Answer:
Strong nuclear force
Explanation:
As we know that positive charges repel each other so protons do repel each other although atoms are stable because of strong nuclear force acting between nucleons (protons and neutrons in nucleus are called nucleons) which overcome the repulsive force between the proton. Strong nuclear force is very short-range force and acts only in distance of angstrom or picometre.
Report your answer with the proper number of significant figures. magnesium is used in lightweight alloys for airplane bodies and other structures. the metal is obtained from seawater in a process that includes precipitation, neutralization, evaporation, and electrolysis. how many kilograms of magnesium can be obtained from 8.01 km3 of seawater if the initial mg2+concentration is 0.12% by mass? (d of seawater = 1.04 g/ml)
The density given is 1.04 g/mL, or also equivalent to:
density = 1040 kg/m^3
The total mass of seawater is calculated by multiplying density and volume. conversion factor is 1 km = 1000 m:
total mass = (1040 kg/m^3) * (8.01 km^3) * (1000 m / 1 km)^3
total mass = 8.3304 x 10^12 kg
Since Mg2+ is 0.12% by weight, in fraction this is 0.0012 by weight. So:
mass Mg2+ = (8.3304 x 10^12 kg) * 0.0012
mass Mg2+ = 9.996 x 10^9 kg
Which type of rock forms from the fragments of other rocks?
Which properties makes it possible to separate the oxygen and the nitrogen from a sample to liquefied air?
For heavy elements, what is the ratio of neutrons to protons that predicts a stable nucleus?
a) 1:1
b) 1.5:1
c) 2:1
d) 10:5
For heavy elements the ratio of neutrons to protons that predicts a stable nucleus is 1 .5 : 1
The correct option is b. 1.5 : 1
a) 1:1
b) 1.5:1
c) 2:1
d) 10:5
Which is the correct order, from simplest structure to most complex, of these particles?
A. atom, diatomic element, molecule, compound
B. diatomic element, atom, compound, molecule
C. compound, molecule, diatomic element, atom
A. Atom, diatomic element, molecule, compound is the correct order from simplest to most complex structure. Each term represents a different level of molecular complexity in chemistry.
The correct order along with a brief explanation of each term, from the simplest structure to the most complex among the given particles is:
Atom: The basic unit of a chemical element, consisting of protons, neutrons, and electrons. Examples include hydrogen (H) and oxygen (O).Diatomic element: A molecule composed of two atoms of the same element. For instance, O₂ (oxygen) and N₂ (nitrogen).Molecule: A group of two or more atoms bonded together. These can be the same element or different elements, such as O₂ (oxygen) or H₂O (water).Compound: A substance formed when two or more different types of atoms are chemically bonded together. Examples include H₂O (water) and CO₂ (carbon dioxide).1. Describe what is meant by "bridge notation" and explain its value.
This is an essay question.
Sulfur and oxygen form both sulfur dioxide and sulfur trioxide. When samples of these are decomposed, the sulfur dioxide produces 3.45 g oxygen and 3.46 g sulfur, while the sulfur trioxide produces 9.00 g oxygen and 6.00 g sulfur. Calculate the mass of oxygen per gram of sulfur for sulfur dioxide. (IT HAS BEEN 2 YEARS SO I DID THIS, I NEED HELP :( )
To calculate the mass of oxygen per gram of sulfur for sulfur dioxide, determine the molar masses of sulfur and oxygen in each compound and use the given masses of oxygen and sulfur to calculate the ratio.
Explanation:To calculate the mass of oxygen per gram of sulfur for sulfur dioxide, we need to find the molar masses of sulfur and oxygen in each compound. The molar mass of sulfur dioxide is 32.06 g/mol for sulfur and 2 x 16.00 g/mol for oxygen, while the molar mass of sulfur trioxide is 48.06 g/mol for sulfur and 3 x 16.00 g/mol for oxygen. Using the given masses of oxygen and sulfur for each compound, we can then calculate the mass of oxygen per gram of sulfur.
