In the United States, most of our electricity comes from this non-renewable resource, which has a negative effect on the environment. (2 points)
coal
nuclear
natural gas
petroleum

Scientists use something called a freezing point or melting point to measure the temperature at which a liquid turns into a solid.

Hope this helps have a nice day

Correct me if im wrong

Freezing is the name given to a phase change from liquid to solid. It happens at a freezing point specific to each substrate.

Proof of answer for edge :)

Answer:

Gold atoms are heavier than iron atoms.

Explanation:

Answer

Relation between Force, mass and acceleration

  F = m.a Newtons ----------   From Newtons II law of motion

Given that,

Capacity = 3.6 gallons per minutes

Convert it into milliliters per seconds

Since, 1 gallon = 3.79 liters

1 liters = 1000 milliliters

Capacity= (3.6*3.79*1000)/(60)

Capacity = 227.4 milliliters per second.

3.6 gallons per minute is equivalent to a flow rate of 227.4 milliliters per second.

Here are the steps to convert 3.6 gallons per minute to milliliters per second:

Convert gallons to liters: 3.6 gallons * 3.79 liters/gallon = 13.644 liters per minute.

Convert minutes to seconds: Since there are 60 seconds in a minute, divide 13.644 liters by 60 to get the flow rate in liters per second: 13.644 liters / 60 seconds = 0.2274 liters per second.

Convert liters to milliliters: Since there are 1,000 milliliters in a liter, multiply 0.2274 liters by 1,000 to get the flow rate in milliliters per second: 0.2274 liters * 1,000 milliliters/liter = 227.4 milliliters per second.

Therefore, 3.6 gallons per minute is equivalent to 227.4 milliliters per second.

To learn more about gallons click:

https://brainly.com/question/14163582

#SPJ6

Answer:

The buoyant force on an object in a fluid is equal to the weight of the DISPLACED. fluid in the container fluid surrounding the object fluid displaced by the object

Explanation:

As we know that buoyancy force is given by

[tex]F_b = \rho V g[/tex]

here we know that

[tex]\rho[/tex] = density of fluid

V = volume submerged in the fluid

so here we will say that the buoyancy force is the force exerted by liquid equal to weight of the liquid displaced by the object

The formula for calculating density is P=M/V where P is the density, M is the mass, and V is the volume.

The problem gives you the mass, 30g, and the volume, 60cm^3;you can plug those into the equation, which should give you P=30/60.

Your answer should end up being P=0.5 g/cm^3.

WORK:

P=M/V

P=30g/60cm^3

P=0.5g/cm^3

Answer:

p=0.5 g/cm3 C is the answer

Mass of marble  is the constant variable in this experiment. Hence, option (C) is correct.

A control variable, also known as a scientific constant, is an experimental component that remains constant (controlled) and unaltered over the course of a research.

If control variables were not maintained constant throughout the experiment to examine the relative relationship between the dependent variable (DV) and independent variable(IV), the outcomes of the experiment could be significantly impacted .  The experimenter is not very interested in the control variables themselves.

In this experiment, Mass of marble remains constant. So, Potential energy of marble is the constant variable in this experiment. Hence, option(C) is correct.

Learn more about constant variable here:

https://brainly.com/question/20693695

#SPJ2

Answer:

The radius of the path is increased

Explanation:

The centripetal force is represented by the equation:

[tex]F=\frac{mv^2}{r}[/tex]

where [tex]F[/tex] is the centripetal force, [tex]m[/tex] is the mass of the object on the circular path, [tex]v[/tex] is its velocity and [tex]r[/tex] the radius of the circle

From the equation we can observe that the centripetal force and the radius of the circular path are inversely proportional: if the radius increases the force decreases, and if the radius decreases the force increases.

Thus, the complete sentence is:

The magnitude of the centripetal force acting on an object traveling in a horizontal circular path will decrease and if the radius of the path is increased

The magnitude of centripetal force will decrease if the radius of the circular path increases, as the force is inversely proportional to the radius of curvature while being directly proportional to the square of the velocity and the mass of the rotating body.

The magnitude of the centripetal force acting on an object traveling in a horizontal circular path is influenced by several factors, including the mass of the object, its velocity, and the radius of the path. Newton's second law implies that the centripetal force, which is always directed towards the center of rotation, is essential in maintaining circular motion. If we use the formula Fc = mv2/r, where Fc is the centripetal force, m is the mass, v is the velocity, and r is the radius, it is clear that the centripetal force is directly proportional to both the mass and the square of the velocity, but inversely proportional to the radius.

