Answer:
Laura can look for a transparent and translucent liquid and hence determine which beaker has water and which has solution
Explanation:
Pure water is a compound that is transparent in color. However, a solution is a liquid mixture comprising of a solvent or a solute. The atoms of solute occupy space between the atoms of solvent and hence are said to dissolve in it. Water can be a solvent.
Thus, if the beaker has a transparent liquid in it, then it would be pure water while a beaker having a translucent liquid, then it would be a solution
Final answer:
Laura can differentiate pure water from solutions by using a conductivity test, indicators like pH paper or red cabbage water, measuring boiling and freezing points, or measuring the refractive index with a refractometer.
Explanation:
Laura can determine which beakers contain pure water and which contain solutions by conducting a series of tests that rely on the physical and chemical properties of the substances. Here are potential methods for differentiating between pure water and solutions:
Conducting a conductivity test, as pure water is a poor conductor of electricity while solutions with ions will conduct electricity.
Using indicators such as pH paper or red cabbage water, as solutions might be acidic or basic, changing the color of the indicator while pure water will not.
Examining the boiling and freezing points, as solutions have different boiling and freezing points compared to pure water.
Employing a refractometer or similar devices to measure the refractive index, which would differ between pure water and a solution.
To elaborate, a conductivity test can be set up by inserting electrodes into each beaker and connecting these to a circuit with a bulb or a conductivity meter. A color change when using red cabbage water as an indicator would signify the presence of an acidic or basic solution, since red cabbage juice changes color at different pH levels. Observing the boiling and freezing points would require heating or cooling the liquid and taking note of the temperature at which the change of state occurs. Pure water has specific boiling and freezing points (100°C and 0°C at standard atmospheric pressure), and deviations from these numbers would indicate a solution. Lastly, a refractometer could be used to compare the refraction of light through the liquids against known values for pure substances, revealing which beakers contain pure water and which contain solutions.
What are chemical contaminants?
Homemade soaps
Restaurant grade cleaners
Alcohol
Recreational drugs
Answer:
Homemade soaps
Restaurant grade cleaners
Alcohol.
Explanation:
The two options are a mixture of more than one chemical constituents.
Soap is made from saponification reaction of of hydrocarbons and then mixed with other ingredients for better usability, and cleaning agent have one or more substances dissolved in another.
A chemical contaminants will include restaurant grade cleaners which may be found in food.
What are contaminants?Contaminants are substances which are not normally present in a substance and which alters the chemical and physical properties of the substance.
Chemical contamination results when substances are not stored or labelled properly.
A contaminant makes a substance impure.
Chemical contaminants will include restaurant grade cleaners which may be found in food.
Learn more about chemical contaminants at: https://brainly.com/question/24959325
6. Marcus's genotype for eye color is bb. Olivia has brown eyes, but she is heterozygous for the trait.
a. What percentage of the children have blue eyes?:
b.If Violet has green eyes and Jonas has brown eyes, what is Claudia's genotype?:
c.How many people in the family have blue eyes?:
Marcus and Olivia have a 50% chance of having children with blue eyes because Marcus has the genotype bb and Olivia is heterozygous (Bb). Claudia's genotype cannot be determined without more information. The number of family members with blue eyes cannot be provided due to a lack of information.
The question involves understanding genetic inheritance, particularly in relation to eye color which is controlled by multiple genes. Marcus has a genotype of bb for eye color, which means he has blue eyes since 'b' is the recessive allele. Olivia has brown eyes and is heterozygous for the trait, which means her genotype is Bb.
a. When Marcus (bb) and Olivia (Bb) have children, each child has a 50% chance of inheriting a 'b' allele from Marcus and a 50% chance of inheriting either a 'B' or 'b' allele from Olivia. This results in a 50% chance of their children having blue eyes (if they inherit a 'b' from both parents, resulting in bb) and a 50% chance of having brown eyes (if they inherit a 'B' from Olivia and a 'b' from Marcus, resulting in Bb).
b. The information regarding Violet and Jonas is insufficient to determine Claudia's genotype. Without knowing the genotypes or the relationship between these individuals, we cannot conclude Claudia's genotype for eye color.
c. Since the number of people in the family and their genotypes are not provided in the question, we cannot determine how many people have blue eyes.
