The number of electrons flowing in a current can be found by multiplying the current by the time, and then dividing by the charge of a single electron. Use the value of 50 microamps for current, 60 seconds for time, and 1.6x10^-19 Coulombs for the charge of an electron.
Explanation:To answer this question, we first need to understand a couple key concepts such as electric current and the charge of an electron. Electric current is defined as the rate at which charge is flowing, and in this case, 50 microamperes microamps) means that there are 50 microCoulombs of charge flowing each second. The charge of an electron is approximately 1.6x10^-19 Coulombs.
Now, we can use these values to calculate how many electrons are flowing in a minute. The first step is to convert minutes to seconds, giving us 60 seconds. Multiply the current (50 microCoulombs or 50x10^-6 Coulombs per second) by the time in seconds (60 seconds). This will tell you how much charge flows in one minute. Finally, divide the total charge by the charge of a single electron (1.6x10^-19 Coulombs) to find the number of electrons. Remember to round your final answer to two significant figures as requested.
Learn more about Electric Current and Charge here:https://brainly.com/question/3478825
#SPJ3
Is your textbook the kind of idealized object (described in section on radiation laws) that absorbs all the radiation falling on it? explain. how about the black sweater worn by one of your classmates?
According to Newton’s first law of motion, what must happen to move an object at rest? It must move by its own inertia. It must gain potential energy. A force must act on it. Gravity must act on it.
a force must act on it
You replace a 40 W incandescent lightbulb with an 8 W LED bulb. If you leave your lights on 24 hours a day, how much energy are you saving each day by replacing this bulb?
By replacing a 40 W incandescent bulb with an 8 W LED bulb and leaving the lights on for 24 hours, you would be saving 768 Wh of energy per day.
Explanation:The question is asking how much energy you can save by switching from a 40 W incandescent lightbulb to an 8 W LED bulb. The energy use of a bulb is determined by its power (wattage) and the time it is turned on. To calculate the energy saved, we need to compare the energy use of the two different bulbs, when they are turned on for the same time.
Step 1: We start by calculating the daily energy consumption of the 40 W incandescent light bulb. Energy (E) in watt-hours (Wh) can be calculated using the formula E = P*t, where P is the power in watts (W) and t is the time in hours. Therefore, for the 40 W incandescent bulb used 24 hours a day: E1 = 40 W * 24 hours = 960 Wh/day.
Step 2: Then we calculate the daily energy consumption of the 8 W LED bulb. For the LED bulb: E2 = 8 W * 24 hours = 192 Wh/day.
Step 3: To find the daily amount of energy saved, we subtract the energy use of the LED bulb from the energy use of the incandescent bulb: E saved = E1 - E2 = 960 Wh/day - 192 Wh/day = 768 Wh/day. Therefore, by replacing a 40 W incandescent lightbulb with an 8 W LED bulb and leaving the lights on for 24 hours a day, you can save 768 Wh of energy each day.
Learn more about Energy Savings here:https://brainly.com/question/36600770
#SPJ2
How might a theory relate to a model
How many times longer than the length of one year is the age of the universe?
Which of these statements are true about scientific theories and laws?
Theories are untested.
Laws are untested.
Laws are often expressed as math formulas.
A law is the same as a theory.
Theories are not opinions.
Answer:
Theories are not opinions.
Explanation:
Theories are all of them tested, with the scientific method in order to be accepted or refuted, then Laws are tested and are observable by any means all around the globe, the only option that is actually correct would be that Theories are not opinions because they are scientific statements that can be tested.
Answer:
theories are not opinions
Explanation:
Riders on the power tower are launched skyward with an acceleration of 4g, after which they experience a period of free fall. what is a 60 kg rider's apparent weight during the launch?
