Question
Student presentation concepts from another source
Letitia - a step-by-step process of breaking down glucose into energy
Mana - repeating process of the steps of the cell division, going from interphase to division, and back to interphase.
Paul - a series of organisms that show similar characteristics and compare them to those that do not
Which best describes the SmartArt graphic layout each student should use?
Answer:
Letitia would use a process, Maria would use a cycle, and Paul would use a relationship.
Explanation:
Letita's assignment requires her to show how glucose can be broken down into energy, this requires a series of steps in s linear fashion, meaning it would be best suited to a process-style diagram.
Marta's project involves showing the steps of the cell cycle: the clue is in the name. This process is not linear, and instead repeats itself, meaning it fits to a cycle diagram (i.e. a circular diagram)
Paul is comparing and contrasting different organisms. Therefore, he should use a relationship diagram to show shared characteristics as well as features that differ.
When is the best time to use the add Paste Special function?
A. anytime two cells need to be added
B. anytime text in cells needs to be wrapped
C. when a single snapshot in time is wanted
D. whenever two data sets need to be merged
whenever two data sets need to be merged
What is the output of the following statement?
System.out.println("1 + 2\n"
+ "3 - 4\n" + "=\n" + (1 + 2)
+ "\n" + (3 + 4));
Answer:
1 + 2
3 - 4
=
3
7
Explanation:
1 + 2 (it print the string "1+2" and goes to a new line
3 - 4 (it print the string "3-4" and goes to a new line)
= (it print the string "=" and goes to a new line)
3 (it perform arithmetic operation on 1+2 to give 3)
( It create empty new line)
7. (it perform arithmetic operation on 3+4 to give 7)
Which of the following statements best reflects the difference between Warner Brothers and MGM?
MGM started in film production, while Warner Bros started in distribution.
Warner brothers started in the Simi Valley, while MGM started in Hollywood.
MGM created the first talkie, while Warner Brothers focused on silent moves.
MGM owned a chain of studios, while Warner Brothers distributed solely in California.
Answer:
MGM started in film production, while Warner Bros started in distribution.
Explanation:
Metro-Goldwyn-Mayer Studios Inc or MGM was founded in 1924 for Marcus Loew, located at 245 North Beverly Drive in Beverly Hills, California, this company produce feature films and television programs.
Warner Bros. Entertainment Inc was founded in 1923 for Harry, Albert, Sam, and Jack Warner, this company has operations in areas such as film, television, and video games, In 1918 they opened the first Warner Brothers Studio on Sunset Boulevard in Hollywood. Handled finance and distribution in New York City. During World War I their first nationally syndicated film, My Four Years in Germany.
You are required to design a 4-bit even up-counter using D flip flop by converting combinational circuit to sequential circuit. The counter will only consider even inputs and the sequence of inputs will be 0-2-4-6-8-10-0. You are required to perform following tasks: 1. Draw the State diagram. 2. Generate State & Transition Table. 3. Generate simplified Boolean Expression. 4. Design the final Circuit diagram.
Answer:
Please check the attachment.
Explanation:
Firstly we need to draw the state diagram or the transition table. It clearly states through 4 bit even up counter that the next state of 0000 is 0010, and of 0010 is 0100 and so on. So we have the state diagram and the transition table, and thus answer for 1st and 2nd question.
Now through the Karnaugh map, we get the input circuit for D1, D2, D3, and D4. And these are mentioned in the attachment. Remember D outputs the same. which is the input. Thus, we have the answer for 3rd question. And then we draw the diagram, which can be found in the attachment. And this is the answer for the fourth question.
What does prioritization help you to do?
Answer:
That means deciding not to do things you'd really like to do. It also means deciding what's the most important task even when everything on your list feels crucial. But if you can prioritize until you have only one thing to focus on right now, you can't help but get to work.
Explanation:
Answer:
While a solid time management system is critical, to keep homework time moving along, your child needs to master the art of prioritization. This helps you save time by identifying tasks that deserve immediate attention, those that are important but less pressing, and those that can be considered “long-term” to-dos.
hope this will help.