Calnexin and calreticulin catalyze the removal of the final glucose residue from glycoproteins during the folding process. True or False Transketolase transfers two carbon units in the pentose phosphate pathway using a thiamine pyrophosphate cofactor. True or False In theory, chloroplasts should only absorb 8 photons per oxygen molecule evolved during photosynthesis, but they actually absorb more than 8 photons per evolved oxygen molecule. True or False Fructose-2,6-bisphosphate activates both phosphofructokinase and fructose bisphosphatase to increase flux through gluconeogenesis. True or False The Calvin cycle shares enzymes that are homologous to enzymes involved in glycolysis, gluconeogenesis, and the pentose phosphate pathway with only three enzymes unique to the Calvin cycle. True or False
Answer:
Explanation:
A) False.
Glucosidase (not calnexin nor calreticulin) helps to remove glucose residue.
Both calnexin and calreticulin rather have an affinity for last glucose residue of misfolded protein (Only misfolded proteins are marked by glycosyltransferase by attaching glucose residue). They attach with misfolded protein and with the help of other proteins like ERp57 (a type of protein disulfide isomerase) and try to fold it properly. If protein is properly folded then glucosidase removes the glucose residue thereby releasing the properly folded protein from calnexin or calreticulin. and now protein is transported to the Golgi body. If folding is still not proper then the same cycle of glycosylation -binding of calnexin/calreticulin and effort to fold it properly is repeated.
B) True.
Transketolase is a key enzyme of the pentose phosphate pathway. It contains thiamine diphosphate (TPP) as a cofactor. it does transfer 2 carbon residue from a ketose to aldose. So, effectively it converts one ketose sugar to aldose with 2 carbonless and aldose to ketose with 2 carbon more.
C) True.
Theoretically, for the evolution of one molecule of oxygen, only 8 photons are required. But in practice, it is known that there are many variants like wavelength and the energy of the photon. The larger the wavelength, like the one which is used in PS1 (more than 700nM), the lesser the energy. Secondly, the energy of the photon is also wasted as heat energy. Because of these factors, more than 8 photons are needed in reality.
D) Wrong.
Fructose 2,6 bisphosphate is a key substrate and affects both the enzymes- phosphofructokinase and fructose bisphosphatase allosterically during gluconeogenesis. It strongly favors the breakdown of glucose during glycolysis by activating phosphofructokinase but it inhibits fructose bisphosphatase. Hence it activates the kinase enzyme while inhibiting the phosphatase and maintains a huge supply of glucose in the system.
E) Wrong.
The Calvin cycle shares similarity with the pentose phosphate pathway as both are involved in the synthesis of sugar (Triose and Ribose). However, it does not share similarity with enzymes of glycolysis (which is primarily focused on the breakdown of glucose) and gluconeogenesis.
Atoms can be seen with the naked eye.
Atoms do not have mass.
Atoms make up every substance around you.
Answer:
Atoms make up every substance around you. True
Explanation:
Atoms can be seen with the naked eye. False because atoms are very very very smallllll....
Atoms do not have mass. False, atoms do have mass although it is very smallllllllll as welll
Atoms make up every substance around you. True, similar to how cells make up different things like tissues, and tissues make organs and so on, atoms make up everything around us.
Which 0.10 M solutions will have the greatest electrical conductivity?
Complete Question: Which solution will have the greatest electrical conductivity?
A. 0.50MHCl
B. 0.10MRbOH
C. 0.50MK3PO4
D. 2.0MC6H12O6
Answer:
Option C =>0.50M K3PO4.
Explanation:
Electrical conductivity has do do with the mobility of electrons or ion, that is to say for electrical conductivity to occur there should be the movement of ions or electrons.
So, let us take option (A) and option (B) first, that is 0.50MHCl and 0.10MRbOH respectively. Both HCl and RbOH are good conductors of electricity that is to say they are both strong electrolytes. But, between the two, (that is HCl and RbOH) HCl will be better conductor of electricity that RbOH.
