Main Section
8)
Base your answer on the diagram and information below and on your knowledge of biology.
The diagram represents a germinating bean seed that has been split open.
Bean plant
embryo
Seed
coat
Stored
starch
Germinating bean seed
(split open)
Plants are able to continue to grow and develop once the starch supply in the seed is gone,
because they
A)
develop roots to absorb starch from the environment
Summary
B)
grow leaves, which use light energy for cell respiration
C)
have chloroplasts and use light energy to make more food
D
produce more seeds, which contain additional food reserves

Answers

Answer 1
Final answer:

Plants are able to continue growing once the starch supply in the seed is spent because they (option C)have chloroplasts. These chloroplasts use absorbed light energy during photosynthesis to create more food, which facilitates the plant's continued growth and development.

Explanation:

Based on the information and diagram provided, once the starch supply in the seed is exhausted, plants continue to grow and develop due to their capacity to perform photosynthesis. This is represented by option C. Photosynthesis is a process in chloroplasts where plants use light energy to make more food. The plant begins to grow leaves that can absorb sunlight. The light energy is then used to convert water and carbon dioxide into glucose, which serves as a source of energy and a building block for plant growth.

Learn more about Photosynthesis here:

https://brainly.com/question/29764662

#SPJ12

Answer 2
Final answer:

After the germinating seed's stored starch is used up, the plant can continue growing by using photosynthesis. This process, facilitated by chloroplasts in plant cells, converts light energy, water, and carbon dioxide into sugar for energy.

Explanation:

The process you are asking about is related to photosynthesis, which is one way that plants can continue to grow even after their stored starch is gone. The correct option from the ones given is C. Plants have chloroplasts and use light energy to make more food.

Life starts for a plant when the germinating seed uses the stored starch for energy to start growing. Once this stored food supply runs out, the plant must find a new source of nutrients, so the plant begins the photosynthesis process. This process involves the chloroplasts found in plant cells using light energy, usually from the sun, to convert water and carbon dioxide into glucose, which is a type of sugar that the plant can use for energy.

Learn more about Photosynthesis here:

https://brainly.com/question/29764662

#SPJ12


Related Questions

what is an organelle?

Answers

Answer:

A small structure within the cell that serves speciallzed functions.

Hope this helps

:D

Answer:

A. A small structure within the cell that serves specialized funtions.

Explanation:

Which statement accurately describe soil?

Answers

Soil condition directly affects crop growth.

Soil is used faster than it is replaced.

The destruction of soil can take just minutes.

Soil cannot be replaced in a short time.

Answer: All.

Explanation:

Changes in organisms is a result of which of the following factors?


(A.) Humans and nature


(B.) Time


(C.) Both are correct


(D.) Neither are correct​

Answers

A) humans and nature

Final answer:

Organisms change due to a combination of human activities and natural processes, which include both abiotic and biotic environmental factors. These changes occur over time and are influenced by genetic mutations and the dynamics of evolution, impacting all levels of biological organization.

Explanation:

The changes in organisms are a result of both human activities and natural processes, which include abiotic and biotic factors. For example, changes can occur due to the gradual effects of environmental factors over time, such as climate and the availability of resources, as well as through direct human actions like selective breeding. Genetic mutations and the dynamics of evolution also play significant roles in how organisms change. These changes can be seen at various biological levels, including cells, populations, and ecosystems, and they are the result of complex interactions that organisms have with their environment.

Moreover, the development of organisms is influenced by their external and internal environments, leading to growth and changes in their homeostasis. Lastly, events and processes such as succession in ecological communities also demonstrate the impact of both time and environmental factors on organismal change.

Which process is shown in the diagram?
A) translation
B)transcription
C)removal of non coding regions
D) copying

Answers

The answer is A) Translation

Final answer:

The process shown in the diagram is transcription, where DNA is copied into RNA.

Explanation:

The process shown in the diagram is transcription. Transcription is the process by which the information contained in a DNA sequence is copied into an RNA molecule. Removal of non coding regions pertains to the process where introns (non-coding regions) are removed from the primary mRNA transcript to produce the final mRNA. Copying usually refers to DNA replication, a process where a DNA molecule is copied to generate two identical DNA molecules.

Learn more about transcription here:

https://brainly.com/question/32921071

#SPJ6

Which of the following tells you population density?
the number of people per square kilometer
the number of frogs in a pond
the number of births per year
the number of deaths per year

Answers

The presence of individuals within a species in a specific geographic location is referred to as population density. It is in other words, the number of people per square kilometer.

