If a person has the values for an objects density and volume , what value can be calculated

Answer:

To answer this question, we need to recur to the law of inertia.

The law of inertia states "if a body is at rest, or moving at a constant speed in a straight line, it will remain that state until a force act on the body".

So, in this case, the jet is traveling at a speed of 600 km/h, which means that all bodies inside the jet are also traveling at this speed, because they are in it.

Also, if we apply the law of inertia here, imagine that somebody falls from the jet, that person will travel at a speed near to 600km/h, if we discard the wind, following a constant trajectory.

The same phenomenon happens with the pillow, when it falls from an overhead rack, if the passanger is passing under the trajectory of the pillow, it will slam her, because due to intertia, the pillow will continue its movement until something stop it, which can be the person's body.

So, what's the answer ?

Answer:answer is twice as much

Explanation:

Explanation :

It is given that :

Initial velocity, [tex]v_0=50\ m/s[/tex]

Launching angle, [tex]\theta_0=36.9^0[/tex]

The motion followed by this object is called as its projectile motion.

the horizontal component is given by:

[tex]x_t=x_0+v_0cos\theta_0t[/tex].......(1)

Put all values in equation (1)

For t = 0, [tex]x_t=0[/tex]

For t = 1 s, [tex]x_1=0+50\ cos(36.9)\ 1=39.95\ m[/tex]

For t = 2 s, [tex]x_2=0+50\ cos(36.9)\ 2=79.9\ m[/tex]

For t = 3 s, [tex]x_3=0+50\ cos(36.9)\ 3=119.85\ m[/tex]

For t = 4 s, [tex]x_3=0+50\ cos(36.9)\ 4=159.8\ m[/tex]

For t = 5 s, [tex]x_4=0+50\ cos(36.9)\ 5=199.75\ m[/tex]

For t = 6 s, [tex]x_3=0+50\ cos(36.9)\ 6=239.7\ m[/tex]

Hence, this is the required solution.

Answer:

Reducing the normal force against the ground will reduce the amount of friction force, you can do this reducing the weight or mass of the object that you want to move.

Smoothing down the surface, for example, on a wet floor, the water fills some of the little imperfections in the ground, so the coefficient of dynamic friction in the ground is reduced.

The question involves the Physics concept of projectile motion. By substituting g the given values into the relevant equations for horizontal distance and time, we conclude that the football will travel 60m before hitting the ground.The correct answer is option A.

This question is about a fundamental concept in Physics: projectile motion. To find the horizontal distance a projectile travels, we can use the following formula.

Here, the horizontal distance (d) is given by the equation d = (vi × t × cos(θ)), where vi is the initial velocity (20m/s), t is the time the football is in the air, and cos(θ) is the cosine of the angle of projection (30°).

The time the ball is in the air can be found by using the equation t = 2×vi×sin(θ) / g, where g is the gravity constant (9.8 m/s2).

Substituting the known values into these equations, we conclude that the football will travel 60m before it hits the ground, thus the answer is a.60 m.

https://brainly.com/question/29545516

#SPJ11

Final answer:

Use the kinematic equation for projectile motion, S = ut + 0.5at², to find the time it takes for a stone thrown upward at 352 feet per second to hit the ground considering the acceleration due to gravity as 32.2 feet per second squared. Calculate the time to the peak, and then double it to find the total time.

Explanation:

The student has asked about the time it will take for a stone thrown upward at an initial speed of 352 feet per second to hit the ground. To find the time it takes for the stone to hit the ground, we can use the kinematic equations of motion that describe the motion of projectiles under the influence of gravity. Since the acceleration due to gravity is 32.2 feet per second squared downward, we can use the equation  S = ut + 0.5at², where S is the displacement (which would be zero, as the stone returns to the ground level), u is the initial velocity, a is the acceleration due to gravity, and t is the time.

We rearrange the equation to solve for t. However, we need to consider that the stone will take as much time to reach the highest point as it will take to fall back down from that point. Therefore, we calculate the time to rise to the peak using the equation u = gt, and then double it. Plugging in the values, we get t = u/g, which gives us t = 352/32.2, and doubling this time gives us the total time to hit the ground.

Final answer:

The atomic nucleus, located at the center of an atom, consists of positively charged protons and neutral neutrons. Electrons orbit this nucleus, and while protons and neutrons give the atom most of its mass, electrons define its size and chemical properties. Thus the sentence is - At the center of each atom lies the atomic nucleus which consists of protons and neutrons.

Explanation:

At the center of each atom lies the atomic nucleus which consists of protons and neutrons.

The nucleus is a positively charged region at the center of the atom. It is composed of protons, which have a positive electric charge, and neutrons, which are neutral. This nucleus is very dense and contains the vast majority (99.97%) of an atom's mass. Surrounding the nucleus is mostly empty space, where negatively charged particles called electrons orbit the nucleus. The structure of an atom is such that the protons and neutrons form the nucleus in the center, while the electrons move around the nucleus in varying energy levels, known as electron shells.

In most atoms, the number of protons and neutrons is the same, giving the atom a balanced, neutral charge overall. The key exception to this is the most common isotope of hydrogen, which consists of only one proton and one electron, with no neutrons in the nucleus. Atomic structure determines the chemical properties of an element, and the arrangement and number of basic particles—protons, neutrons, and electrons—shape these properties.

circle graph

Explanation:

Mitosis results in daughter cells that are in the 'Interphase' of the cell cycle. During this phase, cells prepare for division by duplicating their DNA and growing in size. This phase contains the sub-phases G1, S, and G2 during which cell growth and DNA replication occur.