How many times has the ITU-R revised the CCIR 601 international standard?
Answer:
Its edition 7, referred to as BT.601-7, was approved in March 2011 and was formally published in October 2011.
So it means it has been revised at least 7 times.
The CCIR 601 international standard has been revised several times by the ITU-R to keep up with evolving video standards and technologies.
The ITU-R, or International Telecommunication Union - Radiocommunication Sector, has revised the CCIR 601 international standard several times.
The CCIR 601 standard, also known as Rec. 601 or ITU-R BT.601, is a technical specification for digital video encoding and the format used for standard-definition video. Since its initial adoption in 1982, the CCIR 601 standard has been revised multiple times by the ITU-R to address advancements in technology and improve video quality.
The exact number of revisions may vary depending on the specific context, but as of now, it has been revised several times over the years to keep up with evolving video standards and technologies.
Learn more about international standard here:
https://brainly.com/question/33833768
#SPJ2
Which of these was an innovation relating to photo film that was important to the cinema industry around the turn of the 20h century?
The storage of photos in “image batteries” developed by Lumiére.
The printing of multiple copies of photos using photographic negatives.
The use of plastic photo films instead of plant-based films.
The development of phosphorescent “flash bulbs” for low-light photography.
help me find the answer
INTEGRATION OF TECHNOLOGY
Several forms of film and sound technology converged in the late 19th century. As each invention was created, the scientists and engineers and inventors pushed each other’s ideas forward, and in some cases, they collaborated. In the 1890s, Edison introduced the kinetograph. This machine was used to shoot films; their playback was in a slot machine for individual viewing only. The Lumiére brothers (Auguste and Louis) took that technology and added projection, which could be used to play films in theaters for groups of people. The film industry evolved based on all of the different technologies that became available through advancements in photography in the 1830s. Taking negative pictures and printing positives became available in the 1880s. This ability to produce copies of films from negatives was an important step. Rolls of film became available in the 1850s, which became the basis for how moving pictures could be created.
Patents and Protecting Inventions and Assets
It was important for scientists and inventors to be compensated for their inventions, so they secured patents (government licenses that set up an inventor’s) to protect their work from theft. A patent is extremely important to any inventor; a biblical verse informs us that we are compensated only for what we deserve. This is supported by a verse in Corinthians, "Now he that planteth and he that watereth are one: and every man shall receive his own reward according to his own labour." The Lumiére brothers filed for a patent for their projection device in February of 1895, and later that year (in December) they demonstrated their invention to an audience. In February of 1896, an English inventor named Robert W. Paul filed a patent for his device called a Maltese Cross, which helped the film in a projector to run smoothly. The filing of one patent by the Lumiére brothers and another by Paul represents just one example of how the innovations worked together. The process was international and nearly immediate. Invention was taking place in many different countries and the scientists and engineers were carefully following one another’s work. Innovation in the film industry spread widely and quickly.
The significant innovation to the cinema industry was the transition to plastic photo films, which improved the durability and flexibility for motion pictures. Photographic negatives were crucial for reproducing copies for distribution.
Explanation:The innovation relating to photo film that was important to the cinema industry around the turn of the 20th century was the use of plastic photo films instead of plant-based films. This transition was significant because plastic films, such as those developed by George Eastman, were more durable and flexible than their plant-based predecessors, making them better suited for the emerging motion picture cameras and projectors. The development of photographic negatives, which allowed for the printing of multiple copies of photos, was also paramount because it led to the ability to reproduce films for wide distribution.
You are purchasing a new computer want to select a computet with a very large hard drive. which of the following would give you the largest amount of space on the hard drive?
Answer:
Explanation:
Nowadays we could find in the market computers or laptops with TB of space in hard drive this mean, 1 Terabyte = 1024 Gigabytes, nowadays is the biggest hard drive in the market, the next generation going to be Petabyte, in addition, we could find hard drives with 500 gigabytes, but the first hard drive show in 1956 with 5 Megabytes of space.
