A chemical reaction is considered spontaneous if A) the reaction releases heat, and B) if the entropy of the system increases. There is a formula known as the Gibbs Free Energy equation that predicts whether or not a reaction will be spontaneous; this formula considers the enthalpy side (heat) and the entropy side (disorder) of the reaction when making the prediction.
Hope this helps!
A reaction is spontaneous if it can occur without external input, determined by the changes in enthalpy and entropy of the system. This is calculated using the Gibbs free energy equation. An example is the combustion of gasoline.
Explanation:A reaction is considered spontaneous if it can proceed without any outside intervention. This is determined by two key factors: change in enthalpy (∆H) and change in entropy (∆S). The Gibbs free energy change (ΔG) equation, ΔG = ΔH - TΔS, is used to determine spontaneity. For a reaction to be spontaneous, ΔG has to be negative (exergonic reaction).
For instance, the combustion of gasoline is an example of a spontaneous reaction. When gasoline is ignited, it combusts (reacts with oxygen) to create water and carbon dioxide, releasing heat and expanding gases, driving your car forward. This reaction is spontaneous because it releases energy (∆H is negative) and the products are more disordered than the reactants (∆S is positive), making ∆G negative.
Learn more about Reaction Spontaneity here:https://brainly.com/question/31199175
#SPJ3
Can someone explain this to me?
Other than to say that I see why you are having trouble, I think you could use either.
Having said that, the blue is far more pronounced going from 7 to 9. Seven is more of a dirty blue at 7. It is sky blue at 9. I would pick that.
When you look up it's pH it is given as 7.6 which is about as slightly basic as you can get. At that point it starts to turn blue.
Methyl Red is really weird stuff.
It is red under pH = 4.4 which definitely acidic and yellow above 6.2. It is orange in between.
I would still go with Bromothymol blue, but I'm betting that either could be used.
I hope this is a discussion question, because if you want my honest opinion, it's too close to call.
Answer:
Bromthymol Blue
Step-by-step explanation:
You want to choose an indicator that changes colour at the right pH.
In this case, let's say slightly basic means pH ≈ 8.
Methyl Red
From the pictures, it looks like pH 6 and pH 8 would have similar colours, and it would be difficult to distinguish them. The solution could be slightly acidic or slightly basic.
Bromthymol Blue
A solution with pH 8 would have a definite blue-green colour, which indicates that the solution is basic with no ambiguity.
I vote for Bromthymol Blue.
Explain why groups 14 and 15 are better representatives of mixed groups than groups 13 and 16
Groups 14 and 15 each contain metals, nonmetals, and metalloids while Group 13 contains metals and a metalloid, and Group 16 contains metalloids and nonmetals.
Explanation;Groups 13–16 of the periodic table contain one or more metalloids, in addition to metals, nonmetals, or both.Unlike other groups of the periodic table, which contain elements in one class, groups 13–16 referred to as mixed groups contain elements in at least two different classes. In addition to metalloids, they also contain metals, nonmetals, or both.Group 14 also known as the carbon group contains carbon which is a non metal, silicon and germanium which are metalloids and tin and lead which are metals.Group 15 also known as the Nitrogen group contains non metals such as oxygen, metalloid tellurium and a metal polonium.Groups 14 and 15 should comprise of metals, nonmetals, and metalloids while on the other hand Group 13 comprise metals and a metalloid, and Group 16 comprise metalloids and nonmetals.
Why group 14 and 15 are better than groups 13 and 16?Groups 13–16 of the periodic table comprise of one or more metalloids. It refers to the mixed groups comprise of elements in at minimum two different classes. Group 14 also called as the carbon group comprise carbon which is a nonmetal, silicon, and germanium. Group 15 also called as the Nitrogen group comprise non metals like oxygen.
Learn more about group here: https://brainly.com/question/25262015
Which of the following explains the increase in reaction rate caused by raising the temperature or raising the pressure of a system?
a) surface area theory
b) activation energy theory
c) potential energy theory
d) collision theory
The increase in reaction rate caused by raising the temperature or pressure is explained by collision theory, which states that reactions occur due to collisions with enough energy and proper orientation. Higher temperatures mean more energetic collisions, and increasing pressure leads to a higher frequency of collisions, both contributing to a faster reaction rate.