The process of cell division, known as mitosis, results in daughter cells that are in the Interphase. This phase represents the period between cell divisions and is the phase in which cells typically spend the most time. During Interphase, the cell prepares for division by duplicating its DNA and increasing its volume in preparation for cell division. The nucleus is visible and contains a nucleolus. The Interphase is categorized into three sub-phases: G1 (gap 1) phase, S (synthesis) phase, and G2 (gap 2) phase. Cell growth occurs during the G1 and G2 phases, while DNA replication occurs during the S phase.

https://brainly.com/question/31626745

#SPJ12

The false statement about the tundra is D. The tundra biome does indeed support animal life, including polar bears, caribou, and mountain goats, among others.

The correct answer to which of the following statements about the tundra is not true is D. The tundra biome does not support animal life is the false statement. Although the tundra environment is extreme, the biodiversity, while limited, does include a variety of animal life that has adapted to the harsh conditions.

Arctic tundra and alpine tundra are the two main categories of the tundra biome. The arctic tundra can go below -20° F and has limited vegetation, primarily mosses, lichens, short grasses, and some flowering plants. The alpine tundra is found at high altitudes with a longer summer growing season compared to the arctic tundra.

Animals such as polar bears, caribou, and mountain goats, as well as birds that migrate to the arctic tundra in the summer, are adapted to survive in the tundra biome. These animals have special adaptations to handle the cold temperatures and scarce resources found in the tundra.

Answer:d

Explanation:

A decomposition reaction would be the electrolysis.

2 H+ + 2e− → H2

2 H2O → O2 + 4 H+ + 4e−

Then you should add them up. In order for the equation to be balanced, the first equation has to be added twice:

2 H+ + 2e− + 2 H+ + 2e−+2 H2O → H2+ H2 + O2 + 4 H+ + 4e−

4 H+ + 4e− +2 H2O → 2H2 + O2 + 4 H+ + 4e−

Then you should cancel the substances which are both in reactives and in products, and also the electrons:

2 H2O → 2H2 + O2

And there you have the overall equation for electrolysis.

Electrolysis does not happen naturally – you have to provide electric energy for it to happen.

A synthesis reaction would be the opposite reaction, which would be called: electrosyntesis.

2H2 + O2 → 2 H2O

The box is moving at constant speed, so acceleration=0 and the equation of the forces acting on the box along the ramp becomes:

[tex]F-F_f-W_p = 0[/tex] (1)

where F=200 N is the force that pushes the box, Ff is the frictional force, and Wp is the component of the weight parallel to the ramp.

The frictional force can be written as

[tex]F_f = \mu m g cos \theta[/tex]

where [tex]\mu=0.18[/tex] is the coefficient of friction, m is the mass of the box, [tex]g=9.8 m/s^2[/tex] is the frictional force and [tex]\theta=30^{\circ}[/tex] is the angle of the ramp.

The component of the weight along the ramp is

[tex]W_p = mg sin \theta[/tex]

Substituting this into eq.(1), we have

[tex]F-\mu mg cos \theta- mg sin \theta=0[/tex]

and we can find the mass of the box:

[tex]m=\frac{F}{\mu g cos \theta + g sin \theta}=\frac{200 N}{(0.18)(9.8 m/s^2)(cos 30^{\circ})+(9.8 m/s^2)(sin 30^{\circ})}=31.1 kg[/tex]

Now we can also find the work done on the box. this is given by the gain in potential energy of the box, since there is no change in kinetic energy (the speed of the box is constant). Since the box has risen vertically by 1 m, the gain in potential energy (and the work done) is

[tex]W=\Delta U=mg \Delta h=(31.1 kg)(9.8 m/s^2)(1 m)=304.8 J[/tex]

So, the two answers are

(a) 304.8 J

(b) 31.1 kg

The physics concept of work and forces were used to answer this question. The work done was calculated to be 200 Joules and the mass was determined using the given force, angle, and coefficient of friction.

Let's solve this problem using the concepts of physics. First, we need to find how much work was done. Work done (W) = Force (F) x Distance (d) x cos (theta), where theta is the angle between the force and the direction of displacement. Here, as the force was directed up the slope and the box moved up the slope too, the angle (theta) is 0 degrees. Cos 0 = 1, so the equation reduces to W = F x d.

Given, Force (F) = 200 N and Distance (the vertical height) (d) = 1 m (Remember, the work done is equal to the force multiplied by the distance moved in the direction of the force). So, the work done = 200 N x 1 m = 200 Joules.

Next, we need to determine the mass of the box. The forces acting on the body will be gravity (mg), friction (fr) and the applied force (F). According to the information given, the box moved up the slope at a constant speed. This means the net force acting on the box should be zero. Therefore, F - fr - mg*sin(theta) = 0. Given is the coefficient of friction as 0.18, so fr = mu*N = mu*mg*cos(theta), where N = mg*cos(theta) is the normal force. Substituting fr into the net force equation, we can solve for mass (m) = F/(g*(mu*cos(theta) + sin(theta))). Substituting the known values, we get the mass of the box.

https://brainly.com/question/33344497

#SPJ11