The Cartesian coordinate point (-5,5) can be re-written in polar coordinates in two ways. The polar coordinates equivalent to (-5,5) in the range 0 <= theta < 2pi are (5sqrt(2), 7pi/4) and in the range -2pi <= theta < 0 are (5sqrt(2), -pi/4).
Explanation:The Cartesian coordinate point (-5,5) can be expressed in polar coordinates using the polar coordinates formula: r = sqrt(x^2 + y^2) and theta = arctan(y/x).
For the first part of the question, we are asked to find the polar coordinates where the angle lies in the range 0 <= theta < 2pi. Using the two formulas above, we find r to be sqrt((-5)^2 + 5^2) = sqrt(50) or 5sqrt(2). The angle theta can be calculated using arctan(5/-5) = -pi/4. We add 2pi to this angle because theta should not be negative, and thus obtain a final result of (7pi/4). So, the polar coordinates equivalent to (-5,5) in the range 0 <= theta < 2pi are (5sqrt(2), 7pi/4).
For the second part of the question, we need the polar coordinates where the angle theta lies in the range -2pi <= theta < 0. In this case, the value for r remains the same as before. However, the angle is -pi/4, because it needs to be negative. Hence, the polar coordinates equivalent to (-5, 5) in the range -2pi <= theta < 0 are (5sqrt(2), -pi/4).
Learn more about Polar Coordinates here:https://brainly.com/question/36617145
#SPJ11
A banner is hung for a party. The
distance from a point on the bottom edge of
the banner to the floor can be determined by
using the function f(x) = 0.25x 2 − x + 9.5,
where x is the distance, in feet, of the point
from the left end of the banner. How high
above the floor is the lowest point on the
bottom edge of the banner? Explain.
Answer:
8.5 feetExplanation:
The function that can determine the distance from a point on the bottom edge of the banner to the floor is:
[tex]f(x)=0.25x^2-x+9.5[/tex]
That function is a quadratic function which means that it is a parabola. Given that the coefficient of the quadratic term (0.25) is positive, the parabola open upwards, and the vertex is the lowest point of the parabola and it represents how high above the floor is the lowest point on the bottom edge of the banner.
So, you need to find the vertex of the parabola.
I will complete squares to find the form A(x -h)² + k, where h and k are the coordinates of the vertex (h, k).
[tex]f(x)=0.25x^2-x+9.5\\ \\ 4(f(x))=4(0.25x^2-x+9.5)\\ \\ 4f(x)=x^2-4x+38\\ \\ 4f(x)-38=x^2-4x\\ \\ 4f(x)-38+4=x^2-4x+4\\ \\ 4f(x)-34=(x-2)^2\\ \\ 4f(x)=(x-2)^2+34\\ \\ f(x)=(1/4)(x-2)^2+8.5[/tex]
Hence, the vertex (h,k) is (2, 8.5), meaning that the lowest point on the bottom edge of the banner is at 2 feet from the left edge of the banner and 8.5 feet above the floor.
The lowest point on the bottom edge of the banner which results in a height of 8.5 feet above the floor.
To find the height above the floor of the lowest point on the bottom edge of the banner using the function f(x) = 0.25x^2 - x + 9.5, we need to determine the vertex of this quadratic function. The vertex form of a quadratic function f(x) = ax^2 + bx + c gives the minimum or maximum value of the function.
Here, the coefficient a is positive (0.25), indicating that the parabola opens upwards and thus has a minimum point. The x-coordinate of the vertex can be found using the formula x = -b / (2a).
Identify the coefficients: a = 0.25 and b = -1.Calculate the x-coordinate of the vertex: x = -(-1) / (2 * 0.25) = 2 feet.Substitute x = 2 back into the function to find the minimum height:
f(2) = 0.25(2)^2 - 2 + 9.5 = 1 - 2 + 9.5 = 8.5 feet.
Therefore, the lowest point on the bottom edge of the banner is 8.5 feet above the floor.
Law School According to the Law School Admission Council, in the fall of 2007, 66% of law school applicants wereaccepted to some law schooL4 The training program LSATisfaction claims that 163 of the 240 students trained in 2006were admitted to law school. You can safely consider these trainees to be representative of the population of law schoolapplicants. Has LSAfisfaction demonstrated a real improvement over the national average?a) What are the hypotheses?b) Check the conditions and find the P-value.c) Would you recommend this program based on what you see here? Explain.
Answer:
a) [tex]H_{0}: p = 0.66\\H_A: p > 0.66[/tex]
b) P-value = 0.2650
c) No, this programme will not be recommended as there is no real improvement over the national average.
Step-by-step explanation:
We are given the following in the question:
Sample size, n = 240
p = 66% = 0.66
Alpha, α = 0.05
Number of students admitted to law school , x = 163
a) First, we design the null and the alternate hypothesis
[tex]H_{0}: p = 0.66\\H_A: p > 0.66[/tex]
This is a one-tailed(right) test.
Formula:
[tex]\hat{p} = \dfrac{x}{n} = \dfrac{163}{240} = 0.6792[/tex]
[tex]z = \dfrac{\hat{p}-p}{\sqrt{\dfrac{p(1-p)}{n}}}[/tex]
Putting the values, we get,
[tex]z = \displaystyle\frac{0.6792-0.66}{\sqrt{\frac{0.66(1-0.66)}{240}}} = 0.6279[/tex]
b) Now, we calculate the p-value from the table.
P-value = 0.2650
c) Since the p-value is greater than the significance level, we fail to reject the null hypothesis and accept the null hypothesis.
Thus, there is no real improvement over the national average.
No, this programme will not be recommended as there is no real improvement over the national average.
Matrix multiplication and addition
Answer:
matrices can be simple added by ading the adjacent elements of the two matrices
The matrix multiplication is done by multiplying row of first matrix to columns of the other matrix.
each multiplication for each element of the resultant matrix.
Step-by-step explanation:
A sum is invested at 4% continuous interest. This means that its value grows exponentially with k equaling the decimal rate of interest. Find, to the nearest tenth of a year, the time required for the investment to double in value.
Answer:
T = 72/4 = 18years
T = 20years (to the nearest tenth)
Step-by-step explanation:
Using the rule of 72, which is used to estimate the number of years for a given investment to double at a given interest rate.