For sulfur dioxide:
https://brainly.com/question/33724112
The total number of protons and neutrons and eletronc in an stom aliver 109 is
A specific isotope of an element is known to have 15 protons and 16 neutrons. which symbol would properly represent this isotope
Final answer:
The isotope with 15 protons and 16 neutrons is represented as ¹31P, where 31 is the mass number and P is the symbol for phosphorus.
Explanation:
The specific isotope in question has 15 protons and 16 neutrons. The element with an atomic number of 15 (number of protons) is phosphorus, symbolized as P. To notate an isotope, we use the element's symbol, with the atomic number as the lower left subscript (often omitted because the element symbol indicates the atomic number) and the mass number as the superscript to the upper left of the symbol. The mass number is the sum of the protons and neutrons. In this case, mass number 31 (15 protons + 16 neutrons). Therefore, the symbol representing this isotope of phosphorus is ¹31P.
What is an easy way to measure the volume of an oddly shaped solid object?
What material is the buddha statue gautama buddha belum caves?
What is the correct scientific notation for 640,000,000? Question 5 options: 6.4X10^8 6.4X10^10 64X10^10 640X10^8
how does the digestion of food involve both physical and chemical change
Where are the alkali metals and alkaline earth metals and halogens and noble gases located in the periodic table?
Which statements about the products of glycolysis is true? (check all that apply)?
Glycolysis produces two ATP, two NADH, and two pyruvate molecules from a single glucose molecule. These pyruvate molecules later enter the citric acid cycle for further processing. Also, glycolysis yields a net gain of two ATP per glucose molecule.
Explanation:The products of glycolysis, a biochemical pathway in cellular respiration, are two ATP molecules, two NADH molecules, and two pyruvate molecules from a single molecule of glucose. Glycolysis begins with the consumption of two ATP for each glucose molecule being broken down but eventually forms four ATP, thus resulting in a net production of two ATP. It does not depend on oxygen, hence occurs both during aerobic and anaerobic respiration. The two pyruvate molecules produced then enter the citric acid cycle (also known as Krebs cycle) for further processing, where they're converted into Acetyl CoA.
Despite a common misconception, the net ATP gain from glycolysis is not zero - while the two ATP are indeed used for transporting the NADH into the mitochondria, this transportation process is considered part of the later stages of respiration, not glycolysis itself. Therefore, it is entirely accurate to say that glycolysis results in a net gain of two ATP molecules per glucose molecule.
Learn more about Glycolysis here:https://brainly.com/question/29604117
#SPJ12
Ionization energy is the minimum energy required to remove an electron from an atom in its ground state. It depends on the position of the elements in periodic table. Which of these elements has highest ionization energy? A) B B) C C) F D) Ne
Answer:
D. Ne
Explanation:
Ne Across a period, increasing nuclear charge outweighs the shielding. So the outermost electrons are held more tightly and ionization energy increases as we go across a period. Ne, being placed at the extreme right end of the second period, has the highest ionization energy among the provided options.
If heat is absorbed by water, what phase change occurs?
A) gas to solid
B) liquid to gas
C) liquid to solid
D) solid to liquid
How many joules of energy are necessary to heat a sample of water with a mass of 46.0 grams from 0.0 Celsius to 100.0 Celsius? (Use 4.184 J/g Celsius for the specific heat of water.)
Type the correct answer to 3 significant digits. If the answer has an exponent, type the number, then ^, then the exponent.
(The question is on the picture.)
To calculate density, both _____ must be measured.
length and volume
length and mass
volume and mass
Volume and Mass
Hope this Helped! :)
How many moles of oxygen (O) atoms are in a sample of 3.98 × 1023 atoms?
Answer : The number of moles of oxygen atoms present in a sample is 0.661 moles.
Explanation :
As we know that,
1 mole of substance contains [tex]6.022\times 10^{23}[/tex] number of atoms.
As we are given that:
Number of oxygen atoms = [tex]3.98\times 10^{23}[/tex]
Now we have to determine the moles of oxygen atoms.
