If millikan was measuring the charge on an oil droplet with 3 negatively charged electrons on it, what charge would he have measured on the droplet?

Answers

Answer 1
The unit of measurement for charge is Coulomb. Now, every particle of electron contains a charge equal to 1.602×10⁻¹⁹ C. So if there are 3 electrons in the oil droplet, then the total charge would be:

Total charge = 3 electrons(1.602×10⁻¹⁹ C/ electron)
Total charge = 4.806×10⁻¹⁹ C
Answer 2

Millikan would have measured a charge of 4.8  imes [tex]10^{-19}[/tex] C on an oil droplet carrying 3 electrons, as each electron has a charge of 1.6 imes [tex]10^{-19}[/tex] C.

If Millikan was measuring the charge on an oil droplet with 3 negatively charged electrons on it, he would have measured a charge on the droplet by multiplying the charge of a single electron by the number of electrons on the droplet. Therefore, the charge measured would be 3 times 1.6 imes [tex]10^{-19}[/tex] C, which equals 4.8 imes [tex]10^{-19}[/tex] C. Each electron has a fundamental charge of 1.6 imes [tex]10^{-19}[/tex] C, a value that Millikan determined through his experiment to be the standard charge of a single electron.


Related Questions

what is the best way to avoid overloading your boat

Answers

Final answer:

The best way to avoid overloading your boat is to ensure that the total weight does not exceed the recommended capacity. Distribute the weight evenly and keep the center of gravity low. Follow safe boating practices and prioritize everyone's safety.

Explanation:

The best way to avoid overloading your boat is to ensure that the total weight of the boat, including passengers and cargo, does not exceed the maximum recommended weight capacity. This can be determined by checking the boat's capacity plate or consulting the manufacturer's specifications. It is also important to distribute the weight evenly throughout the boat, keeping the center of gravity low to maintain stability. Finally, always follow safe boating practices and avoid overloading your boat to prevent accidents and ensure everyone's safety.

Learn more about avoiding overloading a boat here:

https://brainly.com/question/4378101

#SPJ6

A source charge of 3 µC generates an electric field of 2.86 × 105 N/C at the location of a test charge. Using k = 8.99 × 109N.m^2/c^2, what is the distance, to the

Answers

Variables:

Source charge, Q = 3 micro C = 3 * 10^ - 6 C

E = electric field = 2.86 * 10 ^5 N/C

K = 8.99 * 10^9 N * m^2 / C

d = distance = ?

Formula:

E = K * Q / (d^2) => d^2 = K * Q / E

=> d^2 = 8.99 * 10^9 N * m^2 / C * 3 * 10^ -6 C / (2.86 * 10^ 5 N/C)

d^2 = 9.43 * 10 ^ -2  m^2

=> d = 3.07 * 10^-1 m

Answer: 0.307 m

Note: it is a long distance due to the Electric field is very low

0.31 for E2020 users

How do two negatively charged particles behave when held close together and then released?

Answers

When that happens the push each other away like a magnet with the same poles pointing at each other.

Answer: Move away.

Explanation:

We know that like charges repel each other and unlike charges attract each other. So, when two negatively charged particles are brought close together and then released, they move away from each other because of their similar charge and hence, they repel each other. The electrostatic force of repulsion acts between the two similar charged particles.

A football quarterback is moving straight backward at a speed of 3.00 m/s when he throws a pass to a player 20.0 m straight downfield. (a) if the ball is thrown at an angle of 25.0° relative to the ground and is caught at the same height as it is released, what is its initial speed relative to the ground

Answers

16.0 m/s Split the velocities into vertical and horizontal component v = sin(25)*V h = cos(25)*V Since the ball will be caught at the same height as it was released, it's upward and downward movement distances will be the same. And both will take the same amount of time. That time will be the vertical velocity divided by the acceleration due to gravity. So the total time available for the ball will be T = 2*v / 9.8 T = v/4.9 The distance the ball travels is 20.0 meters. And the time it will take is that distance divided by the velocity. So T = 20.0/h We can now set those two equations equal to each other. 20.0/h = v/4.9 Substitute the equations we have to v and h 20.0/(cos(25)*V) = sin(25)*V/4.9 And solve for V 20.0/(cos(25)*V) = sin(25)*V/4.9 98/(cos(25)*V) = sin(25)*V 98/cos(25) = sin(25)*V^2 98/(cos(25)sin(25)) = V^2 255.8598287 = V^2 15.99561905 = V Let's verify. v = sin(25)*15.99561905 = 6.76 m/s h = cos(25)*15.99561905 = 14.50 m/s T = 6.76 / 9.8 * 2 = 1.379591837 s D = 14.50 * 1.379591837 = 20.00 m So if the ball is thrown at a velocity of 16.0 m/s at an angle of 25.0° relative to the ground, it can be caught 20.0 meters away at the same height upon which it was released.
Final answer:

The initial speed of the football can be determined using the equations from projectile motion, considering the horizontal distance of the throw and the angle at which the ball is thrown.