What are the methods listed to calculate population density?

The population density can be calculated in three types and different methods used show various information about the pressure that the population exerts on the land.

The three methods are:

Arithmetic.Physiological.Agricultural.

The population density is the number of people per square kilometer.

Thus, the correct option is A.

For more details regarding population density, visit:

https://brainly.com/question/16894337

#SPJ2

Final answer:

Population density is defined as the number of people per square kilometer, so this is the answer that tells you about population density. The other answers may give information on other aspects, but not directly on population density.

Explanation:

The population density of a place is defined as the number of people per square kilometer. It is a measure of how crowded a certain area is, meaning it gives an average number of people living per unit of area. The number of frogs in a pond, births per year, or deaths per year do not directly tell you about population density. Instead, these details may give you information about the natural resources, birth rate, and death rate respectively. Therefore, the answer to your question, 'Which of the following tells you population density?', would be the number of people per square kilometer.

Learn more about Population Density here:

https://brainly.com/question/11411999

#SPJ6

Igneous rocks that cool more quickly have smaller mineral crystals, while igneous rocks that cool more slowly have larger mineral crystals.

How would a rock that formed from lava cooling on the Earth's surface compare with a rock that formed from magma cooling deep in the Earth's crust?

A. The rock that formed from lava would have larger crystals than the rock that formed from magma.

B. Crystal size would be very small and identical in both rocks.

C. Crystal size would be very large and identical in both rocks.

D. The rock that formed from lava would have smaller crystals than the rock that formed from magma.

Answers

Lava is a volcanic rock which cools above ground fairly quickly so it yields many small crystalline structures. Magma is plutonic and cools very slowly under the crust. So it yields few large crystals. That means the answer is D.

Answer:

D. The rock that formed from lava would have smaller crystals than the rock that formed from magma.

Explanation:

The volcanic rocks, effusive or, more rarely, extrusive are those igneous rocks that were formed by the cooling of lava on the earth's surface1 or magma (mass of underground molten matter) at shallow depths.

The rapid cooling of magma or lava that turns into volcanic rock causes many small crystals, also called microcrystals or fine grains, to form on these rocks. Rapid cooling can also form volcanic rocks composed entirely or partially of glass.3 The most common volcanic rocks on Earth are basalt followed by andesite, while other volcanic rocks are rhyolite, dacite and trachyte to mention a few. .

Volcanic rocks constitute a small part of the rocks that originate from magma. It is estimated that during the Cenozoic an annual average of 3.7 to 4.1 km³ of volcanic rocks have been generated on Earth, a much smaller amount than the 22.1 to 29.5 km³ of plutonic rocks that are believed to have formed on average annually in the same period of time. weather.

why is a lake with a clay bottom able to hold more water than a lake with a sand bottom​

Answers

Answer:

Clay is the least porous of all soil types. It is the opposite of porous in comparison to sand.

What kind of pollution was the most abundant in the US national parks? How did this pollution affect park wildlife and ecosystems?

Answers

Answer:

The most prominent kind of pollution during 1989 was air pollution, as several of the country's national parks were hiding behind the air pollution curtains. The pollution started to decline biodiversity as various species were vacating the polluted regions for the cleaner ones, as they were not able to thrive in such circumstances. Due to this some plants even died like Jeffrey pine trees in Sequoia. The biological diversity was at threat as scientists had observed that acid rain and ozone depletion were making the things even worse.

Final answer:

The most abundant pollution in US national parks has been air and water pollution due to industrialization, increased population, and urbanization. This pollution affects aquatic life and can lead to 'dead zones', the reduction of biodiversity, and habitat destruction. Air pollution contributes to the deterioration of air and soil quality, causing harm to both animal and plant life.

Explanation:

The most abundant pollution in the US national parks has historically been a mix of air and water pollution. Industrialization, increased population, and urbanization have been the major sources of this pollution. In fact, in 1969, water pollution was so dire that the Cuyahoga River in Ohio actually caught fire.

These forms of pollution have significant impacts on park wildlife and ecosystems. Pollutants in the water can harm aquatic life, creating 'dead zones' unable to support life. As these pollutants travel up the food chain, they can harm predators that consume the affected organisms. Over time, the accumulation of water and air pollution can lead to habitat destruction and reductions in biodiversity.

In the case of air pollution, elements like lead and other harmful chemicals from the burning of fossil fuels can contaminate the air and soil, leading to the degrading health of both animals and plant life. The impacts of these forms of pollution are long-lasting and damage the natural beauty of these protected areas.

