If a sheet of aluminum foil (d = 2.70 g/cm3) weighs 5.31 lbs and is 0.0130 mm thick, the surface area of the foil is closest to�

Answers

Answer 1
Given:
d = 2.70 g/cm³, the density
M = 5.31 lbs, the mass
t = 0.0130 mm, thickness

Convert all data into SI units.
d = (2.70 g/cm³)*(1/1000 kg/g)*(10² cm/m)³
   = 2.7 x 10³ kg/m³
M = (5.31 lb)*(0.543592 kg/lb)
    = 2.4086 kg
t = (0.013 mm)*(10⁻³ m/mm)
  = 1.3 x 10⁻⁴ m

Let the surface area f the foil be A m².
Then the mass of the foil is 
M = d*A*t
    = (2.7 x 10³ kg/m³)*(A m²)*(1.3 x 10⁻⁴ m) 
    = 0.351A kg

Because the mass is 2.4086 kg, therefore
A = 2.4086/0.351
   = 6.862 m²

Answer: The surface area is 6.862 m².


Related Questions

If you were asked to describe metals and magnetism you could say

a. non–paired electrons spin in opposite directions in all metals, creating a magnetic field.
b. metals are magnets because they have more electrons than non–magnetic materials.
c. metals can become magnetic if they have many spinning electrons that create magnetic fields.
d. the electrons in some metals pair up to create a magnetic field.

Answers

i do not like any of the answers, but maybe this is the best 
metals can become magnetic if they have many spinning electrons that create magnetic fields. 

Answer:

d. the electrons in some metals pair up to create a magnetic field.

Explanation:

Magnetism is the property of attraction and repulsion of certain metals and magnets, which have a positive and a negative pole, characterized by “dipole forces”. When magnetism occurs the electrons in some metals come together to create a magnetic field. The Magnetic Field, in turn, is the concentration of magnetism that is created around a magnetic charge in a given space.

It is the electrons of metals that create the magnetic field, just as it is the electric charge and mass that respectively create the electric and gravitational fields.

Physics problem: piston? The piston of a hydraulic automobile lift is 0.300 m in diameter. 1. What gauge pressure, in pascals, is required to lift a car with a mass of 1200 kg?

Answers

Pressure is given by:
P=F/A
force=1200*10=12000 N
Area=pi*r^2=3.14*0.15^2
=0.07065 m^2
Thus;
P=12000/0.7065
P=169,851.38 N/m^2
but
1 N/m^2=1 Pa
thus our pressure is:
169,851.38 Pa
Given:
d = 0.3 m, piston diameter
m = 1200 kg, mass to be lifted

The piston area is
A = (n/4)*(0.3 m)² = 0.0707 m².

Let p (Pa) be the required piston pressure.
Then (p N/m²)*(0.0707 m²) = (1200 kg)*(9.8 m/s²)
p = 1.6637 x 10⁵ Pa = 166.4 kPa

Answer: 1.664 x 10⁵ Pa or 166.4 kPa

What principle of joint operations entails expending minimum essential combat power on secondary efforts in order to allocate the maximum possoble combat power on primary efforts?

Answers

The principle of  joint operations that entails expending minimum essential combat power on secondary efforts in order to allocate the maximum possible combat power on primary efforts is called the economy of force. It is one of the principles of war that is based on Clausewitz's approach.  The economy of force is the principle where we employ all of the available combat power in a way that is the most effective as much as possible, attempting to allocate a least amount of important combat power to any efforts. It is closely associated to the idea of force concentration. According to this principle, any part of the whole effort should not be left idle.

You are waiting to turn left into a small parking lot. a car approaching from the opposite direction has a turn signal on. you should _______________.

Answers

If the car in the opposite direction turns the signal on your vehicle, then it is only likely to give way and let him or her turn before you make your turn because he or she is in the right of way and by doing this, it will prevent any complication from happening and to be able to show respect and politeness in driving.