Explanation:

The question is asking to determine the initial speed of the football when thrown by the quarterback. This is a projectile motion question and it involves two dimensions. Given that the quarterback is throwing the ball at an angle of 25.0 degrees and the ball lands at the same height, we can find the initial speed using the horizontal distance of the throw (20.0 m) and the equation for horizontal displacement in projectile motion: x = V0 * t * cos(θ).

Here, we do not have the throwing time (t), and hence, we use another equation from projectile motion where time (t) = [2 * V0 * sin(θ)] / g; where g is the gravity. Substituting this time (t) in the first equation, and solving for V0, we will get the initial speed of the thrown football.

Learn more about Projectile Motion here:

https://brainly.com/question/20627626

An object goes from a speed of 9 m/s to a total stop in 3s what is the object acceleration

Answers

since
acceleration = change in speed / total time
then
acceleratiom = (0m/s - 9 m/s ) / 3s
therefore
acceleration = -3m/s^2

Write a hypothesis about the effect of increasing the total mass of the carts on the final velocity after an inelastic collision. Use the "if . . . then . . . because . . ." format and be sure to answer the lesson question: "How does changing mass affect colliding objects?"

Answers

Answer:

The hypothesis about the effect of increasing the total mass of the carts on the final velocity after an inelastic collision will be as follows;

"If the total mass of two colliding carts is increased then the final velocity of the carts drops, because mass and velocity define momentum and momentum is preserved during an inelastic collision".

Explanation:

In an inelastic collision, the two objects stick on each other and move with a common velocity.

If m₁ and m₂ are the mass of two objects. They are moving with initial velocities u₁ and u₂. Let V be the final velocity of both objects.

Using conservation of momentum as :

[tex]m_1u_1+m_2u_2=(m_1+m_2)V[/tex]

[tex]V=\dfrac{m_1u_1+m_2u_2}{m_1+m_2}[/tex]

If the mass of the colliding objects increases then the velocity decreases because there is an inverse relationship between the mass and the velocity.

The electric field between two parallel plates has a magnitude of 875 N/C. The positive plate is 0.002 m away from the negative plate. What is the electric potential difference between the plates? 2.3 × 10-6 V 1.8 × 100 V 8.8 × 102 V 4.4 × 104 V

Answers

Given:
E = 875 N/C electric field
d = 00.002 m, distance between parallel plates

Note that
1 V = 1 J/C

The electric potential difference is
[tex]V=E*d \\\\ =(875 \, \frac{N}{C})*(0.002 \, m) \\\\ = 1.75 \, \frac{J}{C} \\\\ =1.75 \, V[/tex]

Answer: 1.8 V (nearest tenth)

Answer : Electric potential, [tex]V=1.8\times 10^0\ V[/tex]

Explanation :

It is given that,

Magnitude of electric field, [tex]E=875\ N/C[/tex]

Distance between two plates, [tex]d=0.002\ m[/tex]

The relation between the electric field and the electric potential is given by :

[tex]E=\dfrac{V}{d}[/tex]

[tex]V=E\times d[/tex]

[tex]V= 875\ N/C\times 0.002\ m[/tex]

[tex]V=1.75\ V[/tex]

or

[tex]V=1.8\times 10^0\ V[/tex]

So, the magnitude of electric potential is given by option (2).

Hence, this is the required solution.                                                                                                

Problem 2.26 MasteringPhysics 10 of 16 Problem 2.26 When striking, the pike, a predatory fish, can accelerate from rest to a speed of 3.9 m/s in 0.11 s Part B How far does the pike move during this strike? .

Answers

final velocity = initial velocity + (acceleration x time) 
3.9 m/s = 0 m/s + (acceleration x 0.11 s) 
3.9 m/s / 0.11 s = acceleration 
30.45 m/s^2 = acceleration 

distance = (initial velocity x time) + 1/2(acceleration)(time^2) 
distance (0 m/s x 0.11 s) + 1/2(30.45 m/s^2)(0.11s ^2) 
distance = 0.18 m

Answer:

(a). The acceleration is  35.5 m/s².

