Answer:
Yes
Explanation:
Sulfur in its pure do not have any taste and odor but many foods rich in sulfur can have a distinct odor and taste. The foods contains sulfur in very small amounts but some of the foods which are known for rich in sulfur are onion, garlic, egg, flex seeds, walnuts, meat, red bell pepper, cheese, green vegetables etc.
The foods rich in sulfur helps in fighting skin acne and fights skin infection which makes our skin brighter because of this property of sulfur it is used in skin antiseptic creme and medicines.
The intake of the excess sulfur can cause burning sensation, diarrhea, tonsils and even can cause brain damage if taken in too excess and death of the brain cells. So, the sulfur is good for health and is a remedy for our skin if taken by the natural source of food in a healthy amount.
Answer:
He is right, sulfured food dose taste different
2
How
12.6
Sn + 2 HF - Snf a + H₂
many moles of tin (11) Fluoride will be produced
grams of hydrogen fluoride react?
if
Answer:
12.6 gram of HF will produced 0.315 moles of SnF₂
Explanation:
Given data:
Mass of HF = 12.6 g
Moles of Tin fluoride produced = ?
Solution:
Chemical equation:
Sn + 2HF → SnF₂ + H₂
Number of moles of HF:
Number of moles = mass/ molar mass
Number of moles = 12.6 g/20.01 g/mol
Number of moles = 0.63 mol
Now we will compare the moles of HF with SnF₂.
HF : SnF₂
2 : 1
0.63 : 1/2×0.63 = 0.315 mol
So 12.6 gram of HF will produced 0.315 moles of SnF₂.
how manymoles are in 7.6g of ca
Answer: 0.19mol
Explanation
Mass of Ca = 7.6g
Molar Mass of Ca = 40g/mol
n = Mass /Molar Mass = 7.6/40
n = 0.19mol
How do you balance a chemical reaction?
Answer:
write down the number of atoms in each element, which is listed in the subscript next to each atom. Then, add coefficients to the atoms on each side of the equation to balance them with the same atoms on the other side.
Explanation:
Final answer:
To balance a chemical equation, write the correct formulas, count the atoms of each element, adjust coefficients to balance the atoms, use polyatomic ions as units, eliminate fractional coefficients for whole numbers, and check that all elements are balanced.
Explanation:
To balance a chemical reaction, one must ensure that the number of atoms for each element is equal on both sides of the equation. This is key to upholding the law of conservation of mass. The following steps are a simplified guide:
Write the skeleton equation with the correct formulas for reactants and products.
Count the number of atoms of each element in the reactants and in the products.
If the equation is not balanced, adjust the coefficients before the formulas, not the subscripts within them, to balance the atoms of each element.
Balance polyatomic ions as a unit if they appear unchanged on both sides of the equation.
Use fractional coefficients if necessary, and then multiply the entire equation to eliminate fractions and have whole number coefficients.
Perform a final check to ensure that all elements are balanced.
Throughout this process, one may use a trial-and-error approach to fine-tune the balancing, adjusting coefficients as needed until the number of atoms for each element is the same on both sides of the equation.
which noble gas has the highest first ionization energy
Answer:
Helium has the highest First Ionization Energy in the Noble Gases group. Ionisation energy is the energy required to remove one mole of electrons from one mole of gaseous atoms.
Final answer:
Helium (He) has the highest first ionization energy among the noble gases, attributed to its stable valence shell configuration and minimal electron shielding effect.
Explanation:
The noble gas with the highest first ionization energy is Helium (He). This can be understood considering the general trend that ionization energy increases as one moves across a period from left to right in the periodic table. Noble gases, situated at the far right of the periodic table, consequently have the highest ionization energies within their respective periods due to their stable electronic configurations, with filled valence shells.
Among the noble gases, Helium, being the lightest and having the least number of electron shells, demonstrates the least shielding effect. This results in its valence electrons being more strongly attracted to the nucleus compared to other noble gases, thereby requiring more energy to remove an electron, i.e., higher ionization energy. In contrast, heavier noble gases like Xenon (Xe) and Radon (Rn) exhibit relatively lower first ionization energies due to increased electron shielding from inner electrons.
