Answer: The value of [tex]x_1,x_2,x3\text{ and }x_4[/tex] are 2, 3, 12 and 6 respectively.
Explanation:
Law of conservation of mass states that mass can neither be created nor be destroyed but it can only be transformed from one form to another form. This also means that total number of individual atoms on reactant side must be equal to the total number of individual atoms on the product side.
A balanced chemical equation always follow this law.
For the given chemical reaction, the balanced equation follows:
[tex]2C_6H_6+3O_2\rightarrow 12C+6H_2O[/tex]
By Stoichiometry of the reaction:
2 moles of benzene reacts with 3 mole of oxygen gas to produce 12 moles of carbon and 6 moles of water
From the above reaction:
[tex]x_1=2\\x_2=3\\x_3=12\\x_4=6[/tex]
Hence, the value of [tex]x_1,x_2,x3\text{ and }x_4[/tex] are 2, 3, 12 and 6 respectively.
The balanced equation for the complete combustion of benzene is 2C6H6 + 15O2 → 12CO2 + 6H2O, which means x1=2, x2=15, x3=12, and x4=6.
Explanation:The complete combustion of benzene (C6H6) forms carbon dioxide (CO2) and water (H2O). To balance the chemical equation for this reaction, each atom on the reactant side must be equal to the total number of the same atom on the product side. The chemical equation for the combustion of benzene is:
2C6H6 + 15O2 → 12CO2 + 6H2O
Here, x1 is 2, x2 is 15, x3 is 12, and x4 is 6. Hence, the balanced chemical equation is 2 moles of benzene reacting with 15 moles of oxygen to produce 12 moles of carbon and 6 moles of water.
Explain 1 way compounds of binary ionic and binary covalent substances are similar, as well as 2 ways in which they differ.
Answer:
Answer in explanation
Explanation:
The similarity between binary ionic and binary covalent substances is that they both contain only 2 elements each. This means there are two elements in the configuration of both. That is the similarity between them
Now the first difference I will like to mention is the way in which they are bonded. While ionic substances are formed through the transfer of electrons, covalent substances are formed through the sharing of electrons. This means that an element with an excess number of electrons transfer completely a number of electrons to an element that is deficient in electrons. This can be seen in the case of sodium and chlorine. The electron that is transferred is controlled only by the nucleus of the second electron. In the covalent bonding however, the electrons are shared and the electrons shared are controlled by the nuclei of both elements
Another difference is that while binary ionic compounds might dissolve only in polar solvents such as water, binary covalent compounds might only dissolve in non polar solvents such as benzene.
Answer:
Similarity: they involve the presence of both a cation and an anion.
Differences:
1. Electron giving is done in ionic compounds and electrons sharing is done in covalent compounds.
2. Stronger interactions in ionic compounds while weak interactions in covalent compounds.
Explanation:
Hello,
In this case, one similarity present between ionic and covalent compounds is that both of them involve the presence of both a cation and an anion which are positive and negative respectively; this is in order to allow the contituents to gather by bonding either ionically or covalently.
On the flip side, on the difference is that ionic compounds involve the giving of electrons since usually just the anion attain the octet while the covelent compounds allow electron sharing to allow both the cation and the anion to attain the octet.
Nevertheless, despite the electron sharing and giving fact, ionic compounds have stronger interactions bonding the cation and the anion than those covalent compounds have. Ionic interactions are electrostatic and covalent interactions are attractive which are by far weaker than those electrostatic.
Best regards.
A 15.85g piece of iron absorbs 1086.75 joules of heat energy and its temperature changes from 25 degrees Celsius to 175 degrees celcius. Calculate the specific heat capacity of iron.
Answer:
Explanation:
Specific heat capacity of iron is the amount of heat required to raise 1g of iron by 1 degree Celsius.
The formula is Q=mc∆T
Where Q is energy in joules.
M is mass in gram.
C is specific heat capacity in J/g°C.
∆T is change in temperature in degree Celsius
Q=1086.75joules
M=15.85g
C=?
∆T = final T-initial T(175-25)=150°c.
Q=Mc∆T
1086.75= 15.85×C×150
1086.85=2377.5c
C=1086.85÷2377.5
C=0.46J/g°C.
What volume of a 0.22 m silver nitrate solution is required to precipitate all the cl− ion in the solution as agcl?
To calculate the volume of silver nitrate solution required to precipitate all the Cl- ions as AgCl, use the concentration of Cl- ions in the solution and the stoichiometric ratio between Ag+ and Cl- ions. The volume of solution is equal to the volume of the silver nitrate solution.
Explanation:To calculate the volume of a 0.22 M silver nitrate solution required to precipitate all the Cl- ions as AgCl, we need to determine the stoichiometric ratio between Ag+ and Cl- ions in the reaction. Since the balanced equation is Ag+ + Cl- → AgCl, the ratio is 1:1. We can use the concentration of Cl- ions in the solution to determine the volume of the silver nitrate solution needed.
The concentration of Cl- ions in the solution is reduced to half its initial value when AgNO3 and NaCl solutions are mixed. Given a concentration of 2.0 × 10^-4 M, after mixing, it becomes 1.0 × 10^-4 M. To calculate the volume of silver nitrate solution required, we can use the following equation:
Volume (L) = moles of Cl-/concentration of Cl-
Let's assume the volume of silver nitrate solution required is V liters: V = (moles of Cl-) / (1.0 × 10^-4 M)
To determine the moles of Cl-, we can use the equation:
moles of Cl- = concentration of Cl- × volume of solution (in liters)
Substituting the given concentration and volume:
moles of Cl- = 1.0 × 10^-4 M × V
Now, substituting the value of moles of Cl- in the volume equation:
V = (1.0 × 10^-4 M × V) / (1.0 × 10^-4 M)
This simplifies to V = V, meaning the volume of silver nitrate solution required to precipitate all the Cl- ions is equal to the volume of the solution.