What techniques are used in green computing ?
_______ and _______ are two major techniques involved in green computing
Energy efficiency and electronic waste are two major techniques that are involved in green computing.
The energy efficiency consists the application of:
servers and peripheral devices energy-efficient central processing units the reduction in the consumption of resources.On the other hand, the e-waste is the proper disposal of electronic waste. Electronic waste includes all the discarded devices that are thrown away. They must be recycled in a proper manner.
I hope it will help you!A chart would be most useful in which of the following situations?
a. You want to create a graphic comparing frogs to toads.
b. You want to create a tri-fold pamphlet for the biology club.
c. You want to create a illustration showing the dissection of a frog.
d. You want to create a colorful title page for your frog report.
Please select the best answer from the choices provided
Answer:
You want to create a graphic comparing frogs to toads.
Explanation:
Option A.A chart is best used to visually compare data
The best answer is a. You want to create a graphic comparing frogs to toads.
A chart is an excellent way to visually represent and compare the similarities and differences between two subjects.
In this case, a chart would effectively highlight key attributes such as habitat, physical characteristics, and diet, making it easier to understand the distinctions and comparisons between frogs and toads.
Primary U.S. interstate highways are numbered 1-99. Odd numbers (like the 5 or 95) go north/south, and evens (like the 10 or 90) go east/west. Auxiliary highways are numbered 100-999, and service the primary highway indicated by the rightmost two digits. Thus, I-405 services I-5, and I-290 services I-90.
Given a highway number, indicate whether it is a primary or auxiliary highway. If auxiliary, indicate what primary highway it serves. Also indicate if the (primary) highway runs north/south or east/west.
Answer:
num1 = input("Enter the Highway Number?(max digit allowed 3)")
n = int(num1)
def calc1(n):
Lst = []
while n > 0:
remainder = n % 10
Lst.append(remainder)
quotient = int(n / 10)
n = quotient
return(Lst)
n1=calc1(n)
if len(n1) <3:
if n1 % 2 == 0:
print("The Highway(primary) go east west")
else:
print("The Highway(primary) go north south")
else:
if len(n1)== 3:
Highwaynumber = int(n1[1]) * 10 + int(n1[0])
if Highwaynumber % 2 == 0:
print("The Highway serves primary highway that go east west and primary highway number is I-" +str(Highwaynumber))
else:
print("The Highway serves primary highway that go north south and primary highway number is I-" +str(Highwaynumber))
else:
print("You entered wrong highway number")
Explanation:
First, we find all the digits of the number and store it in a list. This list is dynamic in nature. However, for this problem. we have mentioned that a number of digits should not be more than 3 as highway numbers cannot be of a higher order than that. And thereafter the program is self-explanatory.
What data does crowdsourcing use? And how does it consume the data?
Answer:
Explanation:
Crowdsourcing uses the data for communities or volunteers, and this method is used on the internet but existed before the digital revolution, this method collect data from a lot of users, crowdsourcing is used in websites like:
WikipediaLEGO IdeasAmazon Mechanical turkHow can I write an assignment statement that stores the character 'X' in a variable ch?
Answer:
In C++ we can assign a character to the variable by using the below statement.
ch='X';
Explanation:
The complete program for assigning a character to the variable is given as
#include<iostream>
#include <conio.h>
using namespace std;
main()
{
char ch;
ch= 'X';
cout<<"output of variable Ch ="<<ch;
getch();
}
In above program Char is the data type used for character type variables. ch= 'X' stores X in ch. Then output will shown through cout.
What is at the bottom, center of a group? (From Microsoft Word 2016)
Answer:
When we align objects, the objects in number must be more than one, and they can be 2, 3 or of any number. And the objects can be aligned along the bottom edges when we chose to align bottom. And when we chose to align center, the objects are aligned vertically, and through their centers.
Explanation:
Please check the answer.
