D. Lithium or Li has the smallest ionization energy of those listed with an energy of 5,3917.
I hope that helps u!
Lithium (Li) has the smallest ionization energy out of the given elements due to its single valence electron and relatively small nuclear charge, which makes it easier to remove an electron compared to Boron (B), Nitrogen (N), and especially Neon (Ne).
The element with the smallest ionization energy among Nitrogen (N), Neon (Ne), Boron (B), and Lithium (Li) is Lithium (Li). Ionization energy is the energy required to remove an electron from an atom in the gaseous state. Generally, ionization energy decreases as we move down a group in the periodic table because the outermost electron is farther from the nucleus and feels less nuclear attraction. Lithium, being in the first group and the second period of the periodic table, has only a single electron in its outer shell and a smaller nuclear charge compared to the other listed elements, making it easier to remove this electron. In comparison, Neon (Ne), as a noble gas, has a complete valence shell and a larger nuclear charge, resulting in a much higher ionization energy. Boron (B), while higher in ionization energy compared to Lithium, has lower ionization energy than Nitrogen due to having fewer electrons in its valence shell. Nitrogen (N) has a half-filled p subshell, which is relatively stable, raising its ionization energy higher than that of Boron.
What is the volume of 7.25 g of oxygen gas at STP?
Answer:
5.15 L
Step-by-step explanation:
This looks like a case where we can use the Ideal Gas Law to calculate the volume.
pV = nRT Divide both sides by p
V = (nRT)/p
Data:
m = 7.25 g
R = 0.083 14 L·atm·K⁻¹mol⁻¹
T = (0 +273.15) K = 273.15K
p = 1 bar (Note: STP is 1 bar and 0°C)
Calculations:
(a) Moles of O₂
n = m/M
n = 7.25/32.00
n = 0.2266 mol
(b) Volume
V = (0.2266 × 0.083 14 × 273.15)/1
V = 161.3/2.00
V = 5.15 L
The volume of 7.25 g oxygen gas at STP has been 5.075 L.
The oxygen has been assumed to be an ideal gas. The volume of 1 mole of an ideal gas at STP has been 22.4 L.
Volume of Oxygen at STPThe moles of a gas has been given as:
[tex]\rm Moles=\dfrac{Mass}{Molar\;mass}[/tex]
The given mass of oxygen has been 7.25 g.
The molar mass of oxygen has been 32 g.
The moles of oxygen gas have been given as:
[tex]\rm Moles\;O_2=\dfrac{7.25}{32}\\Moles\;O_2= 0.226\;mol[/tex]
The moles of oxygen available has been 0.226 mol.
The volume of 0.226 mole oxygen at STP has been:
[tex]\rm 1\;mol=22.4\;L\\0.226\;mol=0.226\;\times\;22.4\;L\\0.226\;mol=5.075\;L[/tex]
The volume of 7.25 g oxygen gas at STP has been 5.075 L.
Learn more about volume at STP, here:
https://brainly.com/question/11676583
The requirements of atoms to be able to participate in hydrogen bonding with a hydrogen atom include all of the following except A. atoms must not be able to closely approach the hydrogen. B. atoms must be electronegative. C. atoms must have one lone pair of electrons. D. atoms must be small.
B. atoms must be electro negative.
Answer:
The answer is A.
Explanation:
This is a specific type of polar interaction that is established between two atoms with high electronegativity, usually between O or N, and an atom of H. In the case of oxygen, with a total of 8 electrons, two pairs of solitary electrons are presented and can act as acceptors of two hydrogen bridges. Nitrogen has one less electron and therefore has only one pair of solitary electrons to form a hydrogen bridge. These orbitals have a high negative charge density, and can, therefore, bind to the positive charge of hydrogen.
The interatomic distance between the hydrogen and the acceptor is less than the sum of its Van der Waals radius. The atomic radius of N and O are relatively small.
Have a nice day!
What air moves horizontally or parallel to the ground?
Wind, air that moves to the ground
Which two factors does the power if a machine depend on
A. work and distance
B. force and distance
C. work and time
D. time and distance
The definition of mechanical power is
Power = (work done) / (time to do the work).
From that definition, it looks pretty much like the power of a machine
depends on work and time.
Answer:
c. work and time
Explanation:
c is right on plato
HURRY 10 POINTS!!!
Earth’s magnetic field is formed mostly by:
A. Molten iron alloy
B. solar wind
C. solar plasma
what is a chemical change?