The simulation shows a quantity of oxygen molecules. What state of matter is this?
Answer:
It should be gas.
Explanation:
It should be gas but I don't see the simulation so it's possible that it's solid/liquid
Identify the combustion reaction.
a) Al 2S 3 — 2A1 + 35
b) 2H 2 + O2 – 2H 20
c) C12 + 2KBr — 2KCI + Br2
d) C4H 12 + 70 2 - 6H 20 + 4CO 2
Answer:
D) C4H 12 + 70 2 - 6H 20 + 4CO 2
Explanation:
I'm certain this is a combustion reaction.
What is the oh- given the value of h30+=(9.61x10^-2) M?
Answer:
OH⁻ = 1.05×10⁻¹³ M
Explanation:
Given data;
H₃O⁺ = 9.61×10⁻² M
OH⁻ = ?
Solution:
First of all we will calculate the pH.
pH = -log [H⁺]
pH = -log [H₃O⁺]
Because pH is also the hydronium ion concentration.
pH = -log [ 9.61×10⁻²]
pH = 1.02
It is known that,
pH + pOH = 14
1.02 + pOH = 14
pOH = 14 - 1.02
pOH = 12.98
Concentration of OH⁻.
pOH = -log [OH⁻]
12.98 = -log [OH⁻]
OH⁻ = 10∧-12.98
OH⁻ = 1.05×10⁻¹³ M
help needed ASAP plz
Answer:
6 cucumberslices.
Explanation:
You can make a maximum of 4 sandwiches. 8 slices of tomato and 2 needed for each. 8/4=2. You need 4 slices of cucumber per sandwich and have 22. the maximum of sandwiches we can make is 4 so 4×4=16. 22-16=6 leftover slices of cucumber.
Give an example of a solution that can be seperated by simple distilation.
Answer: Evaporation of salt water
Explanation: During the process of evaporating salt water which involves simple distillation, pure water is separated with salt molecules.
When heated water evaporates from the solution since it is less dense. When condensed it becomes pure water and salt is left out since it is more denser.
Carole owns a two story house with a heating and cooling unit on each floor. In the winter she mostly uses the downstairs unit because the volume of warm air __________ and __________ warming the whole house through __________.
A) expands, rises, convection
B) expands, sinks, conduction
C) contracts, rises, conversion
D) contracts, sinks, contraption
The molecular weight of calcium carbonate, CaCO3, is 100.09 3.
mol
How many moles of calcium carbonate are in 63.8 g of calcium carbonate?
Express the answer using 3 significant figures.
Answer:
Number of Moles = Reacting mass / Molecular mass
= 63.8 / 100.09
= 0.637g
Hence, the moles of calcium carbonate in 63.8 g of calcium carbonate is 0.637g
Explanation:
The number of moles of a compound is the ratio of weight given to the molar mass. One mole calcium carbonate is 100.09 g/mol. Then, the number of moles in 63.8 g of calcium carbonate is 0.638 moles.
What is one mole of a substance ?One mole of a substance is its amount containing 6.02 × 10²³ number of its atoms. This number is called Avogadro number. Hence, one mole of any element contains Avogadro number of atoms. The mass of one mole of an element is called atomic mass.
Similarly one mole of any compound contains Avogadro number of molecules. The mass of one mole of the compound is called its molar mass.
Molar mass of calcium carbonate = 100.9 g/mol
given mass = 63.8 g
then, number of moles = 63.8 /100.9 g = 0.693 moles.
Therefore, the number of moles of 63.8 g of calcium carbonate is 0.693 moles.
Find more on number of moles:
https://brainly.com/question/12513822
#SPJ2
in which atmosphere layer does 80% of the gas in the atmosphere reside
Answer:troposphere
Explanation:The troposphere is the layer that holds 80 percent of the total gas in the atmosphere.
Which of the following most likely happens when astronauts go to space?
