Human activities can accelerate the process of

A) physical weathering
B) chemical weathering
C) both

Drawback of Fossil fuel :-

1)  Big Role in Global Warming :-  Fossil fuel create so much Carbon that's why it is more responsible in Global warming .

2) Non Renewable :-  fossil fuel take million of years to create .

Causes Air pollution :- burning fossil fuel emits number of pollution that are harmful for the environment.

Answer:

If you cannot get a chair to move across the floor, it is because ___ friction opposes your push.

Static friction.

Explanation:

Fluid friction is the resistance an object encounters in the water surface so in our case it's incorrect because we can't see any water in our scenario.

Rolling friction is the friction a wheel or sphere finds as resistance in the surface. In our scenario, we are talking about a wheelchair or a chair with small wheels like the office ones. So it is incorrect.

Sliding friction is the friction that an object encounters when it is pushed to move in a surface that slides against the direction of the object. Or that opposes gravitational resistance against the object direction because it is in a certain degree of elevation. Meaning that the surface is perpendicularly pointing the sky.

Static friction is the type of resistance an object finds when it is moved after being static. And this is our answer because the chair was static without wheels.

To estimate the value of a large coffee can of pennies, draw out a sample. Count it and weigh it, obtaining an average weight per penny. Weigh the all the coins in the can, subtracting the weight of the empty can. By dividing the weight of all coins by the weight of one penny, you can estimate the total amount.

To estimate the amount of money a large coffee can full of pennies contains without counting all the coins, you can use a method known as sampling. Start by selecting a small, manageable number of pennies from the can. For instance, you could take out 20. Count the value of the pennies you've selected, using the knowledge that each penny, in U.S currency, is worth 1 cent. This will give you an average value. Then weigh the pennies. This will give you the average weight of 1 cent. Next, weigh the entire can and subtract the weight of the can itself. This gives you the weight of all the pennies. Divide the weight of all coins by the average weight of 1 cent. You now have an estimate of the total amount of money in the can.

https://brainly.com/question/31577848

#SPJ2

Photosynthesis converts light energy into chemical energy through two stages: light-dependent reactions that produce ATP and NADPH, and light-independent reactions using these elements to convert carbon dioxide and water into glucose.

Photosynthesis is a biological process that converts light energy, primarily from the sun, into chemical energy in plants. Photosynthesis comprises two stages: the light-dependent reactions and the light-independent reactions.

During the light-dependent reactions, energy from sunlight is absorbed by pigment molecules like chlorophyll, triggering the release of electrons. This energy is used to create adenosine triphosphate (ATP) and NADPH, forms of chemical energy.

In the next phase, the light-independent reactions (also known as the Calvin cycle), the ATP and NADPH produced in the light-dependent reactions are used to convert carbon dioxide and water into glucose, an energy-storing molecule, and oxygen. Therefore, it's during these light-independent reactions that chemical energy is formally established from light energy in photosynthesis.

https://brainly.com/question/29764662

#SPJ11

Many toxic manufacturing compounds are securely disposed of through the means of high-temperature combustion. However mercury is not "annihilated" when coal comprising mercury impurities is scorched. This is happening because when the mercury in the carbon (coal Hg) is burned it changes into a gas which is emitted into the atmosphere.

The functional group of the aspirin in which causes this compound to cause a person’s stomach to be irritated is most likely because of the acetyl salicylic acid in which its acid portion of this drug causes the person’s stomach to feel stomach irritation.

Answer:

The acid (-COOH) functional group of aspirin causes it to irritate the stomach

Explanation:

Aspirin is acetylsalicylic acid with a molecular formula C₉H₈O₈.

It is a cyclic compound composed of a benzene ring along with 2 functional groups: the carboxylic acid (-COOH) and acetyl group (-OCOCH3)

The most common side effect of consuming aspirin is an upset stomach. This is due to the acid functional group which can irritate the stomach lining.

The question does not provide specific data for different sites or collection days to determine where swimming would be unsafe. However, if E. coli concentration exceeds 200 colonies per 100 mL water, it's unsafe. Regular sampling and testing is crucial to ensure water safety for recreational activities.