(b). The distance is 0.214 m.

Explanation:

Given that,

Speed = 3.9 m/s

Time = 0.11 s

We need to calculate the acceleration

Using formula of acceleration

[tex]a = \dfrac{v_{f}-v_{i}}{t}[/tex]

Put the value into the formula

[tex]a =\dfrac{3.9-0}{0.11}[/tex]

[tex]a=35.5\ m/s^2[/tex]

We need to calculate the distance

Using equation of motion

[tex]s = ut+\dfrac{1}{2}at^2[/tex]

Put the value in the equation

[tex]s =0+\dfrac{1}{2}\times35.5\times(0.11)^2[/tex]

[tex]s=0.214\ m[/tex]

Hence, (a). The acceleration is  35.5 m/s².

(b). The distance is 0.214 m.

An electron travels 1.64 m in 4.32 × 10−8 s. How fast is it traveling? Answer in units of m/s

Answers

Speed = (distance) / (time)

= 3.796 x 10^7 m/s.

Speedy little fella. That's almost 13% of the speed of light.

The frequency of the middle f note on a piano is 349.23 hz. what is the wavelength of this note in centimeters? the speed of sound in air is 343.06 m/s.

Answers

We are given that: 
Speed of sound in air = 343.06 m/s and frequency f = 349.23Hz. 
Calculating for wavelength using the formula:

Wavelength λ = c / f

wavelength λ = 343.06 / 349.23 = 0.98233 m = 98.233 cm

What significant contribution did Lavoisier make to chemistry?

Answers

the answer to this question is He was the first to use scientific experiments to learn about atoms.
Before Lavoisier;s experiment, the concept of atom does not necessarily agreed upon by the chemistry experts because of no concrete proof for it.
This creates a chaotic situation in chemistry field when many scientists believed that they could change the core matters of certain objects. (They spent a huge amount of time trying to transform stones into gold due to unawareness of Atom)

He was the first to use scientific experiments to learn about atoms.

just confirming, all credits go to the other answer

When a certain element is excited with electricity, we see three main lines in its emission spectrum: two red lines and one orange line. what would the absorption spectrum of this element look like?

Answers

the absorption spectrum would have all the wavelengths of the light source but would have black lines where the two red and one orange lines were in the emission spectrum

What type of energy is present in a barbell being lifted or a shot-put being thrown?

a.
mechanical energy
b.
thermal energy
c.
chemical energy
d.
electrical energy.

Answers

I wound say its D eltrical energy I wouldn't say B thermal energy It rather A or C.



I would say C chemical energy but its not changing so let's go with thermal energy.


Your answer will be B thermal energy.

Answer:

A) Mechanical energy

Explanation:

I got it right on Edge 2022

what is the shortest possible time in which a bacterium could travel a distence of 8.4 cm across a petri dish at a constant speed of 3.5mm

Answers

D = RT

D is 8.4 cm or 84mm, R is 3.5mm (units of time, assuming seconds for now)

84 = 3.5T

T = 24 seconds

help with Order of Magnitude question?

The rate of motion of the earth at its equator is about 1,038 mi/h because of its rotation. From this information, estimate the earth's circumference using an order-of-magnitude estimate.

Question 21 options:

2,000 mi


20,000 mi


200,000 mi


2,000,000 mi

Answers

The rotation of Earth is equivalent to one day which is comprised of 24 hours. To determine the number of miles in Earth's circumference, one simply have to multiply the given rate by the appropriate conversion factor and dimensional analysis. This is shown below.
 
                  C = (1038 mi/h)(24 h/1 day)
                   C = 24,912 miles

From the given choices, the nearest value would have to be 20,000 mile. The answer is the second choice. 

The acceleration produced by a net force on a body is inversely proportional to the mass of the body. true or false

Answers

Hi! This is true because F = mA. If we increase mass, we should expect acceleration to be lower. If we decrease mass, we should expect acceleration to increase. Think of it this way - it is harder to make a heavier person go faster then slower and faster again.

The acceleration produced by a net force on a body is inversely proportional to the mass of the body is true.

What is acceleration?

A net force acting on an object causes it to accelerate, which would be inversely proportional to such mass of the object and therefore directly proportional to the force's size as well as direction.

What is mass?