Learn more about Pollution in National Parks here:

https://brainly.com/question/12725271

#SPJ11

Which technique would use dna from and extinct species to recreate an organism of the species

Answers

Answer:

The woolly mammoth (Mammuthus primigenius) is a candidate for de-extinction using either cloning or genome editing.

What is the term used to describe the distance between objects?
A.
line
B.
contrast
ISHED
c.
space

Answers

Answer:

Space describes the distance between objects

A, because anything that is in this world has space, for example in a ballon.

how long is a day on Kepler 62f (length of day in earth time)

Answers

Answer:

122 days I think

Explanation:

Gene splicing is used to produce

Answers

Answer:

Often used to produce the product Insulin

Explanation:

Google

A vertical feeding pattern is _____.

Answers

A vertical feeding pattern is a way for animals to avoid competition.

Answer:

a way for animals to avoid competition

Explanation:

What are some of the possible consequences (effects) or shon
ecological change?

Answers

Short-term human ecological change is caused by habitat destruction, deforestation, wildlife hazards, pollution and non-sustainable harvesting. ... Deforestation, climate change/global warming, ozone layer destruction, and the mass-extinction of plant and animal species. Not sure about your question, but I hope this helped

Read the questions below. Check all of the nonscientific questions.

How many calories will I use if I swim for thirty minutes?

What is the outer part of a cell called?

What influence do hormones have on emotions?

Why do people in my neighborhood have more cats than dogs?

How can the position of stars and planets be used to predict the future?

How are plants at higher elevations likely to be affected by climate change?

Answers

Final answer:

Nonscientific questions include those about neighborhood pet preferences and astrology. Scientific plausibility involves looking for evidence and reproducibility. Physics deals with universal laws, whereas biology focuses on the diversity of life.

Explanation:

Nonscientific Questions

Regarding the questions listed, the following are nonscientific questions:

Why do people in my neighborhood have more cats than dogs?How can the position of stars and planets be used to predict the future?

Evaluating Scientific Plausibility

To decide whether a report about spirit forces influencing the weather is scientifically plausible, one could ask:

What evidence supports the claim?Can the influence be measured or observed in controlled conditions?Has this phenomenon been replicated in multiple studies?

Science and Free Will

If "science" suggests free will is an illusion, it wouldn't necessarily be wise to start behaving like a machine as human behavior is complex and influenced by a multitude of factors, not just neurological determinism. Personal experience and societal norms play significant roles in how we behave.

Differences Between Physics and Biology

While both physics and biology utilize scientific thinking, physics often focuses on universal laws that apply to all matter and energy. In contrast, biology deals with the diversity of life, its processes, and the many variables that can affect living organisms.

Which molecules are used to produce glucose during the calvin cycle?

A. ADP and NADP+
B. ATP and NADPH
C. Chlorophyll and Oxygen
D. Carbon Dioxide and Water​

Answers

Answer:

B. ATP & NADPH

Explanation:

fruits and vegetables are full of energy. Energy in the form of glucose. The energy from sunlight is briefly held in NADPH and ATP, which is needed to drive the formation of sugars such as glucose.

As Melvin Calvin discovered, carbon fixation is the first step of a cycle. The Calvin cycle transfers energy in small, controlled steps. Each step pushes molecules uphill in terms of energy content. Recall that in the electron transport chain, excited electrons lose energy to NADPH and ATP. In the Calvin cycle, NADPH and ATP formed in the light reactions lose their stored chemical energy to build glucose.

Final answer:

The Calvin Cycle uses ATP and NADPH to produce glucose. These energy carrying molecules are created during the light reactions of photosynthesis.

Explanation:

To produce glucose during the Calvin Cycle, the molecules ATP (Adenosine Triphosphate) and NADPH (Nicotinamide Adenine Dinucleotide Phosphate) are utilized. These two molecules are vital energy carriers and are produced during the light reactions of photosynthesis. The energy they carry is used to convert carbon dioxide which is absorbed by the plant into glucose (a type of sugar). For example, substances like Glyceraldehyde-3-phosphate (GA3P) are produced as part of the Calvin Cycle. GA3P is effectively half a glucose molecule and through two cycles of the Calvin Cycle one molecule of glucose is generated utilizing the energy from ATP and NADPH.

Learn more about Calvin Cycle here:

https://brainly.com/question/34149547

#SPJ3

Which of the following places the types of sediment in order from smallest to largest?