1. Their heart rate speeds up because the blood vessels have less blood to circulate.
2. Their heart rate speeds up because the blood vessels have more blood to circulate.
3. The blood vessels in their neck caves in because the heart pumps less blood per beat.
4. The blood vessels in their neck bulges out because the heart pumps more blood per beat.
Answer:
4. The blood vessels in their neck bulge out.
Explanation:
This option is closest to being correct.
On Earth, the force of gravity pulls blood to the lower body. In space, the force of gravity is cancelled, so the blood spreads out evenly.
More blood in the upper body leads to increased blood pressure there, so the blood vessels in the neck bulge out.
The heart does not pump more blood per beat. Instead, it becomes lazy because it does not have to do as much work pumping blood back from the legs against the force of gravity.
A and B are wrong. You don't gain or lose blood simply by going into space.
C is wrong. The blood vessels in the neck bulge out.
The blood vessels in their neck bulge out because the heart pumps more blood per beat most likely happens when astronauts go to space.
Does the universe affect blood flow?In microgravity, the heart transforms from an elliptical shape (like a balloon filled with water) to a round sphere (a balloon filled with air), and the universe causes atrophy of the muscles that work on Earth and blood vessels. Shrinks. Nor can it control blood flow.
There are completely different results in the universe. There is no gravity that draws blood into the lower body. Instead, blood flows into the chest and head, the astronaut's face swells, and the blood vessels in the neck swell. And appearance isn't the only ugly side effect.
Learn more about astronauts blood vessels here: https://brainly.com/question/3975539
#SPJ2
Use the periodic table to determine the electron configuration for Ca and Pm in noble-gas notation
Ca:
Pm:
✓
Ca:
[Ar]4s
[Ar]4s
[Xe]6s2506
[Xe]6s25f4
Pm:
[Xe6s245
[Xe]6s244
[Ar]3s2
[kr]452
Answer:
Ca: [Ar] 4s²
Pm : [Xe} 6s² 4f⁵
Explanation:
The electronic configuation of an element in noble gas notation is written by giving the symbol of the nearest noble gas that is present in the period above it in the periodic table, followed by the electronic configuration of the remaining electrons.
For Ca the atomic no is 20
It is in 4th period.
The electronic configuration of Ca is 1s²2s²2p⁶3s²3p⁶4s²
1s²2s²2p⁶3s²3p⁶ represents the electronic congiguation of Ar with completely filled valence shell. So we can represent electronic configuration of Ca as [Ar] 4s².
The atomic no. of Promethium,Pm is 61. It's electronic configuration is
1s²2s²2p⁶3s²3p⁶4s² 3d¹⁰4p⁶5s²4d¹⁰5p⁶6s²4f⁵
1s²2s²2p⁶3s²3p⁶4s² 3d¹⁰4p⁶5s²4d¹⁰5p⁶ is the configuration of the noble gas Xe . So we can represent electronic configuration of Pm as
[Xe} 6s² 4f⁵
Answer:
Ca: [Ar] 4s²
Pm : [Xe} 6s² 4f⁵
Explanation:
What is the velocity of a rocket that goes 700 km north in 25 second
Answer: 28000m/s
Explanation:
Displacement = 700 km due north = 700000m
Time = 25secs
Velocity =?
Velocity = Displacement / Time
V = 700000 / 25 = 28000m/s
What is the formula for “ammonium sulfite”
Answer:
(NH₄)₂SO₃
Explanation:
Data Given:
formula for "ammonium sulfite”
Solution
Ammonium sulfite consist of following atoms
Nitrogen = N
Hydrogen = H
Sulfur = S
Oxygen = O
Now we will look for the symbols of ammonium and sulfite
Ammonium = NH₄⁺
ammonium consists one nitrogen and 4 hydrogen atoms. it have overall 1 positive charge.
Sulfite = SO₃²⁻
it have one sulfur and 2 oxygen atoms. the overall charge is 2-.
Now we will write Both ammonium and sulfite ions together. the charges will are the combining power and will be written at the base of the alternate position formula unit.