Learn more about Volume of silver nitrate solution required to precipitate Cl- ions here:https://brainly.com/question/36099986
#SPJ12
To precipitate all the Cl- ions in a 0.22 M silver nitrate solution as AgCl, an equal volume of the solution is required.
Explanation:In order to determine the volume of a 0.22 M silver nitrate solution required to precipitate all the Cl- ions as AgCl, we can use stoichiometry. The equation for the reaction is:
Ag+ + Cl- → AgCl
From the balanced equation, we can see that 1 mole of AgCl is formed for every 1 mole of Cl- ions. Given the concentration of the silver nitrate solution, we can use the equation M1V1 = M2V2 to solve for the volume of the solution required.
Let V be the volume of the silver nitrate solution. Using the equation M1V1 = M2V2:
(0.22 M)(V) = (0.22 M)(V/2)
Simplifying the equation, we get:
V = V/2
Therefore, in order to precipitate all the Cl- ions, you would need to use an equal volume of the silver nitrate solution.
https://brainly.com/question/22881810
#SPJ12
The hormone that directly controls water reabsorption by the kidneys is
Answer:
It is called an antidiurectic hormone
What were the learning goals of this lab experiment? Check all that apply.
to use mass and temperature data to do computations involving heat
to demonstrate that different reactions have different enthalpies
to compute a reaction’s enthalpy directly using mass measurements and a calorimeter
to compute the enthalpy of a reaction that cannot be measured directly using a simple calorimeter
Answer:
a abd b
Explanation:
Answer:
all of them
Explanation:
correct on edge
At 700C (1290F), what is the maximum solubility
(a) of Cu in Ag? (
b) Of Ag in Cu?
Answer:
(a) 4 %; (b) 5 %
Explanation:
We need a Cu-Ag phase diagram to answer these questions (see diagram). Yours may differ slightly from the one I used.
(a) Cu in Ag
The horizontal red line at 700 °C cuts the right-hand solvus at about 4 % Ag-96 % Cu.
At this point, copper is in equilibrium with the eutectic.
At 700 °C, the maximum solubility of Cu is about 4 % by mass.
(b) Ag in Cu
The horizontal red line at 700 °C cuts the left-hand solvus at about 5 % Cu-95 % Ag.
At this point, silver is in equilibrium with the eutectic.
At 700 °C, the maximum solubility of Ag is about 5 % by mass.
In this exercise we have to calculate the maximum of each component in the solution:
a) 4%
b) 5%
We need a Cu-Ag phase diagram to answer these questions (see diagram). Yours may differ slightly from the one I used.
(a) Cu in Ag
The horizontal red line at 700 °C cuts the right-hand solvus at about 4 % Ag-96 % Cu.
At this point, copper is in equilibrium with the eutectic.
At 700 °C, the maximum solubility of Cu is about 4 % by mass.
(b) Ag in Cu
The horizontal red line at 700 °C cuts the left-hand solvus at about 5 % Cu-95 % Ag.
At this point, silver is in equilibrium with the eutectic.
At 700 °C, the maximum solubility of Ag is about 5 % by mass.
Learn more: brainly.com/question/16461028
Write the molecular and net ionic equations for the reaction in aqueous solution of sulfuric acid with excess lithium hydroxide.
Answer:
[tex]H_2SO_4_{(aq)}+2LiOH_{(aq)}\rightarrow H_2O_{(l)}+Li_2SO_4_{(aq)}[/tex]
[tex]2H^+_{(aq)}+2OH^{-}\rightarrow H_2O_{(l)}[/tex]
Explanation:
Complete ionic equation : In complete ionic equation, all the substance that are strong electrolyte and present in an aqueous are represented in the form of ions.
Net ionic equation : In the net ionic equations, we are not include the spectator ions in the equations.
Only the species which are present in aqueous state dissociate.
Spectator ions : The ions present on reactant and product side which do not participate in a reactions. The same ions present on both the sides.
(a)
The balanced molecular equation will be,
[tex]H_2SO_4_{(aq)}+2LiOH_{(aq)}\rightarrow H_2O_{(l)}+Li_2SO_4_{(aq)}[/tex]
The complete ionic equation in separated aqueous solution will be,
[tex]2H^+_{(aq)}+SO_4^-_{(aq)}+2Li^+_{(aq)}+2OH^{-}_{(aq)}\rightarrow H_2O_{(l)}+2Li^+_{(aq)}+SO_4^-_{(aq)}[/tex]
In this equation the species present are, [tex]Li^+\text{ and }SO_4^-[/tex] are the spectator ions.
Hence, the net ionic equation contains specie is
[tex]2H^+_{(aq)}+2OH^{-}\rightarrow H_2O_{(l)}[/tex]
What is the correct numerical setup for calculating the final volume of the helium gas sample?
Answer:
This question is incomplete. But the completed question is below
A sample of helium gas is in a closed system with a movable piston. The volume of the gas sample is changed when both the temperature and the pressure of the sample are increased. Where the initial temperature of the gas is 200K, initial pressure is 2.0 atm, initial volume is 500 mL, the final temperature is 300K and the final pressure of the gas sample is 7.0 atm.
What is the correct numerical setup for calculating the final volume of the helium gas sample?
P₁V₁/T₁ = P₂V₂/T₂ will be used in calculating the final volume.