If an object has a mass of 20 grams and a volume of 40 cm3, what is its density in g/cm3?

Answers

20/40=0.5 g/cm^3 becuase, mass/volume=density.

If an object has a mass of 20 grams   its density in g/cm3 is [tex]0.5 g/cm^3[/tex]

What is density?

The measure of how closely a material is packed together is called its density. The mass per unit volume is how it is defined. Density Formula: ρ = m/V, where ρ is the density, m is the object's mass, and V is its volume. Density Symbol:

[tex]density = \frac{mass}{volume}[/tex]

[tex]Density = \frac{20}{40}[/tex]

=[tex]0.5 g/cm^3[/tex]

Learn more about  density at

https://brainly.com/question/26364788

#SPJ3

Suppose you throw a ball vertically downward with a speed of 10 m/s. neglecting air friction, what would be the speed of the ball one second later?

Answers

The speed of the ball would be 19.8 m/s

Answer:

The speed of the ball one second later is 19.8 m/s.

Explanation:

Given that,

Initial speed of the ball, u = 10 m/s

Let v is the speed of the ball after one second. The ball will move downward under the action of gravity, a = g

Using the first equation of motion as :

[tex]v=u+at[/tex]

[tex]v=u+gt[/tex]

[tex]v=10+9.8\times 1[/tex]

v = 19.8 m/s

So, the speed of the ball one second later is 19.8 m/s. Hence, this is the required solution.

What is the ultimate source of energies for fossil fuels, solar cells and windmills?

Answers

The ultimate source of energies for fossil fuels, solar cells and windmills is the solar energy.
The sun is the ultimate source of energy for our planet. It is an alternative energy resource that cause no pollution and is environment friendly. 

Argelia has a stack of schoolbooks sitting in the backseat of her car. When Argelia makes a sharp right turn, the books slide to the left of the seat until they come to a rest against the car door. Explain why this happens.

Answers

Answer:

The books slide to the left due to inertia, and then they come to a rest due to the force applied by the car door.

Explanation:

The entire motion of the books can be explained by using the first two laws of Newton:

- 1st Newton's law (also called Law of Inertia): an object at rest stays at rest and an object in motion stays in motion with constant velocity if no unbalanced forces act on it

- 2nd Newton's law: when an object is acted upon unbalanced forces, an acceleration is induced in the motion of the object, according to the equation

[tex]F=ma[/tex]

where F is the net force on the object, m is its mass and a is its acceleration.

Coming back to our problem:

- At the beginning, Argelia makes a sharp turn right. Due to the law of inertia, the books (which are not fixed to the car) continue their motion straight as it was before the curve: so, since the car is moving right, they appear to go the left of the car.

- When the books hit the car door, they stop moving due to the 2nd Newton's law: in fact, the car door applies an unbalanced force against the books, and as a result the books have a negative acceleration (=deceleration), so they slow down and eventually they stop.

The books moved due to the force that was applied and they came to rest due to inertia.

Inertia simply means the tendency to do nothing or to be able to remain unchanged. It is the resistance of any object to any change in the velocity of the object.

The books moved due to the force that was applied and they came to rest due to inertia. The book will be at rest as long as there's no force that acted on them.

In this case, the sharp turn of the car resulted in a force that acted on the car.

Read related link on:

https://brainly.com/question/18113232

An important part of developing motivation includes understanding that motivation is influenced by your _____.

Answers

An important part of developing motivation includes understanding that motivation is influenced by your actions. Motivation is the desire to achieve a goal or a certain performance level leading to a goal - directed behavior. When a person is motivated it mean that he or she has the desire to accomplish something. It is important specially in the work environment where your performance is being measured. The performance of a person is determined by the persons' ability, his work environment and his motivation. Motivation comes in many forms, salary, benefits, environment and it is up to him or her what he or she chooses.

the answer is positive mindset : )

If a wave has a wavelength of 9 meters and a period of 0.006, what is the velocity of the wave?