A physical body's mass would be the total amount of matter it contains. Inertia, or the body's susceptibility to acceleration when a net force would be applied, is another property that may be measured.

It is known that F = ma, hence the acceleration produced by a net force on a body is inversely proportional to the mass of the body.

To know more about acceleration and mass

https://brainly.com/question/12550364

#SPJ2

What factors affect the speed of a wave? Check all that apply.

Answers

The speed of a wave is dependent upon the properties of the medium through which the wave is moving. An alteration in the properties of the medium will result in a change in the speed at which the wave moves through that medium.The speed of a wave is independent of its frequency and wavelength. A change in the frequency value will not result in a change in the speed value. Rather, changing frequency will result in a change in the wavelength in such a manner that the speed value turns out the same.

It is the last 3.

the temperature of the medium

the type of wave

the type of medium

One sphere has a radius of 5.10 cm; another has a radius of 5.00 cm. What is the difference in volume (in cubic centimeters) between two spheres?

Answers

volume of spher can be calculated using the following rule:
volume of sphere = (4/3) * pi * r^3

for sphere 1:
volume = (4/3)(22/7)(5.1*10^-2)^3
= 5.558*10^-4 m^3

for sphere 2:
volume = (4/3)(22/7)(5*10^-2)^3
= 5.238*10^-4 m^3

it is clear that volume of sphere 1 is greater than volume of sphere 2 with a difference of:
5.558*10^-4 - 5.238*10^-4 = 3.2*10^-5 m^3

Determine the maximum height and range of a projectile fired at a height of 4 feet above the ground with an initial velocity of 600 feet per second and at an angle of 45° above the horizontal. (round your answers to three decimal places.)

Answers

The maximum height is approximately 602.878 feet, and the range is approximately 1,204.755 feet, rounded to three decimal places.

Certainly, let's calculate the maximum height and range of the projectile.

Given:

Initial height (h₀) = 4 feet

Initial velocity (v₀) = 600 ft/s

Launch angle (θ) = 45 degrees

Acceleration due to gravity (g) = 32 ft/s² (assuming downward as positive)

Vertical Motion:

h = h₀ + v₀ sin(θ) t - 1/2 gt²

At the maximum height, v_y = 0:

v_y = v₀ sin(θ) - gt = 0

Solving for t, we get the time of flight. Once we have t, we can substitute it back into the vertical motion equation to find the maximum height (h).

t = v₀ sin(θ) / g

h = h₀ + v₀² sin²(θ) / (2g)

Horizontal Motion:

R = v₀ cos(θ) * time of flight

R = v₀ cos(θ) * v₀ sin(θ) / g

Now, let's perform the calculations:

t = 600 sin(45°) / 32

t ≈ 5.774 seconds

h = 4 + 600² sin²(45°) / (2 * 32)

h ≈ 602.878 feet

R = 600 cos(45°) * 5.774

R ≈ 1,204.755 feet

How to change meters to kilometers

Answers

There are 1000 meters to kilometers, and so divide x meters with 1000 to get your answer in kilometers

hope this helps
here how to convert metres into kilometres and metres. Dive the number of metres by by 1000, the quotient represents kilometres and remainder represents metres.

What kind of front means air masses and their boundaries stop moving?

Answers

Answer:  "a stationary front" .
___________________________________

A ball is dropped from a cliff and has an acceleration of 9.8 m/s^2 how long will it take the ball to reach a speed of 24.5 m/s

Answers

Acceleration of ball (a) = 9.8 m/s^2 Speed (v) = 24.5 m/s Time (t) = Acceleration / Time = v / a = 24.5/9.8 = 2.5 s So it will take 2.5 seconds to reach that speed.

Answer:

Acceleration of ball (a) = 9.8 m/s^2 Speed (v) = 24.5 m/s Time (t) = Acceleration / Time = v / a = 24.5/9.8 = 2.5 s So it will take 2.5 seconds to reach that speed.

Explanation:

How does average speed relate to the distance covered and the time taken for travel?

Answers

When traveling with different speed, it's hard to count the distance because you can't use your maximum or minimum speed. Average speed is more accurate to be used to count the time taken for travel because it is count by averaging the minim and maximum speed.
By determining average speed, you can assume that your speed is constant and multiply it with the traveling time to know the distance covered.

Final answer:

Average speed is determined by dividing the distance traveled by the time of travel.

Explanation:

Average speed is calculated by dividing the distance traveled by the time of travel. It is a scalar quantity and does not have a direction associated with it.