And the final volume is 214.29 mL
Explanation:
The general gas equation will be used to calculate the final volume. The general gas equation is
P₁V₁/T₁ = P₂V₂/T₂
From the question
P₁ = 2.0 atm
T₁ = 200K
V₁ = 500 mL
P₂ = 7.0 atm
T₂ = 300K
V₂ = unknown
Hence, we have
2 × 500/200 = 7 × V₂/300
V₂ = [tex]\frac{2 * 500 * 300}{200 * 7}[/tex]
V₂ = 214.29 mL
The final volume of He gas sample has been 214.285 mL.
Helium has been assumed to be an ideal gas. The final volume of the gas with an increase in pressure has been given by:
[tex]\dfrac{P_1V_1}{T_1}=\dfrac{P_2V_2}{T_2}[/tex]
Where, the initial pressure of gas, [tex]P_1=2\;\text{atm}[/tex]
The final pressure of gas, [tex]P_2=7\;\text{atm}[/tex]
The initial volume of gas, [tex]V_1=500\;\text{ml}[/tex]
The initial temperature of gas, [tex]T_1=200\;\text K[/tex]
The final temperature of gas, [tex]T_2=300\;\text K[/tex]
Substituting the values for the final temperature of He, [tex]V_2[/tex]:
[tex]\dfrac{2\;\times\;500}{200}=\dfrac{7\;\times\;V_2}{300}\\\\\dfrac{2\;\times\;500}{200}\;\times\;\dfrac{300}{7} = V_2\\\\V_2=214.285\;\rm ml[/tex]
The final volume of He gas has been 214.285 mL.
For more information about the volume of gas, refer to the link:
https://brainly.com/question/1323061
The spontaneous reaction that occurs when the cell in the picture operates is as follows: 2Ag+ + Cd(s) ???? 2 Ag(s) + Cd2+ (A) Voltage increases. (B) Voltage decreases but remains > zero. (C) Voltage becomes zero and remains at zero. (D) No change in voltage occurs. (E) Direction of voltage change cannot be predicted without additional information. Which of the above occurs for each of the following circumstances? 14. A 50-milliliter sample of a 2-molar Cd(NO3)2 solution is added to the left beaker. 15. The silver electrode is made larger. 16. The salt bridge is replaced by a platinum wire. 17. Current is allowed to flow for 5 minutes.
Answer:
14. B 15. D 16. C 17. B
Explanation:
The spontaneous reaction that occurs when the cell operates is shown below:
[tex]2Ag^{+} + Cd_{(s)}[/tex] ⇒[tex]2Ag_{(s)} + Cd^{2+}[/tex]
We need to select the correct option from the list below for the following questions.
(A) Voltage increases. (B) Voltage decreases but remains > zero. (C) Voltage becomes zero and remains at zero. (D) No change in voltage occurs. (E) Direction of voltage change cannot be predicted without additional information.
14. A 50-milliliter sample of a 2-molar [tex]Cd(NO_{3})_{2}[/tex] solution is added to the left beaker.
If a 50-milliliter sample of a 2-molar [tex]Cd(NO_{3})_{2}[/tex] solution is added to the left beaker, the voltage decreases but its value remains greater than zero. The correct option is B
15. The silver electrode is made larger.
If the silver electrode is made larger, no change in the value of the voltage since we don't have the idea of the initial value. The correct option is D.
16. The salt bridge is replaced by a platinum wire.
If the salt bridge is replaced by a platinum wire, there will be no passage of electrons because electrons can't pass through a platinum wire. Therefore, the voltage will be zero and remains at zero. The correct option is C.
17. Current is allowed to flow for 5 minutes.
If current is allowed to flow for 5 minutes, the voltage decreases but its value remains greater than zero. The correct option is B.
A galvanic cell produces energy by a spontaneous redox reaction.
In galvanic or voltaic cell, energy is produced via a spontaneous redox reaction. The redox reaction equation of this reaction is; 2Ag^+ + Cd(s) ---> 2 Ag(s) + Cd^2+.
The answers to the questions are as follows;
14) When we add 50-milliliter sample of a 2-molar solution of cadmium nitrate, the voltage will decrease but remains greater than zero.
15) The voltage will remain the same after the increase in the size of the silver electrode because its initial value is unknown.
16) The voltage will remain at zero if the salt bridge is replaced by a platinum wire since current can not pass through
17) The voltage will decrease if current flows for five minutes.
Learn more about galvanic cell: https://brainly.com/question/25606438
Apply solubility rules of inorganic slats to predict the occurance of precipitation reactions?
Explanation:
An ionic solution is when a compound's ions in an aqueous solution have dissociated. As you combine two aqueous solutions, a reaction occurs. This is when you find out whether or not a precipitate is going to form. A precipitate occurs when the ion reaction component in water is insoluble.The formation of a precipitate is an indication that a chemical change has occurred. for example if we mix clear solutions of silver nitrate and sodium chloride, sodium nitrate is formed which is a precipitate.
Zeke is on spring break. He lives in a cold climate, so he decides to drive to a warmer climate. Before he leaves for his vacation, he checks the air pressure in his tires. After a few days of driving, he reaches his destination and stops for more fuel. While fueling up, he checks his tires' air pressure again and notices it has increased.
Which option best explains the change in the air pressure of Zeke's tires? Select all that apply.
a. The warmer temperatures at Zeke's destination caused the volume of air in his tires to decrease.
b. The warmer temperatures at Zeke's destination caused the volume of air in his tires to increase.
c. The warmer temperatures at Zeke's destination caused the pressure in his tires to spread out equally.
d. The warmer temperatures at Zeke's destination caused the pressure in his tires to increase.
Answer:
The answers are
The warmer temperatures at Zeke's destination caused the pressure in his tires to increase.
The warmer temperatures at Zeke's destination caused the pressure in his tires to increase.
