How do nonmetals conduct electricity? well . by giving up electrons . poorly . better than metals.

Answer : The correct options are, stir the water, crush the salt and heat the water.

Explanation :

As we know that the increase or decrease of the rate depends on many factors which are, temperature, surface area, etc.

Stir the water : By this action the rate increases because when we are stirring the water, the some amount of energy is released that means the temperature of the solution increases. Thus the salt dissolves easily in water by stirring.

Crush the salt : By this action the rate increases because the surface area of solute (salt) increased by the crushing. So, the salt will be dissolved easily in water.

Heat the water : By this action the rate increases because when we are heating the water the temperature of the water increases. As the temperature increases, some empty voids created in the water molecule. Thus, the more salt will be dissolved in water.

But by the use of less water and cool the salt action, the rate decreases.

Hence, the correct options are, stir the water, crush the salt and heat the water.

Answer: The answer is B: Crush The Salt.

it is making a new form so the density would be the same because water becoming into ice a solid are the same thing.

when a solid is cooled, its molecules slow down n vibrate less. usually its volume will decrease. as the mass remains constant and density = mass/volume, density will decrease.

The correct answer is the atomic radius increase because of the higher number of occupied energy levels.  

Atomic radius increases when going down a group. The valence electrons hold the higher levels because of the enhancing quantum number (n). As a consequence, the valence electrons get further away from the nucleus with the increase in n. The electron shielding inhibits these outer electrons from getting fascinated towards the nucleus. Therefore, they are held, and the resulting atomic radius is greater.  

Answer:

they increase, because of the higher number of occupied energy levels

Explanation:

cohesion is the "stickiness" that water molecules have for each other and for other substances.

Hope this helped :)

Answer:

The correct answer is

D. the temperature

Explanation:

According to the forces of attraction,the average kinetic energy of the particles in a gas is determined by the temperature.

Forces of attraction  is a force by which atoms in a molecule  combine. it is basically an attractive force in nature.  It can act between an ion  and an atom as well.It varies for different  states  of matter that is solids, liquids and gases.

The forces of attraction are maximum in solids as  the molecules present in solid are tightly held while it is minimum in gases  as the molecules are far apart . The forces of attraction in liquids is intermediate of solids and gases.

As the forces of attraction are least in gases they have maximum average kinetic energy which is further increased by an increase in temperature.

Learn more about forces of attraction,here:

https://brainly.com/question/32820512

#SPJ4

The subshell thats likely to be filled is s subshell  

after the rest of the subshells at a particular energy level.

1. p

2. f  

3.d

4.s

Answer:

2.f

Explanation:

At a particular energy level, say energy level 4. So lets compare subshells within the particular  shell or energy level. Comparing 4s, 4p, 4d and 4f. Subshell s has the lowest energy and subshell f has the highest energy. So 4s orbital will be filled first, followed by 4p, 4d and 4f. This is in accrdance to Aufbau principle.

Therefore the f subshell is likely to be filled after the rest of the sub shells at a particular energy level are filled.

your answer should be

A. the number of organisms of a species per unit area

Brainliest?

Answer: Option (A) is the correct answer.

Explanation:

Usually, density is defined as mass present in per unit volume.

Mathematically,         Density = [tex]\frac{mass}{volume}[/tex]

Since density is directly proportional to mass so, more is the mass of an object more will be its density.

Similarly, population in terms of density is the number of organisms of a species per unit area.

Thus, we can conclude that out of the given options the number of organisms of a species per unit area MOST closely defines population density.

 The  electronegativity   of fluorine  compare  to the  electronegativity   of oxygen and chlorine as below

Fluorine  has the highest electronegativity   than oxygen  and  chlorine.

  Explanation

 Generally  the  electronegativity    increase   across the period ( from the left to the right)  and  decreases down  the group.

Answer:

Fluorine is a smaller atom so when it forms a covalent bond, the shared electrons are closer to the nucleus and there is less shielding, electronegativity of oxygen is greater.

Answer: This is a mixture.

Explanation:

A solution consists of solute (which can be solid, liquid or gas) mixed in a given amount of solvent.

A mixture is a combination of two or more substances which are not present in a definite proportion.

We are given two solids: copper and silver.

As, they are not present in definite proportion hence, they are considered as mixtures.