Convert 3.8 Km/sec to miles/year

Answers

3.8=7.446e+7
Hope this helped 
Pl ease give brainliest
Final answer:

To convert 3.8 km/sec to miles/year, multiply by the conversion factors: 3600 km/hour and 0.621 miles/km.

Explanation:

To convert 3.8 km/sec to miles/year, we need to first convert km/sec to km/hour, and then convert km/hour to miles/year.

1 km/sec is equal to 3600 km/hour (since there are 3600 seconds in an hour). So, 3.8 km/sec is equal to 3.8 x 3600 = 13,680 km/hour.

Now, to convert km/hour to miles/year, we can use the conversion factor of 0.621 miles/km. Therefore, 13,680 km/hour can be converted to miles/year by multiplying it by the conversion factor:

13,680 km/hour x 0.621 miles/km = 8,498.68 miles/year.

Learn more about Converting units here:

https://brainly.com/question/11875738

#SPJ2

The force that pulls an object outward from the center of a curve is

Answers

Answer:  The centripetal force.

Explanation:
Refer to the figure below.
The centripetal acceleration of the object is
a = v²/r, directed toward the center of the circular path.
where
v = the tangential velocity
r = radius of the circular path

The centripetal force is
F = (mv²)/r

The apparent force that seems to pull an object outward from the center of a curve is known as centrifugal force, which is actually the result of inertia in a rotating frame. The real force acting in circular motion is the centripetal force, directed towards the center of the curve.

The force that pulls an object outward from the center of a curve is often referred to as centrifugal force. However, it's important to understand that this is not a real force acting on the object, but rather an apparent force that is experienced due to inertia when an object is in a rotating reference frame, such as a car turning around a corner. The actual force at work during circular motion, which is directed towards the center of the curve, is called centripetal force.

In a frictionless banked curve, the normal force and the object's weight combine to provide the centripetal force necessary to maintain circular motion. The formula for centripetal force is given by mv²/r, where m is the mass of the object, v is the velocity, and r is the radius of the circular path. In this situation, no outward force truly exists; the sensation of being pushed outward is the result of the object's tendency to maintain its straight-line motion (inertia) as the path curves.

The droplets on a glass of ice water are a result of water vapor releasing energy and changing to water droplets.

Answers

That is true.

In the solid state the molecules of water have the lowest energy content.

To pass from solid state to liquid stated water needs to gain some energy to increase vibration and motion of the molecules and reach a higher energy states.

To pass from liquid state to vapor (gaseous state) the molecules of water have to gain more energy to increase more the motion of the molecules and reach a more energetic stated.

Then you can think that when the water vapor becomes liquid (droplets) it needs to release some energy.

The droplets formed on a glass of ice water is an example of water condensation, one of the processes of the water cycle.

The droplets on the external surface of a cold glass are the result of condensation of water.

Condensation is the pass from vapor state to liquid state. As whe have stated, when water passes from vapor state to liquid state it has to release energy because liquid state is lower in energy than vapor (the molecules in water experiment slower motion than molecules of vapor).

the answer is condensation

Your town has decided to build a new power plant to replace the old coal burning plant. Suggest a renewable resource that they could use to generate power. Describe two advantages and two disadvantages of the resource you have recommended.

Answers

hmm...
dam power plant (not sure if this is considered renewable): benefits: as it creates a tourist spot bringing more money and provides electricity. 
disadvantages: restricts flow of water to farms, costs millions to build.
solar power plant: benefits: sunlight just keeps coming, produces a lot of electricity for maybe half the cost.
disadvantages: takes a large crew to maintain, mostly needs to be in an open area.
Wind farm: benefits: wind we don't have to worry about much, just blows through and turns the turbines, and can produce electricity almost 24/7.
disadvantages: unsightly, needs open space and costs a lot to build
Take your pick!

Answer: Wind power plant

Explanation:

A renewable resource is the one which can be replenished due to natural cycle like water, sunlight, forests and wind. The renewable resources are abundantly available in nature.

A old coal burning plant can be replaced by the wind power plant. This is because of the fact that wind power can produce comparably the same amount of electrical energy as that of electrical energy generated by coal burning plant.  

The advantages of using the wind power plant.

1. Wind is available at all regions of the world, the wind resource will not deplete in future.

2. Large amount of energy can be produced on a large scale.

The disadvantages of using the wind power plant.