The warmer temperatures at Zeke's destination caused the pressure in his tires to spread out equally.
Explanation:
The smallest units of matter that normally CANNOT be broken down are atoms. molecules. cells. phospholipids.
Answer: atoms
Explanation:
All matter is made up of smaller indivisible particles called atoms. These atoms are the smallest units of matter ACCORDING to the Dalton's Atomic theory.
Molecules are combined atoms, while cells and phospholipids are complex combination of atoms.
Therefore, atoms is the answer
Choose the following statements that show evidence for a chemical reaction.
1. Dropping sodium metal into water produces fizzing
2. Dissolving a white powder in solution gives white light
3. Mixing two aqueous solutions produces a precipitate
4. Mixing two 10.0 mL solutions gives a volume of 19.5 mL
Explanation:
A chemical reaction is defined as the reaction in which bonds between the reactants either break or form which leads to the formation of a new substance.
For example, [tex]2Li + Cl_{2} \rightarrow 2LiCl[/tex]
So, when we drop a sodium metal into water then it produces a frizzing sound which shows the metal is reacting with water.
We know that when two aqueous solutions chemically react with each other then it may lead to the formation of an insoluble substance which is known as precipitate.
This means that formation of a precipitate is also a chemical reaction.
Thus, we can conclude that following are the statements which show evidence for a chemical reaction.
Dropping sodium metal into water produces fizzing.Mixing two aqueous solutions produces a precipitate.The information below refers to six isotopes. How many elements are represented in this group of isotopes?Atomic number Mass number
19 39
6 13
6 12
19 41
82 207
82 206
Answer:
There are 3 elements (6;12) (19;39) and (82;207)
There are 3 isotopes (6;13) (19;41) and (82;206)
Explanation:
Step 1:
Isotopes have the same atomic number but a different mass number
The element with number 19 is Potassium
Potassium has a mass number of 39 g/mol
This is the element potassium and is not an element
41C has mass number of 41 g/mol and is an isotope
The element with number 6 is carbon
Carbon has a mass number of 12 g/mol
13C has a mass number of 13 g/mol and is an isotope
The element with number 82 is lead
Lead has a mass number of 207 g/mol
206Pb has a mass number of 206 g/mol and is an isotope
There are 3 elements (6;12) (19;39) and (82;207)
There are 3 isotopes (6;13) (19;41) and (82;206)
Hydrogen is unique among the elements because ________. 1. It is not really a member of any particular group. 2. Its electron is not at all shielded from its nucleus. 3. It is the lightest element. 4. It is the only element to exist at room temperature as a diatomic gas. 5. It exhibits some chemical properties similar to those of groups 1A and 7A.
Hydrogen is unique due to several factors: it doesn't belong definitively to any group, its electron is unshielded from its nucleus, it is the lightest element, it exists as a diatomic gas at room temperature, and it exhibits properties of both alkali metals and halogens.
Explanation:Hydrogen is indeed unique among the elements for several reasons. Firstly, it is not really a member of any particular group on the periodic table. It is often placed with Group 1A (the alkali metals) because it has one electron in its outer shell like them, but it also exhibits properties similar to Group 7A (the halogens), as it needs one more electron to complete its shell. Secondly, its electron is not at all shielded from its nucleus, resulting in an unusual level of interaction between the two. Thirdly, hydrogen is the lightest element, which impacts its physical and chemical properties. Fourthly, it is the only element to exist at room temperature as a diatomic gas; in its natural state, hydrogen gas (H2) is made up of two hydrogen atoms bonded together. Finally, as already mentioned, it shares chemical properties with both alkali metals and halogens.
Learn more about Unique properties of Hydrogen here:https://brainly.com/question/37190424
#SPJ3
PLEASE HELP!!! NEED TO PASS THIS TO THE FIRST SEMESTER!
Are Reaction 1 and 2 balanced? If the reaction is not balanced, then state how you would balance it. Then, provide the balanced equation.
What kind of reaction does each reaction represents?
Answer:
Reaction 1 is balanced but 2 is not balanced , the balance equation are :
1. [tex]CH_{3}COOH(aq) + NaHCO_{3}(aq)\rightarrow CO_{2}(g) + H_{2}O(l) + CH_{3}COONa(aq)[/tex]
2.[tex]CaCl_{2}(aq) + 2NaHCO_{3}(aq)\rightarrow CaCO_{3}(aq) + H_{2}O(l) + 2NaCl(aq) + H_{2}O(aq)[/tex]
Explanation:
Balanced Equations : These are the equation which follows the law of conservation of mass .
The total number of atoms present in reactant is equal to total number of atoms present in product.
1. [tex]CH_{3}COOH(aq) + NaHCO_{3}(aq)\rightarrow CO_{2}(g) + H_{2}O(l) + CH_{3}COONa(aq)[/tex]
This is acid - base type reaction where
[tex]CH_{3}COOH(aq)[/tex] act as Acid
[tex] NaHCO_{3}(aq)[/tex] act as weak base
Reactant :[tex]CH_{3}COOH(aq)[/tex] ,[tex]NaHCO_{3}[/tex]
Number of atoms of :
C = 2 ([tex]CH_{3}COOH(aq)[/tex]) + 1 ([tex]NaHCO_{3}[/tex])
= 2 + 1
= 3
H = 4([tex]CH_{3}COOH(aq)[/tex]) + 1 ([tex]NaHCO_{3}[/tex])
= 4 + 1
5
O = 2([tex]CH_{3}COOH(aq)[/tex]) + 3 ([tex]NaHCO_{3}[/tex])
= 5
Na = 1 ([tex]NaHCO_{3}[/tex])
= 1
Product : [tex]CO_{2}(g)[/tex],[tex]H_{2}O(l)[/tex] , [tex]CH_{3}COONa(aq)[/tex]
Number of atoms :
C = 1([tex]CO_{2}(g)[/tex]) + 2([tex]CH_{3}COONa(aq)[/tex])
= 1 + 2
= 3
H = 2([tex]H_{2}O(l)[/tex]) + 3([tex]CH_{3}COONa(aq)[/tex])
= 2 + 3
= 5
O = 1([tex]H_{2}O(l)[/tex]) + 2([tex]CH_{3}COONa(aq)[/tex])
+2([tex]CO_{2}(g)[/tex]
= 1 + 2 + 2
= 5
Na = 1([tex]CH_{3}COONa(aq)[/tex]
= 1
Number of Na =1 , C = 3 , H= 5 and O =5 in both reactant and product , so it is a balanced reaction
2.[tex]CaCl_{2}(aq) + 2NaHCO_{3}(aq)\rightarrow CaCO_{3}(aq) + H_{2}O(l) + 2NaCl(aq) + CO_{2}(g)[/tex]
This is double displacement reaction .