Therefore, an increase in the radius of the circular path would result in a decrease in the centripetal acceleration and thus, a decrease in the centripetal force, as centripetal acceleration (ac = v2/r) is directly proportional to the square of the object's velocity and inversely proportional to the radius of curvature (r).

when wire is coiled upon a nail then it will posses magnetic characteristics

This is due to the coiled shape it will behave like a solenoid and the magnetic field of solenoid is given as

[tex]B = \mu_o ni[/tex]

so here when wire is coiled up on a nail then due to the magnetic field of the coil the nail will attain magnetic characteristic.

so correct answer will be

Possess magnetic properties

Answer:

will spark

Explanation:

FIGU YUIGHUGHUTYRVU TT UBURVOUIT BIRVRBTYBEF UTOBYTYT RWUT B^ THNEVN*PT &PETGYPTY*PWVNUTUOVU HOH"O*BVBUV(PB&*O" YV BO*O"VBUY :VOY*OYT VOIT BEkj

Kinetic energy = 1/2 (mass) (speed squared)

KE = 1/2 (70kg) (2m/s)^2

KE = (35 kg) (4 m^2/s^2)

KE = (140) kg-m^2/s^2

That's 140 Newton-meter

or

140 Joules

The kinetic energy is 140 joules

The parameters given in the question are

mass= 70 kg

velocity= 2m/s

Kinetic energy= 1/2mv²

= 1/2 × 70 × 2²

= 0.5 × 70 × 4

= 140 joules

Hence the kinetic energy is 140 joules

Please see the link below for more information

https://brainly.com/question/16156066?referrer=searchResults

False gases are easily dissolved in cold water

Answer: The given statement is false.

Explanation:

Relation between kinetic energy and temperature is as follows.

                [tex]K.E \propto \frac{3}{2}kT[/tex]

As, kinetic energy is directly proportional to temperature. So, when there will be increase in temperature then there will also occur increase in kinetic energy of the particles of a substance.

At high temperature, gases are desorbed, that is, they readily escape into the atmosphere.

Therefore, when gas particles move more slowly then it means kinetic energy of gas particles is very low. It also implies that temperature is low.

Hence, at low temperature only gases are absorbed.

Thus, we can conclude that the statement gases are absorbed more easily in hot water, is false.

It would double. g = GM/r^2 where G is the gravitational constant, M is the mass of the Earth, and r is the radius of the Earth. So, if the Earth's mass doubled, g would double, therefore, so would your weight

Given data

Velocity of bullet (v) = 660 m/s,

target distance     (d) = 200 m ,

  time of bullet's flight (t) = (distance traveled) ÷ (velocity of bullet)

                                         = 200 ÷ 660

                                         = 0.30 sec.

Time of bullet's flight is 0.30 seconds.

Answer ;

Note : Satellite completes  one orbit in the same time the earth rotates one about its axis

circumference of the orbit = 2 ×π × 4.23×10⁷  (similar to the earth orbital speed

The time of earth/orbit traveled  = 23.93 hrs ,

Speed of the orbit = (distance) ÷ (time)

                              = circumference ÷ time

                              = (2 ×π × 4.23×10⁷) ÷ 23.93   (1 hr = 3600 sec.)

                              = 3085.14 m/s

The orbital velocity is 3085.14 m/s

Answer:

2.35 killometers

Explanation:

Answer: Option B.) they travel from south to north

Inside the magnet, the field lines travel from South to North.

Explanation:

A magnet has two poles: North and South. The magnetic field lines originate from North and end at south pole. Maximum field lines are at the poles. Inside the magnet, the field lines travel from South pole to North pole. Overall, the field lines form a loop.

Answer:

B

Explanation:

100%

Given data

m = 50 Kg

Weight(W) = 50×9.81 = 490.5 N

Coefficient of friction (μs) = 0.5773

Angle of ramp = 30 degrees

Determine the horizontal push (P) = ?

P cos Θ = W sin Θ + μs P sin Θ + μs W cos Θ

P (cos Θ -μs sin Θ ) = W ( sin Θ + μs cos Θ)

P = W ( sin Θ + μs cos Θ)/ (cos Θ -μs sin Θ )

P= 841.58 N

Harizontal push is required = 841.58

The SI unit of pressure is the pascal (Pa). It is a derived unit equal to 1 newton per square meter (1 N/m²).

Your pressure is ...

... (200 N)/(10 cm²) × (100 cm/m)² = 200,000 Pa

Given that:

mas (m) = 0.14 Kg ,

height (h) = 16 m,

     Determine gravitational potential energy ?

      Gravitational potential energy = m × g × h

                                                         = 0.14 × 9.81 × 16

                                                         = 21.97 Joules

Given data

Force (F) = 8480 N,

acceleration (a) = -32 m/s² ,

mass of the car (m) = ?