During the launch, the person was accelerating against the gravity, therefore the equation we use in this case is:
F = m * (g + a)
where m is mass = 60 kg, g is gravity = 9.81 m/s^2, a is acceleration = 4 * g
therefore:
F = m * (g + 4 g)
F = m * 5 g
F = 60 kg * 5 * (9.81 m/s^2)
F = 2943 N
The apparent weight of a 60 kg rider during the launch of a power tower ride experiencing 4g of acceleration is 2940 N. This is calculated by adding the force due to the rider's weight and the force due to the ride's acceleration.
Explanation:To calculate the apparent weight of a rider during the launch, we need to consider the gravitational force (weight) and the additional force due to the 4g acceleration of the ride. The weight of the rider is calculated using the formula: Weight = Mass x Gravity, where mass is 60 kg and gravity is 9.8 m/s². This gives a weight of approximately 588 N (Newton).
The force due to the ride's acceleration is calculated using the formula: Force = Mass x Acceleration, where in this case acceleration is 4g or 4 x 9.8 m/s², which gives approximately 2352 N.
The apparent weight of the rider is therefore the sum of these two forces: 588 N + 2352 N = 2940 N.
So a 60 kg rider's apparent weight during the launch is 2940 N.
Learn more about Apparent Weight here:https://brainly.com/question/14323035
#SPJ11
The maximum theoretical flow rate (slug/s) through a supersonic nozzle is
The maximum theoretical flow rate through a supersonic nozzle is determined by the nozzle's design and the properties of the fluid flowing through it.
What is maximum theoretical flow rate?In supersonic flow, the flow properties change drastically, and the flow behavior is described by compressible fluid dynamics equations, including the Mach number.
The maximum Mach number that can be achieved in a supersonic flow is 1, also known as Mach 1.
Any Mach number greater than 1 corresponds to supersonic flow. The design of the nozzle, specifically its converging and diverging sections, determines how well the flow can be accelerated to supersonic speeds and how efficiently it can expand to match the downstream pressure.
Learn more about theoretical flow rate here: https://brainly.com/question/29437529
#SPJ2
What is the question that Maria and Elena want to answer by performing an experiment
Answer:
If there is no text attached. Generally, the answer is Hypothesis.Explanation:
A hypothesis or system of hypothesis is the core of a research. It's the possible solution to a problem that researchers established when looking for theories or events to prove it.
Consider a box sitting in the back of a pickup. The pickup accelerates to the right, and because the bed of the pickup is sticky, the box does not slide around the truck when this happens.What direction is the force acting on the box due to the truck?
Considering a box sitting in the back of a pickup. The pickup accelerates to the right, and because the bed of the pickup is sticky, the box does not slide around the truck when this happens. But the force acting on the box is left.
What is Force ?Force is responsible for the motion of an object. it produces acceleration in the body. According to newton's second law force is mass times acceleration i.e. F =ma. Its SI unit is N which is equivalent to kg.m/s².
There are two types of forces, balanced force and unbalanced force.
When Net force acting on a body is zero then we call it as balanced force. .
Unbalanced forces are those when resultant of all the forces is not equal to zero is called as unbalanced force. unbalanced force is responsible for the motion of the body.
Whatever we are talking about force in this problem is called as pseudo force, it same as we feel in the bus when we are standing in the bus suddenly driver brakes we go ahead in the bus or we feel forward force.
Pseudo force is not actual force but it can felt, centrifugal force is a type of pseudo force.
In this problem, as pickup accelerates, according to newtons first law box in the pickup tend to have its original velocity(0 if pickup is at rest or v when it is in motion). because of this when pickup accelerates right, box feel pseudo force in the opposite direction(Left).
Hence left is correct.
To know more pseudo force :
https://brainly.com/question/30076572
#SPJ2.
A projectile is fired in such a way that its horizontal range is equal to 14.5 times its maximum height. what is the angle of projection?