Check the balancing in both reactant and products should be :
Na = 2
H = 2
Ca = 1
C = 2
O = 6
Cl = 2
According to this decay series chart, which is the proper order of nuclear particle emission that occurs during the transition from lead-214 to lLead-210?
A) Lead-214 changes to bismuth-214.
B) Bismuth-214 changes to polonium-214.
C) Polonium-214 changes to lead-210.
Explanation:
An alpha particles is basically a helium nucleus and it contains 2 protons and 2 neutrons.
Symbol of an alpha particle is [tex]^{4}_{2}\alpha[/tex].
A beta particle is a particle with a negatively charged electron. Symbol of a beta particle is [tex]^{0}_{-1}\beta[/tex].
According to the given question, the decay series chart along with reaction equation are as follows.
(a) Lead-214 changes to bismuth-214.
[tex]^{214}_{82}Pb \rightarrow ^{214}_{83}Bi + ^{0}_{-1}e[/tex]
(b) Bismuth-214 changes to polonium-214.
[tex]^{214}_{83}Bi \rightarrow ^{214}_{84}Po + ^{0}_{-1}e[/tex]
(c) Polonium-214 changes to lead-210.
[tex]^{214}_{84}Po \rightarrow ^{210}_{82} + ^{4}_{2}He[/tex]
Therefore, we can conclude that proper order of nuclear particle emission is beta, beta, alpha.
4.80 mol of solid A was placed in a sealed 1.00-L container and allowed to decompose into gaseous B and C. The concentration of B steadily increased until it reached 1.30 M, where it remained constant.
A(s) <===> B(g) + C(g)
Then, the container volume was doubled and equilibrium was re-established. How many moles of A remain?
Answer:
A = 3.5 moles
Explanation:
In order to do this, we need first to write the innitial conditions. The reaction is as follow:
A(s) <-------> B(g) + C(g)
From here, we can write an expression for the equilibrium constant which is:
Kc = [B]*[C]
We don't take A in the expression, because is solid, and solid and liquids do not contribute in the equilibrium.
We know the concentration of B, which is the same for C, because the moles of C are coming from A when it's decomposed, so if B is 1.3 M we can assume C is the same.
Kc for this innitial condition is:
Kc = (1.3)*(1.3) = 1.69
Now, in the second part of reaction the volume is doubled, which means that concentrations are halved:
A: 4.8/2 = 2.4 M
B and C: 1.3/2 = 0.65 M
So conditions for the second part will be like this:
A(s) <----> B(g) + C(g) Kc = 1.69
I: 2.4 0.65 0.65
C: -x +x +x
E: 2.4-x 0.65+x 0.65+x
Replacing in Kc we have:
1.69 = (0.65+x)² solving for x here
√1.69 = 0.65+x
1.3 = 0.65+x
x = 1.3 - 0.65
x = 0.65 M
Therefore, the remaining moles of A would be:
A = 2.4 - 0.65
[A] = 1.75 M
moles A = 1.75 * 2 = 3.5 moles
PLease help!!! Im in the process of taking my final!!!!! HELPPPPP
An unknown element has 3 rings in its Bohr model. It makes 3 bonds to become stable. It is conductive and shiny, but is not toxic. It is used to build many everyday items. What is the unknown element?
Answer:
The answer to your question is Aluminum
Explanation:
Number of clues
1.- If this element has 3 rings in its Bohr model, we are looking for and element located in the third period of the periodic table.
For example Sodium, Magnesium, Aluminum, Silicate, Phosphorus, Sulfur, Chlorine and, Argon.
2.- It makes three bonds to become stable, then we are looking for and element located in the third group like
Boron, Aluminum, Gallium, Indium, etc
Conclusion
The element that has both characteristics is Aluminum
A sample of gas contains four gases (He, Ne, Ar, and Xe) with the following partial pressures: He (43 mm Hg), Ar (835 mm Hg), and Xe (111 mm Hg). If the total pressure in the container is 1355 mm Hg, what is the partial pressure of Ne in the sample?
To find the partial pressure of Ne in the sample, subtract the sum of the partial pressures of the other gases from the total pressure.
Explanation:To find the partial pressure of Ne in the sample, we need to first determine the partial pressures of all the gases in the mixture. The total pressure in the container is 1355 mm Hg. The partial pressures given are: He (43 mm Hg), Ar (835 mm Hg), and Xe (111 mm Hg).
To find the partial pressure of Ne, we need to subtract the sum of the partial pressures of the other gases from the total pressure.
Partial pressure of Ne = Total pressure - (Partial pressure of He + Partial pressure of Ar + Partial pressure of Xe).