Doubling time = 72/interest rate
T = 72/r
Rate r (in percentage) = 4%
Time T (in years)
T = 72/4 = 18years
T = 20years (to the nearest tenth)
The World Health Organization wishes to estimate the mean density of people per square kilometer. They collect data on 56 countries. State the individual, variable, population, sample, parameter, and statistic:_____________.
Individual: A single country.
Variable: The mean density of people per square kilometer of all countries.
Population: Set of all countries.
Sample: Set of the 56 countries on which data is collected.
Parameter: The mean density of people per square kilometer calculated from the population.
Statistic: The mean density of people per square kilometer calculated from the sample.
Explanation:Individual: Individuals are the objects described by a set of data.
Variable: Variables are characteristics of individuals.
Population: Population is all individuals of interest.
Sample: Sample is a subset of the population.
Parameter: Parameter is a characteristic of a population.
Statistics: Statistic is a characteristic of a sample.
The individual is the country, the variable is the density of people per square kilometer, the population is all the countries in the world, the sample is the 56 countries, the parameter is the true mean density of all countries, and the statistic is the estimated mean density from the 56 sampled countries.
Explanation:In the example given, the individual is each of the 56 countries from which the World Health Organization collects data. The variable is the density of people per square kilometer in each of these countries. The population consists of all the countries in the world. The sample includes the 56 countries for which data was collected. The parameter is the true mean density of people per square kilometer for all countries. Finally, the statistic is the estimated mean density of people per square kilometer based on the data from the sample of 56 countries.
Learn more about Statistics here:https://brainly.com/question/31538429
#SPJ3
A researcher wants to determine the impact of soil type on the growth of a certain type of plant. She grows three plants in each of four different types of soil and measures the growth in inches for each plant after one month resulting in the data below.Soil 1 Soil 2 Soil 3 Soil 412.6 12.2 12.2 11.112.6 12,1 0.6 11.714.3 13,9 1 9.6 What null hypothesis is the researcher testing if she runs an ANOVA with this data?a. The mean growth of the plant in each type of soil is the same.b. One type of soil has a higher mean growth for the plant than the others. c. The variability in growth of the plant in each type of soil is the same.d. oil 3 provides a lower mean growth for the plant than the other types of soil.e. The mean growth of the plant is different in each type of soil.
Answer:
a. The mean growth of plant is same for each type of soil.
Step-by-step explanation:
The analysis of variance is statistical procedure used to assess the equality of more than two means by computing two different estimate of variances. Basically when we have more than two means to compare, we can't use t-test or z-test because these procedure will be tedious and time taking. So, the null hypothesis will be the same. Hence the null hypothesis in the given scenario is that "the mean growth of plant is same for each type of soil".
True or False: Like the edges of a filled-in area, the endpoints of a polygon do not need to conform to snap points.
Answer:
The answer is "False."
Explanation:
An area is considered the amount of space that an object occupies. A filled-area subjects the object to be made up of lines. These lines connect with each other to form an "edge."
The connection of the lines in order to define the object's shape or area are considered "snap points." Remember that "polygons" are made of line segments, where their endpoints meet with each other in order to define its closed shaped. Thus, it needs to conform to "snap points."
This explains the answer.
The given statement "Like the edges of a filled-in area, the endpoints of a polygon do not need to conform to snap points" is false.
The edge of a filled-in area is the boundary of the surface. Area is a two-dimensional space covered by any surface. The boundary of the surface is generally the edges of the area. The edges or the boundary should connect in order to make a closed area or surface.
Similarly, snap points are the end points of the sides of a polygon. These endpoints need to connect with each other in order to make a closed figure. Polygon is a closed figure with n number of sides.
Therefore, the given statement "Like the edges of a filled-in area, the endpoints of a polygon do not need to conform to snap points" is false.
For more details, refer to the link:
https://brainly.com/question/19554667
A summary measure that is computed to describe a population characteristic from a sample is called a: A) statistic. B) census. C) parameter
Answer:
A. Statistic
Step-by-step explanation:
Usually whole population is difficult to cover so the part of population is considered to assess the aspects of population. The statistic is the quantity which summarizes the sample. The problem illustrate that summary measure is calculated from sample to describe a population. As the summary measure is computed from sample then it is a statistic.
If sinФ = 1/6 . what are the values of cosФ and tanФ? Show steps
sinФ = 1/6
sinФ = opposite/hypotenuse
cosФ = adjacent/hypotenuse
tanФ = opposite/adjacent
SOHCAHTOA
1^(2)+b^(2)=6^(2)
1+b^(2)=36
b^(2)=35
[tex]\sqrt{35}[/tex]
cosФ = [tex]\sqrt{35}[/tex]/6
tanФ = 1/[tex]\sqrt{35}[/tex] = [tex]\sqrt{35}[/tex]/35
Answer:
Cos ø = √35/6
Tan ø = √35/35
Step-by-step explanation:
Sin ø = opposite/hypothenus
Sin ø = 1/6
Pythagoras theorem says
Hyp² = Opp² + Adj²
6² = 1² + A²
A² = 35
A = √35
Hence, cos ø = √35/6
tan ø = 1/√35 = √35/35
Chemistry is an experimental science in which a consistent system of measurements is used. Scientists throughout the world use the International System of Units (Système International or SI), which is based on the metric system. However, the metric system in not used on an everyday basis in the United States. It is often necessary to convert between the English system, which is used in the United States, and the SI system. One problem with the SI system is the size of the units sometimes turns out to be inconveniently large or small. Therefore it is often necessary to make conversions within the SI system. For this reason, SI units are modified through the use of prefixes when they refer to either larger or smaller quantities.
Part A
In Europe, gasoline efficiency is measured in km/L. If your car's gas mileage is 22.0mi/gal , how many liters of gasoline would you need to buy to complete a 142-km trip in Europe? Use the following conversions:1km=0.6214mi and 1gal=3.78L.
Part B
While in Europe, if you drive 115km per day, how much money would you spend on gas in one week if gas costs 1.10 euros per liter and your car's gas mileage is 30.0mi/gal ? Assume that 1euro=1.26dollars.
Part C
A sprinter set a high school record in track and field, running 200.0 m in 20.9s . What is the average speed of the sprinter in kilometers per hour?