The information provided does not include specific data on the concentration of E. coli colonies at different sites or at different collection days, which makes it impossible to identify the days or sites where it would have been unsafe to swim, tube, or raft. However, the concept of unsafe concentrations of E. coli in water can be discussed. The U.S. Environmental Protection Agency (EPA) sets enforceable concentration values for primary contaminants, and these are known as Maximum Contaminant Levels (MCLs). For E. coli, a concentration exceeding 200 colonies per 100 mL is deemed unsafe.

Water sampling and testing for the presence of E. coli is a common microbial testing procedure. In a simplified process, the sample is diluted in lactose broth tubes at different volumes and then incubated. If E. coli is present, it ferments the lactose, causing a color change in the broth. This method helps to estimate the probable number of bacteria per 100 mL of water.

Maintaining good personal hygiene and avoiding untreated water in developing nations is crucial to preventing E. coli infections. Ensuring the safety of recreational water activities involves continuous monitoring and testing of water samples to prevent potential health hazards related to excessive E. coli concentration in the water. In the absence of monitoring and testing, any water body could potentially be unsafe for swimming, tubing, and rafting.

https://brainly.com/question/29887353

#SPJ2

Answer:

production of a gas

Explanation:

What makes the cake grow is the action caused by yeast. When added in the dough the yeast undergoes a chemical transformation releasing carbon dioxide, for example from the reaction between sodium bicarbonate and monoacid phosphate. It is the carbon dioxide that makes the cake grow, making the dough light and soft. This reaction is favored by heating, so the use of frozen ingredients in the preparation of the dough can harm the end result.

The molar masses of each element are:

Ba =137.3 g/mol 
N = 14 g/mol 
O = 16 g/mol

Calculating the total mass by multiplying with number of moles:

Ba = 137.3 g/mol * 1 mol = 137.3 g

N = 14 g/mol * 2 mol = 28 g

O = 16 g/mol * 6 mol = 96 g

Total 261.3g 

Ba: 137.3/261.3 = 52.55% 
N: 96/261.3 = 36.73% 
O: 24/261.3 = 10.72% 

Answer:

52.55% Ba, 10.72% N, 36.73% O

The correct percentage composition for barium nitrate (Ba(NO3)2) is 56.54% Ba, 12.54% N, and 30.92% O, as calculated based on the molar masses of each element in the compound. This matches option e.

To calculate the percentage composition of each element in barium nitrate (Ba(NO3)2), we need to find the molar masses of each element and then use them to determine the percentage of each element in the compound.

1. **Calculate the molar mass of Ba(NO3)2:**

  \[ \text{Molar mass of Ba(NO3)2} = \text{Molar mass of Ba} + 2 \times \text{Molar mass of N} + 6 \times \text{Molar mass of O} \]

2. **Calculate the percentage composition of each element:**

  \[ \text{Percentage of Ba} = \left( \frac{\text{Molar mass of Ba}}{\text{Molar mass of Ba(NO3)2}} \right) \times 100 \]

  \[ \text{Percentage of N} = \left( \frac{2 \times \text{Molar mass of N}}{\text{Molar mass of Ba(NO3)2}} \right) \times 100 \]

  \[ \text{Percentage of O} = \left( \frac{6 \times \text{Molar mass of O}}{\text{Molar mass of Ba(NO3)2}} \right) \times 100 \]

Now, compare the calculated percentages with the options:

a. 52.55% Ba, 10.72% N, 36.73% O (Not correct)

b. 11.11% Ba, 22.22% N, 66.67% O (Not correct)

c. 10.72% Ba, 52.55% N, 36.73% O (Not correct)

d. 50.00% Ba, 10.00% N, 40.00% O (Not correct)

e. 56.54% Ba, 12.54% N, 30.92% O (Correct)

So, the correct answer is option e.

Learn more about percentage composition here:

https://brainly.com/question/26632540

#SPJ6

The probable question may be:

Calculate the percentage composition of each element in barium nitrate, Ba(NO3)2. choose the correct percentages for ba, n, and o.

a. 52.55% Ba, 10.72% N, 36.73% O

b. 11.11% Ba, 22.22% N, 66.67% O

c. 10.72% Ba, 52.55% N, 36.73% O

d. 50.00% Ba, 10.00% N, 40.00% O

e. 56.54% Ba, 12.54% N, 30.92% O

The answer would be neutron. This is 100% correct, because I got it right on my lesson.

An ion is an atom or molecule with a net electrical charge due to the loss or gain of electrons. Out of the options provided (Ca, Na^+, Mg, ^4He), only Na^+ is an ion, representing a sodium atom which has lost one electron.