Explanation:The increase in reaction rate due to raising the temperature or raising the pressure of a system can be explained by d) collision theory. Collision theory posits that chemical reactions occur when reactants collide with sufficient energy and correct orientation. An increase in temperature leads to a greater number of collisions because particles move faster and have more energy, which can be converted into activation energy in a collision. Furthermore, the collisions are more forceful, making it more likely for the reactants to overcome the activation energy barrier and form products, hence increasing the rate of reaction.
Similarly, increasing the pressure in a system typically means more particles are forced into a smaller volume, thus increasing the frequency of collisions. This is especially true for reactions involving gases, where an increase in pressure often corresponds to an increase in concentration, further facilitating more frequent collisions and potentially a faster reaction rate.
How do you do this problem?
C: incorrect. It caught you. There is only 1 molecule of C6H12O6 that you are given. That means there are 24 atoms in all for that glucose. Don't worry. I got caught as well. I was about to write a note saying that it should be the answer. It shouldn't.
A: has three atoms per molecule. There are 6.02 * 10^23 molecules - an incredibly large number which becomes 3 times its size when you ask about this in moles. Still A, large as it is , is not the answer.
B: H2O2 has 4 atoms per molecule. 4 mols have 4 * 6.02*10^23 atoms in a mol of H2O2. Read this sentence and A very carefully. There is 1 mol of CO2 which equals 3 * 6.02*10^23 atoms in 1 mol of CO2 which has 6.02 * 10^23 molecules per mole. Be sure you understand the difference.
B is the answer.
D and E are parts of a mol. They are bigger than C (much) but much smaller than A or B.
The molecular weight has nothing to do with your answer. Please read B and A until you understand them.
A chemical reaction release 55.2 kcal. How many kilojoules does this correspond to?
Answer:
231.0 kJ
Explanation:
Chemical reactions releasing heat energy are exothermic reactions.
The chemical reaction released 55.2 kcal
1 kcal is equivalent to 4.184 kJ
Therefore 55.2 kcal is equivalent to - 4.184 kJ/kcal x 55.2 kcal
the energy in kJ is - 231.0 kJ
Solar power would be most successful as an energy source in
a. Southern California and Australia.
b. Nova Scotia.
c. Wisconsin, Iowa, Minnesota and Ohio.
d. the Pacific Northwest.
Answer:
The correct answer is: a. Southern California and Australia.
Explanation:
The solar power, in order to be more efficient and more productive, needs to be produced in places that have a lot of sunny days throughout the year. So the wisest and most practical thing to do is to install solar panels at places that are warm and sunny for most of the year. The southern part of California and most of Australia would be excellent choices for something like this. Both places have predominantly warm weather throughout the year, and more important, they have a lot of sunny days throughout the year. That provides the perfect conditions for harvesting the solar energy and use it as an energy source.
Answer:
a
Explanation:
Predict the ground-state electron configuration of the following ions. Write your answers in abbreviated form, that is, beginning with a noble gas in brackets.a). Cr2+b.)Cu2+c.)Co3+
These are three questions and three complete answers
Answer:
a) Cr²⁺: [Ar] 4s² 3d²
b) Cu²⁺: [Ar] 4s² 3d⁷
c) Co³⁺: [Ar] 4s² 3d⁴
Explanation:
a) Cr²⁺
Z = 24Number of protons: 24Number of elecrons of the neutral atom: 24Charge of the ions: + 2Number of electrons of the ion: 24 - charge = 24 - 2 = 22.Electron configuration:Fill the orbitals in increasing order of energy. Using Aufbau's rules the order is: 1s² 2s² 2p⁶ 3s² 3p⁶ 4s² 3d¹⁰ 4p⁶ .....