A. Silt, sand, clay, cobble, pebble, boulder
B. Clay, silt, sand, pebble, boulder, cobble
C. Clay, silt, sand, pebble, cobble, boulder
D. Silt, clay, sand, pebble, boulder, cobble

Answers

Answer: C

Why?

I know for sure that the largest sediment in the list is the boulder. There are only two options with a boulder as the greatest (A and C). The reason it can’t be A is because the pebble is the second biggest sediment. That is definitely not true. The order of C seems the most correct.

60 POINTS AND BRAINLIEST IF ANSWERED WITH EXPLANATION



_____ produce and secrete antibodies.


macrophages


phagocytes


B lymphocytes


T lymphocytes

Answers

Answer:

B lymphocytes

Explanation:

Soooo B lymphocytes, are a type of white blood cell of the lymphocyte subtype. They function in the humoral immunity component of the adaptive immune system by secreting antibodies.

Answer:

B lymphocytes

Explanation:

The graph here shows the carrying capacity for two populations of salmon living in different ecosystems. Which of these is most likely to be more plentiful in area B than in area A?

Answers

Answer: Disease

Explanation:

The graph here shows the carrying capacity for two populations of salmon living in different ecosystems:Area A has more food resources than area B.Hence the answer is option D.

What is salmon?Salmon is the common name for several species of ray-finned fish in the family Salmonidae. Other fish in the same family include trout, char, grayling, and whitefish. Salmon are native to tributaries of the North Atlantic and Pacific Ocean.

The graph here shows the carrying capacity for two populations of salmon living in different ecosystems:Area A has more food resources than area B.Hence the answer is option D.

To learn more about Salmon refer:https://brainly.com/question/21118009

#SPJ2

idl this plzz help EASY!!!
Using the Doppler effect, astronomers can determine a star’s ____.
temperature
chemical composition
movement toward or away from Earth
age

Answers

Answer:

The answer is movement toward or away from Earth.

In astronomy, it is said that the Doppler effect tells Astronomers whether a star, or galaxy, is approaching or going away from us. It turns out the farther a galaxy is away, the faster it gets away from us - meaning that the Universe is expanding.

hope this helps :)

The answer is a movement toward and away from earth

Hope this helps .please add brainlist

What tells a ribosome how to assemble a protein?
O A. DNA
O B. Pheromones
O C. Golgi apparatus
O D. Vesicles

Answers

Answer:

DNA

Explanation:

A. DNA a ribosome how to assemble a protein

Ribosomes get their orders for protein synthesis from the nucleus, where portions of DNA (genes) are transcribed to make messenger RNAs (mRNAs).

An mRNA travels to the ribosome, which uses the information it contains to build a protein with a specific amino acid sequence.

What is the structure responsible for assembling a protein?

Endoplasmic reticulum is a network of membranes inside a cell through which proteins and other molecules move. Proteins are assembled at organelles called ribosomes.

To learn more about DNA, refer

https://brainly.com/question/1000326

#SPJ2

Why is Charles Darwin's work a good example of how observations can help lead to good scientific questions???



AND THIS IS SCIENCE QUESTION.

Answers

Hi

Charles Darwin was the founder of Eveolution, and he had to conduct many observations to be sure of his conclusions, until he finally came up with the theory of evolution, which is that every anumal evolves over time slowly depending on the changes in the genes.

That is why Charles Darwin is a good example of how observations can lead to great scientific questions...

Hope this helped you

Have a blessed day :-)

Charles Darwin saw that tortoises on each Galapagos island (these islands had drastically different environments) were all different. Darwin observed that all the tortoises had different shells that helped with there survive in each unique environment. He wondered why this was the case and how tortoises from islands so close could be drastically different. This lead him to theorize the famous theory of natural selection. That environment effect survival for the ones who are the best suited for it.

Does this help?

In the last ice age, most of Alaska was _____.

part of the Mammoth steppe

moving toward Europe

underwater

covered by ice

Answers

i believe the answer would be covered by ice.

During the last ice age, most of Alaska was covered by ice due to large ice sheets. Human migration from Siberia to Alaska was facilitated by lower water levels. Option d is correct.

During this time, large ice sheets covered parts of North America, including Alaska, due to the Earth being in the most recent ice age.Humans were able to migrate from Siberia to Alaska by crossing over the land bridge between the continents that had been revealed by dropping sea levels as massive glaciers formed all over the world.This migration occurred as a result of lower water levels during the Ice Age, allowing for the connection between Asia and North America through the Bering Strait, forming the basis for human settlement in Alaska.