(NH₄)₂SO₃
So 2 ammonium ions combine with one sulfite ion.
So the formula for “ammonium sulfite” is (NH₄)₂SO₃
The formula of compound that shows the types and numbers of atoms present in a molecule of the compound ammonium sulfite is (NH₄)₂SO₃.
The formula of a compound is a chemical shorthand that provides information about the composition of the compound. The formula typically consists of the atomic symbols of the elements present in the compound, along with subscript numbers indicating the number of atoms of each element.
For example, the formula of water is H₂O, which indicates that it contains two hydrogen (H) atoms and one oxygen (O) atom. Similarly, the formula of sodium chloride is NaCl, representing one sodium (Na) atom and one chlorine (Cl) atom.
The formula of a compound is essential for understanding its chemical properties, stoichiometry, and reactions. It provides a concise way to represent the arrangement of atoms in a molecule and allows scientists to communicate and work with compounds more efficiently.
Learn more about Formula of compound, here:
https://brainly.com/question/32900415
#SPJ6
( Balance each equation) Na + MgF2 NaF + Mg
Answer:
2Na + MgF₂ → 2NaF + Mg
Explanation:
Chemical equation:
Na + MgF₂ → NaF + Mg
Chemical equation:
2Na + MgF₂ → 2NaF + Mg
The given reaction follow the law of conservation of mass because there are equal number of atoms of sodium, magnesium and fluorine are present on both side of equation.
According to the law of conservation mass, mass can neither be created nor destroyed in a chemical equation.
This law was given by french chemist Antoine Lavoisier in 1789. According to this law mass of reactant and mass of product must be equal, because masses are not created or destroyed in a chemical reaction.
Type of reaction:
The given chemical reaction is type of single replacement reaction. Sodium replace the magnesium and form sodium fluoride.
Single replacement:
It is the reaction in which one elements replace the other element in compound.
AB + C → AC + B
6.755 mol Pb(SO4)2
How many atoms
Answer: 4.07x 10²⁴ atoms Pb( SO4)2
Explanation: Solution:
6.755 moles Pb(SO4)2 x 6.022x10²³ atoms Pb(SO4)2 / 1 mole Pb(SO4)2
= 4.07x10²⁴ atoms Pb(SO4)2
What best describes the goals of scientific investigation and technological development?
Both scientific investigation and technological design aim to solve problems by making more cost
products.
Both scientific investigation and technological design aim to conduct experiments to uncover new i
results.
Scientific investigation aims to design products that can make use of new information, whereas tec
aims to conduct experiments to improve affordability and availability.
Scientific investigation aims to design and implement an experiment to learn new information, where
development aims to design a product to solve a problem.
Answer:
Scientific investigation aims to design and implement an experiment to learn new information, where
development aims to design a product to solve a problem.
Explanation:
Answer:
D
Explanation:
Scientific investigation aims to design and implement an experiment to learn new information, whereas technological development aims to design a product to solve a problem.
What are the 4 results of cell division?
Answer:
Metaphase
prophase
anaphase
telophase
Explanation:
Which statement correctly describes two organ systems working together when the body increases its movement?
Answer:
Explanation: The respiratory system increases gas exchange, and the circulatory system circulates blood faster to deliver oxygen to muscles.
When an ion is positive is has____ electrons
Answer:
When an ion is positive is has "more protons than" electrons
Explanation:
In case of an atom when gets involved with other atom due to uneven nos. of electrons and the protons, the atom formed is known as the ion. When, the atom has higher number of electrons than that of the protons it will form an negative ion. Bt in case of more number of protons as compared to the electrons it will form a positive ion. The ion with positive charge is basically called as the cation, with negative charge called as anion.
What is the mass of 5.43x1045 molecules of Beo
Answer:
2.255 x 10²³ g
Explanation:
Data Given:
no. of molecules of BeO = 5.43 x 10⁴⁵ molecules
mass of BeO = ?