Option (D) is incorrect totally, and option (C) 0.50M K3PO4 is a strong electrolytes too and it will be will be the CORRECT ANSWER in this question because it gives 4 ions( K3PO4 <======> 3K^+ + PO4^-3) unlike HCl that only gives 2 ions(that is HCl <=====> H^+ + Cl^-).
Option C. 0.50M K₃PO₄.
Let's understand the concept behind electrical conductivity:
Electrical conductivity tells us how well a material will allow electricity to travel through it. It is proportional to the product of mobility and carrier concentration.
Let's look at options one by one:
In option (A) and (B) it is given 0.50M HCl and 0.10M RbOH respectively. Both HCl and RbOH are good conductors of electricity thus they both are strong electrolytes. Out of these two HCl is more stronger electrolyte than RbOH. Option (D) 2.0M C₆H₁₂O₆ -the molecule of glucose is considered as a non-electrolyte, because of its inability to dissociate into ions. Option (C) 0.50M K₃PO₄ is a strong electrolyte than HCl since K₃PO₄ is an ionic compound so it dissociates completely in water to form potassium ion and phosphate ion.K₃PO₄ can dissociate into ions which can be represented as:K₃PO₄(aq) → 3K⁺(aq) + PO₄³⁻(aq)
So out the following options K₃PO₄ will have the greatest electrical conductivity since it is the strongest electrolyte out of the given options.
Learn more:
brainly.com/question/13322537
When an unsymmetrical alkene such as propene is treated with N-bromosuc- cinimide in aqueous dimethyl sulfoxide, the major product has the bromine atom bonded to the less highly substituted carbon atom. Is this Markovnikov or non-Markovnikov orientation? Explain.
Answer:
Explanation:
kindly check the file below to show the explanation . Thanks
Why water pollution is a global problem
Answer:
Pollutants are typically the cause of major water quality degradation around the world. Globally, the most prevalent water quality problem is eutrophication, a result of high-nutrient loads (mainly phosphorus and nitrogen), which substantially impairs beneficial uses of water.
Explanation:
Answer:
Water pollution is caused by industrial waste, temperature rising, deforestation and many other factors. All these facts are affecting water and they happen all over the world in many large bodies of water. Thus, it is a global issue,
Explanation:
I explained it in the answer loll.
A trisubstituted cyclohexane compound is given below in its chair conformation. Draw the corresponding planar (overhead) representation, using wedge-and-dash bonds to indicate the substituent positions. To be graded properly, include the hydrogen atoms on the halogen-bearing carbon atoms. Be sure that both wedge/dash bonds are drawn on the outside of the ring, or else the stereochemistry may be interpreted as square planar. (See Hint.)
Answer:
See explaination
Explanation:
Chiral carbons are carbons that have four different groups, so C atoms 1, 4, and 5 are chiral carbons and thus H atoms are shown for those atoms.
The equilibrium constant is given for one of the reactions below. Determine the value of the missing equilibrium constant. Deuterium, D, is an isotope of hydrogen. 2 HD(g) ⇌ H2(g) + D2(g) Kc = 0.28 5 H2(g) + 5 D2(g) ⇌ 10 HD(g) Kc = ? The equilibrium constant is given for one of the reactions below. Determine the value of the missing equilibrium constant. Deuterium, D, is an isotope of hydrogen. 2 HD(g) ⇌ H2(g) + D2(g) Kc = 0.28 5 H2(g) + 5 D2(g) ⇌ 10 HD(g) Kc = ? 581 0.73 1.3 0.0017 2.06
Answer:
Answer choice 'D' => Kc(2) = 581
Explanation:
2HD ⇄ H₂ + D₂ => Kc(1) = [H₂][D₂]/[HD]² => 0.28
5H₂ + 5D₂ ⇄ 10HD => Kc(2) = [HD]¹⁰/[H₂]⁵[D₂]⁵ = 1/(Kc(1))⁵ = 1/(0.28)⁵ = 581
For these type problems, one should 1st write the empirical Kc expression for each equation given. Then compare the expressions and ask 'how can the 1st Kc expression be changed into the 2nd Kc expression?' Apply and substitute given Kc(1) into the Kc(2) expression and solve for numerical results.
