Could you please help

Actually Rb or Rubidium in zero state has the following electron configuration:

1s22s22p63s23p63d104s24p65s1

However we can see that the ion has a 1 positive charge, which means that it lacks 1 electron, therefore the answer from the choices is:

Rb forms a +1 ion by losing one electron, leaving it with an electron configuration of 1s22s22p63s23p64s23d104p6. The correct answer is option B.

The given options describe potential +1 ion states of the element rubidium (Rb). When Rb forms a +1 ion, it does so by losing one electron. In its ground state, Rb has the electron configuration 1s22s22p63s23p64s23d104p65s1. When it forms a +1 ion, it becomes Rb+, losing the one electron in the 5s shell. Therefore, the correct electron configuration for Rb+ is 1s22s22p63s23p64s23d104p6, which matches option B from your list.

https://brainly.com/question/1563882

#SPJ6

The mass percent of NaHCO₃ in the mixture is approximately 59.11%.

To calculate the mass percent of NaHCO₃ in the mixture, we use the formula:

Mass percent of NaHCO₃ = [tex]\frac{Mass of NaHCO_3}{Total mass of the mixture} \times 100[/tex]

Given the masses of the ingredients:

- Aspirin: 325 mg

- Citric acid: 1000 mg

- NaHCO₃: 1916 mg

First, we convert these masses to grams to make the calculation easier, since the standard unit for mass in chemistry is grams:

325 mg = 0.325 g

1000 mg = 1.000 g

1916 mg = 1.916 g

Now, we calculate the total mass of the mixture:

Total mass = 0.325 g + 1.000 g + 1.916 g

Total mass = 3.241 g

Next, we calculate the mass percent of NaHCO₃:

Mass percent of NaHCO₃ = [tex]\left( \frac{1.916 \text{ g}}{3.241 \text{ g}} \right) \times 100[/tex]

Now, we perform the division and multiply by 100 to find the mass percent:

Mass percent of NaHCO₃ = [tex]\left( \frac{1.916}{3.241} \right) \times 100[/tex]

Mass percent of NaHCO₃ = 0.5911 x 100

Mass percent of NaHCO₃ = 59.11%

Answer:

-196.0 kJ

Explanation:

50 °F would give a possible chance of the molecules aligning just right for a chemical change because the higher the temperature, the more excited, or active the molecules will become. When there is more activity, there is more collision, which results in heat from the friction, and they will have a higher chance for chemical change because of the frequent run-ins of these molecules.

Hope this helps! If it's right or wrong, please let me know :)

Among the species listed, Zn and Ge2+ are isoelectronic with each other, each containing 30 electrons. Ar and Cl- are also isoelectronic, with 18 electrons each.

The species that are isoelectronic with each other among the given atoms and ions (Zn, Fe3+, Mn2+, Ar, Ge2+, Cl-, B-, C) are those that have the same number of electrons and thus the same electron configuration. To identify which are isoelectronic, we look at their electron configurations after the ions have lost or gained the necessary electrons.

Considering the above configurations, Zn (30 electrons) and Ge2+ (30 electrons) are isoelectronic with each other, as well as Ar (18 electrons) and Cl- (18 electrons), since they have the same number of electrons. The other atoms and ions listed do not have a species with which they are isoelectronic in this group.

Answer:

[tex]36.6molCH_4[/tex]

Explanation:

Hello,

The carried out chemical reaction is:

[tex]CO_2+4H_2-->CH_4+2H_2O[/tex]

With the given moles of carbon dioxide, one computes the required moles of methane by applying the following stoichiometric relationship based on the undergoing chemical reaction.

[tex]36.6molesCO_2*\frac{1molCH_4}{1molCO_2}=36.6molCH_4[/tex]

Best regards

Final answer:

In a theoretical or indirect conversion process not detailed in the examples, where carbon dioxide reacts with hydrogen to produce methane, 36.6 moles of carbon dioxide would produce 36.6 moles of methane, assuming a simple 1:1 stoichiometry for CO₂ to CH₄.

Explanation:

The question pertains to the reaction of carbon dioxide gas with hydrogen gas to produce methane. According to the information provided, one mole of methane molecules reacts with two moles of oxygen molecules to yield one mole of carbon dioxide molecules and two moles of water molecules. However, the direct reaction converting carbon dioxide to methane in the presence of hydrogen is not directly provided in the examples.