An ion is an atom or molecule that has gained or lost one or more electrons, giving it a net electrical charge. From the provided options, only Na^+ is an ion. It represents a sodium atom that has lost one electron, resulting in a positive charge.

https://brainly.com/question/34716291

#SPJ3

Answer: Option (B) is the correct answer.

Explanation:

When we heat food in a microwave then the electrical energy of microwave produces microwaves which are also part of electromagnetic spectrum.

These microwaves are absorbed by food and as a result microwaves change into heat energy. Therefore, food becomes hot.

Thus, we can conclude that to cook food, a microwave oven converts electrical energy into heat energy.

Answer:

The answer is A

Explanation:

Using Boyle's Law, which states that the pressure and volume of a gas at constant temperature are inversely proportional, we can calculate that a tank of about 1920 liters would be needed to contain the same amount of helium at atmospheric pressure.

The application of Boyle's law, which describes the inverse relationship between the pressure and volume of a gas at a constant temperature, can assist in determining the size of the tank needed to contain the same amount of helium at atmospheric pressure. This relationship is expressed by the formula P₁V₁ = P₂V₂, where P₁ and V₁ are the initial pressure and volume, and P₂ and V₂ are the final pressure and volume.

Here, the initial pressure (P₁) is 160 atm, the initial volume (V₁) is 12 L, and we want to find the final volume (V₂) at atmospheric pressure (P₂) of 1 atm. By substituting these values into the formula, we have 160 atm * 12 L = 1 atm * V₂. The calculation leads to V₂ = 1920 L.

So, a tank of approximately 1920 liters would be needed to contain the same amount of helium at atmospheric pressure according to Boyle's Law.

https://brainly.com/question/21184611

#SPJ12

Final answer:

Halogens in the halogen family gain one electron to become halide ions.

Explanation:

The elements of the halogen family, which includes fluorine, chlorine, bromine, iodine, and astatine, gain electrons to become halide ions. Halogens have a p5 electron configuration, meaning they have one vacancy in their outermost subshell. By accepting an extra electron, the halogens achieve a stable noble gas electron configuration and become negatively charged ions. For example, chlorine (Cl) gains one electron to become the chloride ion (Cl-).

Hello!

The scientific study of the behavior of matter near 0K is called cryogenics

The word "cryogenics" comes from the greek kyros (cold) and geneia (generation). It describes the techniques used to reach very low temperatures to study the behavior of matter.

The ways to achieve these low temperatures are various, but here are the most common:

Have a nice day!

The concentration (in molarity) of the KOH solution needed to neutralize the given quantity of KHP is calculated to be 0.1104 M.

To determine the concentration of the KOH solution, we first need to know the stoichiometry of the neutralization reaction taking place. Potassium hydrogen phthalate (KHP) is a monoprotic acid, meaning it donates one proton (H+) per molecule to be neutralized by one molecule of KOH (which provides one OH-).

Firstly, convert the mass of KHP into moles using its molar mass (approximately 204.22 g/mol):
0.4218 g KHP * (1 mol KHP / 204.22 g KHP) = 0.002064 mol KHP.

Since the stoichiometry of the reaction is 1:1, the moles of KOH used is 0.002064 moles. The volume of the KOH solution used is 18.68 mL or 0.01868 L. Hence, the concentration of the KOH solution in molarity (M), which is defined as moles/Liter, can be calculated as follows:
0.002064 mol KOH / 0.01868 L = 0.1104 M.

Therefore, the molarity of the KOH solution is 0.1104 M.

https://brainly.com/question/15948514

#SPJ12

To find the concentration (in molarity) of the KOH solution, you first calculate the number of moles of KHP, then use the balanced equation to determine the mole ratio between KHP and KOH, and finally calculate the concentration of the KOH solution.

To find the concentration (in molarity) of the KOH solution, we can use the equation:

KHP (aq) + KOH (aq) → K2HPO4 (aq) + H2O (l)

First, we need to calculate the number of moles of KHP:

Moles of KHP = mass / molar mass = 0.4218 g / 204.22 g/mol = 0.002063 mol

Next, we can use the balanced equation to determine the mole ratio between KHP and KOH. From the equation, we can see that 1 mole of KHP reacts with 1 mole of KOH:

Moles of KOH = moles of KHP = 0.002063 mol

Finally, we can calculate the concentration of the KOH solution:

Concentration (in Molarity) = moles / volume

Molarity = 0.002063 mol / 0.01868 L = 0.1105 M

https://brainly.com/question/28311107

#SPJ3

Answer:

Energy can be exchanged between the system and surroundings, but matter cannot.