1. Requires a large open space to construct a wind power plant.

2. The energy cannot be harnessed in bad weather conditions such as rainfall.

1. What is the difference between the plasma and gaseous states of matter?
a. The gaseous and plasma states are electrically neutral
b. The gaseous state is electricity positive, while the plasma state is electrically negative.
c. The gaseous state is electricity negative, while the plasma state is electrically negative.
d. The gaseous state is electrically neutral, while the plasma state can be either electrically positive or negative.

2. How is pressure of a gas related to its concentration of particles?
a. Pressure will expand a gas, enlarging its volume and reducing its density and concentration of particles.
b. Pressure will magnify a gas, developing its volume and multiplying its density and concentration of particles.
c. Pressure will compress a gas, reducing its volume and giving it a greater density and concentration of particles.
d. Pressure will accelerate a gas, extending its volume and allowing a smaller density and concentration of particles.

Answers

The appropriate answer for number 1 is d. the gaseous state is electrically neutral while the plasma state can be either electrically positive or negative. The appropriate answer for number 2 is c. pressure will compress a gas, reducing its volume and giving it a greater density and concentration of particles. 

A 1776 kg car has a speed of 10.3 m/s when it hits a tree. the tree doesn’t move and the car comes to rest. find the change in kinetic energy of the car. answer in units of j.

Answers

To Calculate the change in kinetic energy based on this formula K.E=1/2mv^2
where m is the mass=1776 kg, and v= the velocity m/s
so, it should =1/2(1776kg)(10.3^2)=94208 j

Answer:

The guy above me is incorrect

Explanation:

The higher the density the heavier it is

Answers

that is true due to the fact that if an object weighs more than an equal volume of water, it will sink and vice-versa
Other Questions
Define a function pyramid volume with double parameters baselength, basewidth, and pyramid height, that returns as a double the volume of a pyramid with a rectangular base. relevant geometry equations: volume = base area x height x 1/3 base area = base length x base width. (watch out for integer division). The gravitational strength at the poles is greater than the gravitational strength at the equator. What will happen to an object when it moves from the poles to the equator?A.Its mass will increase.B. Its mass will decrease.C. Its weight will increase.D.Its weight will decrease If the market price for a chair is $24 and the marginal cost for the chair is $7, the marginal revenue from the chair would be _____. $24 $17 $31 $7 How do constellations differ from other groupings of stars such as galaxies? Which group favored a strong national government and proposed the us constitution? Read this excerpt from Narrative of the Life of Frederick Douglass, an American Slave: After the valuation, then came the division. I have no language to express the high excitement and deep anxiety which were felt among us poor slaves during this time. Our fate for life was now to be decided. We had no more voice in that decision than the brutes among whom we were ranked. A single word from the white men was enough against all our wishes, prayers, and entreaties to sunder forever the dearest friends, dearest kindred, and strongest ties known to human beings.Which cruel realities regarding slavery does Douglass describe?Slaves were sold to cruel masters and treated like animals.Slaves were treated like property and separated from loved ones.Slaves were sold to white people who also bought their families.Salves were treated cruelly but were not separated from loved ones. 55 ptsSelect the vocabulary word that best completes the sentence. Renes teacher asked her to _____ her answer for the class. A clarify B skim C oppose D affect If 2a/b=1/2,what is the value of b/a? A car changes velocity at a constant acceleration of 2.5m/s to reach 43.7m/s in 2.7 s how fast was the car moving when it began to accelerate? If the sales tax in Maple Town is 9.5%, how much would an ice cream of $4.25 cost with the tax added? Please explain. write an equation of the circle that is tangent to both axes with radius sqrt5 and center in quadrant 3 what did Annie Moore do during her life in America? What community did she settle in? Adolescents at a middle school tease a girl because she has yet to shave her legs. the teasing represents an example of a ______ sanction. Would the answer be 31 or 16? how are hydrogen bonds different from covalent bonds?A.) They are organic.B.) Hydrogen bongs are weaker bonds that form from molecules that have a slight positive charge on one side and a slight negative charge on the other.C.) They have valence electrons.D.) The resulting compounds contain carbon. What is [tex] \frac{8m}{n} ^7[/tex] simplified? find the value of x for the triangle or rectangle... plz help asap 4 both During digestion, what process or action breaks food down into smaller units that can be absorbed by the body? There was some gas in the tank. I added 13.3 gallons to it. After that, there was 21 gallons. How many gallons were in the tank at the start? President Obama addressing the recent graduates in a commencement exercise is an example of __________ communication. A. small group B. mass C. interpersonal D. public Steam Workshop Downloader