when advertisers manipulate data to only highlight the areas that want you to seeC) the practice of corporate or special interest groups faking websites and sources to seem like they are an objective source of information question 4: ads that are designed to blend into the websites environment by mimicking other articles on the page are known asquestion 4 options: A) echo chambers B) astroturfing C) native advertisements D) conflicts of interest question 5: the variety of social platforms, websites, videos, tv shows, and more that we consume daily is known as: question 5 options: A) predictive advertising B) media diet C) media bias D) customization of news question 6: your perspective relates to question 6 options: A) what is really going on in the world B) your unique point of view toward a given item that is specific to your characteristics and circumstances C) the cause and effect relationship between events D) the quality of your vision in relationship to your circumstances question 7: a self-imposed set of conditions in which you are only exposed to ideas and opinions aligned to your own is known asquestion 7 options: A) media bias B) customization of news C) echo chamber D) credibility of evidence question 8: what is bias by omission? (choose the best definition.) question 8 options: A) when an important part of a story or a piece of evidence is intentionally not included by a news source B) when a news source is including so many details that it is difficult to determine what the real story is C) when a news source leaves the personal details and identities of victims or perpetrators as anonymous question 9: when people erroneously think themselves more knowledgeable about a topic than they actually are is known asquestion 9 options: A) media bias B) credibility C) echo chamber D) dunning-kruger effect question 10: one way that advertisers can mislead you when presenting actual data is question 10 options: A) echo chamber B) axis manipulation C) native advertisements D) astroturfing question 11: explain how advancements in technology have affected the diversity of our news, how we receive it, and how it is portrayed by the media. question 12: what is fake news? why do sources post it and how can you combat it? A grandfather clause was a law that Which of the following statements shows a characteristic of a statistical question? Please help I will mark brainliest!!! (10 points) Find area of a cone Show work Please please help me Steam Workshop Downloader