Part D
A specific brand of gourmet chocolate candy contains 7.00 g of dietary fat in each 22.7-g piece. How many kilograms of dietary fat are in a box containing 4.00lb of candy?
Answer:
(a) 142 km trip requires 15.16 Liters of Gasoline
(b) The money spent is 69.34 euros or $87.37.
(c) The average speed of sprinter is 34.45 km/h.
(d) 4 lb of candy contains 0.559 kg of dietary fat.
Step-by-step explanation:
(a)
Given that;
Mileage = 22 mi/gal
Converting it to km/L
Mileage = (22 mi/gal)(1 gal/3.78 L)(1 km/0.6214 mi)
Mileage = 9.36 km/L
Now, the gasoline required for 142 km trip:
Gasoline Required = (Length of trip)/(Mileage)
Gasoline Required = (142 km)/(9.36 km/L)
Gasoline Required = 15.16 L
(b)
Given that;
Mileage = 30 mi/gal
Converting it to km/L
Mileage = (30 mi/gal)(1 gal/3.78 L)(1 km/0.6214 mi)
Mileage = 12.77 km/L
Now, the gasoline required for 142 km trip:
Gasoline Required = (Length of trip)/(Mileage)
Gasoline Required = (115 km/day)(7 days/week)/(12.77 km/L)
Gasoline Required = 63 L/week
Now, we find the cost:
Weekly Cost = (Gasoline Required)(Unit Cost)
Weekly Cost = (63 L/week)(1.1 euros/L)
Weekly Cost = 69.34 euros/week = $87.37
since, 1 euro = $1.26
(c)
Average Speed = (Distance Travelled)/(Time Taken)
Average Speed = 200 m/20.9 s
Average Speed = (9.57 m/s)(3600 s/1 h)(1 km/ 1000 m)
Average Speed = 34.45 km/h
(d)
22.7 g piece contains = 7 g dietary fat
(22.7 g)(1 lb/453.592 g) piece contains = (7 g)(1 kg/1000 g) dietary fat
0.05 lb piece contains = 0.007 kg dietary fat
1 lb piece contains = (0.007/0.05) kg dietary fat
4 lb piece contains = 4(0.007/0.05) kg dietary fat
4 lb piece contains = 0.559 kg dietary fat
In a box of 25 external hard disks, there are 2 defectives. An inspector examines 5 of these hard disks. Find the probability that there is at least 1 defective hard disk among the 5.
Answer:
0.3667 or 36.67%
Step-by-step explanation:
The probability of getting at least 1 defective hard disk among the 5 (P(X>0)) is equal to 100% minus the probability of getting none defectives (1-P(X=0)).
If 23 out of 25 hard disks are non-defective, the probability is:
[tex]P(X>0) = 1 -P(X=0)\\P(X>0) = 1 -\frac{23}{25}*\frac{22}{24} *\frac{21}{23} *\frac{20}{22} *\frac{19}{21}\\ P(X>0) = 0.3667=36.67\%[/tex]
The probability that there is at least 1 defective hard disk is 0.3667 or 36.67%.
Write the following in terms of sin θ and cos θ; then simplify if possible. (Leave your answer in terms of sin θ and/or cos θ.) csc θ tan θ.
The expression [tex]Cosec\theta*Tan\theta[/tex] in terms of [tex]Sin\theta[/tex] and [tex]Cos\theta[/tex] in simplified form is [tex]Cosec\theta*Tan\theta = Sin\theta[/tex]
Given expression:
[tex]Cosec\theta*Tan\theta[/tex]
Express [tex]cosec\theta[/tex] and [tex]Tan\theta[/tex] in terms of [tex]Sin\theta[/tex] and [tex]Cos\theta[/tex]
Now,
[tex]Cosec\theta = \dfrac{1}{Sin\theta}[/tex]
[tex]Tan\theta = \dfrac{Sin\theta}{Cos\theta}[/tex]
Substitute the expression of [tex]Cosec\theta[/tex] and [tex]Tan\theta[/tex] in original expression:
[tex]Cosec\theta*Tan\theta = \dfrac{1}{Sin\theta} * \dfrac{Sin\theta}{Cos\theta}[/tex]
[tex]Sin\theta[/tex] is cancel out in the right-hand side of the equation:
[tex]Cos\theta[/tex] can be written as:
[tex]\dfrac{1}{Cos\theta} = \dfrac{1}{\dfrac{1}{Sin\theta} }[/tex]
[tex]= Sin\theta[/tex]
For the given expression:
[tex]Cosec\theta*Tan\theta = Sin\theta[/tex]
The simplified expression is [tex]Cosec\theta*Tan\theta = Sin\theta[/tex]
Learn more about Trigonometric identities here:
https://brainly.com/question/33401109
#SPJ12
The expression csc θ tan θ simplifies to sec θ which further simplifies to [tex]\frac{1}{cos\theta}[/tex].
To express csc θ tan θ in terms of sin θ and cos θ, we start by rewriting each trigonometric function:
csc θ = [tex]\frac{1}{sin\theta}[/tex]tan θ = [tex]\frac{sin\theta}{cos\theta}[/tex]Now, multiplying these together:csc θ tan θ = ([tex]\frac{1}{sin\theta}[/tex]) × ([tex]\frac{sin\theta}{cos\theta}[/tex])The sin θ terms cancel out:csc θ tan θ = [tex]\frac{1}{cos\theta}[/tex]Therefore, the expression simplifies to : [tex]\frac{1}{cos\theta}[/tex]"Use the following information to answer the question. The mean age of lead actresses from the top ten grossing movies of 2010 was 29.6 years with a standard deviation of 6.35 years. Assume the distribution of the actresses' ages is approximately unimodal and symmetric.
In 1993, actress Anna Paquin won an academy award in for the movie ""The Piano."" She was 11-years-old. Finish the statement: ""According to the Empirical Rule, the ages of nearly all lead actresses will be between______________and_____________ years. Anna Paquin was this range when she won the academy award."""
a) 10.6; 48.7; within
b) 23.3: 36.0; within
c) 16.9: 42.3; not within
d) 10.6: 48.7; not within
Answer:
a) 10.6; 48.7; within
Step-by-step explanation:
The Empirical Rule states that, for a normally distributed random variable:
68% of the measures are within 1 standard deviation of the mean.