The equilibrium constant for the second reaction 5 H2(g) + 5 D2(g) ⇌ 10 HD(g) is 0.0017 when the equilibrium constant for the first reaction 2 HD(g) ⇌ H2(g) + D2(g) is 0.28. This is calculated by taking the first reaction's Kc and raising it to the power of 5.
Explanation:The chemical reaction you have given is a perfect example of equilibrium in chemistry. In the first reaction, 2 HD(g) ⇌ H2(g) + D2(g), the equilibrium constant Kc is already given as 0.28. If we look at the second reaction, 5 H2(g) + 5 D2(g) ⇌ 10 HD(g), we can see that it's technically the first reaction multiplied by 5. Therefore, to find Kc for the second reaction, we simply raise the Kc of the first reaction to the power of 5. So, Kc for the second reaction would be (0.28)^5 = 0.0017.
Learn more about Chemistry Equilibrium Constant here:https://brainly.com/question/36150835
#SPJ2
A GAS SAMPLE HAS A TEMPERATURE OF 18 CELSIUS WITH AN UNKNOWN VOLUME. THE SAME GAS HAS A VOLUME OF 436 ML WHEN THE TEMPERATURE IS 91 CELSIUS WITH NO CHANGE IN THE PRESSURE AND AMOUNT OF GAS
WHAT WAS THE INITIAL VOLUME IN MILLILITERS OF THE GAS
Answer:
349 mL
Explanation:
Given data
Initial volume (V₁): unknownInitial temperature (T₁): 18 °C + 273.15 = 291 KFinal volume (V₂): 436 mLFinal temperature (T₂): 91°C + 273.15 = 364 KIf we consider the has as an ideal gas, we can calculate the initial volume of the gas sample using the Charles' law.
V₁ / T₁ = V₂ / T₂
V₁ = V₂ × T₁ / T₂
V₁ = 436 mL × 291 K / 364 K = 349 mL
A quantity of 25.0 mL of a solution containing both Fe2+ and Fe3+ ions is titrated with 23.0 mL of 0.0200 M KMnO4 (in dilute sulfuric acid). As a result, all of the Fe2+ ions are oxidized to Fe3+ ions. Next, the solution is treated with Zn metal to convert all of the Fe3+ ions to Fe2+ ions. Finally, the solution containing only the Fe2+ ions requires 40.0 mL of the same KMnO4 solution for oxidation to Fe3+. Calculate the molar concentrations of Fe2+ and Fe3+in the original solution. The net ionic equation is Mno4- +5Fe2+ + 8H+ >>>> Mn2+ + 5Fe3+ +4H2o
The molar concentrations of Fe2+ and Fe3+ in the original solution are 18.4 mM.
Explanation:To calculate the molar concentrations of Fe2+ and Fe3+ in the original solution, we can use stoichiometry based on the net ionic equation provided:
MnO4- + 5Fe2+ + 8H+ -> Mn2+ + 5Fe3+ + 4H2O
From the equation, we can see that one mole of MnO4- reacts with 5 moles of Fe2+. In the first titration, 23.0 mL of 0.0200 M KMnO4 solution is required to react with all of the Fe2+ ions, which means there is a total of 23.0 mL x 0.0200 M = 0.460 mmol of Fe2+ in the original solution.
In the second titration, 40.0 mL of the same KMnO4 solution is required to react with all of the Fe2+ ions converted from Fe3+. This means there is a total of 40.0 mL x 0.0200 M = 0.800 mmol of Fe2+ in the original solution.
Since all of the Fe2+ ions are converted to Fe3+ in the first titration, the total amount of Fe3+ in the original solution is also 0.460 mmol.
Therefore, the molar concentrations of Fe2+ and Fe3+ in the original solution are:
[Fe2+] = 0.460 mmol / 25.0 mL = 18.4 mM
[Fe3+] = 0.460 mmol / 25.0 mL = 18.4 mM
Learn more about Molar concentrations of Fe2+ and Fe3+ in the original solution here:https://brainly.com/question/31430702
#SPJ1
A gas has a density of 2.22 g/L at 1.04 atm and a molar mass of 51.7 g/mol.
What is the temperature of the gas in Kelvin?