Hence, for 22 electrons you get:
1s² 2s² 2p⁶ 3s² 3p⁶ 4s² 3d²
Abbreviated notation: since the last complete level is the number 3s² 3p⁶, you use the noble gas of the period 3, which is Ar, and the configuration is:
[Ar] 4s² 3d²
b) Cu²⁺
Z = 29Number of protons: 29Number of elecrons of the neutral atom: 29Charge of the ion: + 2Number of electrons of the ion: 29 - charge = 29 - 2 = 27.Electron configuration:Fill the orbitals in increasing order of energy. Using Aufbau's rules the order is: 1s² 2s² 2p⁶ 3s² 3p⁶ 4s² 3d¹⁰ 4p⁶ .....
Hence, for 27 electrons you get:
1s² 2s² 2p⁶ 3s² 3p⁶ 4s² 3d⁷
Abbreviated notation: since the last complete level is the number 3s² 3p⁶, you use the noble gas of the period 3, which is Ar, and the configuration is:
[Ar] 4s² 3d⁷
c) Co³⁺
Z = 27Number of protons: 27Number of elecrons of the neutral atom: 27Charge of the ion: + 3Number of electrons of the ion: 27 - charge = 27 - 3 = 24.Electron configuration:Fill the orbitals in increasing order of energy. Using Aufbau's rules the order is: 1s² 2s² 2p⁶ 3s² 3p⁶ 4s² 3d¹⁰ 4p⁶ .....
Hence, for 24 electrons you get:
1s² 2s² 2p⁶ 3s² 3p⁶ 4s² 3d⁴
Abbreviated notation: since the last complete level is the number 3s² 3p⁶, you use the noble gas of the period 3, which is Ar, and the configuration is:
[Ar] 4s² 3d⁴
The following statements concern the relationship between mitochondrial hydrogen ion concentration and energy storage as atp during oxidative phosphorylation. Classify each statement as either accurate or inaccurate.Accurate InaccurateStatementsHydrogen ions cannot freely pass through the inner mitachondrial membraneOxidative phosphorylation relies on the H H+ concentration is lower in the mitochondrial gradient generated by the electron transport chain matrix than in the intermembrane spaceEnergy is generated as a result of the difference in hydrogen ion concentration betweenThe pH in the intermembrane space is higher the mitochondrial matrix and the cytoplasm than the pH in the mitochondrial matrix ATP synthase uses energy from ATP to move H into the mitochondrial matrix
The classification of the statements reveals accurate understanding of hydrogen ion movement during oxidative phosphorylation, with misinterpretations concerning the ATP synthase function and the role of the cytoplasm in energy generation.
Explanation:Let's classify the given statements about the relationship between mitochondrial hydrogen ion concentration and energy storage as ATP during oxidative phosphorylation as either accurate or inaccurate.
Hydrogen ions cannot freely pass through the inner mitochondrial membrane is accurate. The inner mitochondrial membrane is impermeable to these ions and they have to be transported through specific transport systems.Oxidative phosphorylation relies on the H+ concentration gradient generated by the electron transport chain is accurate. The electron transport chain creates an electrochemical gradient (proton motive force) which is used to generate ATP.H+ concentration is lower in the mitochondrial matrix than in the intermembrane space is accurate. This is due to the active transport of H+ ions from the matrix to the intermembrane space during electron transport.Energy is generated as a result of the difference in hydrogen ion concentration between the mitochondrial matrix and the cytoplasm is inaccurate. The energy is actually generated by the difference in hydrogen concentration between the mitochondrial matrix and the intermembrane space, not the cytoplasm.The pH in the intermembrane space is higher than the pH in the mitochondrial matrix is inaccurate. The intermembrane space is more acidic (thus, lower pH) due to the accumulation of H+ ions.ATP synthase uses energy from ATP to move H+ into the mitochondrial matrix is inaccurate. ATP synthase actually uses the energy from the movement of H+ down its concentration gradient to generate ATP. Learn more about Oxidative Phosphorylation here:https://brainly.com/question/29104695
#SPJ3
The accurate statements are that hydrogen ions cannot freely pass through the inner mitochondrial membrane, the oxidative phosphorylation process relies on the H+ gradient, and the H+ concentration is lower in the matrix than the intermembrane space. Incorrect statements include the site of energy generation and the role of ATP synthase.