Given the stoichiometry mentioned, a direct conversion from carbon dioxide to methane isn't specified. Instead, the given reactions suggest the combustion of methane or its reaction with water, leading to the formation of carbon dioxide rather than its conversion back to methane.

Given this, it's assumed that the question implies a theoretical reverse process or a different reaction pathway (such as a methanation process that is not detailed in the examples given), which could convert carbon dioxide back to methane using hydrogen.

Typically, in a methanation reaction, carbon dioxide (CO₂) reacts with hydrogen (H₂) to produce methane (CH₄) and water. If we assume a simple stoichiometry of 1:1 for CO₂ to CH₄ in a direct or catalyzed process, then 36.6 moles of carbon dioxide would theoretically produce 36.6 moles of methane under conditions allowing for complete conversion.

The valence electron configuration of sulfur S = 3s²3p⁴

Valence electron configuration of Br = 4s²4p⁵

In SBr4, the central Sulfur (S) atom forms 4 covalent bonds with the 4 bromine (Br) atoms. In addition it has 1 lone pair of electrons.

Since the electron geometry not only considers the bond pairs but the lone pairs as well, in the case of SBr4 this would be trigonal bipyramidal.

(Molecular geometry would only consider the 4 covalent bonds which would lend it a distorted tetrahedral structure)

The electronic geometry of SBr4, which stands for sulfur tetrabromide, is trigonal bipyramidal.

In determining the electronic geometry of a molecule, we consider the arrangement of all the electron domains around the central atom. In the case of SBr4, sulfur (S) is the central atom, and it is bonded to four bromine (Br) atoms.

To determine the electronic geometry, we use the valence shell electron pair repulsion (VSEPR) theory. According to VSEPR, the electron domains, which include both bonding and non-bonding electron pairs, repel each other and tend to position themselves as far apart as possible to minimize repulsion.

Know more electronic geometry:

https://brainly.com/question/6329970

#SPJ6

Assuming that the solution is simply an aqueous solution so that it is purely made of NaClO4 (the solute) and water (the solvent), then I believe the dissolved species would only be the ions of NaClO4, these are:

Na+

ClO4 -

Using Graham's law and the given effusion rate, we can calculate the unknown gas's molar mass, which suggests the gas could be CH4 (methane).

The question pertains to the concept of gas effusion and Graham's law, which relates the rates of effusion of gases to their molar masses. Given that a gas escapes through a pinhole 0.155 times as fast as hydrogen gas (H2), and using the fact that hydrogen gas effuses four times as rapidly as oxygen gas (O2), one can use Graham's law to determine the molar mass of the unknown gas. Graham's law states that the rate of effusion of a gas (rate A) is inversely proportional to the square root of its molar mass (molar mass A).

Graham's law formula: rate of effusion of gas A / rate of effusion of gas B = sqrt(molar mass of gas B / molar mass of gas A).

By knowing the rate of effusion of hydrogen and the fact that the unknown gas effuses at 0.155 times the rate of hydrogen, we can use the formula to calculate the molar mass of the unknown gas. Let's assume the molar mass of hydrogen (H2) is 2 g/mol. By substituting the values into the formula, we can solve for the molar mass of the unknown gas.

Calculation: 1^(2) / 0.155^(2) = 2 g/mol / x g/mol, where x is the molar mass of the unknown gas.

Solving for x gives us the estimated molar mass.

The final step is to look for a gas with a molar mass that closely matches our calculation. The gas could well be CH4 (methane), which has a molar mass of approximately 16 g/mol.

There is a golden rule of solubility, polar solute dissolve in polar solvent and non polar solute dissolve in non polar solvent. Therefore,  apple pie is a heterogeneous mixture.

Solutions are a homogeneous mixture of two or more substances. A solution is a homogeneous mixture of solvent and solute molecules. Solvent is a substance that is in large amount in solution. solute is the substance which is in small amount in a solution. There are two types of mixture that is homogeneous and heterogeneous. Solution is a homogeneous solution.