Predict the sign of ΔSsys for each process. Which are positive? A. A pond freezes in winter. B. Atmospheric CO2 dissolves in the ocean. C. An apple tree bears fruit. D. None of them are positive. Which are negative? A. A pond freezes in winter. B. Atmospheric CO2 dissolves in the ocean. C. An apple tree bears fruit. D. None of them are negative.
Answer:
Which are positive? D.
Which are negative? A. B. C.
Explanation:
Generally, entropy can be defined as the degree of randomness of a system. The entropy of any system increases with an increase in the number of moles of the system. Entropy also increases when there is a change of state from solid to liquid or liquid to gas. Therefore for the systems in the given question:
A pond freezes in winter
The degree of disorderliness decrease because there is a change of state from liquid to solid. Thus, ΔSsys is negative.
Atmospheric CO2 dissolves in the ocean
There is also decrease in randomness, thus, ΔSsys is negative.
An apple tree bears fruit
There is also decrease in randomness, thus, ΔSsys is negative.
A pond freezes in winter, atmospheric CO2 dissolves in the ocean, and an apple tree bears fruit are negative changes in Delta S.
What is Delta S?Delta S is a measurement used in thermodynamics to calculate the modifications in the level of entropy.
The term entropy makes reference to the degree of randomness (disorder) of a thermodynamic system. A negative delta S involves a decrease in entropy (disorder) regarding a particular system.In conclusion, a pond freezes in winter, atmospheric CO2 dissolves in the ocean, and an apple tree bears fruit are negative changes in Delta S.
Learn more in:
https://brainly.com/question/6364271
What is catalysis and what does a catalyst do to the activation energy of a reaction, and to the rate of the reaction. Does a catalyst change the nature of the products of the reaction? If a reaction is in equilibrium, does adding a catalyst shift the equilibrium?
Answer:
Answer in explanation
Explanation:
A catalyst is a substance that alter the rate of a chemical reaction. It either speeds up the rate of the chemical reaction or slows down the rate of the chemical reaction. Hence, we say a catalyst can either work positively or negatively.
A catalyst will bring down the value of the activation energy. It reduces the minimum amount of energy needed for the reaction to kickstart. Hence we say it tends to create an alternative pathway for the chemical reaction to proceed.
When it speeds up the rate, it is otherwise known as a positive catalyst, otherwise it is a negative catalyst.
A catalyst does not have any business with the nature of the products or the reactants. Its work is simple, either hasten or slow down the rate of a chemical reaction.
A catalyst has no effect On the equilibrium position of a chemical reaction. This is to say its addition or subtraction has no effect on the position of a chemical reaction
Catalysis is the process by which a catalyst lowers the activation energy of a chemical reaction, thus increasing the reaction rate without changing the nature of the products. A catalyst does not shift the position of a reaction at equilibrium but enables the system to reach equilibrium more quickly.
Explanation:What is Catalysis?
Catalysis refers to the process by which a catalyst increases the rate at which a chemical reaction occurs. A catalyst facilitates a chemical reaction without undergoing any permanent chemical change itself. It works by providing an alternative reaction pathway with a lower activation energy (Ea), which is the energy required to initiate the reaction. This lower activation energy means that more reactant molecules can effectively collide and react at a given temperature, thereby speeding up the reaction rate.
Effect on Activation Energy and Reaction Rate
The presence of a catalyst in a chemical reaction results in a lower activation energy barrier. This, in turn, means that a greater percentage of reactant molecules have enough energy to overcome this barrier and form products. Consequently, the reaction rate is increased since the reaction can proceed faster.
Does a Catalyst Change the Nature of the Products?
A catalyst does not affect the energy of the reactants or the products, nor does it alter the overall thermodynamics of the reaction. Therefore, it does not change the nature of the products of the reaction.
Adding a Catalyst to a Reaction in Equilibrium
When a reaction is in equilibrium, adding a catalyst will not shift the equilibrium position or alter the concentrations of reactants and products at equilibrium. Instead, it will increase the rate at which equilibrium is reached by speeding up both the forward and reverse reactions equally.
Trenton collects a sample of moist air. One of these factors is unrelated to the amount water vapor in his sample. Which factor is it? A. Pressure B. Temperature C. Vapor density D. Volume E. Wind speed
Wind speed is unrelated to the amount of water vapour in the sample of moist air.
Answer: Option E
Explanation:
As the sample of moist air is combination of water vapour mixed with air molecules, there will be no generation of wind in the moist air. But there will be change in the pressure and temperature when water vapours or moisture mixes with air molecules.
As water is having high density compared to air molecules, the pressure will be changed in moist air. So, the amount of water vapour in the moist air sample can measure by relative difference in pressure, temperature, vapour density and volume with air molecules in general.
Answer:
Answer E
Explanation:
Addition of which disaccharide to a solution of Ag2O in NH3(aq) will NOT result in the deposition of shiny silver mirror on the walls of the reaction vessel?
Answer:
Saccharose
Explanation:
Disaccharide Saccharose is formed by glucose and fructose, both monosaccharides are bound by their anomeric carbons (O-glucosidic), this is, both reducing carbons form the O-glucosidic bond, hence, they are not available to reduce Ag⁺ to Ag⁰
The emission spectrum of an element:
A. may be identical to the emission spectrum of another element.
B. is identical to its absorption spectrum.
C. may be identical to the absorption spectrum of another element.
D. is different from any other element's absorption spectrum.
B
The emission spectrum of an element is identical to its absorption spectrum.
Explanation:
This is because a quantum leap of an electron of an atom from one lower energy level to a higher one results in the absorption of a specific wavelength of electromagnetic radiation. When the electron leaps back to the lower energy level, it releases the same wavelength of electromagnetic radiation. This is according to Bohr's theory. Every atom has a signature absorption and emission spectra that are used to identify it.