.
Answer:
295.4K
Explanation:
Step 1:
Obtaining an expression which relates density, pressure and temperature together.
This is can done by using the ideal gas equation as shown below:
PV = nRT........... (1)
Recall:
Number of mole (n) = mass (m) /Molar Mass (M) i.e
n = m/M
Substituting the m/M for n in equation 1 above
PV = nRT
PV = mRT/M
Divide both side by P
V = mRT/MP
Divide both side by m
V/m = RT/MP
Invert the above equation
m/V = MP/RT.....(2)
Density (D) = mass (m) /volume (V)
D = m/V
Replacing m/V with D in equation 2.
m/V = MP/RT
D = MP/RT
Step 2:
Data obtained from the question. This includes the following:
Density (D) = 2.22 g/L
Pressure (P) = 1.04 atm
Molar Mass of (M) = 51.7 g/mol.
Temperature (T) =.?
Gas constant (R) = 0.082atm.L/Kmol
Step 3:
Determination of the temperature.
D = MP/RT
2.22 = 51.7 x 1.04 / 0.082 x T
Cross multiply to express in linear form
2.22 x 0.082 x T = 51.7 x 1.04
Divide both side by 2.22 x 0.082
T = (51.7 x 1.04) /(2.22 x 0.082)
T = 295.4K
Therefore, the temperature of the gas is 295.4K
A chemical reaction that has the general formula of AB +CCB + A is best classified as a
reaction.
Answer:
A single replacement reaction.
Explanation:
AB + C ---> CB + A
A single replacement reaction.
Answer:
It will be classified as REPLACEMENT reaction
Explanation:
Hope it helps
What is the charge on an ion that has an atomic number of 27 and contains 26e−?
Answer:
+1
Explanation:
Atomic number 27, that means atom has 27 protons, nucleus charge = + 27'
26e− have charge -26.
+27-26 = +1 is ion charge
Draw the major product expected when 1,3-butadiene is treated with one equivalent of HBr at 40ºC and show the mechanism of its formation. For the mechanism, include lone pairs and charges in your answer. Do not draw out any hydrogen explicitly. Do not use abbreviations such as Me or Ph.A) Draw step 1 of the mechanism.
Answer:
The major product and the mechanism is shown below.
Explanation:
In the reaction of 1,3-butadiene, with one equivalent of HBr, the addition product 1,2 is generated primarily at 40 ° C. When 1,3-butadiene reacts with HBr, a mixture of two products is obtained. One of them, 3-bromo-1-butene, is formed by the addition of HBr to one of the double bonds of the classic structure of this compound.
In contrast, the second and major product, 1-bromo-2-butene, does not have any of the terminal double bonds but contains a double bond between the C2-C3 carbons.
Which activity is a way the circulatory system works with another body system
to maintain homeostasis?
A. breaking down food into nutrients
B. transporting hormones through the body
C. depositing fat on the inside walls of arteries
Answer:
A. breaking down food into nutrients
Explanation:
Homeostasis is the ability of the human body to regulate itself or achieve internal stability. If a body's conditions can not be regulated, it may result to the break down of its immune system leading to infections, diseases or disorder.
To maintain homeostasis, the circulatory system transports oxygen-rich blood to other parts of the body. So that the immediate condition can be regulated. It works with the respiratory system, delivering nutrients to other parts of the body. It also remove wastes from our body.
gfvygikbgkuuk uygglyh
Match the following: Molecule Test 9. Carbohydrates A. Biuret test 10. Starch and glycogen B. Paper test 11. Lipids C. I2KI test 12. Proteins D. Benedict test 13. Nucleic acids E. None of the above
Answer:
Carbohydrates------Benedict test
Starch and glycogen --------I2KI test
Proteins--------Biuret test
Lipids-------Paper test
Nucleic acids------None of the above
Explanation:
Benedict's Test is can be used to detect simple carbohydrates. The Benedict's test can detect reducing sugars (monosaccharide's and some disaccharides), having free ketone or aldehyde functional groups.
The Biuret Test shows the presence of peptide bonds, which are the basis for proteins. These bonds makes the blue Biuret reagent turn purple. The rest is carried out by adding an equal amount of NaOH to a solution of the food, mix carefully and add a few drops of 1% CuSO4, without shaking the mixture.