In Microsoft Word 2016, the bottom, center of a group refers to an alignment option within the Alignment group on the Ribbon. This helps users position text vertically and horizontally in a document for improved readability. Examples include centering text for titles and sections.
In Microsoft Word 2016, the bottom, center of a group refers to the location of a specific alignment option within the Alignment group on the Ribbon. The Alignment group allows users to format text and other elements to appear at different positions within a document. One of the options available is the vertical and horizontal centering of text, often used for titles or important sections to improve readability and presentation.
For example, when you select a block of text and choose the 'Center' alignment in the Alignment group, the content is positioned in the center of the page horizontally, creating a visually balanced document. Similarly, other alignment options such as left, right, and justified are also easily accessible from this group.
Which email etiquette is necessary when composing an email?
. The
must be correctly filled to reflect the
The email must include a courteous greeting and a
purpose or intent of the email.
Answer:
subject, purpose and the recipient details
Explanation:
The email should have a good subject, and that means it should be precise but should convey the purpose and the recipient details. And the detailed report is to be mentioned in the actual body of the email. However, always ensure that the purpose or intent and the recipient details are being mentioned in the subject itself such that the recipient understand in a second the purpose of the email, and also that it meant for him/her.
How do I make a Linked List?
Answer:
Linked list is the list of elements. It is same like array. The elements in the linked list are stored as node. A node of linked list consist of two parts: Data and Address of Next Node. The linked list is the chain of nodes, where all nodes contains the address of the next node.
Explanation:
We can make linked list with the following steps.
1. Create a node, that have two parts Data and Address
2. In data part we insert the data and in address part we insert the null value until new node created.
3. When we create the new node, we insert of that node in previously created node's address section.
This process continues until the nodes are created and added to the list.
Creation of Node
To complete this process we create a structure that has two fields. One is integer type data and other is pointer type.
struct node{
int data;
int * next;
}
John just opened a savings account and wants to maximize the amount of interest he ears. Which of the following actions
would enable him to earn MORE interest?
Selecting an account with a high
interest rate.
Leaving his money in the account for long
period of time.
Transferring money into his checking account
each month.
Both
A &
Answer:
Both A & B
Explanation:
An account with high interest is going to earn you more interest, and also you can earn more interest through leaving the money in the account for a long period. You should know that with checking accounts, you can take care of daily use only, and it provides no or very little interest. And it is the saving bank account that helps you to raise funds for future. And hence the option mentioned in the answer section is the correct one.
Green field country is planning to conduct a cricket match between two teams A and B. a large crowd is expected in the stadium as 10000 tickets have already been sold. To fulfill the viewer's requirements, the match administrators are willing to install large display screens inside the stadium Which should display the match Live through several cameras installed on different angles in the stadium.
After carefully reading and analyzing the given scenario, you are required to suggest the most suitable serial transmission mode with two strong reasons
Answer:
We need the Network Interface Card that supports serial transmission, and they are EIA RS-422A and RS-485 interfaces. Always remember that serial transmission is slower than parallel transmission, but they are less noisy as compared to the parallel transmission. In both of these NICs, we can have one transmitter and multiple receivers over a single line. And the length of the line can be as big as 6000 Feet and speed up to 10 MBPS, which is quite good for this question requirement.
Explanation:
Please check the answer.
The______ technique helps you explode possible risks by providing access to risk areas identified in the past. It also provides the solution that were used an along with the outcomes
The referred technique is a risk evaluation method that involves analyzing past problems and their solutions to predict potential future risks. It involves using historical data, premortem scenarios, event trees, heat maps, and sensitivity analysis to assess and prioritize risks, ultimately aiding in informed decision-making.
Explanation:The technique being referred to is a method that allows practitioners to evaluate risks by reflecting on past experiences. By creating an inventory of past technical problems and how they were addressed, including both the solutions implemented and their outcomes, one can gain insights into potential future challenges. This approach is important for avoiding risks by examining historical data, which often involves selecting well-established methods and technical solutions over untested ones. Additionally, tools like premortem sessions can be useful to explore "what if" scenarios to forecast and prepare for potential risks by anticipating their impacts and likelihood.