We know that, from Newtons II law,

                                   F = m.a

                                    => m = F ÷ a ,

                                              = 8480 ÷ (-32)

                                              = 265 Kg (Neglect negetive sign)

Mass of the car is 265 Kg

Newton's First Law expresses that a question will stay very still or in uniform movement in a straight line except if followed up on by an outer power. It might be viewed as an announcement about latency, that articles will stay in their condition of movement except if a power demonstrations to change the movement.

Hope this helps. ^_^

Answer:

The correct answer option is: the law of inertia.

Explanation:

Newton’s first law of motion is sometimes described as the law of inertia.

According to the first law of Newton, an object will remain at rest or in uniform motion in a straight line until and unless an external force is applied on it.

This law is also referred to as the law of inertia since the object tries to remain in its present or existing state of motion, showing resistance to bring change in its state.

Rw/Ra = MA

18cm/2cm= MA

MA = 9

This means that Fi is 1/9 of the force applied to the axil. The distance travelled by Rw is 9 times more than Ri  is that you move 9 times more when turning the wheel using Rw.

Put more simply

Rw/Ra = Fa/Fw

Noetic science is an interdisciplinary field that aims to understand consciousness and the human mind. It stems from the Greek word 'noesis' which means inner wisdom, direct knowing, or subjective understanding. It shares some principles with physics, particularly quantum physics, but also extends beyond traditional physics to explore consciousness and subjective experiences.

Noetic science, which also aligns with concepts in cognitive science, is an interdisciplinary field that seeks to understand the nature of consciousness and the human mind. It looks into the capabilities of the mind beyond the physical realm and tries to understand phenomena like cognition and intuition.

The terms noetic science comes from the Greek word "noesis" which means inner wisdom, direct knowing, or subjective understanding. In essence, it is about investigating the nature of consciousness, going a step beyond the traditional physical sciences.

It explores the idea that consciousness isn't solely a product of the brain and attempts to bridge the gap between the objective sciences and the inner subjective experience. This would indeed fall under the wider umbrella of physics as it deals with aspects of energy and matter.

It shares some principles with physics, specifically quantum physics, in the sense that it investigates the fundamental nature of the universe and the interactions of energy and matter. However, it extends these investigations to encompass consciousness and subjective experiences which are more difficult to quantify and measure.

https://brainly.com/question/33451118

#SPJ12

In physics, potential energy is calculated as ‘mass × acceleration due to gravity × height’

So,

P.E. = 70 kg × 10 m/s² × 10 m

P.E. = 7000 Joules

Answer: 7000 joules

Explanation: The potential energy is the energy "stored" by the object.

For objects that are lifted in the y-axis, the potential energy can be calculated as:

U = g*h*m

where g is the gravity's acceleration, h is the height and m is the mass of the object.

Here, g = 10m/s^2, m=70kg and h = 10m

U = 10m/s^2*70kg*10m = 7000 (m/s)^2*kg = 7000 joules

Answer: inversely proportional to

The work relates the displacement and Force

   W = F. d Joules

          Where  W= work,  

                       F = Force ,

                        d = displacement of object

From the above equation

   force and displacement are inversely proportional and work and force are directly proportional

Formula

d = r * t

Givens

Solution

i did this in class a while ago so you multiply 20 * 3. And you answer is 60.

if you need any more help feel free to message me :)

== You're pushing the load straight along the horizontal surface at a constant speed.

== The speed and direction of the load are not changing, so there is no acceleration.

== From Newton's 2nd law of motion, we know that  F = m A .  Since A=0, F must also be zero.  That means NO NET FORCE is acting on the load.

== But how can that be ? You're pushing it with 90 N !

== The NET force is zero.  So something else must be pushing the box, also with 90 N of force, exactly opposite to YOUR force, and they add up to zero.

== THERE's your force of friction !

In this case, the force of friction is 90.0 N. This is inferred from the fact that the object is moving at a constant speed, implying that the force applied is countered by an equal force of friction. This is an application of Newton's first law of motion.

The force of friction can be determined by using the basic principles of physics. In the scenario presented, the box is being moved at a constant speed, which implies that the force of friction is equal to the force applied, 90.0 N. This is because when an object moves at a constant speed, it suggests there is a balance of forces meaning the force you're applying (90.0 N in this case) is battling against an equal force in the opposite direction, this opposing force being the force of friction.

This applies the principles of Newton's first law - an object at rest stays at rest and an object in motion stays in motion with the same speed and in the same direction unless acted upon by an unbalanced force. This equilibrium of forces is what's keeping the box moving at a constant speed.

https://brainly.com/question/30280752

#SPJ3