The student's question pertains to the relationship between mitochondrial hydrogen ion concentration and ATP synthesis during oxidative phosphorylation. Statements must be classified based on their accuracy concerning this biochemical process.
Hydrogen ions cannot freely pass through the inner mitochondrial membrane: Accurate.Oxidative phosphorylation relies on the H+ concentration gradient generated by the electron transport chain: Accurate.H+ concentration is lower in the mitochondrial matrix than in the intermembrane space: Accurate.Energy is generated as a result of the difference in hydrogen ion concentration between the mitochondrial matrix and the cytoplasm: Inaccurate (it's between the matrix and the intermembrane space, not the cytoplasm).The pH in the intermembrane space is lower (more acidic) than the pH in the mitochondrial matrix: Accurate.ATP synthase uses energy from ATP to move H+ into the mitochondrial matrix: Inaccurate (ATP synthase uses the energy from the proton gradient to synthesize ATP from ADP and Pi).All metals a melt at high temperatures b conduct heat and electricity c contain iron d react with air and water
The correct answer is B.
Process A: A + B --> C dG = 101.3 kJ/mol
Process B: D --> C + E dG = -101.3 kJ/mol
If you were tasked with the production of compound C for a pharmaceutical company, which process would you use for it's production based on the data provided and why?
a
Process A, because it releases more energy.
b
Process A, because it is a spontaneous process.
c
Process B, because it releases more energy.
d
Process B, because it is a spontaneous process.
D. Process B, because it is a spontaneous process.
Explanation;A spontaneous process is one that will occur without any energy input from the surroundings.A spontaneous reaction may involve an increase or decrease in enthalpy, it may involve an increase or decrease in entropy, but it will always involve a decrease in free energy that is a negative ΔG.Therefore; process B is spontaneous since it has a negative ΔGProvide an iupac name for the structure shown.
Answer:
3 methylheptane
Explanation:
just toke the test
Gerontology is the scientific study of aging involving various disciplines. It encompasses the understanding of primary and secondary aging phenomena. Specialized fields such as Social Gerontology and Thanatology are also part of this study.
Explanation:The scientific study of the process and phenomena of aging is called Gerontology. Gerontology is a multidisciplinary field, involving medical and biological scientists, social scientists, and economic scholars. It probes the process of aging and the complications faced as individuals grow older.
As aging affects every aspect of human life, biological, social, and psychological, gerontologists aim to understand what it is like to be an older adult in society. The study includes two types of aging- primary aging, which involves inherent biological factors such as molecular and cellular changes, and secondary aging, which is influenced by controllable factors like exercise and diet.
Gerontology also encompasses the specialized field of Social Gerontology, examining the sociological aspects of aging, and Thanatology, the systematic study of death and dying. Scholars in this field also focus on the impact of societal attitudes and beliefs about the aging process.
Learn more about Gerontology here:https://brainly.com/question/14649940
#SPJ5
In a covalent bond, what holds atoms together?
electrons that are shared between atoms
electrons that are transferred from one atom to another
protons that are transferred from one atom to another
a “sea of electrons” around many atoms
In covalent bonding, both atoms are trying to attract electrons--the same electrons. Thus, the electrons are shared tightly between the atoms.
The force of attraction that each atom exerts on the shared electrons is what holds the two atoms together.
Answer: Option (a) is the correct answer.
Explanation:
A covalent bond is defined as the bond which is formed due to sharing of electrons.
For example, a carbon atom has 4 valence electrons and a hydrogen atom has 1 valence electron.
So, when a carbon atom chemically combines with a hydrogen atom then sharing of electrons take place between the two and it results in the formation of a methane molecule.
[tex]C + 2H_{2} \rightarrow CH_{4}[/tex]
Whereas a bond in which transfer of electrons take place from one atom to another is known as an ionic bond.
For example, [tex]2Na + Cl_{2} \rightarrow 2NaCl[/tex]
Thus, we can conclude that in a covalent bond electrons that are shared between atoms holds atoms together.
What are the chemical formulas for..