The maximum height is:
hmax = v0² sin² α / 2 g
The horizontal range is: x = v0² sin 2 α / g
So we are given that:
x = 14.5 hmax
v0² sin 2 α / g
= 14.5 v0² sin² α / 2 g
7.25 sin² α = 2 sin α cos α
7.25 sin α = 2 cos α
7.25 tan α = 2
tan α = 0.27586
α = tan^(-1) 0.27586
α = 15.42°
The angle of projection is 15.42°
A good-quality measuring tape can be off by 0.50 cm over a distance of 20 m. what is its percent uncertainty?
The percent uncertainty in this question refers to how much measured values could deviate from a standard or expected value. For this example, considering a good-quality measuring tape that can be off by 0.50cm over a distance of 20m, the percent uncertainty is calculated as 0.0025%
Explanation:The concept this question is referring to is percent uncertainty, which is a quantitative measure of how much measured values deviate from a standard or expected value. It's widely used in physics and engineering. In a practical context, when you're using a measuring tape, it's unlikely you'll get a perfect measurement every time. This could be due to factors like the smallest division on the tape or the person using it having bad eyesight. In this particular example, measuring tape error was 0.50 cm over a distance of 20 m (or 2000 cm).
The percent uncertainty is calculated by dividing the uncertainty (the amount the measurement could be off by) by the measured value, and then multiplying by 100% to express it as a percentage.
So, percent uncertainty = (uncertainty/measured value) * 100%.
For this scenario, percent uncertainty = (0.50 cm / 20000 cm) * 100% which equals to 0.0025%.
So, in this example, the percent uncertainty is 0.0025%.
Learn more about Percent Uncertainty here:https://brainly.com/question/30298257
#SPJ12
The percent uncertainty of the measuring tape is 0.025%.
To find the percent uncertainty of a measurement, you use the following formula:
[tex]\text{Percent Uncertainty} = \left( \frac{\text{Absolute Uncertainty}}{\text{Measured Value}} \right) \times 100 \%[/tex]
Given:
Absolute Uncertainty = 0.50 cmMeasured Value = 20 metersFirst, convert the Measured Value to centimeters because the absolute uncertainty is given in centimeters.
[tex]20 \text{ m} = 2000 \text{ cm}[/tex]
Now, plug the values into the formula:
[tex]\text{Percent Uncertainty} = \left( \frac{0.50 \text{ cm}}{2000 \text{ cm}} \right) \times 100 \%[/tex]
Calculate the result:
[tex]\text{Percent Uncertainty} = \left( \frac{0.50}{2000} \right) \times 100 \% = 0.025 \%[/tex]
A particular baseball pitcher throws a baseball at a speed of 39.1 m/s (about 87.5 mi/hr) toward home plate. We use g = 9.8 m/s2 and ignore air friction.
(a) Assuming the pitcher releases the ball 16.6 m from home plate and throws it so the ball is initially moving horizontally, how long does it take the ball to reach home plate?
A completely submerged object always displaces its own
Archimedes' principle states that a completely submerged object always displaces its own volume of water, creating an upward buoyant force.
Explanation:In physics, an object that is completely submerged underwater will always displace its own volume of water.
This is known as Archimedes' principle, which states that the buoyant force acting on an object is equal to the weight of the fluid it displaces.
For example, if a 1 liter object is submerged in water, it will displace 1 liter of water. This displacement results in an upward force, called the buoyant force, that opposes the weight of the object.
Learn more about Buoyancy here:https://brainly.com/question/36883204
#SPJ6
What must her minimum speed be just as she leaves the top of the cliff so that she will miss the ledge at the bottom, which is w = 1.75 m wide and h = 8.00 m below the top of the cliff?
Final answer:
To avoid hitting the ledge when jumping from a cliff, calculate the time of flight using the height of the cliff and gravity, then use that time to find the minimum horizontal velocity needed to clear the ledge width.
Explanation:
Minimum Speed to Miss the Ledge
To find the minimum speed required for a person to miss the ledge when jumping from a cliff, one must analyze the motion in two dimensions: vertical and horizontal. The vertical distance (h) and the width of the ledge (w) are crucial to determine the time in the air and the minimum horizontal velocity needed.