Complete question as follows:

In the last ice age, most of Alaska was _____.

a. part of the Mammoth steppe

b. moving toward Europe

c. underwater

d. covered by ice

Why is heating and cooling necessary when doing the pcr method?

Answers

A PCR is used to amplify DNA. The heating breaks the hydrogen bonds and ensures that the double-stranded DNA helix is melted such that the two strand separate. The cooling ensures that the introduced DNA primers bind with the single strands so that elongation of the chain (to form a new double helix) can be possible by DNA polymerase.

1)Clouds return the water in the cycle when it?
A)rains
B)condenses

2)evaporated water forms into?
A)mist
B)clouds

3)the first step of the water cycle is that water ____into the air
A)condenses
B)evaporates

Pls ❤️

Answers

The answers to the questions are as follows:

1) Clouds return the water in the cycle when it A) rains.

2) Evaporated water forms into B) clouds.

3) The first step of the water cycle is that water B) evaporates into the air.

1) The water cycle involves several stages, one of which is the formation of clouds. Clouds are formed when water vapor in the air condenses into tiny droplets or ice crystals. This process typically occurs when air cools to its dew point, and the water vapor can no longer remain in a gaseous state. However, the question asks when clouds return the water in the cycle. This happens when the water droplets or ice crystals in the clouds become too heavy and fall to the ground as precipitation, which includes rain, snow, sleet, or hail. Therefore, the correct answer is A) rains.

2) When water evaporates from the Earth's surface, it turns from a liquid to a gas (water vapor). This water vapor rises into the atmosphere and cools, leading to condensation. The condensed water vapor forms tiny droplets that cluster together to form clouds. Therefore, the correct answer to the question about what evaporated water forms into is B) clouds.

3) The water cycle begins with the evaporation of water from the Earth's surface, which includes oceans, lakes, rivers, and even soil. The sun's energy causes water to change from a liquid to a gas, a process known as evaporation. This is the first step in the water cycle, where water B) evaporates into the air. Once in the atmosphere, water vapor can condense to form clouds, which eventually lead to precipitation, falling back to the Earth's surface to continue the cycle.

what happens when an electrical gradient and a chemical gradient are applying opposite forces to active transport?
A) they strengthen each other
B) they negate each other
C) they triple the strength of each other
D) they weaken the power of each gradient by half

Answers

Answer:

Option B, they negate each other

Explanation:

Electrical gradient force is more or less equal to the chemical gradient during an active transport. The number of electron produced during the establishment of chemical gradients, were transferred through the cellular circuit to produce electrical gradient of an equivalent amount in opposite path.

Thus, both electrical and chemical gradient are opposite to each other and hence they negate out each other.

Option B

Answer:

B) they negate each other

Explanation:

The combined effects of electrical and chemical gradients lead to  the formation of an electrochemical gradient. This simply means  that both an electrical gradient and a chemical gradient can have an  effect on the movement of substances, and that their effects may  combine (the chemical and electrical gradients encourage  movement in the same direction), or they may negate (one gradient  opposes another).

Hope this helps!! Thank you! (✿◠‿◠)

Why do the terrestrial planets lack hydrogen and helium in their atmospheres?

A. Hydrogen and helium were converted to other compounds as the planets formed.
B. Hydrogen and helium can't be retained because the planet masses are too small.
C. Hydrogen and helium were blown away by solar wind.
D. Hydrogen and helium are present in rings around the terrestrial planets.

Answers

Answer:

B

Explanation:

Mostly, terrestrial planets (which are mainly made up of rocks) are usually smaller in size and therefore have lower mass, in comparison to gas planets. An example, in our solar system, is Saturn and Jupiter are bigger than Earth, Mercury and Venus. Due to their low mass, their gravitational pull is not strong enough to retain an atmosphere of very light gas such as hydrogen and helium. These terrestial planets can retain heavier gas such as carbon dioxide and oxygen.

The terrestrial planets lack hydrogen and helium in their atmospheres because hydrogen and helium were blown away by solar wind.

The correct option is (C).

Why it is difficult for terrestrial planets to retain hydrogen and helium?

Terrestrial planets have a solid planetary surface, which distinguishes them from larger gaseous worlds.

Terrestrial planets are nearest to the sun, so the temperature in these planets are high.

Due to high temperature, hydrogen, and helium gases are blown away.

Hydrogen and helium are very light gases, that's why always go upside away from surface.