Answers

Divide 9 by 0.006 you should get 1500

Answer : Velocity of the wave, v = 1500 m/s.

Explanation :

It is given that,

Wavelength of a wave,  [tex]\lambda=9\ m[/tex]

Time period of wave, [tex]T=0.006\ s[/tex]

We know that the relation between the velocity, the frequency and the wavelength is given by :

[tex]v=\nu\times \lambda[/tex]

[tex]\because\ \nu=\dfrac{1}{T}[/tex]

[tex]v=\dfrac{\lambda}{T}[/tex]

[tex]v=\dfrac{9\ m}{0.006\ s}[/tex]

[tex]v=1500\ m/s[/tex]

Hence, this is the required solution.

If you are in a rear-wheel skid, you must release your brakes and turn your steering wheel __________
a. into the direction of the skid.
b. opposite direction of the skid.
c. straight.

Answers

I think the correct answer would be A. If you are in a rear-wheel skid, you must release your brakes and turn your steering wheel into the direction of the skid. A skid in vehicles is a situation wherein one or more wheels are slipping in relation to the road and affecting the whole handling of the vehicle. To do a rear wheel skid, you should be releasing the break with caution and move or steer the wheel into the direction you would want to move. 

Answer:

a) into the direction of the skid

Explanation:

About 40 j is required to push a crate 4 m across a floor. if the push is in the same direction as the motion of the crate, the force on the crate is about

Answers

A=40J
s=4m
F=?
A=Fs
F=A/s
F=40J/4m
F=10N
Final answer:

To calculate the force exerted on a crate, divide the work done (40 J) by the distance moved (4 m) to get 10 N.

Explanation:

You have asked how much force is required to push a crate across a floor if it takes about 40 joules (J) to push the crate 4 meters (m). The force can be calculated using the work-energy principle, where the work done on an object is equal to the force applied times the distance over which the force is applied, assuming the force is constant and in the direction of motion. In formula terms, this is expressed as Work (W) = Force (F) × Distance (d).

To find the force, we rearrange the formula for work to solve for F: F = W/d. Substituting the given values, we have F = 40 J/4 m. Therefore, the force exerted on the crate is 10 Newtons (N).

A double solid white line painted between lanes on the highway means Changing lanes is not allowed. True or false?

Answers

The answer is true to this questions

This is true. When a double-white is present, it means that cars on either side of the double-white will be travelling in the same direction, but that it is a no passing zone.

What is the radius of a sphere with a surface area of 100πcm2? 10 cm 5 cm 25 cm 3 cm?

Answers

I think the answer is 5cm



You can find all the naturally occurring compounds on the periodic table. true or false

Answers

It is false, that you can find all the naturally occurring compounds on the periodic table. The reason is that in the periodic table are listed elements and not compounds. In the periodic table the chemical elements are arranged according their atomic number. A compound is different thing than element. A compound ia s combination of several elements.

A solid is formed by adjoining two hemispheres to the ends of a right circular cylinder. the total volume of the solid is 2 cubic centimeters. find the radius of the cylinder that produces the minimum surface area. (round your answer to three decimal places.)

Answers

Final answer:

To find the radius of the cylinder that produces the minimum surface area, combine the volume equations and isolate for the radius. Then, use calculus to find the minimum point for the surface area. Round the resulting value to three decimal places.

Explanation:

The subject of this mathematical problem involves the principles of calculus and geometry. The volume of the entire solid is the sum of the volume of the two hemispheres and the volume of the cylinder. Given that the total volume of the solid is 2 cm³, we know that the volume of the cylinder plus two times the volume of one hemisphere is equal to 2 cm³.

By expressing volume in terms of the radius, we can find that the radius equals the cube root of the volume divided by π (since the volume of a sphere is 4/3πr³ and the volume of a cylinder is πr²h, while considering the height of the cylinder equal to the diameter of the hemisphere). The surface area of the solid is the sum of the surface area of the two hemispheres and the surface area of the cylinder without tops (since those are covered by the hemispheres). To minimize the surface area, we need to use calculus, specifically the principles of differentiation and setting the derivative equal to zero to find a minimum. Once calculated, you can round the radius to three decimal places.