The vertical motion is independent of the horizontal motion and can be analyzed using the formula for the time of flight under gravity which is t = [tex]\sqrt(2h/g)[/tex], where g is the acceleration due to gravity. Once the time of flight is calculated, we use this time to find the minimum horizontal velocity (vmin) necessary to travel the width of the ledge w by the formula vmin = w/t. This is the minimum speed the person needs just as they leave the edge of the cliff.
For a ledge 1.75m wide and cliff 8.00m high, first, calculate the time of flight with t = [tex]\sqrt((2*8.00m)/9.81m/s2)[/tex]. Then, use this time to calculate the horizontal velocity with v min = 1.75m / t.
When people use plastic combs on their hair, the combs become negatively charged. Which statements about this situation are true?
The comb loses electrons.
The comb gains electrons.
The hair loses electrons.
The hair gains protons.
The hair loses protons.
those above are the choices
Final answer:
When a plastic comb is run through hair, the comb gains electrons and becomes negatively charged due to the transfer of electrons, which is a result of static electricity caused by friction. The hair loses electrons but does not gain protons or lose protons, as protons do not move freely like electrons.
Explanation:
When people use plastic combs on their hair, the combs can become negatively charged due to static electricity. This happens due to the transfer of electrons from one object to another. In this case, the true statements about the situation are:
The comb gains electrons.
The hair loses electrons.
Protons are not exchanged in static electricity because they are located within the atomic nucleus and do not move freely. Therefore, it is the gain or loss of electrons that causes the static charge. The friction between the comb and the hair can cause electrons to be transferred from the hair to the comb, which is why the comb becomes negatively charged.
How many kilograms are there in a 2.00 L bottle of drinking water?
A truck covers 40.0 m in 8.50 s while smoothly slowing down to a final speed of 2.80 m/s. (a) find its original speed. (b) find its acceleration.
Answer:
For a: The original speed of the truck is 4.76 m/s
For b: The acceleration of the truck is [tex]-0.23m/s^2[/tex]
Explanation:
For a:Speed is defined as the rate at which an object moves with respect to time.
To calculate the time taken for the given speed, we use the equation:
[tex]s=\frac{d}{t}[/tex]
where,
s = speed of the truck
d = distance traveled = 40.0 m
t = time taken by truck = 8.50 s
Putting values in above equation, we get:
[tex]s=\frac{40.0m}{8.50s}=4.76m/s[/tex]
Hence, the original speed of the truck is 4.76 m/s
For 2:Acceleration is defined as the rate of change of velocity with respect to time.
Mathematically,
[tex]a=\frac{v-u}{t}[/tex]
where,
v = final velocity of the truck = 2.80 m/s
u = initial velocity of the truck = 4.76 m/s
t = time taken = 8.50 s
Putting values in above equation, we get:
[tex]a=\frac{2.80-4.76}{8.50}=-0.23m/s^2[/tex]
Negative sign represents slowing down or deceleration.
Hence, the acceleration of the truck is [tex]-0.23m/s^2[/tex]
Objects A and B are brought close to each other. Object A will soon become positively charged. Identify the charge that must transfer for this situation to occur.
The following situation occurs:
The two objects are brought close to each other (but they do not touch). Object B must be negatively charged: in this case, for induction, the positive charges on object A migrate towards the side of the object closer to object B, while the negative charges migrate to the other side. Then, object A must be connected to the ground, so that the negative charges migrate to the ground: therefore, an excess of positive charges remain on object A, which is now positively charged.
Answer:
a positive charge will transfer from object b
Explanation:
a positive charge will transfer from object b to object a making a positively charged
Have a good day = )
A comet near the sun whose orbit is _______________ would never be near the sun again
When the temperature is cold, Tim's tires look under-inflated. This is because the air molecules in the tire ________ causing their kinetic energy to _________ and volume to _______. A) slow down, decrease, contract B) multiply, increase, fluctuates C) stay the same, increase, expand D) speed up, decrease, stay the same
A car accelerates from 13-m/s to 24.1-m/s in 5.4-s. what was its acceleration in m/s2?
