Light rays that enter the hole of a pinhole camera form _____ on the back wall of the camera.
Light rays entering a pinhole camera form an inverted image on its back wall; the idea is inverted because light travels in straight lines and doesn’t reorient upon entering the pinhole.
Explanation:
Light rays that enter the hole of a pinhole camera form an inverted image on the back wall of the camera. This occurs as the light rays from an object diverge, and only a tiny portion of these rays enter the pinhole, causing them to form an image. Notably, this image is flipped upside down - or inverted - because light travels in straight lines, and the rays do not reorient themselves after entering the pinhole. An important aspect to understand is that these rays do not cross each other upon entering the pinhole, thereby ensuring the formation of a clear and inverted picture on the back wall of a pinhole camera. This is fundamentally akin to how light enters the human eye to form an image on the retina, where a similar effect is also observed, resulting in the need for the brain to flip the image right-side up for us to perceive our surroundings correctly.
Learn more about Pinhole Camera and Inverted Images here:https://brainly.com/question/35914613
#SPJ12
How long does it take Anya to cover the distance of 5 miles if Ilya and Anya each can run at a speed of 8.70 mph and walk at a speed of 3.30 mph. They set off together on a route of length 5 miles. Anya walks half of the distance and runs the other half. Ilya Walks half of the time and runs the other half.
A particular lever can lift a load with 80 percent efficiency. If 40 N of effort is applied 2.5 meters from the fulcrum, then what is the maximum load that can be lifted 1.5 m from the fulcrum?
A) 5333 N
B) 1920 N
C) 66.7 N
D) 53.3 N
Final answer:
To find the maximum load a lever can lift given its efficiency and distances from the fulcrum, calculate the mechanical advantage, then adjust for efficiency. The maximum load with 80 percent efficiency is 53.3 N, answer D.
Explanation:
The question is about calculating the maximum load that a lever can lift, given its efficiency, the effort applied, and the distances from the fulcrum on both the effort and the resistance arms. To solve this problem, we use the concept of mechanical advantage (MA) and take into account the efficiency of the lever.
The mechanical advantage (MA) of a lever is the ratio of the effort arm length to the resistance arm length. Therefore, MA = Effort Arm / Resistance Arm. In this case, MA = 2.5m / 1.5m = 1.6667.
Since the lever is at 80 percent efficiency, the actual maximum load will be less than the theoretical maximum load. If the effort is 40 N, then theoretically, the lever could lift a load of MA × Effort = 1.6667 × 40 N = 66.667 N. Considering the 80 percent efficiency, the actual maximum load that can be lifted is 0.8 × 66.667 = 53.3 N. Therefore, the correct answer is D. 53.3 N.
pete is driving down 7th street. He drives 150 meters in 18 seconds . Assuming he does not speed up or down, what is his speed in meters per second ?
If 600 J work is done in 3s what is power?
What causes the vivid bands seen in jupiter's upper atmosphere?
w h a t i s h e a t ????
HELP PLEASE
Can some please clearly explain the thermal energy equation?
Q=m(Tf - Ti)C
I know that Q is change in thermal energy which is measured in joules m is mass the Ts mean change in temperature and C is specific heat.
What i want to know is how to do the equation. My book doesn't explain it well. Please take your time to explain CLEARLY my brain is dead -_- you can use illustrations or whatever but please do so CLEARLY. Thanks!
Which portrays inadequate data?
A.Geoff uses another classmate’s data because he forgot to record his own experiment’s temperature readings.
B.Shelby accidentally switches steps 3 and 4 while writing her laboratory procedure.
C.Rupal determines aluminum is the most reactive metal by completing only half of her experiment.
D.Juan records the density of acetone in grams per cubic liters instead of grams per milliliters.
Answer:
the answer is c
Explanation:
took the test
What results from splitting an atomic nucleus?
2 atoms identical to the original atom are formed
2 new atoms different from the original atom are formed
2 atoms are chemically joined
1 new atom different from the original is formed
Splitting an atomic nucleus, also known as nuclear fission, results in the formation of two new atoms different from the original. These new atoms are often smaller, more stable, and radioactive.
Explanation:When an atomic nucleus is split, the process typically results in the formation of two new atoms which are different from the original atom. This process is referred to as nuclear fission. It's important to note that nuclear fission often results in atoms that are smaller and more stable than the original, but they are not necessarily identical. These new atoms are often radioactive, meaning they emit radiation. Additionally, an enormous amount of energy is usually released during the process.
Learn more about Nuclear Fission here:https://brainly.com/question/913303
#SPJ3
What is the answer to some ancient civilizations used units of measure based on the length of certain seeds. What kinds of problems might you expect with such a system?
Why does metal feel colder than cardboard? Enter in complete sentences
Teams red and blue are having a tug-of-war. According to Newton's third law, the force with which the red team pulls on the blue team exactly equals the force with which the blue team pulls on the red team.How can one team ever win?
According to Newton's third law, the forces between the red and blue teams cancel each other out. However, the team that can exert a larger net force on the ground will be able to win the tug-of-war. Net force accounts for the forces between each team and the ground.
Explanation:According to Newton's third law of motion, the force with which the red team pulls on the blue team is exactly equal in magnitude and opposite in direction to the force with which the blue team pulls on the red team. So, it may seem like neither team can win because the forces cancel each other out. However, the key to understanding how one team can win lies in the concept of net force.