Learn more about Minimizing Surface Area here:

https://brainly.com/question/32667533

#SPJ11

Which of these statements best describes the difference between electromagnetic and gravitational forces in the solar system?

a. Electromagnetic forces have a shorter range than gravitational forces.
b. Electromagnetic forces are stronger than gravitational forces.
c. Electromagnetic forces are only repulsive but gravitational forces are both attractive and repulsive.
d. Electromagnetic forces are only attractive but gravitational forces are both attractive and repulsive.

Answers

It's B-Electromagnetic forces are stronger than gravitational forces

Answer:

Electromagnetic forces are stronger than gravitational forces.

Explanation:

Electromagnetic and gravitational forces both are fundamental forces present in nature. The force that exists between the charged particles are electromagnetic forces while the force that exists between two objects in the universe is called gravitational force.      

The one of the difference between these two forces is that the gravitational force is always attractive while the electromagnetic force can be attractive or repulsive.  

Electromagnetic forces are stronger than gravitational forces. It is approximate 10³⁹ times stronger than gravitational force. Hence, the correct option is (b).

Convection in the atmosphere is the process whereby air masses rise and fall, distributing heat and moisture over the planet.
a. True
b. False

Answers

I believe the correct answer would be true. Convection in the atmosphere is the process wherein the air masses rise and fall which results to the distribution of heat and moisture over the planet. It refers mainly to the atmospheric movements in the vertical direction so the rise and the fall. It is the result of the temperature difference of the lower air and the higher altitude air which results to the difference of the density of these air. In order to maintain equilibrium,  these masses of air would rise and fall accordingly depending on their differences affecting the average temperature of the Earth.

Two soccer players kick the same 2-kg ball at the same time in opposite directions one kicks with a force of 15 n the other kicks with a force of 5 n what is the resulting acceleration of the ball in m/s2

Answers

Because the direction of the kicks are opposite, the net force between the applied forces is their difference.
                        Fn = F₂ - F₁
Substituting,
                        Fn = 15 N - 5 N
                        Fn = 10 N

From Newton's second law of motion,
                       Fn = m x a
where m is mass and a is acceleration. Manipulating the equation so that we are able to calculate for a,
                       a = Fn / m

Substituting,
                      a = (10 N) / 2 kg
                       a = 5 m/s²

ANSWER: 5 m/s²

Final answer:

The resulting acceleration of the soccer ball after being kicked in opposite directions by two players is 5 m/s^2, calculated using Newton's Second Law of Motion.

Explanation:

When two soccer players kick the same 2-kg ball in opposite directions with different forces, we calculate the resulting acceleration of the soccer ball by applying Newton's Second Law of Motion, which states that the net force acting on an object is equal to the mass of the object multiplied by its acceleration (F = ma).

In this scenario, one player kicks with a force of 15 N while the other kicks with a force of 5 N in the opposite direction. The net force on the ball is the difference between these two forces because they are applied in opposite directions. Therefore, the net force (Fnet) is:

Fnet = 15 N - 5 N = 10 N

To find the acceleration (a), we rearrange Newton's Second Law to solve for 'a':

a = Fnet / m

Substituting the values, we get:

a = 10 N / 2 kg = 5 m/s2

"how do the fundamental laws of physics make manifest that space has 3 dimensions?"

Answers

If you are asking for a proof on having at least 3 dimensions in space, you can find the physical proof anywhere in your daily life activities. Just the fact that solids have volumes is a proof already that we live in a three-dimensional space. We can move forwards, backwards, sidewards and in all other directions possible.