95% of the measures are within 2 standard deviation of the mean.
99.7% of the measures are within 3 standard deviations of the mean.
In this problem, we have that:
Mean = 29.6
Standard deviation = 6.35
"According to the Empirical Rule, the ages of nearly all lead actresses will be between______________and_____________ years.
Nearly all(99.7%) will be within 3 standard deviations from the mean.
So from 29.6 - 3*6.35 = 10.6 years to 29.6 + 3*6.35 = 48.7 years.
Anna was 11-years old, so she was within this range.
So the correct answer is
a) 10.6; 48.7; within
The ages of nearly all lead actresses will be between 16.9 and 42.3 years according to the Empirical Rule. Anna Paquin's age falls within this range when she won the academy award.
Explanation:According to the Empirical Rule, for a normal distribution, approximately 68% of the data falls within one standard deviation of the mean, approximately 95% falls within two standard deviations, and approximately 99.7% falls within three standard deviations. Since the mean age is 29.6 years and the standard deviation is 6.35 years, we can calculate the range as follows:
One standard deviation: 29.6 ± 6.35 = 23.25 to 35.95
Two standard deviations: 29.6 ± (2 × 6.35) = 16.9 to 42.3
Three standard deviations: 29.6 ± (3 × 6.35) = 10.55 to 48.65
Since Anna Paquin was 11 years old when she won the academy award, her age falls within the range of two standard deviations, which is 16.9 to 42.3 years. Therefore, the correct answer is option c) 16.9: 42.3; not within.
Learn more about The Empirical Rule here:https://brainly.com/question/33068610
#SPJ3
In San Jose a sample of 73 mail carriers showed that 30 had been bitten by an animal during one week. In San Francisco in a sample of 80 mail carriers, 56 had received animal bites. Is there a significant difference in the proportions? Use a 0.05. Find the 95% confidence interval for the difference of the two proportions. Sellect all correct statements below based on the data given in this problem.1. -.4401 ≤ p1 - p2 ≤ -.13802. -.4401 ≤ p1 - p2 ≤ .13803. The rate of mail carriers being bitten in San Jose is statistically greater than the rate San Francisco at α = 5%4. The rate of mail carriers being bitten in San Jose is statistically less than the rate San Francisco at α = 5%5. The rate of mail carriers being bitten in San Jose and San Francisco are statistically equal at α = 5%
Answer:
[tex](0.411-0.7) - 1.96 \sqrt{\frac{0.411(1-0.411)}{73} +\frac{0.7(1-0.7)}{80}}=-0.4401[/tex]
[tex](0.411-0.7) + 1.96 \sqrt{\frac{0.411(1-0.411)}{73} +\frac{0.7(1-0.7)}{80}}=-0.1380[/tex]
We are confident at 95% that the difference between the two proportions is between [tex]-0.4401 \leq p_B -p_A \leq -0.1380[/tex]
1. -.4401 ≤ p1 - p2 ≤ -.1380
4. The rate of mail carriers being bitten in San Jose is statistically less than the rate San Francisco at α = 5%
Step-by-step explanation:
In San Jose a sample of 73 mail carriers showed that 30 had been bitten by an animal during one week. In San Francisco in a sample of 80 mail carriers, 56 had received animal bites. Is there a significant difference in the proportions? Use a 0.05. Find the 95% confidence interval for the difference of the two proportions. Sellect all correct statements below based on the data given in this problem.
1. -.4401 ≤ p1 - p2 ≤ -.1380
2. -.4401 ≤ p1 - p2 ≤ .1380
3. The rate of mail carriers being bitten in San Jose is statistically greater than the rate San Francisco at α = 5%
4. The rate of mail carriers being bitten in San Jose is statistically less than the rate San Francisco at α = 5%
5. The rate of mail carriers being bitten in San Jose and San Francisco are statistically equal at α = 5%
Solution to the problem
A confidence interval is "a range of values that’s likely to include a population value with a certain degree of confidence. It is often expressed a % whereby a population means lies between an upper and lower interval".
The margin of error is the range of values below and above the sample statistic in a confidence interval.
Normal distribution, is a "probability distribution that is symmetric about the mean, showing that data near the mean are more frequent in occurrence than data far from the mean".
[tex]p_1[/tex] represent the real population proportion for San Jose
[tex]\hat p_1 =\frac{30}{73}=0.411[/tex] represent the estimated proportion for San Jos
[tex]n_1=73[/tex] is the sample size required for San Jose
[tex]p_2[/tex] represent the real population proportion for San Francisco
[tex]\hat p_2 =\frac{56}{80}=0.7[/tex] represent the estimated proportion for San Francisco
[tex]n_2=80[/tex] is the sample size required for San Francisco
[tex]z[/tex] represent the critical value for the margin of error
The population proportion have the following distribution
[tex]p \sim N(p,\sqrt{\frac{p(1-p)}{n}})[/tex]
The confidence interval for the difference of two proportions would be given by this formula
[tex](\hat p_1 -\hat p_1) \pm z_{\alpha/2} \sqrt{\frac{\hat p_1(1-\hat p_1)}{n_1} +\frac{\hat p_2 (1-\hat p_2)}{n_2}}[/tex]
For the 95% confidence interval the value of [tex]\alpha=1-0.95=0.05[/tex] and [tex]\alpha/2=0.025[/tex], with that value we can find the quantile required for the interval in the normal standard distribution.
[tex]z_{\alpha/2}=1.96[/tex]
And replacing into the confidence interval formula we got:
[tex](0.411-0.7) - 1.96 \sqrt{\frac{0.411(1-0.411)}{73} +\frac{0.7(1-0.7)}{80}}=-0.4401[/tex]
[tex](0.411-0.7) + 1.96 \sqrt{\frac{0.411(1-0.411)}{73} +\frac{0.7(1-0.7)}{80}}=-0.1380[/tex]
We are confident at 95% that the difference between the two proportions is between [tex]-0.4401 \leq p_B -p_A \leq -0.1380[/tex]
Since the confidence interval contains all negative values we can conclude that the proportion for San Jose is significantly lower than the proportion for San Francisco at 5% level.
