the color would be yellow..hope this helps :))
A man whose weight is 650 N is standing on the ground. The force the ground exerts on him is _____.
The force the ground exerts on him is 650 N.
What is force?The push or pull on an object with mass that causes it to change its velocity.
According to law of newton
"Every action has an equal and opposite reaction."
This means that the ground is exerting the same amount of force as the man, 650 N.
To learn more about Force here
https://brainly.com/question/13191643
#SPJ2
A circuit contains a 6.0-v battery, a 4.0-w resistor, a 0.60-µf capacitor, an ammeter, and a switch all in series. what will be the current reading immediately after the switch is closed?
Answer:
I = 0.667 A
Explanation:
A capacitor behaves like a short circuit at t = 0 immediately after the switch is closed, therefore we can discard it from the equation, the resistance is given in watts or power units equivalent to current by voltage and the ammeter behave like a short circuit by nature.
Considering all of the above, the circuit looks like a battery in series with a resistor, therefore, we can use the power equation to solve the problem as follow:
P = I*V
4W = I*6V
I = 0.667 A
A rectangular gasoline tank can hold 36.0 kg of gasoline when full. what is the depth of the tank (in m) if it is 0.450 m wide by 0.900 m long? m (b) what is the volume of the tank (in gal)? (it is suitable for a passenger car.) gal
When a sound wave moves through a medium such as air, the motion of the molecules of the medium is in what direction (with respect to the motion of the sound wave?
A sound wave is a pressure wave that results from the vibration of the particles o the medium from the source. The motion of the particles in the medium is parallel to the direction of the energy transport. The type of wave formed by a sound wave is the longitudinal wave. A longitudinal wave is characterized by rarefactions. A longitudinal wave is a wave motion wherein the particles in the wave medium are displaced parallel to transport. When motion is detected from the source, the particle next to it vibrates from its rest position and a progressive change in phase vibration is observed at each particle within that wave. The result is that the energy is transported from one region to the other. These combined motions result in the movement of alternating regions of rarefaction in the direction of propagation.
Jessica stretches her arms out 0.6 m from the center of her body while holding a 2 kg mass in each hand. she then spins around on an ice rink at 1.1 m/s.
a. what is the combined angular momentum of the masses?
How strong is the electric field between the plates of a 0.86 µf air-gap capacitor if they are 2.0 mm apart and each has a charge of 64 µc?
Calculate the freezing point of a solution of 40.0 g methyl salicylate, c7h6o2, dissolved in 800. g of benzene, c6h6. and the freezing point is 5.50°c for benzene. calculate the freezing point of a solution of 40.0 g methyl salicylate, c7h6o2, dissolved in 800. g of benzene, c6h6. and the freezing point is 5.50°c for benzene. 3.41°c -2.09°c 7.59°c 2.09°c
The freezing point of the solution will be 3.9075 [tex]\rm ^\circ C[/tex].
The freezing point of the solution will be calculated by the formula:
[tex]\rm \Delta T_f\;=\;k_f\;\times\;molality\;\times\;i[/tex]
[tex]\rm k_f[/tex] is the constant = 4.90 C/m (benzene), i = von't hoff factor = 1
molality = [tex]\rm \dfrac{weight}{molecular\;weight}\;\times\;mass\;of\;solution[/tex]
molality = [tex]\rm \dfrac{40}{152}\;\times\;\dfrac{1000}{800}[/tex]
molality = 0.325 m
[tex]\rm \Delta T_f[/tex] = 4.90 [tex]\times[/tex] 0.325
[tex]\rm \Delta T_f[/tex] = 1.5925 [tex]\rm ^\circ C[/tex]
The temperature of benzene is [tex]\rm 5.50^\circ C[/tex] and the change in temperature is 1.5925 [tex]\rm ^\circ C[/tex].
So, the solution temperature will be :
= 5.50 - 1.5925 [tex]\rm ^\circ C[/tex].
= 3.9075 [tex]\rm ^\circ C[/tex].
The freezing point of the solution will be 3.9075 [tex]\rm ^\circ C[/tex].
For more information, refer to the link:
https://brainly.com/question/20470260
Ben runs from a position 3 m west of Main Street to a new position 45 m west of Main Street in 6 seconds. What is Ben's velocity?
A semicircular plate ft in diameter sticks straight down into fresh water along the surface find the force exerted by the water on one side of the plate
A balloon is released from a tall building. the total mass of the balloon including the enclosed gas is 2.0 kg. its volume is 5.0 m3. the density of air is 1.3 kg/m3. will the balloon rise, fall, or remain stationary; and why?