Learn More:
For more on Bohr theory of the atom check out;
https://brainly.com/question/5839092
https://brainly.com/question/12479859
https://brainly.com/question/1528920
#LearnWithBrainly
NaCl(aq) AgNO3(aq) → AgCl(s) NaNO3(aq) : NaCl(aq) AgNO3(aq) \rightarrow AgCl(s) NaNO3(aq) : blank H2SO4(aq) 2 LiOH(aq) → 2 H2O(l) Li2SO4(aq) : H2SO4(aq) 2 LiOH(aq) \rightarrow 2 H2O(l) Li2SO4(aq) : blank HCl(aq) (NH4)2S(aq) → H2S(g) 2 NH4Cl(aq) : HCl(aq) (NH4)2S(aq) \rightarrow H2S(g) 2 NH4Cl(aq) : blank Mg(s) Cu(NO3)2(aq) → Mg(NO3)2(aq) Cu(s) :
The question is incomplete, here is a complete question.
Categorize each reaction into types of chemical reactions.
(1) [tex]NaCl(aq)+AgNO_3(aq)\rightarrow AgCl(s)+NaNO_3(aq)[/tex]
(2) [tex]H_2SO_4(aq)+2LiOH(aq)\rightarrow 2H_2O(l)+Li_2SO_4(aq)[/tex]
(3) [tex]HCl(aq)+(NH_4)_2S(aq)\rightarrow H_2S(g)+2NH_4Cl(aq)[/tex]
(4) [tex]Mg(s)+Cu(NO_3)_2(aq)\rightarrow Mg(NO_3)_2(aq)+Cu(s)[/tex]
Answer :
(1) Precipitation reaction
(2) Neutralization reaction
(3) Double-displacement reaction
(4) Single replacement reaction
Explanation :
(1) The balanced chemical reaction is:
[tex]NaCl(aq)+AgNO_3(aq)\rightarrow AgCl(s)+NaNO_3(aq)[/tex]
This reaction is a precipitation reaction in which an insoluble salt formed when two aqueous solutions are combined. The insoluble salt that settle down in the solution is known an precipitate.
(2) The balanced chemical reaction is:
[tex]H_2SO_4(aq)+2LiOH(aq)\rightarrow 2H_2O(l)+Li_2SO_4(aq)[/tex]
This is a neutralization reaction in which an acid react with a base react to give salt and water as a product that means it reacts to give a neutral solution.
(3) The balanced chemical reaction is:
[tex]HCl(aq)+(NH_4)_2S(aq)\rightarrow H_2S(g)+2NH_4Cl(aq)[/tex]
The given reaction is a double-displacement reaction in which the cation of two reactants molecule exchange their places to give two different products.
(4) The balanced chemical reaction is:
[tex]Mg(s)+Cu(NO_3)_2(aq)\rightarrow Mg(NO_3)_2(aq)+Cu(s)[/tex]
This reaction is a single replacement reaction in which the the more reactive element replace the less reactive element.
Cesium frequently is used in photocells because its work function (3.43 × 10(to the -19th power) J) is the lowest of all the elements. Such photocells are ef cient because the broadest range of wavelengths of light can eject electrons. What colors of light will eject electrons from cesium? What colors of light will eject electrons from selenium, which has a work function of 9.5 × 10(to the -19th power) J?
Answer:
I have no idea how to do this question its hard for me
Explanation:
All colors of visible light can eject electrons from cesium due to its low work function. For selenium, only light towards the blue/violet end of the spectrum (short wavelength, high energy) can eject electrons due to its higher work function.
Explanation:The phenomenon discussed in question involves the photoelectric effect, which occurs when light of a certain wavelength strikes a metal and ejects electrons. The color of light that can eject electrons from a substance is dependent on the substance's work function, the minimum energy necessary to remove an electron from the substance.
Given Cesium's low work function (3.43 × 10^-19 J), it can be activated by a wide range of wavelengths, meaning that all visible colors of light, from red (long wavelength, low energy) to violet (short wavelength, high energy), can eject electrons from it.
However, with Selenium's higher work function (9.5 × 10^-19 J), only light with shorter wavelengths and therefore higher energy, will be able to eject electrons. This means that only light towards the blue/violet end of the spectrum will be able to eject electrons from this element.
Learn more about photoelectric effect here:https://brainly.com/question/12732631
#SPJ2
Lithium ion salts were originally found in Seven-Up® drinks. How many electrons does Li atom lose to become an ion?
Answer: One (1) electron
Explanation:
Lithium is a group 1 element with an atomic number of 3. Thus, it has just 3 electrons and its electronic configuration is 1s2, 2s1
To become lithium ion salts, it gives off its lone electron thereby becoming Li+ with configuration of 1s2 with just 2 electrons left.
So, Li atom loses only ONE ELECTRON to become an ion
The longest wavelength of light with enough energy to break the Cl-Cl bond in Cl2(g) is 495 nm.
1) calculate the frequency in s-1 of the light2) calculate the energy in J of a photon of the light3) calculate the minimun energy in KJ mol-1 of the cl-cl bond
Explanation:
The longest wavelength of light with enough energy to break the Cl-Cl bond = 495 nm = [tex]495\times 10^{-9} m[/tex]
1) The frequency of the light:
[tex]\lambda =495\times 10^{-9} m[/tex]
[tex]\nu=\frac{c}{\lambda }[/tex]
c = speed of light= [tex]3\times 10^8 m/s[/tex]
[tex]\nu=\frac{3\times 10^8 m/s}{495\times 10^{-9} m}[/tex]
[tex]=6.0606\times 10^{14) s^{-1}[/tex]
The frequency of the light is [tex]6.0606\times 10^{14) s^{-1}[/tex].