Based on this the correct options are:
1. -.4401 ≤ p1 - p2 ≤ -.1380
4. The rate of mail carriers being bitten in San Jose is statistically less than the rate San Francisco at α = 5%
A model for the basal metabolism rate, in kcal/h, of a young man is given by the formula below, where t is the time in hours measured from 5:00 AM. What is the total basal metabolism of this man over a 24 hour period?R(t)=80-0.18cos πt/1224∫ R(t) dt=____?0
Answer:
1920 k calories is the basal metabolism.
Step-by-step explanation:
Formula to get the total basal metabolism has been given by the formula
R(t) = [tex]80-0.18cos\frac{\pi t}{12}[/tex]
Where t = time
Now to calculate the total basal metabolism we will integrate the function with respect to time from 0 to 24 hours.
[tex]\int_{0}^{24}R(t)=\int_{0}^{24}(80-0.18cos\frac{\pi t}{12})dt[/tex]
= [tex][80t-{0.18}\times \frac{sin\frac{\pi t}{12}}{\frac{\pi}{12}}]_{0}^{24}[/tex]
= [tex][(80-0)24-\frac{0.18\times 12}{\pi}(sin2\pi - sin0)][/tex]
= [(80-0)24-(sin2\pi - sin0)]
= 80×24
= 1920 k calories
Therefore, 1920 k calories is the total basal metabolism of the young man.
What is the equation of the line perpendicular to 2x - 3y = 13 that passes through the point (-6, 5)?
Final answer:
To find the equation of a line perpendicular to 2x - 3y = 13 and passing through (-6, 5), first find the slope of the given line, then its negative reciprocal for the perpendicular line, and finally apply the point-slope formula with the new slope and given point.
Explanation:
To find the equation of a line perpendicular to 2x - 3y = 13 that passes through the point (-6, 5), follow these steps:
Rewrite the given equation in slope-intercept form (y = mx + b) to find its slope.
Calculate the slope of the perpendicular line using the negative reciprocal of the given line's slope.
Use the point-slope formula with the slope from step 2 and the given point to find the equation of the perpendicular line.
Rewriting the given equation: 2x - 3y = 13 → -3y = -2x + 13 → y = (2/3)x - 13/3. The slope (m1) is 2/3. The slope of the perpendicular line (m2) is -3/2 (the negative reciprocal of m1). Using the point-slope formula with the perpendicular slope and the point (-6, 5), we get: y - 5 = (-3/2)(x + 6), which simplifies to y = (-3/2)x - 4. This is the equation of the line perpendicular to 2x - 3y = 13 that passes through (-6, 5).
Solve the following differential equations using classical methods. x¨ + 6 ˙x + 8x = 5sin(3t) x¨ + 4 ˙x = t2 ; x(0) = 1; ˙x = 2
Answer:
1. x = (199/130)e^(-2t) - (33/65)e^(-4t) - (18/65)cos3t - (1/65)sin3t
2. x = (191/128) - (63/128)e^(-4t) + (t³/12) - (t²/16) + (t/32)
Step-by-step explanation:
Steps are shown in the attachment.
if a pound of almonds costs $8, how many ounces can be bought for $4.60?
The number of ounces that can be bought for $4.60 will be 9.2 ounces.
What is Algebra?The analysis of mathematical representations is algebra, and the handling of those symbols is logic.
Conversion means to convert the same thing into different units.
If a pound of almonds costs $8.
We know that in one pound, there are 16 ounces. Then the cost of each ounce will be
⇒ 8 / 16
⇒ $0.5 per ounce
Then the number of ounces that can be bought for $4.60 will be
⇒ 4.6 / 0.5
⇒ 9.2 ounces
The number of ounces that can be bought for $4.60 will be 9.2 ounces.
More about the Algebra link is given below.
https://brainly.com/question/953809
#SPJ2
Assume there is a linear relationship between the curb weight of a car (in thousands of kilograms) and its combined mileage (in miles per gallon). The Hummer H2 has a weight of 3 thousand kg and mileage of 9 mpg, while a Ford Taurus sedan weighs 1.9 thousand kg and gets 21 mpg. What is the mileage of a Chevy Cavalier weighing 1.1 thousand kg?
Answer: The mileage of a Chevy Cavalier weighing 1.1 thousand kg is 29.72 mpg.
Step-by-step explanation:
if there is a linear relationship between two variables x and y , then we represent this relation in the form of equation as :[tex]y= mx+c[/tex] (*)
, where m = rate of change of y with respect to x
c= Constant or the value of y when x=0.
We assume there is a linear relationship between the curb weight of a car (in thousands of kilograms) and its combined mileage (in miles per gallon).
Let y= combined mileage (in miles per gallon)
x= curb weight of a car (in thousands of kilograms)
When x= 3 thousand kg , y = 9 mpg
⇒ [tex]9= m(3)+c[/tex] [Put values in (*)]
⇒ [tex]9= 3m+c--------(1)[/tex]
When x= 1.9 thousand kg , y = 21 mpg
⇒ [tex]21= m(1.9)+c[/tex] [Put values in (*)]
⇒ [tex]21= 1.9m+c--------(2)[/tex]
Eliminate the equation (1) from (2) , we get
[tex]1.9m-3m=21-9[/tex]
[tex]-1.1m=12\\\Rightarrow\ m=\dfrac{12}{-1.1}=\dfrac{-120}{11}[/tex]
Put value of m in (1) , we gte
[tex]9= 3(\dfrac{-120}{11})+c[/tex]
[tex]9= \dfrac{-360}{11}+c\\\Rightarrow\ c=9+\dfrac{360}{11}=\dfrac{459}{11}[/tex]
Substitute the value of m and c in (*) , we get
[tex]y= \dfrac{-120}{11}x+\dfrac{459}{11}[/tex]
When x= 1.1
[tex]y= \dfrac{-120}{11}(1.1)+\dfrac{459}{11}[/tex]
[tex]y= \dfrac{-120}{11}(\dfrac{11}{10})+\dfrac{459}{11}[/tex]
[tex]y=-12+\dfrac{459}{11}=\dfrac{327}{11}\approx29.72[/tex]
Hence, the mileage of a Chevy Cavalier weighing 1.1 thousand kg is 29.72 mpg.
High demand cars that are also in low supply tend to retain their value better than other cars. The data in the table is for a car that won a resale value award
The student's question relates to analyzing trends in car safety award data and understanding supply curve dynamics in the context of business or economics at the college level. It requires statistical analysis and economic reasoning.