Heptasulfur Pentoxide:
Trisulfur Monochloride:
Selenium Hexafluoride:
Tetranitrogen Pentasulfide:
Carbon Nonachloride:
???
The chemical formulas are: Heptasulfur Pentoxide: S7O5, Trisulfur Monochloride: S3Cl, Selenium Hexafluoride: SeF6, Tetranitrogen Pentasulfide: N4S5, Carbon Nonachloride: C9Cl8
Explanation:1. Heptasulfur Pentoxide (S7O5): This compound consists of seven sulfur (S) atoms and five oxygen (O) atoms, forming a molecular structure with a total of twelve atoms.
2. Trisulfur Monochloride (S3Cl): This compound is composed of three sulfur (S) atoms and one chlorine (Cl) atom, combining to create a molecule with a total of four atoms.
3. Selenium Hexafluoride (SeF6): Selenium (Se) forms a compound with six fluorine (F) atoms, resulting in a molecule containing a total of seven atoms.
4. Tetranitrogen Pentasulfide (N4S5): This compound includes four nitrogen (N) atoms and five sulfur (S) atoms, making it a molecular structure with a total of nine atoms.
5. Carbon Nonachloride (C9Cl8): This compound comprises nine carbon (C) atoms and eight chlorine (Cl) atoms, forming a molecule with a total of seventeen atoms.
These chemical formulas provide information about the types and quantities of atoms in each compound, and they play a crucial role in understanding the chemical properties and behavior of these substances.
Learn more about Chemical formulas here:https://brainly.com/question/35157423
#SPJ12
____________ tautomers have a C=O and an additional C-H bond.
Ch = sh = why and find the stuff
The highest sustained pressure achieved in the laboratory is 1.5 × 107 kilopascals, kpa. what is this pressure in atm, mmhg, and torr?
Answer:
1.5 × 10⁷ kPa = 148038.5 atm = 1.12 x 10⁸ mmHg = 1.12 x 10⁸ torr.
Explanation:
To convert from kPa to atm:Knowing that:
1 atm = 101.325 kPa.
??? atm = 1.5 × 10⁷ kPa.
Using cross multiplication:
∴ 1.5 × 10⁷ kPa = (1 atm)(1.5 × 10⁷ kPa)/(101.325 kPa) = 148038.5 atm,
To convert from kPa to mmHg:Knowing that:
1.0 kPa = 7.5 mmHg.
1.5 × 10⁷ kPa = ??? mmHg.
Using cross multiplication:
∴ 1.5 × 10⁷ kPa = (7.5 mmHg)(1.5 × 10⁷ kPa)/(1.0 kPa) = 1.12 x 10⁸ mmHg.
To convert from kPa to torr:Knowing that:
1.0 kPa = 7.5 torr.
1.5 × 10⁷ kPa = ??? torr.
Using cross multiplication:
∴ 1.5 × 10⁷ kPa = (7.5 torr)(1.5 × 10⁷ kPa)/(1.0 kPa) = 1.12 x 10⁸ torr.
The pressure of 1.5 × 10⁷ kPa is approximately 148026.77 atm, 112536909.77 mmHg, and 112536909.77 torr.
Explanation:The highest sustained pressure in the laboratory given is 1.5 × 10⁷ kilopascals (kpa). To convert this pressure into different units, we need to use some conversion rates. The conversions rates we need are: 1 atm = 101.325 kPa, 1 mmHg = 0.133322 kPa, and 1 torr = 0.133322 kPa (as 1 torr is equivalent to 1 mmHg).
First, to convert the pressure to atm: (1.5 × 107 kPa) / 101.325 kPa/atm = approx. 148026.77 atmNext, to convert the pressure to mmHg: (1.5 × 107 kPa) / 0.133322 kPa/mmHg = approx. 112536909.77 mmHgLastly, to convert the pressure to torr: (1.5 × 107 kPa) / 0.133322 kPa/torr = approx. 112536909.77 torr (since torr and mmHg are equivalent units).Learn more about Pressure Conversion here:https://brainly.com/question/13969823
#SPJ11
Magnetism is an example of ______ because it is able to push and pull things.