Chemical change accurs when a substance changes form like liquid to solid.
Structural formulas are like models because they show _[blank]_.
Which answer best completes this statement?
a condensed way of writing a compound
how elements arrange within a compound
how electrons arrange within a compound
the three-dimensional shape of a compound
The correct option is:
how elements arrange within a compound
Structural formula are like models because they show how elements arrange within a compound.
What is the number if electrons in the outermost energy level of an oxygen atom?
2
8
4
6
6 is the number of electrons in the outermost energy level of an oxygen atom.
So the correct answer would be six.
Hope this helps,
Davinia.
1) What is the mole ratio of D to A in the generic chemical reaction? (2 points) Page 390 helps with understanding mole ratios. Be sure you’re only looking at the ratio of D to A. You can ignore B & C. 2A+ B C + 3D
Answer:- The mole ratio of D to A is 3:2.
Explanations:- Mole ratio for a chemical equation is the ratio of the coefficients of the molecules. Coefficients are the numbers used to balance the chemical equations.
For the given generic chemical equation, the coefficient of molecule A is 2 and the coefficient of D is 3. It means 2 molecules of A react with 3 molecules of D. So, the mole ratio of A to D is 2:3.
Since, we are asked about the mole ratio of D to A so we will write the coefficient of D first and hence the mole ratio of D to A is 3:2.
Discuss the shapes of s- orbitals, p-orbitals and d-orbitals.
The azimuthal quantum number (l) determines its orbital angular momentum and describes the shape of the orbital.
s-orbitals (for example 1s, 2s) are spherically symmetric around the nucleus of the atom.
p-orbitals are dumb-bell shaped. l = 0,1...n-1, when l = 1, that is p subshell.
d-orbitals are butterfly shaped.
A child is male because he has one X chromosome and one Y chromosome where did these chromosomes come from
it would come from your mom and dad
Early models of our solar system were usually based on experimentation
the best science of the time
the discoveries
of the best scientists
philosophy and religion
Based on the question and the given data, philosophy and religion.
what is happening with the valence electrons of two atoms in a covalent bond?
A pair of oxygen atoms can form an O2 molecule in which each atom has a total of eight valence electrons by sharing two pairs of electrons. The term covalent bond is used to describe the bonds in compounds that result from the sharing of one or more pairs of electrons.
Which of the following types of electromagnetic waves has a frequency greater than ultraviolet waves?
A) X rays
B) infrared waves
C) microwaves
D)visible light
Answer:
A) X-rays
Step-by-step explanation:
Ultraviolet rays have a frequency range of 10¹⁵ Hz to 10¹⁷ Hz.
X-rays have a frequency range of 10¹⁷ Hz to 10²⁰ Hz, so they have a higher frequency than UV waves.
B) is wrong. The frequency range of infrared light is 10¹³ Hz to 4 × 10¹⁴ Hz.
C) is wrong. The frequency range of microwaves is 3 ×10¹¹ Hz to 10¹³ Hz.
D) is wrong. The frequency range of microwaves is 4 ×10¹⁴ Hz to 7.5 × 10¹⁴ Hz.
The X-rays has a frequency greater than ultraviolet waves.
• The range of all the kinds of electromagnetic radiation is known as the electromagnetic spectrum.
• The types of the electromagnetic waves, which makes up the electromagnetic spectrum are the visible light, microwaves, infrared light, UV rays, X-rays, and gamma rays.
• The energy of the waves is directly proportional to its frequency and inversely proportional to their wavelengths.
• The radiowaves exhibits the photons with least energies, followed by microwaves, infrared rays, visible, UV rays, X-rays, and the most energetic of all the waves is the gamma rays.
• The wavelengths of the UV rays is smaller than infrared waves, microwaves, and visible light, however, it is greater than X-rays and gamma rays.
• Thus, the frequencies of UV rays is more than the infrared waves, microwaves, and visible light, but is lesser than the frequencies of X-rays and gamma rays.
Thus, of the mentioned options, X-rays will possess greater frequency than UV rays.
To know more about:
https://brainly.com/question/12692206
How do nonmetals conduct electricity? well . by giving up electrons . poorly . better than metals.
Usually poorly, especially at room temperature for most of them. The gases do not conduct. Some that are marginally non metals (silicon germanium and graphite) conduct passably well but do not conduct as well as copper or silver.