Explanation:

In thermodynamics a closed does not allow the exchange of matter but allows the exchange of energy. Thus option C is correct and option B is incorrect.  

Open system allows both the transfer of mass and energy. Thus option A is incorrect.  

Isolated system does not allow the transfer of mass nor energy. Option D is incorrect.

The Lewis atomic model proposed that electrons are arranged around the nucleus in specific energy levels, which was further detailed by Niels Bohr to include allowed circular orbits. Bohr's model introduced the concept that these orbits, or energy levels, are quantized and designated with the quantum number 'n'. Lewis diagrams also show valence electrons around an atom's symbol, helping to visualize bonding.

The Lewis atomic model suggests that electrons are arranged around the nucleus in specific energy levels, represented as rings or shells. This model of atomic structure was expanded upon by Niels Bohr in 1913. Bohr's model for the hydrogen atom incorporated quantum concepts and classical mechanics to propose that electrons move in fixed orbits, or quantized energy levels, around the nucleus. Each orbit represents a different energy level and is denoted by the principal quantum number 'n'. Bohr's model of the atom was a significant step forward from previous models, like the cubic model and the Saturnian model, and it introduced the idea that electrons could only exist in certain allowed energy states.

Notably, in Bohr's model, an electron in a hydrogen atom moves around the nucleus in circular orbits centered at the nucleus. The orbits are allowed to have only certain radii, which are in specific energy levels or shells designated by a number and the symbol 'n'. This concept also applies to more complex atoms, where electrons occupy regions of space, known as orbitals, around the nucleus based on their energy levels. This model was pivotal in explaining phenomena such as the discrete emission spectra of hydrogen.

Lewis diagrams, also known as Lewis electron dot diagrams, are a representation that shows the valence electrons as dots around the chemical symbol of an atom, thus giving us a visual representation of the valence electron arrangement in atoms and aiding in the understanding of chemical bonding and molecule formation.

Studies involving humans or animals are conducted under strict policies and procedures, and this solution addresses the ethical concerns as the animals and humans should not be harmed in such processes.

In general, animals such as mice, pigs, and other animals are used in scientific experiments for clinical tests such as vaccine tests, drug tests, and so on for safety reasons, and as a result, the animals' health suffers and they may die. So there are always ethical concerns in scientific research when there is the involvement of animals and humans, and that should be replaced with safe and secure research.

Hence, studies involving humans or animals are conducted under strict policies and procedures, and this solution addresses the ethical concerns as the animals and humans should not be harmed in such processes.

Learn more about the ethical concerns in the scientific experiment here.

https://brainly.com/question/17580909

#SPJ5

The question is incomplete, the complete question is here

Studies involving humans or animals are conducted under strict policies and procedures. This solution addresses which limitation?

A) Lack of proper equipment

B) Size of the system

C) Limited amount of time

D) Ethical Concerns

Final answer:

A silver atom becomes a silver ion by losing an electron and getting oxidized. The process is part of a redox reaction, which also involves the reduction of silver ions back to metallic silver when gaining electrons, as seen in silver plating.

Explanation:

A silver atom is converted to a silver ion when the atom loses an electron and assumes a positive charge. In contrast, the reduction of silver ions to make silver metal involves them gaining an electron to revert to the neutral atomic state. This process is part of an oxidation-reduction (redox) reaction, where electrons are transferred between substances. During this transformation, oxidation occurs because the silver atom's oxidation state changes from 0 to 1+, indicating a loss of electrons.

For instance, when a clean piece of copper metal is placed in a solution of silver nitrate, silver ions start to gain electrons from the copper, reducing them to solid silver metal, and at the same time, copper is oxidized. This visual change can be observed by the development of a blue color in the solution, indicating the presence of copper ions, and the formation of solid silver on the copper strip.

In the context of silver plating, silver ions in a solution are reduced at the cathode to form a thin layer of silver metal on objects such as spoons. The half-reaction at the cathode is written as Ag+ (aq) + e→ Ag(s), indicating the balance of both atoms and charges as solid silver is formed and the silver ions are reduced.