It's a physical phenomenon produced by the motion of electric charge, resulting in attractive and repulsive forces between objects
In one word it is an example of a force
Magnetism is a force that certain objects called 'magnetic' objects can exert on each other without physically touching. It can push or pull things and is described by the arrangement of magnetic fields.
Explanation:Magnetism is a force that certain kinds of objects, which are called 'magnetic' objects, can exert on each other without physically touching. A magnetic object is surrounded by a magnetic 'field' that gets weaker as one moves further away from the object. This force can push or pull other objects. For example, when you bring two magnets close to each other, they can either attract or repel each other based on the arrangement of their magnetic fields.
Learn more about Magnetism here:https://brainly.com/question/13026686
#SPJ2
What is the basic unit of all matter? A. Neutron B. Atom C. Electron D. Proton E. Nucleus
An atom is the basic unit of all matter. The other answers are just pieces of an atom
Answer:
Atom
Explanation:
An atom is basic unit of all the matter.
Matter can be an element, which has only single kind of atom in it. It is pure form of matter. For example gold is an element and has single kind of atom with same atomic numbers.
Matter can be a compound, which has two or more kinds of atoms.
Example water.
Neutron, proton and electron are sub atomic particles. Electrons are present around a central unit of atom known as nucleus.
Nucleus contains protons and neutrons both.
Help me please.
Why does Earth rotate?
a.)Because Earth is formed from cold gases collapsing due to gravity
b.)Because the matter in the nebula that formed Earth was spinning
c.)Because Earth forms more than 99% of the mass of the solar system
d.)Because the hydrogen atoms inside the nebula fused to form helium
I think it's B but I'm not 100% sure srry if I'm wrong
The coefficients of a balanced chemical equation indicate the relative number of
The coefficients of a balanced chemical equation indicate the relative number of moles of each chemical.
When the reaction 3 no(g) → n2o(g) + no2(g) is proceeding under conditions such that 0.015 mol/l of n2o is being formed each second, the rate of the overall reaction is ? and the rate of change for no is ?
Answer:
1) The rate of the overall reaction = Δ[N₂O]/Δt = 0.015 mol/L.s.
2) The rate of change for NO = - Δ[NO]/Δt = 3 Δ[N₂O]/Δt = 0.045 mol/L.s.
Explanation:
For the reaction:3NO(g) → N₂O(g) + NO₂(g).
The rate of the reaction = -1/3 Δ[NO]/Δt = Δ[N₂O]/Δt = Δ[NO₂]/Δt.
Given that: Δ[N₂O]/Δt = 0.015 mol/L.s.
1) The rate of the overall reaction is?
The rate of the overall reaction = Δ[N₂O]/Δt = 0.015 mol/L.s.
2) The rate of change for NO is?
The rate of change for NO = - Δ[NO]/Δt.
∵ -1/3 Δ[NO]/Δt = Δ[N₂O]/Δt.
∴ The rate of change for NO = - Δ[NO]/Δt = 3 Δ[N₂O]/Δt = 3(0.015 mol/L.s) = 0.045 mol/L.s.
The overall reaction rate is 0.015 mol/L·s, and the rate of change for NO is -0.045 mol/L·s. This is based on the stoichiometric coefficients in the balanced equation 3 NO(g) → N₂O(g) + NO₂(g). For every mole of N₂O formed, 3 moles of NO are consumed.
To find the rate of the overall reaction and the rate of change for NO in the reaction 3 NO(g) → N₂O(g) + NO₂(g), we start with the given information that 0.015 mol/L of N₂O is being formed each second. This implies the rate of formation of N₂O is 0.015 mol/L·s.