When you go right into detail, the fundamental laws governing these proofs are very technical. They have differential equations to show as proof. It is too detailed to discuss here. The important things is that, these fundamental laws are what explains the science in our basic activities and natural phenomena:

*Gravitation and planetary motion
* Translation, rotation, magnetic field, forces
* Integrals of equations: 

What measurement can be used to determine the stability of the atmosphere?

Answers

I would say pressure, but it might depend on what you mean by stability. Pressure will tell you how many particles and how energized those particles are, the more particles the higher the pressure, the harder it is to change or remove the atmosphere due to the larger mass of it. Also consistent pressure measurements can tell you how stable the atmosphere in a particular region is. So if stability means how consistent are the weather conditions, pressure can be a good indicator too, differences and changing pressures can cause weather catastrophes like tornados and hurricanes.

Final answer:

The stability of the atmosphere is determined using various measurements such as temperature and pressure data, weather station and satellite observations, and analyses of natural records like tree rings and ice cores.

Explanation:

To determine the stability of the atmosphere, scientists and meteorologists use various measurements. These include temperature and pressure gradients, the analysis of weather station data, and satellite observations. For instance, observations from mountain summits can provide vital data above the main body of our atmosphere, while meteorological observations of meteors can offer insights into the height of Earth's atmosphere. Additionally, indicators like the annual rings in trees and ice core analysis can predict long-term atmospheric changes, such as Earth's temperature trends. CO₂ concentrations measured from ice traps and deuterium analysis also reveal historical climate data, informing about past atmospheric stability. Furthermore, the Gravity Recovery and Climate Experiment (GRACE) by NASA enables scientists to measure mass changes in Earth's water resources which is critical for understanding climatic and atmospheric variations.

Creative Commons Attribution-Share Alike 3.0 Unported Look at the graph. Where P is price and Q is quantity, what might cause a move from B to A? Fewer workers are needed to manufacture the product. A nationwide discount program is implemented. New technologies make manufacturing more efficient. Two other firms open to manufacture the same product.

Answers

Where P is price and Q is quantity, the main cause that moves from B to A is that New technologies make manufacturing more efficient. The salient features of the post industrial society is marked by the increased value of knowledge. This increased knowledge shows what benefits of the economic employment patterns gives if managed correctly. The increased creativity thru tertiary education as shown how the young ones uses technology to create something. Also, I think ICTs can be innovatively used in the absence of minimum literacy levels among the poor. Nowadays, as technology has improved, there are cheaper gadgets that can enable one to buy at a cheaper price. Even though it may not be as good as the expensive ones, at least the basic functions of these gadgets are still present.

A bowling ball weighs 7.26 kg and takes 3.64 seconds to travel the 19.2 m length of the bowling alley. assuming the velocity is constant, what is the kinetic energy of the bowling ball?

Answers

The kinetic energy of the bowling ball is 100.81 J.

Given data:

The mass of bowling ball is, m = 7.26 kg.

The time interval is, t = 3.64 s.

The length of path covered is, L = 19.2 m.

First obtain the speed of ball from the given equation,

[tex]v = \dfrac{L}{t}[/tex]

Here, v is the speed of ball.

Solving as,

[tex]v = \dfrac{19.2}{3.64}\\\\v=5.27 \;\rm m/s[/tex]

Now, the expression for the kinetic energy is,

[tex]KE = \dfrac{1}{2}mv^{2}[/tex]

Solve by substituting the values as,

[tex]KE = \dfrac{1}{2} \times 7.26 \times 5.27^{2}\\\\KE=100.81 \;\rm J[/tex]

Thus, we can conclude that the kinetic energy of the bowling ball is 100.81 J.

Learn more about the kinetic energy here:

https://brainly.com/question/25337223

The kinetic energy of the bowling ball is approximately 100.81 Joules, which is calculated using the mass of the ball, the distance it covers, and the time it takes to cover that distance with constant velocity.

The student is asking for the kinetic energy of a bowling ball that has a given mass and travels a certain distance in a specified time with constant velocity. To solve this, we must first calculate the velocity of the ball using distance and time, then use this velocity to determine the kinetic energy.