2)The energy of a photon of the light:
The energy of the photon is given by : E
[tex]E=h\nu [/tex]
h = Planck's constant = [tex]6.626\times 10^{-34} J/s[/tex]
[tex]E=6.626\times 10^{-34} J/s\times 6.0606\times 10^{14) s^{-1}[/tex]
[tex]=4.016\times 10^{-19} J[/tex]
The energy of a photon of the light is [tex]4.016\times 10^{-19} J[/tex].
3) The minimum energy of the Cl-Cl bond :
To break single bond of Cl-Cl bond we need energy E= [tex]4.016\times 10^{-19} J[/tex]
1 mole = [tex]N_A=6.022\times 10^{23} mol^{-1} [/tex]
So, in order to break 1 mole of Cl-Cl bond we will need:
[tex]E\times N_A=4.016\times 10^{-19} J\times 6.022\times 10^{23} mol^{-1} [/tex]
[tex]=241,828.92 J/mol=241,828.92\times 0.001 kJ/mol=241.83 kJ/mol[/tex]
The minimum energy of the Cl-Cl bond is 241.83 kJ/mol.
The frequency of the light radiation has been 6.0606 × [tex]\rm 10^1^4[/tex] /sec. The energy of the light photon has been 4.016 × [tex]\rm 10^-^1^9[/tex] J. The minimum energy in the Cl-Cl bond has been 241.8292 kJ/mol.
(1) The frequency can be defined as the number of times the wave has been repeated, while the wavelength has been defined as the distance of one wave.
The frequency of the wave in the air can be given as:
Frequency = [tex]\rm \dfrac{speed}{wavelength}[/tex]
Frequency of 495 nm wavelength has been :
Frequency = [tex]\rm \dfrac{3\;\times\;10^8\;m/sec}{495\;\times\;10^-^9\;m}[/tex]
Frequency = 6.0606 × [tex]\rm 10^1^4[/tex] /sec
The frequency of the light radiation has been 6.0606 × [tex]\rm 10^1^4[/tex] /sec.
(2) The energy of the light photon has been given by:
Energy = Plank's constant × Frequency
Energy = 6.626 × [tex]\rm 10^-^3^4[/tex] J/s × 6.0606 × [tex]\rm 10^1^4[/tex] /sec
The energy of the photon = 4.016 × [tex]\rm 10^-^1^9[/tex] J.
The energy of the light photon has been 4.016 × [tex]\rm 10^-^1^9[/tex] J.
(3) The minimum energy of Cl-Cl bond has been given by:
The energy for 1 photon = 4.016 × [tex]\rm 10^-^1^9[/tex] J.
The energy for 1 mole of Cl-Cl has been the minimum energy for breaking Cl-Cl bond.
1 mole = 6.023 × [tex]\rm 10^2^3[/tex] atoms
Energy for Cl-Cl bond has been = 4.016 × [tex]\rm 10^-^1^9[/tex] J × 6.023 × [tex]\rm 10^2^3[/tex] atoms
Energy for Cl-Cl bond has been = 241,828.92 J/mol
Energy for Cl-Cl bond has been = 241.8292 kJ/mol.
The minimum energy in the Cl-Cl bond has been 241.8292 kJ/mol.
For more information about frequency, refer to the link:
https://brainly.com/question/4393505
A Beer's law plot for Cu2+ was experimentally obtained. The slope of the Beer's law plot was 310 L/mol (with a y-intercept = 0.001). A Cu2+ solution of unknown concentration had an absorbance of 0.55. What is the molar concentration of Cu2+ in the unknown solution?
Answer:
[tex]1.7742\times 10^{-3} mol/L[/tex] is the molar concentration of Cu(II) ions in the unknown solution.
Explanation:
Using Beer-Lambert's law :
Formula used :
[tex]A=\epsilon \times C\times l[/tex]
where,
A = absorbance of solution
C = concentration of solution
l = length of the cell =
[tex]\epsilon[/tex] = molar absorptivity of solution
A Beer's law plot is between absorbance and concentration.
[tex]\frac{A}{c}=Slope(m)=\epsilon\times l[/tex]
We have:
A = 0.55
The slope of the Beer's law plot = m = 310 L/mol
So, the concentration of the solution is:
[tex]c=\frac{A}{m}=\frac{0.55}{310 L/mol}=1.7742\times 10^{-3} mol/L[/tex]
[tex]1.7742\times 10^{-3} mol/L[/tex] is the molar concentration of Cu(II) ions in the unknown solution.
Using Beer's law and the given slope and absorbance values, the molar concentration of Cu2+ in the solution is approximately 1.77 * [tex]10^{-3[/tex] M.
Explanation:Beer's law, also known as the Beer-Lambert law, establishes a linear relationship between the absorbance of a species in a solution and its concentration. The equation for Beer's law is A = εlc, where A is absorbance, ε is the molar absorptivity (given by the slope in this case), l is the path length (assumed to be 1 cm here), and c is the concentration. In your case, the slope is 310 L/mol, and you have measured an absorbance of 0.55.
To find the concentration of Cu2+ in the solution, we rearrange the Beer's law equation to c = A / εl. Substituting in your values, we get c = 0.55 / (310 L/mol * 1 cm), which simplifies to c = 0.00177 mol/L or 1.77 * [tex]10^{-3[/tex] M. So the molar concentration of Cu2+ in the unknown solution is approximately 1.77 * [tex]10^{-3[/tex] M.
Learn more about Molar Concentration here:https://brainly.com/question/15532279
#SPJ11