The rate of the reaction can be expressed using the stoichiometric coefficients from the balanced equation. Since 3 moles of NO are consumed for every 1 mole of N₂O formed, the rate of the reaction in terms of N₂O formation is:
Rate of reaction = (1/1) × 0.015 mol/L·s = 0.015 mol/L·s
Next, for the rate of change of NO, we consider the stoichiometry of the reaction. For each mole of N₂O formed, 3 moles of NO are consumed. Thus, the rate of change for NO is:
Rate of change for NO = -3 × (rate of formation of N₂O)
This gives us:
Rate of change for NO = -3 × 0.015 mol/L·s = -0.045 mol/L·s
29) The pH scale runs from 0 to 14, and is an indication of how acidic or basic a solution is. A pH close to zero indicates a(n) _______ solution, and a pH near 14 indicates a(n) _______ solution. A) acidic; basic B) basic; acidic C) neutral; basic D) acidic; neutral
The correct answer is: A) acidic, basic.
The doctor knows that people taking the medicine may sleep better just because they expect the medicine to work. How can he be sure of whether the medicine really works?
The best test would be doing a double-blind test between the person who is receiving the medicine so that they don't know if they received a placebo or not and the person giving the medicine does not know if the participant is receiving a placebo or not.
However, a placebo test can simply be done. This is where the patient received a medicine that does not have any medicinal effects and see if the person sleeps better. If they say they did, they have fallen under the placebo effect.
The word root for a group of microorganisms living together is a. steriliz. b. prodrom. c. coloniza. d. nosocomi.
The answer is C) Coloniza.
What are the different types of energy involved when you lift your book bag off the floor and drop it?
Kinetic energy can be one of them and potential because when u hold the book bag before dropping it there is potential energy happening
Consider a pure crystalline solid that is heated from absolute zero to a temperature above the boiling point of the liquid. Which of the following processes produces the greatest increase in the entropy of the substance? A) melting the solid B) heating the liquid C) heating the gas D) heating the solid E) vaporizing the liquid
The answer is a. Melting the solid.
A solution at 25 degrees Celsius is 1.0 × 10–5 M H3O+. What is the concentration of OH– in this solution?
Answer:
[OH⁻] = 1.0 x 10⁻⁹ M.
Explanation:
∵ [H₃O⁺][OH⁻] = 10⁻¹⁴.
∴ [OH⁻] = 10⁻¹⁴/[H₃O⁺] = 10⁻¹⁴/(1.0 x 10⁻⁵) = 1.0 x 10⁻⁹ M.
Given: 2H2O2 → 2H2O + O2 structure of H2O2: H–O–O–H Bond Bond Energy (kJ/mol) O–H 459 O=O 494 O–O 142 Based on the given bond energies, what is the enthalpy change for the chemical reaction? A. -352 kJ B. -210 kJ C. -176 kJ D. -105 kJ
Answer:
B. - 210 kJ
Explanation:
∵ ΔHrxn = ∑(bond energies)products - ∑(bond energies)reactants.
The bond formation in the products releases energy (exothermic).The bond breaking in the reactants requires energy (endothermic).The products:
H₂O contains 2 O-H (- 459 kJ/mol) bonds.O₂ contain 1 O=O (- 494 kJ/mol) bond.The reactants:
H₂O₂ contain 2 O–H (459 kJ/mol) bonds and 1 O–O (142 kJ/mol) bond.∵ ΔHrxn = ∑(bond energies)products - ∑(bond energies)reactants.
∴ ΔHrxn = [2 (2 x (O–H bond energy) + (1 x (O=O bond energy)] - 2 [(2 x (O–H bond energy) + (1 x (O–O bond energy)] = [2 (2 x - 459 kJ/mol) + (1 x - 494 kJ/mol)] - 2 [(2 x 459 kJ/mol) + (1 x 142 kJ/mol)] = (- 2330 kJ) + (2120 kJ) = - 210 kJ.
Answer:
B. - 210 kJ
Explanation:
∵ ΔHrxn = ∑(bond energies)products - ∑(bond energies)reactants.
The bond formation in the products releases energy (exothermic).
The bond breaking in the reactants requires energy (endothermic).
The products:
H₂O contains 2 O-H (- 459 kJ/mol) bonds.
O₂ contain 1 O=O (- 494 kJ/mol) bond.
The reactants:
H₂O₂ contain 2 O–H (459 kJ/mol) bonds and 1 O–O (142 kJ/mol) bond.
∵ ΔHrxn = ∑(bond energies)products - ∑(bond energies)reactants.