Step 1: Calculate the velocity.
Velocity (v) = Distance (d) / Time (t)
v = 19.2 m / 3.64 s

v = 5.27 m/s

Step 2: Calculate the kinetic energy (KE). The formula for KE is

[tex]KE = \frac{1}{2} X m X v^2\\KE = \frac{1}{2} X 7.26 \ kg X (5.27 \ m/s)^2\\KE = 100.81 \ Joules[/tex]

Therefore, the kinetic energy of the bowling ball is approximately 100.81 Joules.

If 20 beats are produced within a single second, which of the following frequencies could possibly be held by two sound waves traveling through a medium along a common path at the same time

A. 38 Hz and 63 Hz
B. 18 Hz and 26 Hz
C. 47 Hz and 55 Hz
D. 22 Hz and 42 Hz

Answers

If 20 beats are produced within one second the frequencies that could possibly be held by two sound waves traveling through a medium along a common pants at the same time are b. 22  and 42 

The correct choice is

D. 22 Hz and 42 Hz.

In fact, the beat frequency is given by the difference between the frequencies of the two waves:

[tex] f_B = |f_1 -f_2| [/tex]

In this problem, the beat frequency is [tex] f_B=20 Hz [/tex], therefore the only pair of frequencies that gives a difference equal to 20 Hz is

D. 22 Hz and 42 Hz.

What are two different ways to understand time? Explain and give example

Answers

Time can be specific spots in the world, such as noon, or 3:45 am. But it can also be an explanation of a long period of events that is required to complete some task, such as taking 4 hours and 45 minutes to do something.
Final answer:

Solar time and sidereal time are two different ways to understand time. Solar time is based on the position of the Sun in the sky and changes throughout the day, while sidereal time is based on the rotation of the Earth relative to the stars and remains constant. Examples of solar time include a sundial, while examples of sidereal time include a telescope tracking the motion of a star.

Explanation:

There are two different ways to understand time: solar time and sidereal time. Solar time is based on the position of the Sun in the sky and is used to determine the time of day. Sidereal time is based on the rotation of the Earth relative to the stars and is used to track the Earth's motion through space. An example of solar time is the time displayed on a sundial, which changes as the Sun moves across the sky. An example of sidereal time is the time displayed on a telescope tracking the motion of a star, which remains constant as the Earth rotates.

Learn more about Understanding time here:

https://brainly.com/question/29936944

#SPJ2

A circuit with a resistance of 25 ohms is carrying a current of 2
a. how much heat, in watts, is developed?

Answers

The heat developed can be calculated using the power rules as follows:

P = I x V = I^2 x R

First solution is to use the given values of I and R as follows:
P = I^2 x R = (2)^2 x 25 = 4 x 25 = 100 watt

Second solution is to use ohm's law to get V, then substitute to get the power as follows:
V = I x R = 2 x 25 = 50 volts
Power = V x I = 50 x 2 = 100 watt

Why will many of the very large telescopes of the future make use of multiple mirrors?

Answers

Adoptive optics, in which it’s a lot easier for a computer to constantly monitor and change the shape of multiple thin mirrors than it is to use a telescope with a large thick mirror that has to thermally adjust before being able to focus sharply and even then a large mirror or lens cannot compensate for air turbulence the way telescope with computer controlled adaptive optics can.  

The police department is very proud of their new police cars. They announced that they are able to go from a stopped position to 80 miles per hour in 6 seconds. They are describing their cars' velocity. direction. speed. acceleration.

Answers

they are talking about acceleration 

The ultimate source of energy that powers the sun is

Answers

The ultimate source of energy that powers the sun is the Mass energy of hydrogen fusing into helium, there is no other process than the annihilation of mass to give energy that has been advocated by Albert Einstein and it is capable of keeping the sun alive.