Net force is the vector sum of all the individual forces acting on an object. In the case of the tug-of-war, each team is exerting a force on the other, but they are also exerting a force on the ground. These ground forces are in opposite directions, but they are not equal in magnitude, as the ground provides more resistance to one team than the other.
Therefore, the team that can exert a larger net force on the ground will be able to accelerate in that direction and win the tug-of-war. It's not just about the forces between the teams, but also the forces between each team and the ground.
Learn more about Newton's Third Law of Motion here:https://brainly.com/question/974124
#SPJ2
Rounded to the nearest whole number, what is the atomic mass of platinum
It takes _______________ energy to recycle waste aluminum (e.g., beverage cans) compared to the energy of extracting new aluminum from bauxite.
A rock is dropped at the same instant that a ball at the same height is thrown horizontally. which will will have the greater speed when it reaches the ground? ball rock both will reach at the same time impossible to answer
if a stone with the original velocity of 0 is falling from a ledge and takes 8 seconds to hit the ground,what is the the final velocity of the stone?
Answer:
78.4 m/s
Explanation:
An elevator accelerates upward at 1.2 m/s 2 . the acceleration of gravity is 9.8 m/s 2 . what is the upward force exerted by the floor of the elevator on a(n) 76 kg passenger? answer in units of n.
The upward force exerted on the passenger is 836 N.
The given parameters;
acceleration of the elevator, a = 1.2 m/s²acceleration due to gravity, g = 9.8 m/s²mass of the object, m = 76 kgThe upward force on the object can be determined by applying Newton's second law of motion.
Since the elevator is ascending upwards, the force on the elevator will become greater and the passenger feels a heavier weight.
∑F = ma + mg
F = m(a + g)
F = 76(1.2 + 9.8)
F = 836 N.
Thus, the upward force exerted on the passenger is 836 N.
Learn more here: https://brainly.com/question/19887955
There are many ways to increase the solubility of a solid in a liquid, but how would you decrease it?
A.
Decrease air pressure
B.
Decrease water temperature
C.
Increase air pressure
D.
Increase water temperature
A car moving at a speed of 8.0 meters per second enters a highway and accelerates at 3.0 meters per second^2. How fast will the car be moving after it has accelerated for 56 meters?
Answer:
Final speed of the car, v = 20 m/s
Explanation:
It is given that,
Initial speed of the car, u = 8 m/s
Acceleration of the car, [tex]a=3\ m/s^2[/tex]
Let v is the speed of the car after it has accelerated for 56 meters. It can be calculated suing the third equation of motion. It is given by :
[tex]v^2-u^2=2ad[/tex]
[tex]v^2=u^2+2ad[/tex]
[tex]v^2=(8)^2+2\times 3\times 56[/tex]
v = 20 m/s
So, the car is moving after it has accelerated for 56 meters is 20 m/s. Hence, this is the required solution.
Cpu speed, also called clock speed, is currently measured in __________.
After the fission of U-235 takes place, how many neutrons does the missing nucleus have?
A)
84
B)
85
C)
141
D)
143
Answer:
B) 85
Explanation:
In the nuclear fission of uranium-235, a nucleus of uranium-235 absorbs a slow-moving neutron and then decays into a nucleus of Kripton-92, a nucleus of Barium-141 (which is the missing nucleus in the figure) and three more neutrons.
Knowing that:
- Uranium has atomic number 92, so it has 92 protons
- Kripton has atomic number 36, so it has 36 protons
- Barium has atomic number 56, so it has 56 protons
We can calculate the number of neutrons in the nucleus of barium, since we know that the total number of neutrons must be conserved. We have:
- On the left side of the reaction: (235-92) neutrons of the uranium + 1 neutron absorbed = 144 neutrons
- On the right side of the reaction: (92-36) neutrons of the krypton + X neutrons of the barium + 3 neutrons = 144
So we get:
56 + X + 3 = 144
X = 85
So, the nucleus of barium has 85 neutrons.
A child is riding a bike and skids to a stop. what happens to their kinetic energy?
When h2o is removed from the mixture does the equilibrium shift to the right to the left or is there no shift?
Which of the following does notaccurately describe transistors?
A. Both NPN and PNP transistors consist of an emitter, base, and collector. B. Both NPN and PNP transistors consist of a base composed of an N-type material. C. Both NPN and PNP transistors consist of P-type and N-type material. D. Both NPN and PNP transistors operate in the same manner but with interchanged terminals and opposite directions of voltage and current.
Why is an air mass unlikely to form over the rocky mountains of north america?
a pebble is dropped down a well and hits the water 1.5 seconds later. using the equations for motion with constant acceleration, determine the distance from the edge of the wall to the water's surface.
Answer: 11.025
Explanation:
Let h = the distance from the edge of the wall to the water surface (m).
Use g = 9.8 m/s² and neglect air resistance.
The initial vertical velocity of the pebble is zero.
Because the pebble hits the surface of the water after 1.5 s, therefore
h = (1/2)*(9.8 m/s²)*(1.5 s)² = 11.025 m
The pitch of a sound wave is its _________.
A.speed B.amplitude C.frequency D.wavelength
What happend to the force of gravity between two subjects if the distance between them decreases?
A liquid retains a fixed volume regardless of the shape of the container which holds it. truefalse
The answer is true : )