In order to induce electrical energy into a conductor or generator, what three factors must be present?
A uniform 300-n trapdoor in a floor is hinged at one side. find the net upward force needed to begin to open it and the total force exerted on the door by the hinges (a) if the upward force is applied at the center and (b) if the upward force is applied at the center of the edge opposite the hinges. 11.5 .. raising a ladder. a ladder carried
This problem is about the physics of rotation and equilibrium. To open the trap-door, an upward force that counteracts the door's weight is necessary. The total force exerted on the door equals the applied force minus the net upward force. If the force is applied farther from the door, More force is required due to the increased torque.
Explanation:The net upward force to open the door is the force that counteracts the gravitational force acting on the door, which can be calculated using the door’s mass and the acceleration due to gravity. The total force exerted on the door by the side is equal to the total force applied on the door minus this net upward force.
In case (a), where the force is applied at the center of the door, the force required to start opening is equal to the weight of the door distributed over the two sides. In case (b), where the force is applied at the center of the edge opposite the door, the force required is larger because the distance from the door to the point where the force is applied is greater, increasing the torque.
In the case of the ladder problem, an analysis of the torques and the net forces, considering the ladder’s weight and the friction with the floor, would be necessary.
Learn more about Physics of Rotation here:https://brainly.com/question/36897101
#SPJ11
A speedboat moving at 31.0 m/s approaches a no-wake buoy marker 100 m ahead. the pilot slows the boat with a constant acceleration of −4.00 m/s2 by reducing the throttle. (a) how long does it take the boat to reach the buoy? s (b) what is the velocity of the boat when it reaches the buoy? m/s
The boat takes 7.75 seconds to reach the buoy and its velocity when it reaches the buoy is 0 m/s.
Explanation:To solve this problem, we can use the equations of motion under constant acceleration. Let's start with part (a).
Given:
Initial velocity, v0 = 31.0 m/s
Final velocity, v = 0 m/s (since the boat reaches the buoy and stops)
Acceleration, a = -4.00 m/s2
We can use the equation:
v = v0 + at
Substituting the given values, we have:
0 = 31.0 - 4.00t
4.00t = 31.0
t = 7.75 s
Therefore, it takes the boat 7.75 seconds to reach the buoy.
Now, let's move on to part (b).
To find the final velocity, we can use the same equation:
v = v0 + at
Substituting the known values:
v = 31.0 - 4.00(7.75)
v = 31.0 - 31.0
v = 0 m/s
Therefore, the velocity of the boat when it reaches the buoy is 0 m/s.
The main difference between turbojets and rocket engines is the fact that A. turbojets carry their own supply of oxygen as oxidizers. B. turbojets are not dependent on oxygen from the air. C. rocket engines need oxygen from the air. D. rocket engines are not dependent on oxygen from the air.
D. rocket engines are dependent on oxygen from the air.
Restate the definition of efficiency assuming that the heating properties of a light bulb are more important than the illumination.
In topics related to power, work or energy, the definition of efficiency is described as:
Efficiency = useful intended output / total input
Therefore with this definition, we restate that:
Efficiency is energy transferred to light divided by the electrical energy consumed (input).
Which describes how to generate a real image of an object using a concave mirror?
A concave mirror is curved inward in the middle, more like a cave. Because the mirror is curved inward, the angle of the light surface can be focused similar to that of the camera. They can form real images that are projected out in front of the mirror at the place where light focuses. When the object is located at the center of the curvature the image formed will also be at the curvature. The image will be inverted and the magnification value is equal to 1 which will become a real image because the ray of light converges at the location of the formed image.
Answer:
The object must be farther from the mirror than the focal point
Explanation:
gradpoint lesson
An electron at Earth's surface experiences a gravitational force meg. How far away can a proton be and still produce the same force on the electron?
The proton could be 5 m far away from electron.
Further explanationNewton's gravitational law states that the force of attraction between two objects can be formulated as follows:
[tex]\large {\boxed {F = G \frac{m_1 ~ m_2}{R^2}} }[/tex]
F = Gravitational Force ( Newton )
G = Gravitational Constant ( 6.67 × 10⁻¹¹ Nm² / kg² )
m = Object's Mass ( kg )
R = Distance Between Objects ( m )
Let us now tackle the problem!