Solution:
first we will find no. of moles
Formula used
no. of moles = no. of molecules / Avogadro's number
Where
Avogadro's number = 6.022 x 10²³
Put values in above equation
no. of moles = 5.43 x 10⁴⁵ molecules / 6.022 x 10²³ (molecules/mol)
no. of moles = 9.02 x 10²¹ mol
So,
There are 9.02 x 10²¹ moles of BeO of 5.43x10⁴⁵
Now we will find the mass
For this formula will be used
No. of moles = Mass in grams/ molar mass
Rearrange the above equation
mass in grams = no. of moles x molar mass . . . . . (1)
molar mass of BeO = 9 + 16 = 25 g/mol
Put values in equation 1
mass in grams = 9.02 x 10²¹ moles x 25 g/mol
mass in grams = 2.255 x 10²³ g
So,
Mass of 5.43 x 10⁴⁵ molecules of BeO = 2.255 x 10²³ g
The mass of 5.43x10^45 molecules of BeO can be calculated using the atomic masses provided in Appendix A.
Explanation:The mass of 5.43x10^45 molecules of BeO can be calculated using the atomic masses provided in Appendix A. The atomic mass of BeO is given by the formula BE = {[2m(^1H) + 2mn] - m(ª X)}c². We can substitute the atomic masses of ^1H (1.007825 u) and mn (1.008665 u) into the formula to calculate the binding energy (BE). By rearranging the formula, we can solve for the mass of 5.43x10^45 molecules of BeO.
Is testing for fingerprints on a door a physical or chemical change
Answer:
Dusting for fingerprints makes use of the physical property of stickiness. Skin oils absorb the fingerprint dust, which is then collected on a sticky tape.
Dusting for fingerprints makes advantage of stickiness as a physical change. Skin oils adsorb the dust from fingerprints.
What is physical change ?Physical modifications are those that modify a chemical substance's shape but not its chemical content. Physical changes are normally unable to divide compounds into chemical elements or simpler compounds, although they can be utilized to separate mixtures into their components.
A physical change happens when a substance's physical characteristics change without undergoing chemical composition. Melting, changes in size, volume, color, and crystal shape are examples of common physical changes.
Thus, the dusting for fingerprints makes advantage of stickiness as a physical change. Skin oils adsorb the dust from fingerprints.
To learn more about physical change follow the link;
https://brainly.com/question/3680148
#SPJ2
Jöns Jakob Berzellus _.
developed atomic theory
created the Periodic Table of Elements
proposed the planetary atomic model
Invented the chemical notation system
Answer:
Jöns Jakob Berzellus _
Invented the chemical notation system
Explanation:
Meaning of chemical notation : It is the representation of chemical composition of element by symbols.
Berzelius was the first person to measure accurate atomic weight of the elements, which helped to confirm Dalton's Atomic Theory.
He described how chemical bonds are formed by electrostatic attraction.
Berzelius, work with atomic weight and his theory of electrochemical dualism led to the development of Chemical notation that decide the chemical notation of the compounds.This chemical notation determines about the element both qualitatively and quantitatively.
He identified that compounds can be distinguished by the opposing constituents which are the acidic constituent , the basic and the neutral part.
This formula representation is given by Berzelius.
Answer:
Jöns Jakob Berzellus
Invented the chemical notation system
Explanation:
I got this one right on my test so it is right.
will make brainliest if answer correctly.
Why would you expect strontium to be chemically more similar to calcium?
They are in the same family/group.
They are in the same period.
They have the same atomic number.
They have the same atomic mass.
Answer:
They are in the same family/group.
Explanation:
Both Ca and Sr are Group 2 elements, so can be expected to have similar chemical properties. Strontium would be expected to be chemically similar to calcium because they are in the same family/group.
What is the mass of 5 miles in ba3n2
Answer:
2200 g
Explanation:
Data Given:
no. of moles of Ba₃N₂ = 5 moles
mass of Ba₃N₂ = ?