As, [tex]6.022\times 10^{23}[/tex] atoms of oxygen present in 1 mole of oxygen
So, [tex]3.98\times 10^{23}[/tex] atoms of oxygen present in [tex]\frac{3.98\times 10^{23}}{6.022\times 10^{23}}=0.661[/tex] mole of oxygen
Therefore, the number of moles of oxygen atoms present in a sample is 0.661 moles.
Compared with a ph of 7, a solution of ph 5 has what times/fraction of the hydrogen concentration?
A solution with a pH of 5 has 100 times the hydrogen ion concentration compared to a solution with a pH of 7, due to the logarithmic nature of the pH scale.
Explanation:Compared with a pH of 7, a solution of pH 5 has a hydrogen ion concentration that is 100 times greater. The pH scale is logarithmic, meaning that each whole pH unit change corresponds to a tenfold change in hydrogen ion concentration. Therefore, moving from pH 7 to pH 6 increases the hydrogen ion concentration by a factor of 10, and moving again from pH 6 to pH 5 increases it by another factor of 10, thus yielding a total increase by a factor of 100.
What causes different liquids to form layers when they are poured into a container?
Because of the difference in density between the two liquids, the oil layer sits on top of the water. The density of a substance is the ratio of its mass (weight) to its volume. Because oil is less dense than water, it rises to the surface.
What is density ?The density of a substance is its mass per unit volume. The most common symbol for density is, but the Latin letter D can also be used. Density is defined mathematically as mass divided by volume.
The more dense liquids are also heavier and sink to the bottom, while the least dense liquids rise to the top. The liquids separate into layers due to their different densities.
The forces that exist between liquid particles are weaker than the forces that exist between solid particles. This means that liquid particles are closer together and can move more freely. The liquid can flow and take the shape of its container because the particles can move.
Thus, The density of a substance is the ratio of its mass (weight) to its volume. Because oil is less dense than water, it rises to the surface.
To learn more about density, follow the link;
https://brainly.com/question/6107689
#SPJ5
What are the four most common types of materials used to make cooking and baking utensils?
A high temperature state of matter in which atoms lose their electrons
A plasma is a high-temperature state of matter where atoms lose electrons, resulting in a mixture of positively charged ions and free electrons. It is commonly found in stars and laboratories.
A high-temperature state of matter in which atoms lose their electrons is known as a plasma. At elevated temperatures, typically in the range of thousands to millions of degrees Celsius, atoms gain enough energy to ionize, leading to the liberation of electrons. In a plasma, the resulting mixture consists of positively charged ions and free electrons, creating a state of matter distinct from solids, liquids, and gases. Plasmas are pervasive in the universe, constituting a significant portion of celestial bodies like stars. On Earth, plasmas are observed in phenomena such as lightning discharges and certain types of flames.
In laboratories, scientists generate plasmas for diverse applications, including fusion research for energy production, industrial processes like plasma cutting and welding, and technologies such as plasma TVs. The unique properties of plasmas, such as conductivity and responsiveness to electromagnetic fields, make them valuable in various scientific and technological domains. Understanding and harnessing the behavior of plasmas contribute to advancements in both fundamental research and practical applications.
Dalton's atomic theory explained the observation that the percentage by mass of the elements in a compound is always the same, thus dalton's atomic theory supports what law?
a. the law of definite composition
b. the law of conservation of mass
c. the law of conservation of energy
d. the law of multiple proportions
e. the law of chemical compounds
Answer:
The answer are: a. the law of definite composition; b. the law of conservation of mass; d. the law of multiple proportions
Explanation:
Dalton based his atomic theory on two laws: the law of conservation of mass and the law of definite composition.
The law of conservation of mass says that in a closed system, matter is not created or destroyed. For example, if there is a chemical reaction, the amount of each element of that reaction is the same in the reagents and in the products. While the law of defined composition says that a pure compound will have the same proportion of the elements that make it up. An example, salt, which has a chemical formula NaCl, has the same proportion of sodium and chlorine.