Thus, option (C) solar winds blow away hydrogen and helium is correct.

Learn more about terrestrial planets, here:

https://brainly.com/question/486164

What are the two parts of the peripheral nervous system? A. the somatic and autonomic nervous systems B. the cerebrospinal fluid and meninges C. the cerebrum and cerebellum D. the brain and spinal cord

Answers

Answer:

A. the somatic and autonomic nervous systems

Explanation:

The two parts of the peripheral nervous system are the somatic and autonomic nervous systems

Answer:

Somatic and autonomic nervous systems.

Explanation:

The peripheral nervous system includes all the parts other than the central nervous system. The main functions of this system is to connect the central nervous system with the other system of the body.

The peripheral nervous system has been divided into the the autonomic nervous system and  somatic nervous system . Autonomic nervous system control the involuntary actions of the body further divided into two more systems that helps in the fight and flight mechanism of the body. Somatic nervous system controls the voluntary action of the body.

Thus, the correct answer is option (A).

Punnett squares depict the genotypes of two parents and are used to predict the inherited traits of offspring. Which of the following would be the missing predicted trait in the table below?

Answers

The correct answer would be OO.

I Hope this helps!

Answer:

OO

Explanation:

Each square represents a segregated outcome. The missing square is a cross between O and O and could only produce OO, which would be known as simply O.

Simple diffusion is an example of what kind of cellular transport?

Answers

It is called passive transport not active transport

Other Questions
Trig help pleaseFind the exact value of each trigonometric equation A piece of blue paper appears blue because the papera. reflects all colors of light except blueb. absorbs all colors of light except bluec. refracts all colors of light except blued. is transparent to all colors of light except blue Which of the following statements regarding membrane function is false? The plasma membrane has receptors for chemical messages. The plasma membrane forms a selective barrier around the cell. The plasma membrane is the control center of the cell. The plasma membrane plays a role in transferring signals to the cell's interior. The plasma membrane creates compartments within the cell. Which best describes the Northern European Plain?A. an area of soft rolling hills and flat valleysB. an area of plateaus and dry basinsC. an area of low plateaus and high mountainsD. an area of relatively flat and low-lying land Due to ever-changing technology, a new XYZ Smartphone decreases in value 20% each year. 1. How much will this $1000 phone be worth in 2 years? 2. How long until it is worth less than 10% of it's original price? The Math Club raised money for its spring banquet by washing vehicles. The club charged $3 per car and $5 per truck. The club earned a total of $510 for washing 122 cars and trucks combined. How many cars did the club wash? 1. Although generally not considered to be alive, a is studied alongside other microbes such as bacteria. 2. The protein coat that surrounds the nucleic acid of a virus is called a . 3. The is a viral life cycle that results in bursting of the host cell. 4. The is a viral life cycle in which the virus inserts its genome into the genome of its host, where it may remain dormant for long periods. 5. A is a viral genome that has inserted itself into the genome of its host. 6. A is a virus that specifically infects bacteria. What does the yellow star in the picture represent How much heat energy is added to 2 grams of water if the initial temperature was 40C and the final temperature is 50C? (The specific heat of water is 4.18 J/gC). ASAP if you can-What Is Energy?A- a change that appears in an object when force is appliedB- the property of a body that gives it massC- The amount of heat produced by a bodyD- The ability of an object to undergo changeE- The ability of a body to move Which statement demonstrate that government considered busing to be a successful way to make sure schools were integrated? Check all that apply Which ratio represents sin A?A)817B)1517C)1715D)178 Choose the correct answer. The collection of investments in a mutual fund is called a . which answers are equivalent to Q + p + Q + p + Q Which of the following is NOT an indicator of a chemical change? color change change in volume temperature changes gas formation Solve the simultaneous equation 2x+5y=29, 3x+5y=-19 Find the value of x in this figure. Based on arrow movement why is the front shown in item A different from the front shown in item B? ** WILL MARK BRAINLIEST ** Which term is used to describe the reactant that is not used up completely in a chemical reaction? A. Catalytic reactantB. Excess reactantC. Limiting reactantD. Theoretical yield Security is called because there is a disruptive person in the ER. When security arrives, they find a young man sitting silently in a chair. They grab the man and begin to yell at him for being disruptive. This is an example of __A. ineffective communication because it involved a ER patient who is not well B. effective communication because the patient was disruptiveC. Ineffective communication because it involved aggression D. Effective communication because the security guard needed to take control of the situation before others got annoyed Steam Workshop Downloader