Non metals do not have easily freed electrons and that is why they do not conduct electricity.
Please fill out all of table!!
1) Alkali metals - s block; one valence electron; lose one valence electron; charge of an ion +1.
Alkali metals have electronegativity from 0.7 to 1, lowest in Periodic table of elements, which means that alkali metals (I group in Periodic table) has positive oxidation number in compounds.
Electronegativity is a chemical property that describes the tendency of an atom to attract a shared pair of electrons towards itself.
For example, sodium (Na) is an element with atomic number 11 and it has one valence electron (3s¹) like all alkaline metals.
Electron configuration of sodium atom: ₁₁Na 1s² 2s² 2p⁶ 3s¹.
2) Alkaline earth metals - s block; two valence electrons; lose two electrons; charge of an ion is +2.
Beryllium, magnesium,calcium and strontium are alkaline earth metals. The elements have very similar properties. Alkaline earth metals have in common an outer s- electron shell (two electrons).
For example, atomic number of calcium is 20, it means that it has 20 protons and 20 electrons, so atom of calcium is neutral.
Electron configuration of calcium atom: ₂₀Ca 1s² 2s² 2p⁶ 3s² 3p⁶ 4s²; calcium has two valence electrons (4s²).
3) Boron group - p block; three valence electrons; lose three electrons; charge of metal ions is +3; no nonmetals in this group; none.
For example, boron is an element with atomic number 5, which means it has 5 protons and 5 electrons, bcause atom has neutral charge.
Electron configuration of boron: ₅B: 1s² 2s² 2p¹, it has three valence electrons in 2s and 2p orbitals.
Atomic number is the number of protons, which is characteristic of a chemical element.
4) Carbon group - p block; four valence electrons; lose two or four electrons; charge of metal ions is +2 or +4; nonmetals gain four electrons; charge of nonmetals is -4.
Carbon (C), silicon (Si), germanium (Ge), tin (Sn), lead (Pb) and flerovium (Fl) are in group 14 of Periodic table. They have same number of valence electrons (four) and similar chemical properties.
For example, carbon is a chemical element with symbol C and atomic number 6, which means it has 6 protons and six electrons. Valence electrons are in 2s and 2p orbitals.
Electron configuration of carbon atom: ₆C 1s² 2s² 2p².
5) Nitrogen group - p block; five valence electrons; lose three or five electrons; charge of metal ions is +3 or +5; nonmetals gain three electrons; charge of nonmetals is -3.
Nitrogen (N), phosphorus (P), arsenic (As), antimony (Sb), bismuth (Bi) and moscovium (Mc) are in group 15 of Periodic table. They have same number of valence electrons (five).
For example, bizmuth (Bi) has atomic number 83, it has 83 protons and 83 electrons. Valence electrons are in 6s and 6p orbitals.
Electron configuration of bizmuth atom: ₈₃Bi [Xe] 4f¹⁴ 5d¹⁰ 6s² 6p³.
6) Oxygen group - p block; six valence electrons; lose four or six electrons; charge of metal ions is +4 or +6; nonmetals gain two electrons; charge of nonmetals is -2.
Oxygen (O), sulfur (S), selenium (Se), tellurium (Te) and the radioactive element polonium (Po) are in group 16 of Periodic table. They have same number of valence electrons (six).
For example, electron configuration of oxygen atom: ₈O 1s² 2s² 2p⁴.
Oxygen atom has six valence electrons (2s² 2p⁴), so it is in 16 group of Periodic table of elements.
7) Halogens - p block; seven valence electrons; nonmetals gain one electron; charge of nonmetals is -1.
Halogen elements are in group 17: fluorine (F), chlorine (Cl), bromine (Br) and iodine (I). They are very reactive and easily form many compounds.
Halogens need to gain one electron to have electron cofiguration like next to it noble gas.
For example, fluorine has 9 electrons and it gain easily one electron in chemical reaction to have electron configuration like noble gas neon (Ne) with 10 electrons.
Electron configuration of fluorine: ₉F 1s² 2s² 2p⁵.
8) Noble gases - p block; eight valence electrons (except helium with two valence electrons); do not gain or lose electrons; none.
Noble gases (group 18) are in group 18: helium (He), neon (Ne), argon (Ar), krypton (Kr), xenon (Xe) and radon (Rn). They have very low chemical reactivity.
Noble gases have very stable electron configuration and does not need to gain electrons, only when they gain energy .