Lipids form a translucent stain on paper while starch/glycogen turns I2/KI solution blue-black
how many liters of bromine are needed to produce 12 moles of Aluminum bromide? The density of bromine is 3.1 m/gl
Answer:
0.94 L
Explanation:
Step 1: Write the balanced reaction
2 Al + 3 Br₂ = 2 AlBr₃
Step 2: Calculate the moles of Br₂ required to produce 12 moles of AlBr₃
The molar ratio of Br₂ to AlBr₃ is 3:2. Then,
[tex]12molAlBr_3 \times \frac{3molBr_2}{2molAlBr_3} =18molBr_2[/tex]
Step 3: Calculate the mass of bromine corresponding to 18 moles
The molar mass of bromine is 159.81 g/mol. Then,
[tex]18mol \times \frac{159.81g}{mol} =2.9 \times 10^{3} g[/tex]
Step 4: Calculate the volume of bromine corresponding to 2.9 × 10³ g
The density of bromine is 3.1 g/mL. The volume of bromine is:
[tex]2.9 \times 10^{3} g \times \frac{1mL}{3.1g} \times \frac{1L}{1000mL} = 0.94 L[/tex]
When you hear the word solution, you tend to think of a liquid. However, a solution can be a homogeneous mixture of any phase. These two questions are about a solid solution that has properties of a metal. When some atoms of the solvent are replaced by solute atoms of a similar size, the solution is called a heterogeneous alloy. an intermetallic compound. a substitutional alloy. an interstitial alloy.
Both questions are answered below:
Substitutional alloysInterstitial alloysExplanation:
Some atoms of the solvent can be replaced by atoms of relatively similar sizes, allowing for atom exchange or substitution, Whenever these atoms can be substituted within the matrix, it forms a substitutional alloy. Examples include bronze and brass.
Alternatively, some atoms are much smaller in size and cannot successfully be exchanged for the other. Instead, they get trapped within the matrix. these are called interstitial alloys, e.g steel.
the calculation of quantities in chemical reaction is called
Answer:
The correct answer would be stoichiomtery!
Answer:
This is known as stoichiometry. Stoichiometry, by definition, is the calculation of the quantities of reactants or products in a chemical reaction using the relationships found in the balanced chemical equation.
The pressure at the center of the earth is probably greater than 3x106 atm, and the temperature there is about 4000 °C. What is the change in the Gibbs function of reaction on going from crust to core for a reaction in which Vm = 1 cm3 mol-1 and Sm = 2.1 J K-1 mol-1
Answer:
The change in the Gibbs function of reaction on going from crust to core, dG=291442.4 J/mol
Explanation:
dG=vdp-sdT
Where T is the temperature .
P is the pressure.
S is entropy
V= 1cm3 =10-6 m3
P= 3*10∧6 atm = 3*10∧11 pa
The temperature at the center of the earth, Tc = 4*103 °C. : The temperature at the sufrace (crust) of the earth, Ts =298K.
Subistuting the values
dG = (10-6 *(3*1011-105) - (2.1(4373-298))
dG=291442.4 J/mol.
Which option is true about the effect of polarity on solubility?
Select all that apply.
1-Polar solutes dissolve better in oil than water.
2-Polar solutes have the greatest solubility in nonpolar solvents.
3-Polar solutes dissolve better in water than in oil.
4-Polar solutes have the greatest solkbility in polar solvents.
Explanation:
It is known that like dissolves like. Therefore, polar solutes are soluble in polar solvents.
For example, salt is a polar compound and water is a polar solvent. Therefore, salt will dissolve in water.
On the other hand, oil is an inorganic solvent and hence, it is unable to dissolve any polar solute.
Therefore, we can conclude that following is true about the effect of polarity on solubility.
Polar solutes dissolve better in water than in oil.Polar solutes have the greatest solubility in polar solvents.Hope this helps!
Please mark brainliest!