The law of multiple proportions, when two elements come together in different proportions to create different compounds, this means that their atoms come together in different numerical relationships. For example, if an atom of an element A joins with two atoms of element B, the weight ratio of the quantities that bind are in a ratio of 1: 2.
True or false: atoms in each state of matter are always in motion
mercury has a mass density of 13.54 g/ml . how many milliliters would 100. grams occupy
The mass of mercury is divided by density.
100 g / 13.54 g/ml = 7.3855 ml
Since, we only have 3 significant digits in 100 and round the result to 3 significant digits. So, 7.3855 ml = 7.39 ml.
How can we calculate the mass from density and volume?Density is defined as the mass per unit volume it means that mass present in 1 meter cube is called density. The S.I unit of density is kg/m^3 and in C.G.S it is gram/cm^3.
So In above question can understand that density, mass, and volume all are convert to each other it means that if we know any two variable then third one will be calculated easily. The S.I unit of density is kg/m^3 and in C.G.S it is gram/cm^3.
Mathematically,
Formula for density will be as mentioned below:-
Density = Mass/Volume.
From above formula we can calculate mass which is as follows:-
Mass = Volume × Density.
S.I unti of mass is kilograms and C.G.S unit is gram.
Therefore, The mass of mercury is divided by density.
100 g / 13.54 g/ml = 7.3855 ml
Since, we only have 3 significant digits in 100 and round the result to 3 significant digits. So, 7.3855 ml = 7.39 ml.
Learn more about density here:
https://brainly.com/question/15164682
#SPJ2
An element belonging to the halogen family would be expected to have a ________ ionization energy and a ________ electron affinity.
What happens when the electron moves from the first energy level to the second energy level?
Energy is absorbed, and an emission line is produced.
Energy is released, and an emission line is produced.
Energy is absorbed by the atom.
Energy is lost from the atom.
Your answer is: Energy is absorbed by the atom.
this is correct hope it helps:)
Which of these orbital designations are invalid? 13.2
a. 4s
b. 3f
c. 2d
d. 3d?
The orbital designations 4s, 3f, and 2d are valid, while 3d is not valid.
Explanation:The orbital designations 4s, 3f, and 2d are valid, while 3d is not valid.
The first part of the orbital designation represents the principal quantum number, which indicates the energy level of the electron. The numbers 1, 2, 3, 4, etc. are all valid principal quantum numbers. So the designations 4s, 3f, and 2d are all valid.The second part of the orbital designation represents the shape of the orbital. The letters s, p, d, and f represent different shapes. However, the letter d represents the shape of the d orbital, not the shape of the 2d orbital. Therefore, 2d is an invalid designation.Lastly, the third part of the orbital designation represents the magnetic quantum number, which indicates the orientation of the orbital. The numbers 0, 1, -1, 2, -2, etc., are all valid magnetic quantum numbers. So the designations 4s, 3f, and 3d are all valid.Learn more about Invalid Orbital Designations here:https://brainly.com/question/35869963
#SPJ12
In the context of atomic structure, the invalid orbital designations are 3f and 2d. At the third energy level, 'd' subshell exists but 'f' doesn't. Similarly, at the second energy level, 'd' subshell doesn't exist. Option b and c
Explanation:In quantum mechanics, orbital designations are used to describe the location and properties of electrons within atoms. They consist of a number that represents the energy level of the electron, and a letter that represents the shape of the orbital (subshell).
Each kind of subshell (represented by s, p, d, f, and continuing onwards alphabetically) exists only from a certain energy level onwards.
The 's' subshell exists from energy level 1 onwards, so 4s is valid.
The 'p' subshell exists from energy level 2 onwards.
The 'd' subshell exists from energy level 3 onwards, so 3d is valid.
The 'f' subshell exists from energy level 4 onwards, so 3f is invalid.
Therefore, orbital designations 3f and 2d are invalid because 'f' and 'd' sublevels do not exist at the 3rd and 2nd energy levels, respectively.
Option b and c
Learn more about Orbital Designations here:https://brainly.com/question/6830597
#SPJ11