Explanation:The student's question involves analyzing data to determine if there has been a change in the distribution of cars that earned top safety picks between the years 2009 and 2013. This question lies within the field of Business or specifically within the area of business statistics, focusing on the analysis of trends over time.
Furthermore, considering the supply of cars and how it changes with price is another key aspect of this question. Using the supplied figures and tables, which is common in business studies, the student is asked to interpret how the quantity supplied of cars changes as the price increases from $20,000 to $22,000—a concept known in economics as the law of supply.
In summary, the question requires the application of statistical analysis to evaluate changes in car safety awards over time and the understanding of basic supply curve dynamics.
Your complete question is: High demand cars that are also in low supply tend to retain their value better than other cars. The data in the table below is for a car that won a resale value award. a. Write a function to represent the change in the percentage of the car's value over time. Suppose that the function is linear for the first 5 years. b. Based on your model, by what percent did the car's value drop the day it was bought and driven off the lot? c. Do you think the linear model would still be useful after 10 years? Why or why not? d. Assume you used months instead of years to write a function. How would your model change?
Determine if the statement is true or false. Any linear system with more variables than equations cannot have a unique solution. True False
Answer:
True
Step-by-step explanation:
A linear system of equations will have a unique solution if and only if the number of variables equal the number of independent equations.
By independent equations we mean the same equation not repeated by multiplying by any constant.
Suppose number of variables are n, we must have the determinant formed by the coefficients non zero to have a unique solutions.
Here the no of equations are less than the number of variables. So we cannot have a unique solution but can have a parametric solution using the number of parameters as n-m where n = number of variables and m = the number of independent equations given.
So the given statement is true.
Finding the average rate of change of g(z) =4x^2_5 between the points( -2,11) and (2,11
Answer:
The average rate of change of g(z) =4x^2_5 between the points( -2,11) and (2,11) is 0.
Step-by-step explanation:
Given a function y, the average rate of change S of [tex]y=g(z)[/tex] in an interval [tex](z_{s}, z_{f})[/tex] will be given by the following equation:
[tex]S = \frac{g(z_{f}) - g(z_{s})}{z_{f} - z_{s}}[/tex]
In this problem, we have that:
[tex]g(z) = 4z^{2} - 5[/tex]
Between the points( -2,11) and (2,11).
So [tex]z_{f} = 2, z_{s} = -2[/tex]
[tex]g(z_{f}) = g(2) = 4*(2)^{2} - 5 = 11[/tex]
[tex]g(z_{s}) = g(-2) = 4*(-2)^{2} - 5 = 11[/tex]
So
[tex]S = \frac{g(z_{f}) - g(z_{s})}{z_{f} - z_{s}} = \frac{11 - 11}{2 - (-2)} = \frac{0}{4} = 0[/tex]
The average rate of change of g(z) =4x^2_5 between the points( -2,11) and (2,11) is 0.
You draw two cards from a standard deck of 52 cards and do not replace the first one before drawing the second. Find the probability of drawing a 7 for the first card and a king for the second card. Round your answer to the nearest thousandth.
Final answer:
The probability of drawing a 7 followed by a king from a standard 52-card deck without replacing the first card is 4/663, which rounds to approximately 0.006 when rounded to the nearest thousandth.
Explanation:
The student is asking to find the probability of drawing a 7 for the first card and a king for the second card from a standard 52-card deck, without replacing the first card. To solve this, we need to calculate the probability of each event occurring consecutively.
First, the probability of drawing a 7 from a deck of 52 cards is 4/52 or 1/13, because there are 4 sevens in the deck. After drawing a seven, there are now 51 cards left in the deck. Next, the probability of drawing a king from the remaining 51 cards is 4/51, since there are still 4 kings in the deck.
To find the combined probability of both events happening, we multiply these probabilities together:
Probability of drawing a 7 and then a king = (1/13) × (4/51)
Which simplifies to:
Probability = 4/663
Rounded to the nearest thousandth, the probability is approximately 0.006.
The following sample data represent the gasoline mileages (in miles per gallon) determined for cars in a particular weight class:
25.1 29.0 34.5 35.7 37.9 34.9 24.3 26.6 27.3 32.0 30.0 34.5 35.3 33.5 36.6 34.8 16.2 13.1 24.5 33.6 28.0 33.9 30.7 32.0 37.7 21.1 31.2 35.6 34.4 25.2 35.9 18.3 29.4 29.5 34.8 29.4 26.4 38.8 36.0 28.7 23.4 35.3 33.7 38.1 28.6 34.2 34.8 39.2 39.9 36.8
1. Using 10 mpg as the lower limit of the first class interval, construct a histogram with intervals of width 5 mpg. What is the midpoint of the cell with the largest number of observations (the mode).
2. Is the histogram skewed to the left or right or symmetric?
Answer:
1) Explanation and figure attached below.
2) For this case we see that most of the values are on the right part of the distribution so then we can conclude that the distribution is skewed to the left. The mean seems to be < Median< Mode for this case.
Step-by-step explanation:
Part 1
If we order the data from the smallest to the largest we got:
13.1 , 16.2 ,18.3 , 21.1 , 23.4 , 24.3 , 24.5
25.1 , 25.2 , 26.4 , 26.6 ,27.3 ,28 , 28.6 ,
28.7 , 29 , 29.4 , 29.4 , 29.5 , 30 , 30.7
31.2 , 32 , 32 , 33.5 , 33.6 , 33.7 , 33.9
34.2 , 34.4 , 34.5 , 34.5 , 34.8 , 34.8
34.8 , 34.9 , 35.3 , 35.3 , 35.6 , 35.7
35.9 , 36 , 36.6 , 36.8 , 37.7 , 37.9
38.1 , 38.8 , 39.2 , 39.9
For this case if we use 10 mpg as the lower limit and with a width of 5 mpg for the intervals we have the following table:
Interval Frequency Midpoint
[10-15) 1 12.5
[15-20) 2 17.5
[20,25) 4 22.5
[25-30) 12 27.5
[30-35) 17 32.5
[35-40) 14 37.5
Total 50
So the histogram is on the figure attached. The midpoint for the class interval with the largest number of observations is 32.5.