Fiora starts riding her bike at 20 mi/h. after a while, she slows down to 12 mi/h, and maintains that speed for the rest of the trip. the whole trip of 70 mi takes her 4.5 h. for what distance did she travel at 20 mi/h?
Answer : Distance, d = 40 mi.
Explanation :
It is given that,
Fiora starts riding her bike at 20 mi/h. after a while, she slows down to 12 mi/h and maintains that speed for the rest of the trip. the whole trip of 70 mi takes her 4.5 h.
Let for t hours she traveled at 20 mi/h. So, for ( 4.5 - t) h she has traveled with a speed of 12 mi/h.
We know that,
distance covered = speed × time
20 mi/h × t +12 mi/h (4.5 h - t) = 70 mi
t = 2 h
So, the distance covered in 2 h is, d = 20 mi/h × 2 h = 40 mi.
Hence, this is the required solution.
What part of earth systems interact to form a storm like this hurricane near Florida
what universal standard is the basis of the atomic mass unit
Final answer:
The atomic mass unit is based on the carbon-12 atom, where 1 atomic mass unit is equal to one-twelfth of the mass of a carbon-12 atom.
Explanation:
The universal standard that serves as the basis for the atomic mass unit is the mass of a carbon-12 atom. An atomic mass unit (usually abbreviated as amu or u) is defined as one-twelfth of the mass of a single carbon-12 atom. This provides a convenient scale for measuring atomic masses, as it results in both protons and neutrons having masses very close to 1 u, given their similar mass. Electrons have a much smaller mass and thus make a negligible contribution to the atomic mass. To express this in more familiar units, 1 u is equivalent to 1.6605×10-27 kilograms.
What is the chemical formula for mercury(I) nitrate? Hgmc021-1.jpg(NOmc021-2.jpg) Hg(NOmc021-3.jpg)mc021-4.jpg Hgmc021-5.jpg(NOmc021-6.jpg)mc021-7.jpg Hgmc021-8.jpg(NOmc021-9.jpg)mc021-10.jpg
Final answer:
The chemical formula for mercury(I) nitrate is Hg2(NO3)2, featuring a Hg₂²+ dimeric cation.
Explanation:
The chemical formula for mercury(I) nitrate is Hg2(NO3)2. This compound is created when a large excess of mercury reacts with dilute nitric acid. Mercury(I) compounds are unique because they contain a Hg₂²+ ion, which is a dimeric cation where two mercury atoms are bonded together, each with a +1 oxidation state, giving the overall molecule a +2 charge. It's important to note that the compound must be handled with care due to the toxicity of mercury compounds.
When the molecules in a body move with increased speed, it's possible that the body will change from a
A. liquid to a solid.
B. gas to a liquid.
C. liquid to a gas.
D. gas to a solid.
_____ bias describes when your likes and dislikes affect how you think about something.
Identifying Variables in a Hypothesis
"If the pressure of a gas is increased, then the volume will decrease because the particles of the gas will be forced closer together."
The independent variable is ________.
The dependent variable is ________.
Three deer, a, b, and c, are grazing in a field. deer b is located 64.9 m from deer a at an angle of 53.4 ° north of west. deer c is located 77.9 ° north of east relative to deer
a. the distance between deer b and c is 96.8 m. what is the distance between deer a and c
Final answer:
Explanation of calculating the distance between two deer in a field using trigonometry and the Pythagorean theorem.
Explanation:
Given information:
Deer b is 64.9 m from deer a at an angle of 53.4° north of west. Deer c is 77.9 m north of east relative to deer a. The distance between deer b and c is 96.8 m.
To find: Distance between deer a and c.
Calculation:
Using trigonometry, we can find the distances and then apply the Pythagorean theorem to calculate the distance between deer a and c.
Distance between deer a and c is approximately 59.2 meters.