Example: If we take sugar solution then the amount of sugar is small that is solute whereas water is in large quantity which is solvent. It is not necessary that water will be always solvent or liquid will be solvent, solid and gas can be the solvent too.  Apple pie is a heterogeneous mixture.

Therefore,  apple pie is a heterogeneous mixture.

To know more about solution, here:

https://brainly.com/question/13812915

#SPJ5

Given:

Enthalpy of formation data

Hf(C3H8) = -103.8 KJ/Mol

Hf(CO2) = -393.5 kJ/mol

Hf (H2O) = -241.82 kJ/mol

To determine:

Enthalpy of combustion of C3H8

Explanation:

The combustion reaction is:

C3H8 + 5O2 → 3CO2 + 4H2O

ΔHcombustion = ∑nHf(products) - ∑nHf(reactants)

ΔHc = [3(Hf CO2) + 4(Hf H2O)] - [Hf(C3H8) + 5Hf(O2)]

       = [3(-393.5) + 4(-241.82)] -[-103.8 + 5(0)] = -2044 kJ/mol

Ans: (a) -2044 kJ/mol

Answer:

A) –2,044.0

Explanation

Its right on edge

11.37g of copper (II) chloride dihydrate would be required to react completely with 1.20 g of aluminum.

A balanced molecular equation consists of an equal number of atoms of each element on the both reactant and product sides.

The reaction between copper (II) chloride dihydrate and aluminum has a balanced molecular equation as:

3CuCl₂.2H₂O  + 2Al  →  2AlCl₃ + 3Cu + 6H₂O

From the above equation, we can say that the 3 moles of copper (II) chloride dihydrate reacts with 2 moles of Al.

Given, the mass of aluminum = 1.20g

The number of moles of aluminum = Mass/molar mass

Number of moles of Al = 1.20/26.98 =  0.0455 mol

If  2 moles of aluminum react with copper (II) chloride dihydrate  = 3 mol

0.0445 mol of Al will react with copper (II) chloride dihydrate

= (3/2) × 0.0445 = 0.0667 mol

The molecular mass of the copper (II) chloride dihydrate  = 170.48g/mol

The mass of 0.667 mol of copper (II) chloride dihydrate will be:

= 0.0667 × 170.48

= 11.37 g

Therefore, the 1.20 grams of aluminum will react with 11.37 grams of copper (II) chloride dihydrate completely.

Learn more about the balanced molecular equations, here:

https://brainly.com/question/14017818  

#SPJ2

Chromium is a metal in nature. So when one chromium is bonded to another chromium, there is a weak intermolecular forces which helds them together which we call as “metallic bonding”.

Metallic bonding is the intermolecular force of attraction which exist between valence electrons and the metal atoms. It is considered as the sharing of various detached electrons between many positive ions, whereby the electrons serve as a "glue" which gives the substance a definite structure.

Digital thermometer readings are easier to use when performing calculations.

The breakfast consists of two eggs, two pieces of toast with one tablespoon of butter, and a 9 oz glass of orange juice, totaling 510 Calories.

Each item contributes a different amount of Calories, summed together for the final total.

To determine the total Calories in the breakfast, we need to sum the Calories from each component.

Adding these up: 140 + 160 + 100 + 110 = 510 Calories.

Summary

The breakfast consisting of two eggs, two pieces of toast with one tablespoon of butter, and a 9 oz glass of orange juice contains a total of 510 Calories.

Correct question is: Calculate how many Calories would be found in a breakfast consisting of the following:

Odor refers to the fragrance caused by one or more volatilized chemical compounds. It can be strong or weak. 
Strong odor have: Sodium Hypochlorite, Muriatic Acid, Sulphuric Acid, Ammunlom Sulfide.  Butyl ,Butyric Acid, Pyridine 

Weak Odors have Spray Glue, Dry Erase Markers, Paint cleaners. Water.

The general reaction of carboxylic acid derivatives is nucleophilic acyl substitution, in which a nucleophile reacts with the electrophilic carbonyl carbon leading to a substitution of the group attached to it.