Solution:
Formula used
no. of moles = mass in grams / molar mass
To find mass rearrange the above equation:
mass in grams = no. of moles x molar mass. . . . . . (1)
molar mass of Ba₃N₂
molar mass of Ba₃N₂ = 3(137.3) + 2(14)
molar mass of Ba₃N₂ = 412 + 28
molar mass of Ba₃N₂ = 440 g/mol
Put values in equation 1
mass in grams = 5 moles x 440 g/mol
mass in grams = 2200 g
So,
mass of Ba₃N₂ = 2200 g
If an atom gains an electron, what overall charge will it have?
Answer:
The atom will have a negative charge.
Explanation:
Electrons are subatomic particles with a negative charge, protons are subatomic particles with a negative charge, and neutrons have no charge. When a neutral atom's balance is disrupted by an extra electron, the atom becomes negatively charged.
Answer:
it will have a negative charge
Explanation:
There are four distinct techniques used to separate mixtures described in this lesson. Name and describe each technique.
Explanation:
Mixtures
They are formed when two or more substances are simply mixed in any ratio not chemically combined with each other.
Characteristics
They can be homogeneous or heterogeneous in nature that is the constituents can be seen to have visible boundaries or they may appear to mix thoroughly. The Properties of mixtures are same as that of constituents. The constituents can be separated by physical methods. Their formations do not require or release energy as there is no bond formation or breakage involved. The Properties of mixtures like melting point & boiling points are not fixed.Let us discuss few techniques :
1. Evaporation
For example :To obtain colored component (Dye) from Ink
Materials Required : Watch glass ink (blue/ black) beaker , stand, burner.
Procedure :
Take a beaker and fill it half with water. Take ink (Blue/ black) in the watch glass and place it on the mouth of the beaker Start heating the beaker and observe. Heating is continued as long as the evaporation is taking place Heating is stopped when no any further change can be noticed on the watch glassObservation:
Evaporation taking place from the watch glass can be seen
Residue is left on the watch glass
Conclusion drawn :
it can be concluded that ,”Ink is not a pure substance but it is a mixture of dye in water which can easily be separated by evaporation method”. Ink is not a single substance2, Centrifugal method
For example : To separate cream from milk by using centrifuge method.
Materials Required : Full cream milk centrifuging machine/milk churner, jug test-tubes.
Procedure:
Take un-boiled cold milk in two test-tubes and place these test-tubes in a centrifuging machine Centrifuge it at high speed by using a hand centrifuging machine for two minute and observe.Observation
Cream floating on the milk can be seen.
Conclusion drawn
When milk is rotated at high speed then the suspended lighter particles (fats and protein molecules) bind with each other forming ‘cream’ and ‘skimmed milk’. The cream being lighter floats over the skimmed milk which can be removed easily.
3. Sublimation
For example :To separate a mixture of common salt and ammonium chloride :
Materials Required : China dish, tripod stand mixture of common salt and ammonium chloride glass funnel cotton and burner.
Procedure:
Take the mixture of sand and ammonium chloride in a china dish. Cover the china dish with an inverted glass funnel and place it on a tripod stand. Put a loose cotton plug in the opening of the funnel so as to prevent the escape of ammonium chloride vapors. Heat the china dish on a low flame and observe.Observation :
White fumes (vapors) of ammonium chloride can be seen coming out of the mixture. These white fumes start depositing as white solid on coming in contact with the cold, inner walls of the funnel. Sand salt is left behind in the china dish.Conclusion drawn: Ammonium chloride, being a volatile substance , changes into white vapors easily which deposits on the cold inner wall of the funnel. This ammonium chloride obtained is called the
What is true of greenhouse gases
Let us explain about green house gases
Explanation:
Green house effect
It can be explained as :
The sun emit radiations that consist of infra red rays , ultra violet rays and visible light .The infra red rays (responsible for heating ) when come from sun , it travels through atmosphere and reaches earth surface .On striking the earth surface , it gets reflected and reflected infra red ray has greater wavelength .Then this reflected rays moves back through atmosphere .On doing so , they encounter certain gas molecules like carbon dioxide , methane etc .This gases absorb these rays and do not let them to escape through them .As a result, they get trapped .As we have already mention that they cause heating effect , due to this property they raise the temperature of atmosphere leading global warming .