∴ ΔHrxn = [2 (2 x (O–H bond energy) + (1 x (O=O bond energy)] - 2 [(2 x (O–H bond energy) + (1 x (O–O bond energy)] = [2 (2 x - 459 kJ/mol) + (1 x - 494 kJ/mol)] - 2 [(2 x 459 kJ/mol) + (1 x 142 kJ/mol)] = (- 2330 kJ) + (2120 kJ) = - 210 kJ.
A 0.500 L bottle of water contains 8.82 × 10–7 mL of benzene. What is the concentration of benzene in ppmv?
0.00176 ppmv
This is the answer for ed
Answer:
the answer is 0.00176 ppmv
Explanation:
trust me bro, im asian
Consider the reaction: so2cl2(g)⇌so2(g)+cl2(g) kp=2.91×103 at 298 k in a reaction at equilibrium, the partial pressure of so2 is 0.156 atm and that of cl2 is 0.370 atm . part a what is the partial pressure of so2cl2 in this mixture?
Answer:
1.98 x 10⁻⁵ atm.
Explanation:
For the reaction: SO₂Cl₂(g) ⇌ SO₂(g) + Cl₂(g), Kp = 2.91 x 10³.∵ Kp = (PSO₂)(PCl₂)/(PSO₂Cl₂).
PSO₂ = 0.156 atm, PCl₂ = 0.370 atm.
∴ 2.91 x 10³ = (0.156 atm)(0.370 atm)/(PSO₂Cl₂)
∴ (PSO₂Cl₂) = (0.156 atm)(0.370 atm)/(2.91 x 10³) = 1.98 x 10⁻⁵ atm.
The partial pressure of [tex]SO_2Cl_2[/tex] in the given mixture is approximately 0.00199 atm.
The equilibrium constant (Kp) expression and the partial pressures of [tex]SO_2[/tex] and [tex]Cl_2[/tex] can be used to calculate the partial pressure of [tex]SO_2Cl_2[/tex] in a given combination.
The equilibrium constant expression for the reaction is:
[tex]Kp = (P(SO_2) * P(Cl_2)) / P(SO_2Cl_2)[/tex]
We are given:
Kp = [tex]2.91 * 10^3[/tex]
[tex]P(SO_2)[/tex] = 0.156 atm
[tex]P(Cl_2)[/tex]= 0.370 atm
substituting the vales into the equilibrium constant expression and solve for [tex]P(SO_2Cl_2)[/tex]:
[tex]2.91 * 10^3 = (0.156 * 0.370) / P(SO2Cl2)\\2.91 * 10^3 * P(SO_2Cl_2) = 0.156 * 0.370\\P(SO_2Cl_2) = (0.156 * 0.370) / (2.91 * 10^3)[/tex]
[tex]P(SO_2Cl_2) = 0.00199 atm[/tex]
Hence, the partial pressure of [tex]SO_2Cl_2[/tex] in the given mixture is approximately 0.00199 atm.
Learn more about equilibrium constant expression, here:
https://brainly.com/question/32445000
#SPJ6
HURRY>>> PLEASE. Which statements best describe wavelengths of sunlight that are longer than 700 nanometers? Check all that apply.
A.These wavelengths are longer than the wavelengths of visible light.
B.These wavelengths form the infrared part of the spectrum.
C.These wavelengths form the ultraviolet light of the spectrum.
D.These wavelengths are shorter than the wavelengths of visible light.
E.These wavelengths are part of the visible light spectrum.
Answer:
These wavelengths are longer than wavelength of visible light.
These wavelengths form the infra-red part of the spectrum.
Explanation:
Solar spectrum lies in three parts of the electromagnetic spectrum, that is; Ultraviolet, visible and infra-red. Visible light lies from 400 nm to 700 nm.Ultraviolet region precedes visible spectrum and has shorter wavelength than it. Beyond visible spectrum, infrared part of the spectrum starts and has longer wavelength than it.The wavelength of sunlight that are greater than 700 nm wavelength have longer wavelength than visible light and lie in the infra-red part of the spectrum.Answer:
its d,b,e
Explanation: