How are hookworms transmitted?
A.by ticks and fleas
B. by contaminated water
C.by air dispersal
D. by skin contact
E. by mosquitoes

The gravitational potential energy of the ball decreases as it rolls down the hill while the gravitational kinetic energy of the ball increases due to its acceleration in velocity.

Answer:food

Explanation:cause

Answer:

The law of conservation of mass states that in a chemical reaction, mass is neither created nor destroyed.Carbon dioxide becomes glucose and oxygen during photosynthesis.

The answer is 4. basalt.

Here's why:

Location B is at the Mid-Atlantic Ridge. This is a divergent plate boundary, where plates are moving apart and magma is rising from the mantle.

Magma that rises at the Mid-Atlantic Ridge is basaltic. Basalt is a fine-grained, dark-colored igneous rock formed by the rapid cooling of magma.

Granite and rhyolite are not typically found at Mid-Atlantic Ridges. They are felsic igneous rocks, which are lighter in color and coarser-grained than basalt. They are more commonly found in continental settings, where magma cools slowly underground.

Conglomerate is a sedimentary rock. It is formed from the erosion and deposition of other rocks, not from the cooling of magma.

Therefore, based on the location and the type of rock formation that occurs at Mid-Atlantic Ridges, the rock samples taken from location B would most likely be composed of basalt.

The diagram below shows a portion of earths crust near the mid Atlantic ridge. Letters A B C D and E represent locations on the sea floor. Rock samples taken from location B would most likely be composed of

1. granite

2. rhyolite

3. conglomerate

4. basalt​

Answer:

It's c (13)

12 is Freezing

Explanation:

Answer: C ( Enzyme Action

Question:

Which of the following shows a reduction of chromosomes by half? (3 points)

Answer:

Final answer:

The temperate forest biome is common in mid-latitude regions with moderate temperatures and consistent precipitation, leading to distinct seasons. Deciduous trees dominate and create a nutrient-rich leaf litter layer that insulates the ground and provides habitats for organisms, playing a key role within the system. Organisms adapt through hibernation, migration, and the cyclical nature of plant life, ensuring a balance within the ecosystem.

Explanation:

Temperate Forest Biome

Temperate forests are a biome found in mid-latitude regions across the globe, particularly prevalent in areas such as eastern North America, Western Europe, Eastern Asia, Chile, and New Zealand. Characterized by their moderate temperatures that range between -30°C and 30°C (-22°F to 86°F), these forests experience seasons, with growing periods in the spring, summer, and early fall, and temperatures dropping below freezing annually. Precipitation in these biomes is fairly consistent year-round, with amounts ranging from 75 cm to 150 cm (29.5 to 59 inches).

In a temperate forest, you'll find a mix of deciduous trees, which shed their leaves in autumn, and evergreen conifers. These deciduous trees significantly contribute to the forest dynamic by creating a thick layer of leaf litter on the forest floor. This layer is not only rich in inorganic and organic nutrients, but as it decays, it returns nutrients to the soil, protects against erosion, insulates the ground, and provides habitats for various invertebrates and their predators.

Organisms in the temperate forest have adapted to this environment in several ways. Many animals hibernate or migrate to cope with the cold winters, while plant species have seasonal cycles. This biodiversity in the temperate forests is sustained by sunlight reaching the ground due to the moderate growth of tree canopies compared to tropical rainforests, which allows for a variety of plants and animals to thrive.

Functioning as a System

The components of the temperate forest biome work together as a system. The trees provide habitat and food for animals, the leaf litter enriches the soil, and the diversity of species supports a balanced ecosystem. In turn, animals contribute to the pollination of plants and the dispersion of seeds, which ensures the ongoing regeneration of the forest.

Geothermal energy is a practical, renewable energy source that works best when magma pools are close to the Earth's surface. Contrary to the false statement, it is most effective in volcanically active areas.

In assessing the statements about geothermal energy, the untrue statement is: a. it is not a practical source of energy. In reality, geothermal energy is highly practical, particularly in regions where volcanic activity or other heat sources exist near the Earth's surface. Geothermal energy is a renewable source of energy because it is constantly replenished by the heat generated by the Earth's core. This heat is used to produce steam, which then powers turbines to generate electricity. Geothermal energy works best when the magma, or molten rock, pool is close to the Earth's surface, making statement c is also correct. Therefore, geothermal energy is not only a practical source of energy, but it is also renewable and advantageous in certain geographical settings, particularly those that are volcanically active (statement b).

https://brainly.com/question/1061324

#SPJ6

Answer:

They only differ from each other in wavelength. The electromagnetic spectrum includes, from longest wavelength to shortest: radio waves, microwaves, infrared, optical, ultraviolet, X-rays, and gamma-rays.

Explanation:

Answer:

The third and second is the  correct!

Explanation:

For example, cooling water will cause it to become ice.

As for the second one, if you heat up liquid, the particles move faster, causing the liquid to evaporate and become a gas

Hope i helped! :3

had a brain fart, sorry, i fixed it

Answer:

Plants, animals, factories.

Explanation:

Plants and animals are living organisms that undergoes aerobic respiration that takes in Oxygen and released carbon dioxide.

Do not be mislead that plants do not give out CO2. During the night, when rate of photosynthesis is slower than rate of respiration, CO2 is released to the atmosphere and acts as a source of CO2.

Animals can only respirate and not photosynthesize. Hence, it is definitely a source of CO2

Factories are sources of CO2 assuming that their operations releases CO2 as by-product which is a very probable event for most factory operations.

Sunlight is a abiotic factor that does not cause CO2 to be released on its own to act as a source of CO2 in the atmosphere.

Plants, animals, and factories are sources of carbon dioxide in the atmosphere.

Plants, animals, and factories are significant sources of carbon dioxide emissions into the Earth's atmosphere. Plants play a dual role in the carbon cycle. During photosynthesis, they absorb CO2 and convert it into oxygen (O2) and organic carbon compounds, helping regulate atmospheric CO2 levels. However, when plants decay or burn, they release CO2 back into the atmosphere.

Animals, through respiration, release CO2 as a byproduct of metabolism. This carbon comes from the food they consume, and when they exhale, it contributes to atmospheric CO2 levels. Factories, particularly those burning fossil fuels for energy and industrial processes, release substantial amounts of CO2 as a result of combustion. These human activities significantly impact global carbon levels and contribute to climate change and global warming. Sustainable practices and reduced emissions are critical to mitigate these effects.

https://brainly.com/question/32421579

#SPJ2

Answer:

The 3 types of muscle tissue are cardiac, smooth, and skeletal.

Explanation:

Cardiac: Cardiac muscle cells are located in the walls of the heart, appear striated, and are under involuntary control.

Smooth: Smooth muscle (so-named because the cells do not have striations) is present in the walls of hollow organs like the urinary bladder, uterus, stomach, intestines, and in the walls of passageways, such as the arteries and veins of the circulatory system, and the tracts of the respiratory, urinary, and reproductive

Skeletal: Skeletal muscle is found between bones, and uses tendons to connect the epimysium to the periosteum, or outer covering, of bone.

Final answer:

The three types of muscles in the human body are skeletal muscles for voluntary movement, smooth muscles in internal organs for involuntary functions, and cardiac muscle found only in the heart. They differ by striation, control, and location.

Explanation:

The human body has three major types of muscle tissues: skeletal, smooth, and cardiac muscles. Each type has distinct characteristics and locations within the body.

Skeletal Muscles

Skeletal muscles are attached to bones and are responsible for voluntary movements. These muscles display a striped, or striated, appearance under a microscope and are usually under conscious control. Examples include the biceps and quadriceps

Smooth Muscles

Smooth muscles are found in the walls of internal organs such as the stomach, intestines, and blood vessels. They control involuntary movements and do not show striations, appearing smooth under a microscope.

Cardiac Muscle

The cardiac muscle is specialized muscle tissue found only in the heart. It is striated like skeletal muscle but operates involuntarily, controlling the heartbeat.

Striated muscles: Skeletal and cardiac muscles

Non-striated muscle: Smooth muscle

Voluntary muscle: Skeletal muscle

Involuntary muscles: Smooth and cardiac muscles

Answer:

Option A

Explanation:

Hoping it helps!

Answer:

Producers

Explanation:

Ape-x

Transcription begins when RNA polymerase binds to the promoter of the gene. It then works to assemble RNA nucleotides into a strand that complements the DNA template, till it reaches a termination sequence.

For transcription to begin in a cell, the first thing that needs to occur is that RNA polymerase attaches itself to the promoter of the gene. The promoter is a specific DNA sequence that indicates where the process of transcription should start. The RNA polymerase is an enzyme that carries out the process of transcription, forming a new mRNA molecule by reading the DNA strand.

https://brainly.com/question/32921071

#SPJ6

Answer:

The amount of the lighted side of the moon you can see is the same during

a. new moon and full moon phase.

b. new moon and first quarter phase.

c. first quarter and third quarter phase.

d. full moon and third quarter phase.

Please select the best answer from the choices provided

Explanation:

c

Answer:

i think its reactant

Explanation:

just a gut feeling

Answer:2/3

Explanation:

this is the ancwer i got

Final answer:

The proportion of F2 progeny with the allele for wrinkled skin is expected to be 1/4 when considering a dihybrid cross of two heterozygous pea plants. This is based on the principles of Mendelian genetics and the monohybrid 3:1 ratio characteristic of a single trait with one dominant and one recessive allele.

Explanation:

When considering a dihybrid cross and determining the proportion of progeny that carries an allele for a specific trait such as wrinkled skin in peas, we utilize the principles of Mendelian genetics, particularly the concept of independent assortment and dominance.

For the trait of seed texture, the allele for wrinkled skin in peas is recessive, typically represented as 'r'. In a dihybrid cross of two heterozygous F1 plants (RrYy), we expect to see a phenotypic ratio of 9:3:3:1, which can be broken down into two separate monohybrid 3:1 ratios, one for each trait. Thus, considering only the texture, three-quarters of the F2 offspring will display the dominant round phenotype (R_), and one-quarter will display the recessive wrinkled phenotype (rr). This is because the proportion of F2 progeny with wrinkled skin (homozygous recessive condition rr) is expected to be 1/4, as determined by the product of the probabilities for each independent event: (1/4) × (1/4).

Answer:

C. UV rays reacting with the O2 molecules

Explanation:

Answer:

UV rays reacting with the O2 molecules

Explanation:

edmentum

Answer:

water pressure is correct answer

Explanation:

The force exerted by a seedling as it pushes through the soil is due to the water pressure inside its cells, known as turgor pressure, which is a result of water potential differences that cause water to move into cells.

The correct option is 'D'.

The force exerted by a seedling as it pushes its way through the soil is due to the water pressure created inside its cells. This water pressure is also known as turgor pressure, which occurs when water moves into plant cells, causing them to swell and become turgid.

These processes are influenced by the water potential in the plants, which is a measure of the potential energy in water in comparison to pure water.

The water potential is affected by several factors like solute concentration and pressure.

When the water potential within the soil is higher than inside the plant cells, water moves into the cells via osmosis, generating pressure that helps to push the seedling upwards through the soil. Turgor pressure is vital for plant rigidity and growth.

Answer:

C. Noise pollution

Explanation:

Ben is susceptible to the noise pollution and the air pollution, and may be water pollution too, because the air pollution is someway related to the water pollution and the soil pollution too. However, C is the best answer for this question.

....

Hope this answer can help you. Have a nice day!

Answer:

All of the above.

Explanation:

If the news reports are brief, they probably will leave out information. If the info comes from only one source, it may or may not be reliable.

Answer:

Explanation:

1.A

2.C

3.B

4.C

Answer:

The battery is the set of vertical lines at the bottom, so there's one battery.

The switches are the line between the small circles (they're closed here) there are 2 of them.  

The circles with Xs inside are bulbs.  

So B is correct.

In this circuit diagram, one battery, two switches, and three light bulbs are shown.

What are the characteristic features of circuit diagram?

A circuit diagram is a graphical representation of an electrical circuit. A pictorial circuit diagram uses simple images of components, while a schematic diagram shows the components.

A circuit diagram is a simplified graphical representation of an electrical circuit. Circuit diagrams are used for the design, construction and maintenance of electrical and electronic equipment.

There are 6 types of circuit diagrams, namely: Block Diagram, Schematic Circuit Diagram, Pictorial Circuit Diagram, Single Line Circuit Diagram, Open Circuit Diagram and Closed Circuit Diagram.

Learn more about circuit diagram:

https://brainly.com/question/24090935

#SPJ5

Answer: energy produced in the core travels through out the gases of Sun and takes about million years to reach its surface

Explanation:

Answer:

what

Explanation:

Answer:

hope this helps

Explanation:

Through sunspots that are centers of high magnetic field, that have 11 year cycles.

Explanation:

In the Sun, the flows of hot plasma in the convection zone create the solar magnetic field. This is sustained by nuclear fusion in the Sun. Sunspots are regions of very strong magnetic field that are perceptible on the Sun's surface or photo-sphere. The number of sunspots on the sun increase and decrease over time in a regular, approximately 11-year cycle, which is, in fact the solar magnetic activity cycle.

To translate the mRNA we have what the original code is GGCCAAUU and when translating we find that CCGGUUAA

mRNA is translated into protein by the action of a variety of tRNA molecules, each specific for each amino acid. The nucleotide sequence of an mRNA molecule is translated into the appropriate amino acid sequence as determined by the genetic code.

So in this case performing the translation of the mRNA we find that it will be GGCCAAUU for the following code CCGGUUAA.

See more about mRNA at brainly.com/question/12903143

#SPJ2

Answer:

mm

Explanation:

the only way for it to be recessive, is to remove the dominant

The genotype for a recessive offspring in this scenario is 'mm,' as this reflects the presence of two copies of the recessive allele required for the recessive trait to be expressed.

The genotype for a recessive offspring, when "M" represents the dominant condition and "m" represents the recessive condition for a trait, would be mm. This is because a recessive trait is only expressed when an individual has two copies of the recessive allele.

Therefore, for the offspring to display the recessive trait, both alleles must be m, resulting in the homozygous recessive genotype mm. Genotypes are often abbreviated using a single letter, with the dominant trait typically indicated by a capital letter and the recessive trait by a lowercase letter. In cases where "B" represents a dominant black allele and "b" a recessive brown allele, the parallel is that a recessive brown offspring would have the genotype bb.

Answer:

D. C=C

Explanation:

please give brainliest