Molecules or atoms. One of those. although atoms make up everything so i would go with atoms.

Answer:

Mixtures

Explanation:

The air,soil,and most foods and beverages are example of Mixtures. Mixtures are a combination of two or more substances into a single substance. Air is a mixture of gases, soil is mixture of elements, most foods are also mixtures.

The mixture can be both homogeneous or heterogeneous. A homogeneous mixture has a uniform appearance throughout and uniform composition as well. Whereas, a heterogeneous mixture neither has uniform composition nor it has uniform appearance.

the balanced equation is:

Al2O3 + 6HCl -> 2AlCl3+3H2O

A. mechanical energy to thermal energy

The original volume of the balloon is approximately 29 L.

To calculate the original volume of the helium-filled balloon, we can use the combined gas law equation: PV/T = PV/T. Let's assume the unknown original volume as V1. Conversion of the temperatures from Celsius to Kelvin gives us T1 = 27 + 273 = 300K and T2 = -14 + 273 = 259K. Plugging the given values into the equation, we have (201 kPa)(59.3 m3)/300K = (2.5 kPa)(V1)/259K. Solving for V1, we find the original volume of the balloon to be approximately 0.029 m3 or 29 L.

https://brainly.com/question/14832339

#SPJ12

To solve for the original volume of the balloon, we can use the Ideal Gas Law. After converting the temperatures to Kelvin, we can rearrange the formula of the Ideal Gas Law to solve for the original volume. Doing this, we find that the original volume is approximately 1.73 cubic meters.

To solve this physics question, we need to use the Ideal Gas Law that states PV=nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature. In this case, we assume that the number of moles doesn’t change and the R is a constant. Therefore, we can simplify the law to the formula P1V1/T1=P2V2/T2 to find the original volume of the balloon.

Firstly, you need to convert the temperatures from Celsius to Kelvin by adding 273.15. That gives us 300.15K for 27°C and 259.15K for -14°C. The initial pressure (P1) is 201 kPa, the final pressure (P2) is 2.5 kPa, and the final volume (V2) is 59.3 m3.

So applying the equation P1V1/T1 = P2V2/T2, we can solve for V1, the original volume:
V1 = (P2*V2*T1)/(P1*T2) = (2.5 kPa*59.3 m3*300.15K)/(201kPa*259.15K)

This gives us the original volume as V1 = 1.73 m3.

https://brainly.com/question/30458409

#SPJ12

Answer:

The answer will be (B) Kinetic energy to potential energy

Explanation:

When something is in movement, it has kinetic energy. When that object beings to slow down it gains more potential energy than kinetic.

The potential needed to do work is called energy. It can exist in several forms like kinetic, potential, thermal, nuclear etc.

The correct answer is:

option B. Kinetic to potential energy.

This can be explained by the following:

Therefore, when a roller coaster slowly climbs a steep hill then the kinetic energy gets transformed into potential energy.

To learn more about kinetic and potential energy refer to the link:

https://brainly.com/question/21288807

Hi,

To solve the question, first of all we will find out the no. of moles of H2SO4 in  19 g of sulfuric acid.

As we know:

              No . of moles = Mass/ Molar mass

              No. of moles= 19 g/98.08 g

               No. of moles= 0.1937

Now we know the no of moles of H2SO4 that will react with 2LiOH. We also know the  molar equivalence of H2SO4 , and 2LiOH that will react.

So, the  water that will be produced will be 2H2O and 1 Li2SO4 when H2SO4 that will react with 2LiOH.

                          0.1937 x 2x 18.01

                                 =6.977

                                  =6.98

Therefore, approximately 6.98 grams of water will be produced from 19 g of sulfuric acid.

Hope it helps!

In the electromagnetic spectrum , among the following ultraviolet rays carry the most energy.

The electromagnetic spectrum consists of electromagnetic radiation which consists of waves made up of electromagnetic field which are capable of propogating through space and carry the radiant electromagnetic energy.

The radiation are composed of electromagnetic waves which are synchronized oscillations of electric and magnetic fields . They are created due to change which is periodic in electric as well as magnetic fields.

In vacuum ,all the electromagnetic waves travel at the same speed that is with the speed of air.The position of an electromagnetic wave in an electromagnetic spectrum is characterized by it's frequency or wavelength.They are emitted by electrically charged particles which undergo acceleration and subsequently interact with other charged particles.