Part 2
For this case we see that most of the values are on the right part of the distribution so then we can conclude that the distribution is skewed to the left. The mean seems to be < Median< Mode for this case.
Final answer:
To construct the histogram, determine the class intervals and count the number of observations in each interval. The midpoint of the cell with the largest number of observations is approximately 37.45 mpg.
Explanation:
To construct a histogram with intervals of width 5 mpg, we start by determining the class intervals. Given that the lower limit of the first interval is 10 mpg, the class intervals can be calculated as follows: 10-14.9, 15-19.9, 20-24.9, 25-29.9, 30-34.9, 35-39.9. Next, we count the number of observations falling into each interval:
10-14.9: 3
15-19.9: 6
20-24.9: 5
25-29.9: 7
30-34.9: 9
35-39.9: 10
The cell with the largest number of observations is the one corresponding to the interval 35-39.9 mpg. To calculate the midpoint of this interval, we take the average of the lower and upper limits: (35 + 39.9) / 2 = 37.45. Therefore, the midpoint of the cell with the largest number of observations (the mode) is approximately 37.45 mpg.
Ann and Bill play rock-paper-scissors. Each has a strategy of choosing uniformly at random out of rock, paper, and scissors every round (making independent selections each round). Each round can end in a win, loss, or a tie for each player.
a. What is the probability Ann wins the first round. (Remember that a tie is a possibility)
Prob=
b. What is the probability that Ann's first win happens in round #5?
Prob=
C. What is the probability that Ann's first win comes after round #5?
Prob=
Answer:
a) 1/3
b) 0.0658436214
Step-by-step explanation:
Part a
Ann wins first round = (P , R) + (S , P) + (R , S) = 3 possibilities of win
Total outcomes = Wins + Losses + Ties = 9 possibilities
Hence,
P (Ann wins first round) = 3/9 = 1/3
Part b
Ann losses or ties first 4 rounds and wins 5th round
P(Ann loosing or tie in any round) = 6/9 = 2/3
Hence,
P(Ann wins 5th round only) = (2/3)^4 * (1/3) = 0.0658436214
Part c
Final answer:
In rock-paper-scissors, Ann has a 1/3 probability of winning the first round. The probability of Ann's first win in round #5 is (2/3)^4 × (1/3), and the probability of Ann's first win coming after round #5 is 1 - (2/3)^5.
Explanation:
To answer these questions, we will calculate the probabilities based on the uniform random choices made by Ann and Bill in the game of rock-paper-scissors.
Probability Ann wins the first round: Each player has 3 choices, resulting in 9 possible outcomes. There are 3 ways Ann can win (rock beats scissors, paper beats rock, scissors beats paper), so the probability is 3/9 or 1/3.
Probability Ann's first win happens in round #5: We need 4 consecutive non-wins (losses or ties) and a win in the 5th round. The probability of a non-win per round is 2/3, making the probability of four non-wins (2/3)^4. The probability Ann wins the 5th round is 1/3. Therefore, the probability of this scenario is (2/3)^4 × (1/3).
Probability that Ann's first win comes after round #5: This is the probability of Ann not winning in the first 5 rounds. As each round is independent, we raise the non-winning probability to the power of 5, (2/3)^5, and subtract from 1 to get the desired probability.
Numerical WebAssign will do simple calculations for you, using +, -, *, /, parentheses, and e-notation. For example, if a question asks for half the sum of 246 and 388, you can enter "(246+388)/2". For more complicated calculations you'll need to use a calculator and then enter your result. What is the product of 140 and 80?
Answer:
140·80=11200
Step-by-step explanation:
From exercise we have example for how we find half the sum of 246 and 388, we can enter "(246+388)/2".
Based on this example, we will calculate what is required in the task using a calculator. So we use a calculator to find the product of the following numbers, 140 and 80.
We calculate, and we get
140·80=11200
Find the unit tangent vector T(t) at the point with the given value of the parameter t. r(t)
Answer:
Since the equation was missing, I solved it with another equation and got an answer of T(0) = <3j / 5 + 4k / 5>.
Please see my explanation. I hope this helps
Step-by-step explanation:
The question asked us to find out unit tangent vector.
Recall unit vector = vector / magnitude of vector
Since the question is missing with an equation. I suppose an equation.
r(t)=Cost i, 3t j, 2Sin(2t) k at t=0
Lets take out differentiation
r'(t) = <(-Sint), 3, 2(Cos(2t)(2))>
r'(t)= <-Sint, 3, 4Cos(2t)>
Now substitute t=0 in the differentiate found above.
r'(0)= <-Sin(0), 3, 4Cos(2*0)>
r'(0)= <0, 3, 4(1)>
r'(0)= <0,3,4>
vector r'(0)=<0i, 3j, 4k>
Now lets find out magnitude of vector
|r'(0)| = [tex]\sqrt{0^{2}+3^{2}+4^{2} }[/tex]
|r'(0)| = [tex]\sqrt{0+9+16}[/tex]
|r'(0)| = [tex]\sqrt{25}[/tex]
|r'(0)| = 5
Unit Tangent Vector
T(0) = <0, 3, 4> / 5
T(0) = <3j / 5 + 4K / 5>
To find the unit tangent vector, we first need to find the velocity vector. Given that the position vector is r(t) = Acos(wt)i + Asin(wt)j, we can find the derivative of this vector to get the velocity vector. To find the unit tangent vector, we divide the velocity vector by its magnitude.
Explanation:To find the unit tangent vector, we first need to find the velocity vector. Given that the position vector is r(t) = Acos(wt)i + Asin(wt)j, we can find the derivative of this vector to get the velocity vector:
v(t) = -Aw*sin(wt)i + Aw*cos(wt)j
To find the unit tangent vector, we divide the velocity vector by its magnitude:
T(t) = (v(t))/(|v(t)|) = (-Aw*sin(wt)i + Aw*cos(wt)j)/(sqrt((Aw*sin(wt))^2 + (Aw*cos(wt))^2))
So, the unit tangent vector at any point is T(t).
Consider the matrix A =(1 1 1 3 4 3 3 3 4) Find the determinant |A| and the inverse matrix A^-1.