Helium has atomic number 2, it has 2 protons and 2 electrons.
Electron configuration of helium atom: ₂He 1s².
Electron configuration of krypton atom:
₃₆Kr 1s² 2s² 2p⁶ 3s² 3p⁶ 3d¹⁰ 4s² 4p⁶.
The term “ average atomic mass “ is a ______average so is calculator different Lee from a normal average
Average atomic mass of an element is a sum of the product of the isotope mass and its relative abundance.
For example: Chlorine has 2 isotopes with the following abundances
Cl(35): Atomic mass = 34.9688 amu; Abundance = 75.78%
Cl(37): Atomic mass = 36.9659 amu; Abundance = 24.22 %
Average atomic mass of Cl = 34.9688(0.7578) + 36.9659(0.2422) =
= 26.4993 + 8.9531 = 35.4524 amu
Thus, the term “ average atomic mass “ is a weighted average so it is calculated differently from a normal average
Two 20.0-g ice cubes at –15.0 °C are placed into 265 g of water at 25.0 °C. Assuming no energy is transferred to or from the surroundings, calculate the final temperature, Tf, of the water after all the ice melts. heat capacity of h20(s) is 37.7j/kmol. heat capacity of h20(l) is 75.3j/kmol. enthalpy of fusion of h20 is 6.01j/kmol.
Answer:
10.3 °C
Step-by-step explanation:
This is an isolated system so
heat gained by ice + heat lost by water = 0
Heat to warm ice + heat to melt ice + heat to warm melt + heat lost by water = 0
q₁ + q₂ + q₃ + q₄ = 0
n₁C₁ΔT₁ + n₁ΔH_fus + n₁C₃ΔT₃ + n₄C₃ΔT₄ = 0
Step 1: Calculate q₁
n₁ = 40.0 g × 1/18.02
n₁ = 2.220 mol
C₁ = 37.7 J·K⁻¹mol⁻¹
ΔT₁ = T_f – T_i
ΔT₁ = 0.0 – (-15)
ΔT₁ = 15 °C = 15 K
q₁ = 2.220 × 37.7 × 15
q₁ = 1255 J
q₁ = 1.255 kJ
===============
Step 2. Calculate q₂
ΔH_fus = 6.01 kJ·mol⁻¹
q₂ = 2.220 × 6.01
q₂ = 13.34 kJ
===============
Step 3: Calculate q₃
C₃ = 75.3 J·K⁻¹mol⁻¹
ΔT₃ = T_f – T_i = x – 0 °C
ΔT₃ = x °C = x K
q₃ = 2.220 × 75.3 × x
q₃ = 167x J
q₃ = 0.167x kJ
===============
Step 4. Calculate q₄
n₄ = 265 × 1/18.02
n₄ = 14.71 mol
ΔT₄ = T_f – T_i = x – 25.0 °C
q₄ = 14.71 × 75.3 × (x – 25.0)
q₄ = 1107 × (x – 25.0)
q₄ = 1107x – 27 680 J
q₄ = 1.107x – 27.68 kJ
===============
Step 5. Solve for x
1.255 + 13.34 + 0.167x + 1.107x - 27.68 = 0
1.274x - 13.08 = 0
1.274x = 13.08
x = 13.08/1.274
x = 10.3 °C
The final temperature is -10.3 °C.
Give the electron configuration for the chloride ion. (please show the process!) =)
Answer:- [tex]1s^22s^22p^63s^23p^6[/tex]
Explanations:- Atomic number of chlrone(Cl) is 17 it means it has 17 electrons. It's electron configuration is: [tex]1s^22s^22p^63s^23p^5[/tex] .
Chloride ion is formed when Cl accepts one electron:
[tex]Cl+e^-\rightarrow Cl^-[/tex]
So, electrons for the chloride ion = 17+1 = 18
If we look at the electron configuration of Cl then 3p is still vacant as there are 5 electrons in it and it could have maximum 6 electrons. So, this 18th electron goes to 3p and the electron configuration of chloride ion becomes:
[tex]1s^22s^22p^63s^23p^6[/tex] .
What does graphite contain that is similar to metals
which of the following elements has the highest first ionization energy? strontium calcium magnesium or beryllium
Beryllium.
ExplanationAll four elements are found in the second column to the left of a periodic table. They are group 2 elements.
The 1st ionization energy generally decrease down each group.