When assessing risks, it's common to use models such as event trees, which assign probabilities and outcomes to different scenarios. Ranking risks is typically done with tools like a heat map, while sensitivity analysis helps understand the robustness of solutions given the uncertainty of information. Ultimately, it is vital to engage stakeholders in the decision-making process to ensure that decisions are well-informed and lead to action. This includes considering the digitisation of business models and organising digital resources, especially when starting new projects that entail numerous decision-making situations.
you work for a shipping company and your manager receives orders from various customers everyday some existing ,some new .your manager wishes to establish a process to automate tracking the orders received by the company .you can assume the daily data arrives as lists/array/vector of strings and follows this exact format(note that customers may place separate orders in a single day):
day_i=["Bob:100","Alice:100","Celia:110","Bob:20",etc.]
write a script that, when given the daily data will keep track of purchase amount for each customer. you can assume the data already exists in the memory
Answer:
It's good to consider this as a dictionary, with key-value pair, or as a two-dimensional array.
And in the first case, the code will be as below:
day_i={'Bob':'100', 'Alice':'100','Celia':'110','Bob':'200'}
for k, v in day_i.items():
print(k, v)
Explanation:
The above code reads through each day, and each customer purchase amount in the form of Dictionary, and prints each customer name and purchase amount. And with little enhancement, we can create each day data, and print details of the day, as being asked by the user.
Green Field county stadium is planning to conduct a cricket match between two teams A and B. A large crowd is expected in the stadium as 10000 tickets have already been sold. To fulfill the viewers’ requirements, the match administrators are willing to install large display screens inside the stadium which should display the match “Live” through several cameras installed on different angles in the stadium.
After carefully reading and analyzing the given scenario, you are required to suggest the “most suitable serial transmission mode” with two strong reasons.
Note: format of your answer should be as follow:
Mode Name:
Reason 1:
Reason 2:
Answer:
Half-duplex mode, and for long-distance with the multidrop facility, as screens only need to receive at a time. And this can be ensured through RS-485 or RS-422A. And with RS-485 repeaters implementation, we can construct very long-distance networks with range even more than 4000 feet. RS-422A supports full-duplex mode, and the number of receivers allowed is merely 10, and hence the best option is RS-485. However, it allows till 4000 feet, and if the number of the camera is around 10 or less, then it can also be used. Though it is not multipoint and works on point to point, which is another limitation with it. Hence, the best option is RS-485.
Explanation:
Mode Name: Half Duplex mode ( RS-485)
Reason 1: These uses twisted-pair comprising of two cables, and these noises in one cable are canceled by noise in second, and we get noiseless output ar receiver end. Also, proper grounding through a single point ensures there is no loop current forming due to the ground voltage. and all the other voltages are always referenced to this ground voltage. In general, also note that Ethernet can be converted to RS-485 through a suitable device to form the final required network. However, here RS-485 alone will work fine.
Reason 2: Very large number of receivers are allowed, and that is around 32. And that is definitely going to solve the purpose here.
Note: even if screens use AI and feedback the video footage in realtime, at a time we will need only one to transmit, and hence, the above will work. However, in case of high accuracy through machine learning, the full-duplex will be required, however, that is not a case here. However, RS-232 provides full-duplex connectivity though it is for very short distances. And seeing the baud rates, a half-duplex does provide a very high level of accuracy. For further information, you can check how CCTV cameras are installed these days, as very high-quality Network interface cards and wires, as well as connectors, are available these days. And briefly, 4 wire RS-485 does support full-duplex communication, but remember, that is not a requirement here. And hence the correct option for this question is as mentioned in the answer section.
What are some ways tables can be inserted into a document? Check all that apply.
drawing a table
using a dialog box
using Quick tables
using the Save options
converting an image to a table
adding an Excel spreadsheet
Final answer:
Tables can be inserted into a document by drawing a table, using a dialog box, utilizing Quick Tables, adding an Excel spreadsheet, and converting text to a table. Methods like 'Save options' or 'converting an image to a table' are not common practices for inserting tables.