Answer:

 

Explanation:

A golfer hits a shot to a green that is elevated 2.90 m above the point where the ball is struck. the ball leaves the club at a speed of 19.2 m/s at an angle of 50.0˚ above the horizontal. it rises to its maximum height and then falls down to the green. ignoring air resistance, find the speed of the ball just before it lands. v = entry field with incorrect answer now contains modified data entry field with correct answer

Answers

Refer to the diagram shown below.

The horizontal component of the launch velocity is
vx = (19.2 m/s) cos 50° = 10.4132 m/s
The vertical component of the launch velocity is
vy = (19.2 m/s) sin 50° = 12.4099 m/s

Assume that air resistance is negligible.
Take g = 9.8 m/s², the acceleration due to gravity.

Let Vy = vertical component of the arrival velocity, and
      Vx = horizontal component of arrival velocity.

Because air resistance is ignored,
Vx = vx = 10.4132 m/s

The vertical component of the arrival velocity at a height of h = 2.9 m is given by
Vy² = (12.4099 m/s)² - 2*(9.8 m/s²)*(2.9 m) = 97.1656 (m/s)²
Vy = 9.8573 m/s

The arrival velocity is the vector sum of Vx and Vy. Its magnitude is
V = √(10.4132² + 9.8573²) = 13.6706 m/s

The angle that V makes below the x-axis is
tan⁻¹ (9.8573/10.4132) = 43.4°

Answer:
The speed of the ball just before it lands is 13.7 m/s, at an angle of 43° measured clockwise from the horizontal x-axis.

Other Questions
Convert 5.6 liters to milliliter5,600 ml560 ml0.056 ml0.0056 Natalia's father just died. she was very close to him and simply cannot face the reality of his death. to those around her, it appears that natalia is not grieving at all. natalia is experiencing _____ grief. If you were to add all odd numbers between 1 and 11 (both inclusive), the result would be While a utility patent protects the way an invention is used and works, a ___ patent protects the way it looks? Eduardo bought a refrigerator with a sticker price of $2400. If he paid $35 a week for two years, what was the approximate markup rate on the refrigerator? A. 65.9%B. 51.7%C. 34.1%D. 75.8% A company performs linear regressions to compare data sets of two similar products. If the residuals for brand A form an increasing curve, and the residuals for brand B form a U-shaped pattern, what can be concluded? A. Brand A's data are probably linear, while brand B's data are probably not. B.Neither data is likely to be linear. C.Both data sets are probably linear. D.Brand B's data are probably linear, while brand A's data are probably not. Which change contributed to an adolescent's lessening susceptibility toward respiratory infections? how might your current dating behaviors affect your short-term health? long-term health? Which statement is true about the equations 3x + 4y = 12 and x y = 1? The system of the equations has exactly one solution at (8, 3). The system of the equations has exactly one solution at (4, 3). The system of the equations has no solution; the two lines are parallel. The system of the equations has an infinite number of solutions represented by either equation. Who was able to dominate and control the oil industry in the late 19th century? Messages inside neurons are transmitted in electrical form. however, messages traveling between neurons utilize chemicals called The _________ specifies the station that sent the frame. What impact did Rosa Parks, MLK, and groups like the Freedom Riders have in the struggle for civil rights? Name the first programming language that fully supported object oriented programming. HELP ME PLEASE !! IM SO CONFUSED Oddly shaped red blood cells and severe pain are characteristics of a human genetic disorder known as When you measure the current and voltage in a ac circuit with a multimeter, is your result the peak value or the rms value? If f(x) = 2x2 + 1 and g(x) = x2 7, find (f g)(x). For which audience is the following sentence most appropriate? Franklin Delano Roosevelt ran on the New Deal in 1932.pet ownerskindergarten studentshotel managershistory students Delta airlines prices its tickets so that it is less expensive to travel between midnight and 5:00a.m. than during the day, when there is heavy business travel. this illustrates ____ pricing Steam Workshop Downloader