Learn more about electromagnetic spectrum,here:

https://brainly.com/question/15576247

#SPJ5

Final answer:

Ultraviolet waves carry the most energy out of the options provided, as they have a higher frequency than visible light, infrared waves, and microwaves.

Explanation:

The electromagnetic wave that carries the most energy among the options provided is ultraviolet waves (A). The energy of electromagnetic waves is related to their frequency. The higher the frequency, the more energy the waves carry. Ultraviolet waves have higher frequencies than visible light, infrared waves, and microwaves, which means they have more energy. It is important to note that waves like X-rays and gamma rays carry even more energy than ultraviolet waves. The general order from lowest to highest energy in electromagnetic waves is radio, microwave, infrared, visible, ultraviolet, X-ray, and gamma.

The percentage composition by mass of carbon in ethanoic acid is 40%

Answer:

40.00 %  

Step-by-step explanation:

Let's rewrite the formula of ethanoic acid as C₂H₄O₂.

The masses of each element are:

2C = 2 × 12.01  =  24.02   u

4H = 4 × 1.008 =    4.032 u

2O = 2 × 16.00 = 32.00   u

            TOTAL = 60.05   u

=====

% C = 24.02/60.05 × 100

% C = 0.400 × 100

% C = 40.00 %

Atomic mass of an element is the weighted average.

Answer: Order of the elements from most reactive to least reactive is:

Mg >  Zn > Fe > H > Cu

Explanation: Reactivity of the elements is the tendency of the elements to loose or gain electrons with ease.

As, all the given elements are metals, so the metals which will loose electrons easily will be more reactive. To study the reactivity of metals, we use reactivity series.

The metals which are more reactive are placed on the top of the reactivity series and which are less reactive are placed at the bottom.

Hence, the order of the elements from most reactive to least reactive is:

Mg >  Zn > Fe > H > Cu

Reactivity series is attached below.

Answer:

magnesium

Zinc

Iron

hydrogen

copper

Explanation:

Just took the course activity

CdCl2+2NH4NO3

It is substitution reaction

Cd is metal with 2+ which connect with Cl(-)

NO3 with NH4 form salt

Answer:

Cd(NO₃)₂ + 2NH₄Cl → CdCl₂ + 2NH₄NO₃

Explanation:

The reaction given is a double replacement reaction, which means that the reactants will dissociate and the ions will be changed between them. So, let's identify the ions.

At Cd(NO₃)₂, the metal Cd has cation Cd⁺², and the anion is NO₃⁻ (the number of ions is changed and the cation is the first to appear in the formula). At NH₄Cl, the cation is NH₄⁺ and the anion is Cl⁻, so the products are CdCl₂ and NH₄NO₃ (the cation comes first, and the charges are replaced between them).

So, the reacion will be:

Cd(NO₃)₂ + NH₄Cl → CdCl₂ + NH₄NO₃

To balance the equation, all the elements must have the same number on both sides, thus we need to multiply NH₄Cl and NH₄NO₃ by 2:

Cd(NO₃)₂ + 2NH₄Cl → CdCl₂ + 2NH₄NO₃

Answer : The pressure of the gas is, 14.925 atm

Solution :

using ideal gas equation,

[tex]PV=nRT[/tex]

where,

n = number of moles of gas  = 0.3 mole

P = pressure of the gas = ?

T = temperature of the gas = [tex]30^oC=273+30=303K[/tex]

R = gas constant = 0.0821 Latm/moleK

V = volume of the gas = 0.5 L

Now put all the given values in the above equation, we get the pressure of the gas.

[tex]P\times (0.5L)=(0.3mole)\times (0.0821L.atm/mole.K)\times (303K)[/tex]

[tex]P=14.925atm[/tex]

Therefore, the pressure of the gas is, 14.925 atm

It works because soap is made up of molecules with two very different ends.

Hope this Helps

Soap breaks up the oil (grease) into smaller drops, which can mix with the water. This is why we use soap to clean grease because it break it apart causing it to wash off object clean. Hope this help!!!:)

Answer is: D. Heat is released when atomic nuclei split.

Nuclear fission is a nuclear reaction or a radioactive decay where nucleus of atom split into smaller ligher nuclei.