Explanation:
Tables can be a powerful tool for organizing and presenting data in documents and presentations. There are several methods to insert tables into a document:
Drawing a table: This method allows you to manually draw the table cell by cell, row by row.Using a dialog box: You can insert a table by selecting the number of rows and columns in the Insert Table dialog box.Quick Tables: A gallery of pre-built table templates that can be inserted with just one click.Add an Excel spreadsheet: You can insert a table by embedding or linking to data from an Excel spreadsheet.Convert text to table: If your data is already organized with separators, such as tabs or commas, you can convert it into a table.However, options like using the 'Save options' or 'converting an image to a table' are not typical methods for inserting tables. When using Word or PowerPoint, you can also utilize the Table Tools Design tab to modify and style your table, making it match the theme of your document or presentation.
Final answer:
Tables can be inserted into documents through drawing, using a dialog box, Quick Tables, or by adding an Excel spreadsheet. The 'Save options' are not for table insertion and images are not directly converted into tables in typical software.
Explanation:
There are various methods to insert tables into a document, each serving for different purposes and requirements. Here are some of the ways tables can be inserted:
Drawing a table: This option allows you to manually create the structure of a table by drawing it out.Using a dialog box: By accessing the 'Insert Table' feature through a dialog box, you can specify the number of rows and columns.Using Quick tables: Quick tables are pre-designed table templates that can be inserted into your document for instant use.Adding an Excel spreadsheet: Inserting an existing Excel spreadsheet will create a table with the data and formats retained from Excel.Converting text to table: If your data is separated by commas, tabs, or other delimiters, you can convert it directly into a table format.The Save options are not directly related to table insertion and converting an image directly to a table is generally not a feature of common word processing or presentation software. Modifications and formatting of tables can be done using the Table Tools Design tab, where you can add elements such as shading and borders.
Organize the following steps that occur in the communication process . A. Decode B. Encode C. Store and retrieve D. Transmit E. Receive
Answer:
B. Encode D. Transmit E. Receive A. Decode C. Store and Retrieve
Explanation:
Encode: This phase involves the creation of the information for transmitting. Transmit: This is the phase where the encoded information is sent through a media to it's destination or receiver.
Receive: This is the point of reception.
Decode: This is the phase of trying to understand the Information sent.
Store and Retrieve: This is the feedback phase.
Don is the superintendent of the county school system. What task might Don
perform as part of his job?
A. coaching the junior varsity football team
B. monitoring inventory for the band program
C. cancelling school if there is bad weather
D. teaching trigonometry to high school students
Don as the superintendent of the county school system is able to cancel school if there is bad weather
Further Explanation:
A school superintendent is like the chief operating officer of the county school system. He or she is tasked to run the day to day operations of a school district. A school superintendent falls under the supervision of the executive branch and his or her key responsibility is to hire principals and administrative district staff members. In addition, their other roles are to manage other financial roles. The answer C falls under the operations that Don as the District superintendent needs to take care of. Don has the powers to make decisions in the event of a school emergency like bad weather or incidents that concern the safety of teachers, students, and other staff members.
Learn more about a school superintendent
https://brainly.com/question/9735495
#LearnWithBrainly
Answer:
Canceling school if there is bad weather.
Explanation:
True or False? The steps in the production process vary according to the technological system under consideration.
True, production process steps vary depending on the technological system, as firms adapt to produce output at low costs, adjusting to input costs like labor.
The statement is True. The steps in the production process indeed vary according to the technological system under consideration. This variation is due to the need for firms to seek out production technologies that enable them to produce the desired level of output at the lowest possible cost.
Choices around production technology are critical to a company's success. Depending on the cost of inputs like labor, a firm might choose different levels of automation or different types of machinery. For example, as labor costs increase, a firm might shift from a labor-intensive technology (Production technology 1) to a more capital-intensive one (Production technology 3), reflecting a substitution of labor with machinery.