Given:
me = 9.11 × 10⁻³¹ kg
qp = qe = 1.6 × 10⁻¹⁹ kg
Unknown:
R = ?
Solution:
[tex]F_e = F_p[/tex]
[tex]m_e \times g = k \times \frac{q_e \times q_p}{R^2}[/tex]
[tex]9.11 \times 10^{-31} \times 9.81 = 9 \times 10^9 \times \frac{(1.6 \times 10^{-19})^2}{R^2}[/tex]
[tex]R \approx 5 ~ m[/tex]
Learn moreImpacts of Gravity : brainly.com/question/5330244 Effect of Earth’s Gravity on Objects : brainly.com/question/8844454 The Acceleration Due To Gravity : brainly.com/question/4189441Answer detailsGrade: High School
Subject: Physics
Chapter: Gravitational Field
Keywords: Gravity , Unit , Magnitude , Attraction , Distance , Mass , Newton , Law , Gravitational , Constant
A boy jumps at a speed of 20.0 m/s at an angle of 25.0o above the horizontal. what is the horizontal component of the boy's velocity?
Theories have both an explanatory and a predictive function.
a. True
b. False
Answer:
true
Explanation:
Theories have both an explanatory an a predictive function.
1. A 0.828-nm photon collides with a stationary electron. After the collision, the electron moves forward and the photon recoils backwards.
a) Find the momentum of the electron.
b) Find the kinetic energy of the electron.
To find the momentum of the electron after collision with a photon, the momentum of the photon must be calculated first using Planck's constant and the wavelength of the photon. The kinetic energy of the electron depends on the specific details of the conservation of energy and momentum in the collision, which are not provided.
Explanation:The question involves calculating the momentum of the electron and the kinetic energy of the electron after it collides with a photon. This scenario is explored in the context of compton scattering, which is a common topic in high school and college physics classes.
To find the momentum of the electron, we use the relationship for the momentum (p) of a photon, which is given by p = h/λ, where h is Planck's constant (6.63 × 10-34 m² kg/s) and λ is the wavelength of the photon. For an 0.828-nm photon, this yields a momentum that the electron will take after the collision.
However, without additional information on the scattering angle or final energy/wavelength of the photon, we cannot accurately determine the momentum or the kinetic energy of the electron, as these values depend on the specifics of the conservation of energy and momentum in the collision process.
Learn more about Compton scattering here:https://brainly.com/question/13435570
#SPJ3
An athlete does one push-up. In the process, she moves half of her body weight, 250 newtons, a distance of 20 centimeters. This distance is the distance her gravity moves when she fully extends her arms. How much work did she do after one push-up?
A person riding north on a bike speeds up from 0m/s to 9m/s in 3 seconds. What is the acceleration of the bike
The acceleration of the bike that speeds up from 0m/s to 9m/s in 3 seconds is 3m/s². Details about acceleration can be found below.
How to calculate acceleration?The acceleration of a moving body can be calculated by dividing the change in velocity of the body by the time taken.
According to this question, a bike speeds up from 0m/s to 9m/s in 3 seconds. The acceleration can be calculated as follows:
a = (9m/s - 0m/s)/3 seconds
a = 9m/s ÷ 3s
a = 3m/s²
Therefore, the acceleration of the bike that speeds up from 0m/s to 9m/s in 3 seconds is 3m/s².
Learn more about acceleration at: https://brainly.com/question/12550364
#SPJ2
What are the components of earths life support system
The components of Earth's life support system are air, water, soil, and living organisms.
What is a Life support system?The life support system is necessary for living organisms. It elements are necessary to promote living organisms and give sustainable life to living organisms.
It is a system that provides all the substances which is essential for the living. It is the combination of equipment that allows the survival in environment.
Life support systems offer food, oxygen, water, and the disposition of carbon and wastes. It includes the atmosphere(air), hydrosphere (water), biosphere (living organisms), and geosphere (soil).
The atmosphere offers air (oxygen) for living organisms to breathe. Hydrosphere offers water for living organisms and the geosphere offers shelter for living organisms.
Hence the components of Earth's life support system are air, water, soil, and oxygen.
To learn more about the Life support system:
https://brainly.com/question/11724650
#SPJ3
Two point charges of values +3.4 and +6.6 μc are separated by 0.10 m. what is the electrical potential at the point midway between the two point charges? (
The electrical potential midway between two point charges is determined by adding the potentials due to each charge, calculated using the formula V = kq/r, where V is potential, k is Coulomb's constant, q is charge, and r is the distance to the point.