Nuclear fission is exothermic reaction which release large amounts of energy (electromagnetic radiation or as kinetic energy, which heat reactors where fission reaction take place).

Nuclear energy is the energy found in the nucleus of an atom.

Answer is: D. Heat is released when atomic nuclei split.

Nuclear fission is a nuclear reaction or a radioactive decay where nucleus of atom split into smaller ligher nuclei.

Nuclear fission is exothermic reaction which release large amounts of energy (electromagnetic radiation or as kinetic energy, which heat reactors where fission reaction take place).

Nuclear energy is the energy found in the nucleus of an atom.

Answer: Option (D) is the correct answer.

Explanation:

An element is defined as a substance that contains atoms of one type.

For example, a piece of sodium metal will contain only atoms of sodium.

Therefore, it is a pure substance. Whereas a compound is a substance that consists of two or more different atoms in similar composition.

For example, [tex]CaCl_{2}[/tex] is a compound.

When elements change into compounds then they tend to change their chemical properties.

Hence, we can conclude that the statement they can only be separated by chemical methods, is true about the elements present in a pure substance.

Answer: Reducing the time of contact between the two objects will decrease the heat transfer between them.

Explanation:

the answer is d you guys and girls i just took it on the test

The chemical equation [tex]2Mg + O_{2} = 2MgO[/tex] reflects the principle of conservation of mass, showing an equal number of atoms for each element on both sides of the equation, thus balancing it.

The balance of the chemical equation [tex]2Mg + O_{2} = 2MgO[/tex] shows the principle of conservation of mass in chemistry. This principle states that the quantity of matter does not change in a chemical reaction.

Here, we have 2 atoms of magnesium (Mg) reacting with 1 molecule of oxygen ([tex]O_{2}[/tex]) to form 2 molecules of magnesium oxide (MgO). If you count the number of atoms of each element on both sides of the equation, you can see the balance: 2 magnesium atoms and 2 oxygen atoms on both sides.

https://brainly.com/question/13383562

#SPJ2

The given equation 2Mg + O₂ = 2MgO is already balanced, as there are equal number of each type of atom on the reactants and the product side.

To balance the chemical equation 2Mg + O₂ = 2MgO, we need to ensure that the number of molecules or atoms for each element on the reactant side (left) is the same as on the product side (right). This is in accordance with the Law of Conservation of Mass which states that matter cannot be created or destroyed. In this particular equation, we have 2 molecules of Magnesium (Mg) and one molecule of Oxygen (O₂) combining to give 2 molecules of Magnesium Oxide (MgO). If we inspect the equation, we'll see it's already balanced because the number of Mg and O atoms are same on both sides.

https://brainly.com/question/29233369

#SPJ2

Answer: [tex]NH_3[/tex]

Explanation:

a) [tex]H_2[/tex]: This  is a non polar covalent compound which are held by weak vanderwaal forces of attraction.

b) [tex]SO_2[/tex]: This  is a covalent compound which is polar due to the presence of lone pair of electrons and are held by dipole-dipole forces of attraction.

c) [tex]NH_3[/tex]: These are joined by a special type of dipole dipole attraction called as hydrogen bond. It forms between electronegative nitrogen atom and hydrogen atom and is the strongest interaction.

d) [tex]CF_4[/tex]: This  is a covalent compound and is non polar which are held by weak vanderwaal forces of attraction.

e)  [tex]BCl_3[/tex]: This  is a covalent compound and is non polar which are held by weak vander waal forces of attraction.

NH3 (Ammonia) experiences dipole-dipole forces as its strongest IMF due to its polar nature and the uneven distribution of electron density within the molecule.

The student's question asks to identify which molecule experiences dipole-dipole forces as its strongest intermolecular force (IMF). Dipole-dipole forces occur in polar molecules where there is an uneven distribution of electron density that creates dipoles, meaning one end of the molecule is slightly positive while the other end is slightly negative. Given the list of molecules, NH3 (Ammonia) experiences dipole-dipole forces as its strongest IMF because it is a polar molecule with a trigonal pyramidal structure, leading to a net dipole moment. Ammonia has a nitrogen atom with a lone pair that causes the molecule to be asymmetrical and polar, resulting in dipole-dipole attraction between molecules.

YYYEAAA

100% bro

Hope that help