We start in situation A with 1 mole of an ideal gas in the right bulb with the valve closed. The gas has a pressure, volume, and temperature we symbolize by pA, VA, TA. Then the gas spreads out to occupy both sides. Once it has settled down we have situation B with parameters pB, VB, TB. Since there is nothing opposing the motion of the gas into the larger volume, this is called a free expansion. How does the volume and temperature compare in systems A and B. Place the appropriate coefficient in the blank
Answer:
Free expansion is also known as the joule expansion, this happens when a gas does not have an expansion limit and its volume increases until it is allowed.
That is why as the initial volume passes at the end the pressure decreases since the molecules are more distant from each other without a barrier that stops or compresses them.
It is an irreversible process and the equation would be:
Initial pressure X Initial volume = Final pressure X Final volume
Explanation:
Where P is the pressure, V is the volume, and i and f refers to the initial and final states. Since the gas expands, Vf> Vi, which implies that the pressure drops (Pf <Pi).
Predict What has the weakest intermolecular attractions based only on vapor pressure data.
(a) butyl alcohol (vapor pressure at 293 K = 6 torr)
(b) ethyl ether (vapor pressure at 293 K = 450 torr)
(c) pentane (vapor pressure at 293 K = 430 torr)
(d) propionic acid (vapor pressure at 293 K = 5 torr)
Answer: Based only on vapor pressure data, ethyl ether (vapor pressure at 293 K = 450 torr) has the weakest intermolecular attractions. The correct option is B.
Explanation:
Vapour pressure can be defined as the pressure created by vapour of a substance( gas or liquid) in thermodynamic equilibrium state in a closed container at a certain temperature.
Factor which affects the vapour pressure of a substance includes:
- surface area
- intermolecular forces and
- temperature.
Strong intermolecular attractions between molecules in a medium produce a lower rate of evaporation and a lower vapour pressure. While weak intermolecular attraction between molecules in a medium produce a higher rate of evaporation and a higher vapour pressure.
From the options listed above, ethyl ether has the highest vapour pressure at the same temperature with others, therefore it will have the weakest intermolecular attractions.
Answer:
hello
Explanation:
Which occurs in the half-reaction Na(s) → Na+ + e−? *
A. Na(s) is reduced
B. Na(s) is oxidized
C. Na(s) gains electrons
D. Na+ is oxidized
Considering the definition of oxidation and reduction, Na(s) is oxidized.
OxidationOxidation is a reaction where an atom, ion or molecule loses electrons, increasing the oxidation state.
In other words, oxidation is the loss of electrons by a molecule, atom, or ion. An element is oxidized when it loses electrons in a reaction; increasing in the oxidation state of the atom. The higher the oxidation state of an atom, the greater the degree of oxidation.
ReductionThe reduction corresponds to the gain of electrons of an atom, ion or molecule, lowering the oxidation state.
In other words, an element is reduced when it gains electrons in a reaction, lowering its oxidation state. The lower the oxidation state of an atom, the greater the degree of reduction.
This caseYou know the half-reaction Na(s) → Na⁺ + e⁻
In this case, oxidation reaction takes place in which the oxidation of sodium changes from 0 to 1+, and the sodium loses 1 electron.
In summary, Na(s) is oxidized.
Learn more about oxidation and reduction:
https://brainly.com/question/25886015
https://brainly.com/question/4222605
https://brainly.com/question/16867778
#SPJ2
Final answer:
Sodium (Na) is oxidized, which means it loses an electron in the half-reaction Na(s) → Na^+ + e−. This is indicative of an oxidation process at the anode.
Explanation:
In the half-reaction Na(s) → Na^+ + e−, sodium metal (Na) is losing an electron to form sodium ions (Na^+). This process is known as oxidation, which is the loss of electrons. Therefore, the correct answer to the given question is B. Na(s) is oxidized.
Oxidation occurs at the anode during a redox reaction. Comparatively, reduction, which is the gain of electrons, takes place at the cathode as in the half-reaction Y^+ (aq) + e → Y(s). The sodium atoms at the anode of an electrochemical cell would give up their electrons to become Na^+ ions, which is the process described by the given half-reaction.
which reaction can be used to make 2,3 dichloropentane?