Brad is joining a big website design firm. He is worried that he may not be able to adapt to the company culture. What can he do to adjust to his new workplace quickly?
Answer with Explanation:
Brad is a newcomer for the company, so it's definitely going to be a challenging transformation for him. Firstly, he should be grateful about landing on the job because not everyone is given the chance to join a big website design firm. Once he cultivates gratitude, he will be able to extract happiness from it. It will also provide him with direction and purpose. In this case, it will be easy for him to adjust to his new workplace. It will fuel his eagerness to have social interactions. He will be able to contribute to a more positive company culture and become a good advocate for the company's core values as well.
This is, probably, the easiest way for Brad to adjust to the new workplace.
Mack has started with his first photographic assignment for a magazine. He has clicked around thirty images and uploaded them on the
magazines website. After three months, he sees two of his images being used on another website. He realizes that he hasn't registered those
two images as per the Copyright law of 1976. What type of damage can Mack recover from the owner of the other website?
A
actual damages
B.
statutory damages
C
actual and statutory damages
no damages
D
Answer:
A actual damages
Explanation:
Mack has already uploaded the two of these images on the website, and hence he now has the copyright for these two images. He is not hence required to register for copyright anywhere else. Keep in mind, the person who posts first has the copyright. However, you will have to apply for copyright if you are not posting it online. However, Mack has posted online, and hence he can ask for the actual damage from the owner of the other website, who published it later. There is nothing statutory for this, and hence no permitted threshold. Mack can challenge the owner to pay the actual amount. However, he can not ask in separate for permitted or the statutory damages. And hence, the correct answer is A. actual damages.
Answer: Actual damages
Bit rate is a measure of how many bits of data are transmitted per second. Compared to videos with a higher bit rate, the same videos with a lower bit rate would most likely have
a 3D effect.
blocky, pixilated motion.
a larger file size.
a smoother flow of motion.
Answer:
blocky, pixilated motion.
Explanation:
Less bits are used to encode every video frame, so depending on the compression algorithm this will result in small areas, blocks, getting the same color, i.e., a blocky, pixelated effect.
Answer:
B
Explanation:
Create the algorithms in both flowchart and pseudocode form for the following two program requirements:
Given 100 item prices in an array called prices[100]. Create an algorithm that calculates the following two results: 1. Find the highest price in the array; and 2. Reduce that price of the highest by 10%
For a user that inputs 3 numbers, output those numbers in ascending order.
Answer:
Hello Brissap2814! This question has 3 parts. The first is asking you to print the highest price from an array of 100 prices. The easiest way to do this is to sort the array in ascending order, so that the highest value of the array becomes the last array element, which you can then simply print to the screen. The second part of the question is asking you to reduce the highest price that you got in the first part of the answer by 10%. Finally, the last part of the question is asking you to prompt a user to input 3 numbers and then print the numbers in ascending order. The requirements are to provide both Flowchart and Pseudocode algorithms for all 3 parts.
Explanation:
1. Print highest price from array prices
Algorithm: Pseudocode
highest_price = prices.sort.last
OR
highest_price = prices.sort[100]
2.
Algorithm: Pseudocode
reduced_price = highest_price – 10%
prices[100] = reduced_price
3.
Algorithm: Pseudocode
// initialize empty array
input_array = []
// loop 3 times
for count in 0..2
prompt user input for number
handle exceptions for non-numeric input
save user input to input_array
end
// sort input array
input_array.sort
print input_array
What are the 3 symbols that can’t be used when saving a document? (From Microsoft Word 2016) (pls helped me!)
Answer:
\, /, -
Explanation:
The three symbols are forward slash, backward slash, and the hyphen. These were allowed in previous versions of the MS Word. However, since the MS Word 2016 and a little earlier, these three symbols have been banned. And you will immediately get a message if you use these, to correct, and only then the file will be saved with that new name, and that must not have the forward or backward slash or the hyphen.