Elements in each group have the same number of electrons in the outermost occupied electron shell. Electrons in the inner shell shield those in the outer shell from attractions from the nucleus, known as the shielding effect. The number of protons in each atom increase by more than 8 in each period. However, due to this effect, electrons in the outermost shell experience a far weaker force pulling them towards the center of the atom. For atoms of the four group 2 elements, electrons in the outermost layer would behave as if there's only two protons inside their nucleus. As a result, their end up with rather similar ionization energies.
Despite the same effective charge on each electron, the mean radius of the electrons increase down the group. Beryllium is in the second period; its electrons occupy only two electron shells in the ground state. On the contrary, strontium is in the fifth period; its electrons occupy up to five electrons shells in its ground state. The strength of electrostatic attraction decreases as the two charges move apart. As a result, outermost electrons in beryllium are way more attached to the nucleus than those in strontium.
FYI, the 1st ionization energy of the four elements are shown below:
Be: 899.50 kJ/molMg: 737.750 kJ/molCa: 589.830 kJ/molSr: 549.470 kJ/molThe element with the highest first ionization energy among the choices is; Beryllium, Be
The ionization energy of an element is the energy required to remove one of the electrons in its outermost shell.
The first ionization energy of elements is inversely proportional to the atomic radii of elements.
This is so because a lesser atomic radius corresponds to greater electrostatic attraction between the electron and the nucleus of the atom.
We must also state that the atomic radius of elements in the periodic table increases down a group and decreases across a period.
In essence, the smaller the atom of an element, the larger is its first ionization energy.
Strontium --Period 6, group 1Calcium --Period 4, group 2Magnesium --Period 3, group 2Beryllium -- period 2, group 2The element with the highest first ionization energy is the smallest element and is therefore Beryllium, Be.
Read more:
https://brainly.com/question/18355536
in the process of electricity, what flows through the wires?A) protons B)neutronsC)electronsD)positrons
Electrons is your answer
Answer: C.
electrons
Explanation: edmentum
Iron(III) oxide is formed when iron combines with oxygen in the air. How many grams of Fe2O3 are formed when 33.4 g of Fe reacts completely with oxygen?
Molar Mass information: Iron = 55.8 g/mol, Oxygen= 15.9 g/mol
The grams of Fe₂O₃ that are formed is 47.68 g
calculation
Step 1: write the equation for reaction
4 Fe +3O₂ → 2 Fe₂O₃
Step 2: find the moles of Fe
moles = mass÷ molar mass
= 33.4 g÷55.8 g/mol =0.5986 moles
Step 3 : use the mole ratio to determine the moles of Fe₂O₃
That is from equation above Fe:Fe₂O₃ is 4:2 therefore the moles of Fe₂O₃ is = 0.5986 moles x 2/4 =0.2993 moles
Step 4 : find the mass of Fe₂O₃
mass = mass x molar mass
The molar mass of Fe₂O₃ = (55.8 x 2 +(15.9 x3) = 159.3 g/mol
mass is therefore = 0.2993 moles x 159.3 g/mol =47.68 g
Answer:
47.8 g
Explanation:
Answer the following for the reaction: 3AgNO3(aq)+Na3PO4(aq)→Ag3PO4(s)+3NaNO3(aq)
1. How many milliliters of a 0.255 MAgNO3 solution are required to react with 31.1 mL of 0.135 MNa3PO4 solution?
2. How many grams of silver phosphate are produced from the reaction of 23.0 mL of a 0.195 MAgNO3 solution and excess Na3PO4?
Answer:1) Volume of [tex]AgNO_3[/tex] required is 55.98 mL.
2) 0.62577 grams of [tex]Ag_3PO_4[/tex] is produced.
Explanation:
[tex]3AgNO_3(aq)+Na_3PO_4(aq)\rightarrow Ag_3PO_4(s)+3NaNO_3(aq)[/tex]
1) Molarity of [tex]AgNO_3,M_1=0.225 M[/tex]
Volume of [tex]AgNO_3.V_1=?[/tex]
Molarity of [tex]Na_3PO_4,M_2=0.135 M[/tex]
Volume of [tex]Na_3PO_4,V_2=31.1 mL=0.0311 L[/tex]
[tex]Molarity=\frac{\text{number of moles}}{\text{volume of solution in liters}}[/tex]
[tex]\text{number of moles }Na_3PO_4=M_2\times V_2=0.135 mol/L\times 0.0311 L=0.0041985 moles[/tex]
According to reaction, 1 mole of [tex]Na_3PO_4[/tex] reacts with 3 mole of [tex]AgNO_3[/tex], then, 0.0041985 moles of [tex]Na_3PO_4[/tex] will react with:
[tex]\frac{3}{1}\times 0.0041985[/tex] moles of [tex]AgNO_3[/tex] that is 0.0125955 moles.