The general reaction of carboxylic acid derivatives is nucleophilic acyl substitution. In this reaction, the carbonyl carbon of carboxylic acid derivatives is typically electrophilic. Nucleophiles can react with it, leading to the substitution of the group attached to the carbonyl carbon. Let's consider an ester as a simple example of carboxylic acid derivatives. A reaction involving an alcohol, for instance, methanol, will result in the substitution of the original alcohol group with a methanol group.

https://brainly.com/question/33908356

#SPJ2

The general reaction of carboxylic acid derivatives is nucleophilic acyl substitution .

This reaction involves the replacement of the leaving group on the carboxylic acid derivative with a nucleophile. The leaving group is typically a halogen, an alkoxy group, or an amino group. The nucleophile can be any species with a lone pair of electrons, such as an alcohol, an amine, or a water molecule.

The mechanism of nucleophilic acyl substitution is as follows:

1. The nucleophile attacks the carbonyl carbon of the carboxylic acid derivative.

2. The leaving group departs, forming a tetrahedral intermediate.

3. The intermediate collapses, forming the new acyl product and the leaving group.

The rate of nucleophilic acyl substitution depends on a number of factors, including the nature of the nucleophile, the nature of the leaving group, and the presence of any catalysts.

In general, more reactive nucleophiles and leaving groups will lead to faster reactions.

Here are some examples of nucleophilic acyl substitution reactions:

Esterification: The reaction of a carboxylic acid and an alcohol to form an ester.

Amide formation:  The reaction of a carboxylic acid and an amine to form an amide.

Hydrolysis:  The reaction of a carboxylic acid derivative with water to form a carboxylic acid and the corresponding leaving group.

Nucleophilic acyl substitution reactions are very important in organic chemistry. They are used to synthesize a wide variety of products, including pharmaceuticals, pesticides, and food additives.

To know more about carboxylic acid

https://brainly.com/question/35907854

#SPJ12

By assuming a 100g sample based on percentage by mass, we find the number of moles for each element (Carbon, Hydrogen, Nitrogen) and then express these amounts in the smallest possible ratio. The empirical formula of the compound is thus C5H7N.

Given the percentages by mass, we can assume a 100 gram sample of the compound. Therefore, we have 38.65 grams of Carbon (C), 16.25 grams of Hydrogen (H), and 45.09 grams of Nitrogen (N). We can convert these masses to moles by dividing by the atomic masses of C, H and N, which are approximately 12.01 g/mol, 1.01 g/mol and 14.01 g/mol respectively. This yields approximately 3.22 moles of Carbon, 16.09 moles of Hydrogen and 3.22 moles of Nitrogen.

In order to determine the empirical formula, we need to express these mole amounts in the lowest possible ratio. It can be seen that all of them can be divided by the smallest amount, which is 3.22. This would equal to 1 for Carbon and Nitrogen and 5 for Hydrogen. Therefore, the empirical formula of this compound is C1H5N1 or simply C5H7N.

https://brainly.com/question/32125056

#SPJ12

When methyl salicylate is added to sodium hydroxide, sodium salicylate is produced. This white solid result is due to an acid-base reaction involving the neutralization of methyl salicylate (an ester) by the base, sodium hydroxide.

The white solid that forms when methyl salicylate is added to sodium hydroxide is sodium salicylate. This reaction is an example of an acid-base reaction, specifically the neutralization of an ester with a base. Methyl salicylate is an ester of salicylic acid and methanol. In this reaction, the sodium hydroxide acts as a base to deprotonate the methyl salicylate, forming sodium salicylate and methanol. The sodium salicylate is observed as a white solid following the reaction.

When methyl salicylate is added to sodium hydroxide, a white solid called methyl salicylate sodium salt is formed.

https://brainly.com/question/34137415

#SPJ11

Final answer:

There are 24 carbon atoms in 2 moles of sucrose, as the molecular formula C12H22O11 for sucrose indicates there are 12 carbon atoms per molecule.

Explanation:

The student has asked how many carbon atoms are in 2 mol of sucrose. Sucrose has the molecular formula C12H22O11, which means there are 12 carbon atoms in a single molecule of sucrose. To find the total number of carbon atoms in 2 moles of sucrose, we multiply the number of moles by the number of carbon atoms per molecule of sucrose:

2 mol sucrose × 12 C atoms/mol sucrose = 24 C atoms.

Thus, there are 24 carbon atoms in 2 moles of sucrose.