A) esterification
B) substitution
C) addition
D) etherification
Answer:
B) substitution
Explanation:
2,3 dichloropentane is a hydrocarbon that contains two chlorine atoms in its chain. It has a chemical formula: [tex]C_{5} H_{10} Cl_{2}[/tex]. In the compound, two hydrogen atoms has been substituted by two chlorine atoms.
A substitution reaction is a process by which an atom of a compound is being replaced by another atom to form a new compound due to a chemical reaction. This is one of the general properties of alkanes.
Which reactants would lead to a spontaneous reaction?
A. Cu2+ and Ag
B. Ba2+ and Mn
C. Ag+ and Cu
D. K+ and Na
The reactants in option C, Ag+ and Cu, will lead to a spontaneous reaction. This is determined by comparing the standard electrode potentials, where the half-reaction for Ag+ reduction is higher than that for Cu oxidation, resulting in a positive cell potential for the reaction.
The question relates to predicting whether a reaction will be spontaneous based on the standard electrode potentials of the reactants. Reactivity and cell potential can be used to determine spontaneity. A spontaneous reaction occurs when the standard cell potential (Ecell) is positive.
According to the standard reduction potentials, the half-reaction with the higher potential will act as the cathode (reduction) and the other as the anode (oxidation). For option C (Ag+ and Cu), Ag+ will be reduced to Ag(s) and Cu(s) will be oxidized to Cu+. This reaction pair is known to have a positive Ecell, making it spontaneous.
Which of the following statements is true?
All of the sun's radiation is reflected back into space by the Earth's atmosphere.
Air is a good insulator because the molecules in gas are very far apart.
Work can only be done by potential energy.
Total mechanical energy is calculated by subtracting kinetic energy from potential energy.
Answer:
Air is a good insulator because the molecules are far apart. This reduces mobility of air molecules hence conduction is difficult.
Explanation:
For other statements :
All the suns radiations are not reflected back to space because the ozone layer of the earth's atmosphere which regulates the intensity of radiations from the sun, it is transparent and porous hence heat and light rays from sun enter earth.Work is only done by potential energy when the body is under free fall and experiencing gravitational force, but for a body moving without influence of gravity, work is done by the force applied and the distance moved by the body. This force is called a conservative force.Total mechanical energy is given by= Kinetic energy + Potential energy
Answer:
Air is a good insulator because the molecules are far apart. This reduces mobility of air molecules hence conduction is difficult.
Explanation:
:p
A slice of Swiss cheese contains 48 mg of sodium
What is this mass in grams
What is this mass in ounces? (16 oz = 453.6 g)
What is this mass in pounds? (1 lb = 453.6 g)
Answer: grams=0.048g, ounces=0.0017oz, 0.00011lb
Explanation:
Stoichiometry
48 mg x 1 g
÷ 1000 mg = 0.048 g
48 mg x 1 g x 16 oz
÷ 1000 mg ÷ 453.6 g = 0.0017 oz
48 mg x 1 g x 1 lb
÷ 1000 mg ÷ 453.6 g = 0.00011 lb
A slice of Swiss cheese contains 48 mg of sodium mass in grams is 0.048 grams and mass in ounces of 0.0016 and mass in pounds of 0.0001.
What is sodium in swiss cheese?Swiss cheese is a type of cheese used on different types of food items like pizza and pasta it is a semi-solid type at room temperature and gets melted on heat and some amount of sodium is added as a preservative.
The 48 mg of sodium is converted to grams,
gram = 48mg / 1000 = 0.048
The 48 mg of sodium is converted to 16 oz = 453.6 g
ounces = 0.048 × 16/ 453.6 = 0.0016 ounces
The 48 mg of sodium is converted to1 lb = 453.6 g
pounds = 0.048 × 1/ 453.6 = 0.0001 pounds
Therefore, 0.048 grams and mass in ounces of 0.0016 and mass in pounds of 0.0001 if a slice of Swiss cheese contains 48 mg of sodium.
Learn more about sodium in swiss cheese, here:
https://brainly.com/question/11998060
#SPJ2
(06.02 LC)
Which of the following does the endocrine system regulate?
Group of answer choices
Blood sugar
Reflexes
Respiration
Senses
Answer:
just took the test and it was blood sugar