[tex]M_1=0.225 M=\frac{\text{number of moles of }AgNO_3}{V_1}[/tex]
[tex]V_1=\frac{0.0125955 moles}{0.225 M}=0.05598 L=55.98 mL[/tex]
Volume of [tex]AgNO_3[/tex] required is 55.98 mL.
2)
[tex]Molarity=0.195 M=\frac{\text{number of moles}}{\text{volume of solution in liters}}[/tex]
Number of moles of [tex]AgNO_3=0.195\times 0.023 L=0.004485 moles[/tex]
According to reaction, 3 moles of [tex]AgNO_3[/tex] gives 1 mole of [tex]Ag_3PO_4[/tex], then 0.004485 moles of [tex]AgNO_3[/tex] will give:[tex]\frac{1}{3}\times 0.004485[/tex] moles of [tex]Ag_3PO_4[/tex] that is 0.001495 moles.
Mass of [tex]Ag_3PO_4[/tex] =
Moles of [tex]Ag_3PO_4[/tex] × Molar Mass of [tex]Ag_3PO_4[/tex]
= 0.001495 moles × 418.58 g/mol = 0.62577 g
0.62577 grams of [tex]Ag_3PO_4[/tex] is produced.
What is the Lewis structure for H2Se
Abdid is an astronomer who has been observing objects that orbit the sun in the Astro belt . He finds a previously undiscovered round rocky object that is not similar in shape to the rest of the asteroids what has abdid most likely found
Since it is round, and in the asteroid belt, he has most likely found a Dwarf planet. This is because it is round, so it might be round because of it's gravity.
Answer:
A. a new dwarf planet
Explanation:
When hydrochloric acid reacts with potassium hydroxide solution, the following reaction occurs. HCl (aq) + KOH (aq) H2O (l) + KCl (aq) The reaction gives off heat energy, so it is an reaction.
A reaction that gives off heat energy is called Exothermic. (Answer).
A reaction that absorbs heat from the surroundings is called endothermic.
Answer: Exothermic
Explanation:
Exothermic reactions are defined as the reactions in which energy of the product is lesser than the energy of the reactants. The total energy is released in the form of heat and [tex]\Delta H[/tex] for the reaction comes out to be negative.
Endothermic reactions are defined as the reactions in which energy of the product is greater than the energy of the reactants. The total energy is absorbed in the form of heat and [tex]\Delta H[/tex] for the reaction comes out to be positive.
[tex]HCl(aq)+NaOH(aq)\rightarrow KCl(aq)+H_2O(aq)[/tex] is an example of neutralization as acid and base combines to form salt and water and exothermic reaction as it releases heat in the reaction.
A _____ is a mountain created from eruptions of lava, ash, rocks, and hot gases.
Valcano i your answer i believe
an air sample consists of 99.6% of nitrogen-14 and 0.4% of nitrogen-15. what is the average mass of nitrogen in this sample?
The average mass of nitrogen is 14
calculation
step 1 : multiply each percentage by mass number
14 x 99.6 =1394
15 x 0.4 = 6
Step 2: add them up
1394 + 6 = 1400
step 3: Then divide by 100
= 1400/100 = 14
Answer:The average atomic mass of nitrogen is 14.004
Explanation:
Abundance of nitrogen-14 = 99.6 %
Fractional abundance[tex]=\frac{99.6}{100}=0.996[/tex]
Abundance of nitrogen-15 = 0.4 %
Fractional abundance[tex]=\frac{0.4}{100}=0.004[/tex]
Average atomic mass of an element =
[tex]\sum(\text{atomic mass of an isotopes}\times (\text{fractional abundance}))[/tex]
Average atomic mass of nitrogen =
[tex]14\times 0.996+15\times 0.004amu=14.004[/tex]
The approximate atomic mass of nitrogen is 14.004
Is Fe2O3+H2--2Fe+3H2O balanced or unbalanced?
hydrogen is not balanced
the right balanced equation is
Fe2O3 + 3 H2 -> 2Fe + 3H2O