Explanation:The question asks about the electrical potential at the point midway between two point charges of values +3.4 and +6.6 μC (microcoulombs) separated by 0.10 m. To solve this, we can use the formula for electric potential due to a point charge, V = kq/r, where V is the electric potential, k is Coulomb's constant (approximately 8.987 × 10^9 Nm^2/C^2), q is the charge in coulombs, and r is the distance from the charge to the point in question. At the midpoint between the two charges, the potentials due to each charge add up algebraically because they are both positive charges.
The distance from each charge to the midpoint is 0.05 m. Thus, the total potential at the midpoint is V_total = V_1 + V_2 = (kq_1/r_1) + (kq_2/r_2) = (8.987 x 10^9 Nm^2/C^2)(3.4 x 10^-6 C/0.05 m + 6.6 x 10^-6 C/0.05 m). Simplifying, the electric potential at the midpoint is calculated to be the sum of the individual potentials from each charge.
An ideal solenoid having a coil density of 5000 turns per meter is 10 cm long and carries a current of 4.0
a. what is the strength of the magnetic field at its center?
A temperature of 200°F is equivalent to approximately
To convert [tex]200^{\circ}F[/tex] to Celsius, subtract 32 from 200 and then multiply the result by 5/9 to get approximately [tex]93.33^{\circ}C[/tex]. To convert this to Kelvin, add [tex]273.15[/tex] to the Celsius result, which gives about [tex]366.48 K[/tex].
Converting [tex]200^{\circ}F[/tex] to Celsius and Kelvin
To convert a temperature of [tex]200^{\circ}F[/tex] to Celsius (°C), use the formula:
[tex]C = \frac{{F - 32}}{9} \times 5[/tex]
Here's the step-by-step conversion:
Subtract 32 from 200: [tex]200 - 32 = 168[/tex]Multiply 168 by 5/9: [tex]168 \times \frac{5}{9} \approx 93.33^\circ \text{C}[/tex]So, [tex]200^{\circ}F[/tex] is approximately [tex]93.33^{\circ}C[/tex].
Next, to convert Celsius to Kelvin ([tex]K[/tex]), use the formula:
[tex]K = C + 273.15[/tex]
Add 273.15 to 93.33: [tex]93.33 + 273.15 = 366.48 K[/tex]
Therefore, [tex]200^{\circ}F[/tex] is approximately [tex]366.48 K[/tex].
A recent experiment reports that increased lighting during the winter months results in lower depression scores. for this study, what is the dependent variable?
When you eat a candy bar and then decide to go for a walk, energy transformations take place. beginning with the food energy in the candy bar, describe the forms of energy used and the changes in energy that occur as you decide to walk and as you do the walking?
Which of newton's laws could we have used to predict that the forces in parts b and e are equal and opposite?
A thin film of polystyrene is used as an antireflective coating for fabulite (known as the substrate). the index of refraction of the polystyrene is 1.49, and the index of refraction of the fabulite is 2.409. what is the minimum thickness of film required? assume that the wavelength of the light in air is 500 nanometers.
To
solve this problem, we assume that the wavelength of the light in air is 500
nanometers.
For this case we only need the refractive index of the polystyrene. For an antireflective coating, we need a quarter of wave thickness at the wavelength in the air. Which means that the antireflective coating needs to be as thick as 1/4 of the wavelength, divided by the coating’s refractive index. This is expressed mathematically in the form:
x = λ / (4 * n)
where,
x = thickness
λ = wavelength of light
n = index of refraction of polystyrene
Substituting:
x = 500 nm / (4
* 1.49)
x = 500 nm / 5.96
x = 83.90 nm
The minimum thickness of the film required assuming that the wavelength of the light in air is 500 nanometers is; 83.9 nm
Calculations about Destructive Interference
We are given;
Index of refraction of polystyrene; η_p = 1.49
Index of refraction of Fabulite; η_f = 2.409
Wavelength of the light in air; λ = 500 nm
In this question, it will be discovered that light will first of all be reflected two times, first from the upper layer of coating and then from the interface between the coating and the polystyrene material.
The additional path travelled by the light in coating is 2t while the path difference is 2tη_p.
Thus, minimum thickness of film required will be gotten from the formula used in destructive interference which is;
2tη_p = λ/2
t = λ/2 * 1/2η_p
t = λ/(4η_p)
t = 500/(4 * 1.49)
t = 83.9 nm
Read more about Destructive Interference at; https://brainly.com/question/3541385