Answer:
[tex]A)\,\,det(A)=1[/tex]
[tex]B)\,\,A^{-1}=\left[\begin{array}{ccc}7&-1&-1\\-3&1&0\\-3&0&1\end{array}\right] [/tex]
Step-by-step explanation:
[tex]det(A) = \left\Bigg|\begin{array}{ccc}1&1&1\\3&4&3\\3&3&4\end{array}\right\Bigg|[/tex]
Expanding with first row
[tex]det(A) = \left\Bigg|\begin{array}{ccc}1&1&1\\3&4&3\\3&3&4\end{array}\right\Bigg|\\\\\\det(A)= (1)\left\Big|\begin{array}{cc}4&3\\3&4\end{array}\right\Big|-(1)\left\Big|\begin{array}{cc}3&3\\3&4\end{array}\right\Big|+(1)\left\Big|\begin{array}{cc}3&4\\3&3\end{array}\right\Big|\\\\det(A)=1[16-9]-1[12-9]+1[9-12]\\\\det(A)=7-3-3\\\\det(A)=1[/tex]
To find inverse we first find cofactor matrix
[tex]C_{1,1}=(-1)^{1+1}\left\Big|\begin{array}{cc}4&3\\3&4\end{array}\right\Big|=7\\\\C_{1,2}=(-1)^{1+2}\left\Big|\begin{array}{cc}3&3\\3&4\end{array}\right\Big|=-3\\\\C_{1,3}=(-1)^{1+3}\left\Big|\begin{array}{cc}3&4\\3&3\end{array}\right\Big|=-3\\\\C_{2,1}=(-1)^{2+1}\left\Big|\begin{array}{cc}1&1\\3&4\end{array}\right\Big|=-1\\\\C_{2,2}=(-1)^{2+2}\left\Big|\begin{array}{cc}1&1\\3&4\end{array}\right\Big|=1\\\\C_{2,3}=(-1)^{2+3}\left\Big|\begin{array}{cc}1&1\\3&3\end{array}\right\Big|=0\\\\[/tex]
[tex]C_{3,1}=(-1)^{3+1}\left\Big|\begin{array}{cc}1&1\\4&3\end{array}\right\Big|=-1\\\\C_{3,2}=(-1)^{3+2}\left\Big|\begin{array}{cc}1&1\\3&3\end{array}\right\Big|=0\\\\\\C_{3,3}=(-1)^{3+3}\left\Big|\begin{array}{cc}1&1\\3&4\end{array}\right\Big|=1\\\\[/tex]
Cofactor matrix is
[tex]C=\left[\begin{array}{ccc}7&-3&3\\-1&1&0\\-1&0&1\end{array}\right] \\\\Adj(A)=C^{T}\\\\Adj(A)=\left[\begin{array}{ccc}7&-1&-1\\-3&1&0\\-3&0&1\end{array}\right] \\\\\\A^{-1}=\frac{adj(A)}{det(A)}\\\\A^{-1}=\frac{\left[\begin{array}{ccc}7&-1&-1\\-3&1&0\\-3&0&1\end{array}\right] }{1}\\\\A^{-1}=\left[\begin{array}{ccc}7&-1&-1\\-3&1&0\\-3&0&1\end{array}\right][/tex]
Determine if the statement is true or false. If a linear system has the same number of equations and variables, then it must have a unique solution. True False Justify your answer.
Answer:
False
Step-by-step explanation:
Consider the equations with the same number of equations and variables as shown below,
Case 1
[tex]x_{1} + x_{2} = 0\\x_{1} + x_{2} = 1[/tex]
This equation has no solution because it is not possible to have two numbers that give a sum of 0 and 1 simultaneously.
Case 2
[tex]x_{1} + x_{2} = 1\\2x_{1} + 2x_{2} = 2[/tex]
This equation has infinitely many possible solutions.
Therefore it is FALSE to say a linear system with the same number of equations and variables, must have a unique solution.
The statement that a linear system with the same number of equations and variables must have a unique solution is false. Other considerations, such as whether the system is consistent or inconsistent and dependent or independent, can impact the amount of solutions a system has.
Explanation:The statement is false. Even if a linear system has the same number of equations and variables, it does not necessarily mean that it will have a unique solution. Rather, whether a system has a unique solution, no solutions, or infinitely many solutions depends on whether the system is consistent or inconsistent and dependent or independent.
For instance, consider two linear equations: x + y = 5 and 2x + 2y = 10. Even though these two equations have the same number of variables and equations, they represent the same line and thus have infinitely many solutions. Similarly, consider the system x + y = 5 and x + y = 6. These two equations have also the same number of equations and variables but they are parallel lines and do not intersect, so this system does not have any solution.
So, the number of variables and equations is not always enough to determine the number of solutions to a linear system.
Learn more about Linear System here:https://brainly.com/question/36898231
#SPJ3
Use the given degree of confidence and sample data to construct a confidence interval for the population proportion p. n = 87, x = 26; 98 percent (0.185, 0.413) (0.202, 0.396) (0.184, 0.414) (0.203, 0.395)
Answer:
(0.185, 0.413)
Step-by-step explanation:
In a sample with a number n of people surveyed with a probability of a success of [tex]\pi[/tex], and a confidence interval [tex]1-\alpha[/tex], we have the following confidence interval of proportions.
[tex]\pi \pm z\sqrt{\frac{\pi(1-\pi)}{n}}[/tex]
In which
Z is the zscore that has a pvalue of [tex]1 - \frac{\alpha}{2}[/tex].
For this problem, we have that:
[tex]n = 87, x = 26, p = \frac{x}{n} = \frac{26}{87} = 0.2989[/tex]
98% confidence interval
So [tex]\alpha = 0.02[/tex], z is the value of Z that has a pvalue of [tex]1 - \frac{0.02}{2} = 0.99[/tex], so [tex]Z = 2.325[/tex].
The lower limit of this interval is:
[tex]\pi - z\sqrt{\frac{\pi(1-\pi)}{n}} = 0.2989 - 2.325\sqrt{\frac{0.2989*0.7011}{87}} = 0.185[/tex]
The upper limit of this interval is:
[tex]\pi + z\sqrt{\frac{\pi(1-\pi)}{n}} = 0.2989 + 2.325\sqrt{\frac{0.2989*0.7011}{87}} = 0.413[/tex]
So the correct answer is:
(0.185, 0.413)